Application of laser-induced fluorescence for determination of trace uranium, europium and samarium

Trace amounts of uranium, europium and samarium can be determined by means of laser-induced fluorescence. The fluorescence emission and excitation spectra were observed by adding fluorescence enhancing reagents. The fluorescence lifetimes of these elements were also measured. The intensities of emission were found to be linear with respect to the concentration of the element over a wide range. The detection limits for U(VI), Eu(III), and Sm(III) were established as 0.05, 0.1, and 10 ng/ml, respectively. The study suggested that this is a suitable technique for the trace determination of uranium and rare earth elements.     

Fluorimetric trace determination of cerium(III) with sodium triphosphate

Sodium triphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III). The purpose of this study was to investigate the spectrofluorimetric determination of trace amounts of Ce(III) in sodium triphosphate solution. The excitation and emission wavelengths are 303.5 nm and 353 nm respectively. Optimum sodium triphosphate concentration is found to be 0.074 g l(-1) at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range 0.001-45 mug ml(-1). The detection limit is 9.4 x 10(-4)mug ml(-1). The relative standard deviations for 30 mug ml(-1) and 0.05 mug ml(-1) Ce(III) in 0.074 g l(-1) sodium triphosphate solution are 1.1% and 0.72% respectively. Quenching effects of other lanthanides and some inorganic anions are described. This method is a direct and rapid analytical method for the determination of Ce(III) in rare earth mixtures and cerium concentrates.     

Ultratrace determination of europium in high-purity lanthanum, praseodymium and dysprosium oxides by luminescence spectrometry

A luminescence spectrometric method was developed for the determination of ultra trace amounts of europium (down to 1 x 10(-13) M) in high purity lanthanum, praseodymium and dysprosium oxides. This is based on the enhanced luminescence of europium-thenoyltrifluoroacetone (TTA)-dibenzo-18-crown-6 (DBC)-Triton X-100 in the presence of terbium. The fluorescence intensity is linear with europium concentration in the range 1 x 10(-11) - 1 x 10(-6) M under the recommended conditions. The optimized procedure is successfully utilized for the determination of ultratrace amounts of europium in lanthanium, praseodymium and dysprosium oxides.     

Spectrophotofluorometric determination of terbium and europium in potassium carbonate solution

The conditions for the spectrophotofluorometric determination of terbium and europium, in solutions of potassium carbonate, have been established. The apparent excitation and fluorescence wavelengths used, respectively, are 245 mmu and 550 mmu for terbium and 400 mmu and 620 mmu for europium. The fluorescence varies linearly with the concentration of terbium and europium in the range 0.3-70 mug, of terbium/ml and 4-800 mug of europium/ml. Large amounts of gadolinium, lutetium and yttrium do not interfere. Cerium(IV) interferes seriously.     

Spectrofluorimetric determination of trace amounts of europium(III) ion with lutetium(III)-sparfloxacin-sodium dodecyl sulfate luminescence enhancement system.

A new luminescence-enhancement system based on complex formation between europium and sparfloxacin in the presence of lutetium in a sodium dodecyl sulfate solution has been discovered. By adding a suitable amount of Lu3+ to the Eu-sparfloxacin-sodium dodecyl sulfate system, the luminescence can be enhanced by approximately 5-fold compared with that of the system without Lu3+. Under the optimum conditions, the luminescence intensity of the system is a linear function of the concentration of europium in the range of 1.0 x 10(-10) - 5.0 x 10(-7) mol L(-1). The detection limit of europium is 2.0 x 10(-13) mol L(-1) (S/N = 3). The system was used for the determination of trace amounts of europium in rare earth samples with satisfactory results.     

稀土离子对钐-铕-噻酚甲酰三氟丙酮-三正辛基膦化氧己烷萃取体系纸上荧光的增敏作用及其应用

在Sm3 + 、Eu3 + 噻酚甲酰三氟丙酮 三正辛基膦化氧己烷萃取体系中Y3 + 、La3 + 、Gd3 + 、Tb3 + 、Dy3 + 、Lu3 + 等离子可增强Sm3 + 、Eu3 + 的纸上荧光 ,其中以Tb3 + 的增敏效应最强 ,灵敏度提高了 6倍。将滤纸适当处理后可使Sm3 + 、Eu3 + 的检出限分别达到 0 .15和 0 .0 0 7ng。本法用于混合稀土氧化物中 0 .xng级的Sm3 + 和0 0 0xng级Eu3 + 的同时测定 ,结果满意     

A new spectrofluorometric probe for the determination of trace amounts of CoA in injection, human serum and pig livers.

A new spectrofluorometric method has been developed for the determination of trace amounts of coenzyme A (CoA). Using europium (Eu3+)-tetracycline (TC) complex as a fluorescent probe in the buffer solution of pH 6.80, CoA could remarkably enhance the fluorescence intensity of the Eu3+-TC complex at lambda = 612 nm after adding H(5)IO(6) and the enhanced fluorescence intensity is in proportion to the concentration of CoA. Optimum conditions for the determination of CoA were also investigated. The dynamic range for the determination of CoA is 6.08 x 10(-8) - 1.84 x 10(-5) mol L(-1) with detection limit of 4.62 x 10(-8) mol L(-1). This method is simple, practical and relatively free of interference from coexisting substances and can be successfully applied to determination of CoA in injection, human serum and pig liver samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the Eu3+-TC system and the CoA-Eu3+-TC system have been also discussed.     

Simultaneous spectrofluorimetric determination of europium, dysprosium, gadolinium and terbium using chemometric methods

A spectrofluorimetric method for the simultaneous determination of dysprosium, europium, gadolinium and terbium in ternary and quaternary mixtures by the use of pyridine-2,6-dicarboxylic acid as a chelating agent was developed. The influence of chemical variables affecting the analytical reaction was evaluated. A partial least-squares procedure and PC Quant software were used to assess data obtained from a variable number of calibration solutions and wavelengths. The ensuing method was validated by applying it to the analysis of synthetic ternary (Eu-Dy-Tb) and quaternary mixtures (Eu-Dy-Gd-Tb) over the concentration ranges 60-550 mug Eu l(-1), 30-400 mug Dy l(-1) and 30-400 mug Tb l(-1) in the former, and 20-220 mug Eu l(-1), 20-235 mug Dy l(-1), 25-230 mug Gd l(-1) and 75-230 mug Tb l(-1) in the latter. The results obtained by using the two quantitation procedures are compared. The relative errors in the determinations were less than 8% in most cases.     

Highly sensitive spectrofluorimetric determination of trace amounts NADP using Europium ion-doxycycline complex probe

A new spectrofluorimetric method was developed for determination of trace amount of Coenzyme II (NADP). Using europium ion-doxycycline (DC) as a fluorescent probe, in the buffer solution of pH 8.44, NADP can remarkably enhance the fluorescence intensity of the Eu(3+)-DC complex at lambda=612 nm and the enhanced fluorescence intensity is in proportion to the concentration of NADP. Optimum conditions for the determination of NADP were also investigated. The dynamic range for the determination of NADP is 3.3 x 10(-7) to 6.1 x 10(-6) mol l(-1) with detection limit of 6.8 x 10(-8) mol l(-1). This method is simple, practical and relatively free interference from coexisting substances and can be successfully applied to determination of NADP in synthetic water samples and in serum samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the Eu(3+)-DC system and the Eu(3+)-DC-NADP system have been also discussed.     

Photoresponsive europium(III) complex based on photochromic reaction

Luminescence properties and their photoinduced control of the electric dipole transitions of a Eu(III) complex that has photochromic triangle terarylenes ligands, tris(hexafluoroacetylacetonato)bis[4,5-bis(5-methyl-2-phenylthiazol-4-yl)-2-phenylthiazole]europium(III) (Eu(hfa)3(THIA)2), were studied. Fairly high photochromic reactivity of the ligand between the open-ring and closed-ring forms were found to be maintained even in the complex, and reversible color change could be observed many times. The photocyclization and the cycloreversion quantum yields of the Eu(hfa)3(THIA)2 were found to be 37% and 3.4%, respectively. The thermal stability of the closed-ring form of THIA ligand is significantly improved in the Eu(III) complex. The (5)D0-(7)F2 transition intensity of the Eu(III) complex with open-ring form ligands (Eu(hfa)3(THIA)2-O) is larger than that of the Eu(III) complex with closed-ring form ligands (Eu(hfa)3(THIA)2-C). The radiative rate constants of Eu(hfa)3(THIA)2-O and Eu(hfa)3(THIA)2-C are estimated to be 1.7 x 10(2) and 1.5 x 10(2) s(-1), respectively. The reversible control of the emission properties of the Eu(III) complex by the photochromic reactions is demonstrated for the first time.     

Lysozyme-enhanced europium(III)-metacycline luminescence and its application to the determination of metacycline.

A new spectrofluorometric method is described for the determination of metacycline (MC), based on modified enzyme-amplified lanthanide luminescence. Under the optimum conditions, Eu3+-MC forms a ternary complex with lysozyme in close proximity. Then lysozyme can remarkably enhance the characteristic fluorescence intensity of Eu3+ at 612 nm in metacycline-Eu3+ binary complex. The enhanced fluorescence intensity is in proportion to the concentration of MC. The limit of detection is 1.6 x 10(-8) mol L(-1), with a linear range from 6.2 x 10(-6) to 1.7 x 10(-5) mol L(-1). Interferences of other coexisting substances were studied. The developed method was successfully applied to the determination of MC in serum and urine samples. The mechanism of fluorescence enhancement was also studied.     

Synthesis and spectroscopic properties of rare earth picrate complexes with a new biphenylamide

The new ligand N-benzyl-2-{2'-[(benzyl-ethyl-carbamoyl)-methoxy]-biphenyl-2-yloxy}-N-ethyl-acetamide (L) and its complexes of rare earth picrates were synthesized. The complexes were characterized by elemental analysis, IR, UV-vis spectra and conductivity measurements. The fluorescence properties of the europium complex in solid state and in CHCl(3), ethyl acetate, acetone, acetonitrile and DMF were investigated. Under the excitation, the europium complex exhibited characteristic emissions of europium. The lowest triplet state energy level of the ligand indicates that the triplet state energy level of the ligand matches better to the resonance level of Eu(III) than Tb(III) ion.     

Simultaneous determination of samarium, europium and terbium with quinaldic acid and phenanthroline by synchronous derivative fluorimetry

Synchronous derivative fluorescence of samarium, europium and terbium complexes with quinaldic acid and phenanthroline was examined in aqueous solution. The composition of these complexes was determined. The maximum emission wavelengths are 645 nm, 617 nm and 545 nm for samarium, europium and terbium, respectively. Under the optimal experimental conditions, the fluorescence intensity was a linear function of concentration in the range of 10-250 ppm for samarium, 0.5-50 ppm for europium and 0.5-300 ppm for terbium. Simultaneous determination of samarium, europium and terbium was successfully carried out for samarium oxide and middle rare earth mixture. The precision of the method, expressed as relative standard deviation, is within 1.1-2.5%.     

Colour reaction of chromium (VI) with N,N-diethyl-1,4-phenylenediame in the presence of ethanol and cyclohexyldiamine tetraacetic acid as well as its application in the species analysis of chromium

A simple, rapid and precise spectrophotometric method for the determination of Chromium (III and IV) has been developed. The reaction of Cr(VI) with N,N-diethyl-1,4-phenylenediamine is almost complete in a twinkling, which yields a red product with a wavelength of maximum absorption at 530 nm. Beer's Law is obeyed in the Cr concentration range of 0-2.0 mug ml(-1). The molar absorptivity is 5.0x10(4) l mol(-1) cm(-1), limit of detection 0.002 mug ml(-1) and relative SD=1.13% for 5.04 mug Cr. The colouring rate and absorbance are not noticeably affected by temperature from 2 to 45 degrees C. The amounts of Cr(VI) and Cr(III) were measured by determining Cr(VI) first under the condition of masking Cr(III) by cyclohexyldiamine tetraacetic acid, and then the total amount by oxidation of Cr(III). The method was applied to the analyses of some industrial waste waters containing Cr with satisfactory results.     

Determination of trivalent europium using flow injection chemiluminescence method

A simple flow injection chemiluminescence (CL) analysis method for the determination of europium in mineral samples is reported. It is based on luminescence produced by NaIO₄-H₂O₂ CL system sensitized by [Eu(EDTA)]⁻. The relative chemiluminescence intensity of the Eu³⁺-EDTA-NaIO₄-H₂O₂ system is proportional to the amount of Eu³⁺. The optimized experimental conditions were investigated. The linear range and detection limit for Eu³⁺ are 2.0×10⁻⁷ to 1.0×10⁻⁵ and 6.2×10⁻⁸ M, respectively. The sample throughput of the method is 80 samples/h. This method was successfully applied to the determination of europium in rare earth oxides. And the mechanism of chemiluminescence is proposed.     

稀土元素悬浮液荧光体系的研究——铕-钆-二本甲酰甲烷-二乙胺体系

系统研究了明胶对铕-钇-二苯甲酰甲烷-二乙胺沉淀悬浮液荧光体系的稳定化作用和钆对铕的荧光增强效应,使荧光强度提高约2个数量级,Eu的检出限达8.5×10~(-13)mol/L(k=3),该体系可用于Gd_2O_2中痕量Eu的测定,结果满意.     

Stopped-flow kinetic determination of a binary mixture: Simultaneous determination of europium and cerium

A kinetic method is proposed for the simultaneous determination of europium(II) and cerium(III), based on their inductive action on the Cr(VI)-iodide redox reaction in weak acidic medium. The reaction rate was followed by the stopped-flow spectrophotometric technique using starch-iodine complex as indicator. The method can be used for the determination of europium and cerium after reduction with zinc metal powder in the concentration ranges 0–2.1 and 0–1.8 g/ml, respectively. The detection limits are 0.015 g/ml Eu and 0.010 g/ml Ce. 100 to 1000 times higher concentrations of other rare earth metal ions and Th⁴⁺, Al³⁺, Mn²⁺, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Pb²⁺ do not interfere. The method is applied to the determination of europium and cerium in a synthetic sample and in barium yttrium fluoride fluorescent material, with relative standard deviation of about 4%.     

The new fluorescence enhancement system Tb-N-(2-pyridinyl) ketoacetamide-Et(3)N-Zn and its application

A sensitive fluorescence enhancement system was developed for the determination of terbium. The fluorescence intensity of the Tb-N-(2-pyridinyl) ketoacetamide (PKAA) system was greatly enhanced by the addition of triethylamine (Et(3)N) and zinc nitrate in the methanol solution. The excitation and emission wavelengths were 329 and 546 nm, respectively. Under optimal conditions, the fluorescence intensities varied linearly with the concentration of Tb(3+) in the range of 7.5 x 10(-8)-8.2 x 10(-6)M with a detection limit of 6.4 x 10(-8)M. The interferences of some rare earth ions were described. This method was applied to the determination of trace amounts of terbium (III) in a synthetic rare earth oxide and a high purity Y(2)O(3) matrix. The mechanism of fluorescence enhancement was also studied.     

Development of polymeric sensing films based on a tridentate bis(phosphinic amide)-phosphine oxide for detecting europium(III) in water

A novel europium(III) membrane luminescence sensor based on a tridentate bis(phosphinic amide)-phosphine oxide, PhPO(C(6)H(4)POPhN(CH(CH(3))(2))(2))(2) (1), is described. The new luminescent complex, [Eu(1)(2)]Cl(3)2, which is formed between europium(III) and ligand 1 and has a 1 : 2 stoichiometry, has been evaluated in solution. It has the excellent spectroscopic and chemical characteristics that make it appropriate for sensing film applications. All the parameters (polymer, plasticizer, ligand and ionic additive) that can affect the sensitivity and selectivity of the membrane sensor and instrumental conditions have been carefully optimized. The best sensing response (λ(exc) = 229.04 nm, λ(em) = 616.02 nm) was observed for 33.4 : 65.1 : 1.5 (%, w/w) PVC : DOS : 1. The sensing film shows a good response time (10 min) and a very good selectivity toward europium(III) with respect to other lanthanides(III) ions, such as La, Sm, Tb and Yb. The newly-developed sensing film has a linear range from 1.6 × 10(-7) to 5.0 × 10(-6) mol L(-1) for Eu ions with a very low detection limit (4.8 × 10(-8) mol L(-1)) and good sensitivity (9.41 × 10(-7) a.u. mol(-1) L(-1)) to europium. Complexes of [Eu(1)(2)]Cl(3) (2) and [Eu(1)]Cl(3) (4) were isolated by mixing ligand 1 with Eu(Cl(3))·6H(2)O in acetonitrile at room temperature in ligand : metal molar ratios of 1 : 2 and 1 : 1, respectively. The 1 : 1 derivative is the product of thermodynamic control when a molar ratio of ligand to europium salt of 1 : 1 is used. The new compounds have been characterized in both the solid form (IR, MS-TOF, elemental analysis, TGA and X-ray diffraction) and in solution (multinuclear magnetic resonance). In both europium complexes, the ligand acts as a tridentate chelate. Thermogravimetric (TG) studies demonstrated that neither complex 2 or 4 possess any water molecules directly bound to the lanthanide metal, which corroborates the X-ray structure. The investigation of the solution behaviour of the Y(III) complexes with pulsed gradient spin-echo (PGSE) NMR diffusion measurements showed that average structures with 1 : 1 and 1 : 2 stoichiometries are retained in acetonitrile solutions.     

Neutron activation analysis of rare earth impurities in europium oxide

A neutron activation analysis method for determining Yb, Dy, Ho, Sm and La impurities in europium oxide with sensitivities of 10^?5 to 10^?7% is described. The method is based on a preliminary concentration of the rare earth elements by reducing europium(III) with zinc to europium(II), and separating the trivalent rare earth elements by extraction chromatography. After neutron irradiation, the individual radioisotopes of the rare earth elements are separated by using KU-2 cation exchange resin and ammonium α-hydroxyisobutyrate solution as the eluant.