Optimization of molar content of amidoxime and acrylic acid in UHMWPE fibers for improvement of seawater uranium adsorption capacity

Ultra-high molecular weight polyethylene (UHMWPE) fibrous adsorbents with different molar content of amidoxime (M _AO) and acrylic acid (M _AA) were prepared by graft polymerization of acrylonitrile (AN) and acrylic acid (AA), followed by amidoximation. Uranium adsorption experiments in both artificial and natural seawater were carried out to investigate the effect of M _AO and M _AA on the uranium adsorption capacity of UHMWPE fibrous adsorbents. Adsorption results showed that the UHMWPE fibrous adsorbent with M _AO = 4.27 and M _AA = 4.64 mmol/g-ads exhibited better uranium adsorption capacity in both artificial (7.01 mg-U/g-ads) and natural (0.77 mg-U/g-ads) seawater.

     

Complexes of sodium and lithium borohydrides with macrocyclic polyethers

A method for the synthesis of complexes of sodium and lithium borohydrides with crown ethers is proposed. The complexes of sodium borohydride with benzo-15-crown-5, 4′-aminobenzo-15-crown-5, dibenzo-18-crown-6, and diaza-18-crown-6 and the complexes of lithium borohydride with benzo-15-crown-5 and dibenzo-18-crown-6 are synthesized. These complexes can be used for the preparation of hydrogen in their reactions with methanol. The complex formation does not affect the purity of hydrogen formed.     

Highly efficient removal of diazinon pesticide from aqueous solutions by using coconut shell-modified biochar

This study evaluates the adsorption of diazinon from aqueous solutions onto coconut shell-modified biochar using a batch system. The amount of dosage and initial pH are the main parameters being studied to obtain maximum adsorption capacity of the probe molecules. The carbonized coconut shell biochar (BC1), activated coconut shell biochar (BC2), chemically modified phosphoric acid (BC3) and sodium hydroxide coconut shell biochar (BC4) were prepared and tested as variables in the adsorption experiment. The characteristic of biochar via SEM, EDX and BET analysis revealed the large porous of surface morphology and slight changes in the composition with high surface area (405.97 – 508.07 m²/g) by following the sequence of BC3 > BC2 > BC4. Diazinon removal percentage as high as 98.96% was achieved at pH 7 with BC3 as adsorbent dosing at 5.0 g/L. The high coefficient of determination, R² with a small value of ERRSQ and χ² error analysis present the BC1 (0.9971) and BC2 (0.9999) are best fitted with Freundlich isotherm indicates multilayer sorption onto heterogeneous surface whereby the Langmuir isotherm model is the best fitting is described of monolayer adsorption process onto the homogenous surface of BC3 and BC4. The results indicated the maximum adsorption capacity (q_m) was achieved by BC3 with 10.33 mg/g, followed by BC2 (9.65 mg/g) in accordance to the Langmuir isotherm while Freundlich isotherm showed the highest adsorption capacity (k_F) with 1.73 mg/g (L/mg)^1/n followed by BC4 with 0.63 mg/g (L/mg)^1/n at favorable adsorption isotherm (1 ≤ n ≤ 10). Thus, the results obtained depicted that BC2 and BC3 are highly efficient adsorbents and both exhibit great potential in removing diazinon from aqueous solutions.     

Polarographic Eiectroreduction of Some Complexes of Uranium with Macrocyclic Polyethers

Abstract

The polarographic behaviour of uranium(VI) in aqueous C. 1 N nitric acid medium, in the presence of some polyoxa macrocyclic ligands (15-crown-5, benzo-15-crown-5, 18-crown-6, dicyclohexyl-18-crown-6), at 25°C, was investigated. Both in the absence and in the presence of the polyoxa macrocyclic ligands, the reduction of hexavalent uranium in aqueous medium takes place in two steps, each of which involving the transfer of an electron. Under diffusion-controlled conditions, the two steps of the reduction in acid medium proceed reversibly. The results of the polarographic measurements enabled to estimate the ratio of the stability constants of the complex ions of U(111) and of U(IV) with macrocyclic polyethers.     

Separation of alkali and alkaline earth metals by polyethers using extraction chromatography. Effect of diluent

The separation of alkali and alkaline earth metals by means of an acyclic polyether, 1,13-bis(8-chinolinyl)-1, 4, 7, 10, 13-pentaoxatridecane (CPOD), and cyclic polyethers, benzo-15-crown-5 (BC), dibenzo-18-crown-6 (DBC) and dicyclohexyl-18-crown-6 (DCHC), using extraction chromatography has been studied. The alkali metals can be effectively separated using SCN⁻ ions. Different elution sequences for these groups were observed using chloroform and mesitylene and diluents for the polyethers.     

Crown ether appended cyclam receptors for cationic guests

A series of crown ether appended macrocyclic amines has been prepared comprising benzo-12-crown-4, benzo-15-crown-5, or benzo-18-crown-6 attached to a diamino-substituted cyclam. The Co(III) complexes of these three receptors have been prepared and characterized spectroscopically and structurally. Crystal structures of each receptor in complex with an alkali metal ion and structures of the benzo-12-crown-4 and benzo-15-crown-5-receptors without guest ions are reported. 2D NMR and molecular mechanics modeling have been used to examine conformational variations upon guest ion complexation. Addition of cations to these receptors results in an appreciable anodic shift in the Co(III/II) redox potential, even in aqueous solution, but little cation selectivity is observed. Evidence for complex formation has been corroborated by (23)Na and (7)Li NMR spectroscopy and electrospray mass spectrometry.     

Potentiometric study of complexation of phenylaza-15-crown-5, 4-nitrobenzo-15-crown-5 and dibenzopyridino-18-crown-6 and other derivative of 18-crowns-6 with Na+ ion in methanol

The complexation reaction of phenylaza-15-crown-5, and 4-nitrobenzo-15-crown-5, benzo-15-crown-5 and dibenzopyrdino-18-crwon-6, dibenzo-18-crown-6,dicyclohexyl-18-crown-6(cis and trans), and 18-crown-6 with Na⁺ ion in methanol have been studied by potentiometric method. The Na⁺ ion-selective electrode has been used both as indicator and reference electrode. The stoichiometry and stability constants of complexes of these crown ethers with sodium ion were evaluated by MINIQUAD program. The major trend of stability of resulting complexes of these macrocycle with Na⁺ ion varied in the order DCY18C6 > DB18C6 > 18C6 > DBPY18C6 > phenylaza-15C5 > benzo-15C5 > 4-nitrobenzo-15C5. The obtained results in particular stability constant of complexes of DBPY18C6, phenylaza-15C5 and 4-nitrobenzo-15C5 with sodium ion in comparison with other crowns ether are novel, and interesting.     

The synergistic extraction of thorium(IV) and uranium(VI) with mixtures of 3-phenyl-4-benzoyl-5-isoxazolone and crown ethers

The extraction of thorium(IV) and uranium(VI) from nitric acid solutions has been studied using mixtures of 3-phenyl-4-benzoyl-5-isoxazolone (HPBI) and dicyclohexano-18-crown-6, benzo-18-crown-6, dibenzo-18-crown-6 or benzo-15-crown-5. The results demonstrate that these metal ions are extracted into chloroform as Th(PBI)(4) and UO(2)(PBI)(2) with HPBI alone and as Th(PBI)(4) . CE and UO(2)(PBI)(2) . CE in the presence of crown ethers (CE). The equilibrium constants of the above species have been deduced by non-linear regression analysis. The addition of a CE to the metal chelate system enhances the extraction efficiency and also improves the selectivities between thorium and uranium. IR spectral data of the extracted complexes were used to further clarify the nature of the complexes. The binding to the CEs by Th(PBI)(4) and UO(2)(PBI)(2) follows the CE basicity sequence but with DC18C6 and DB18C6, steric effects become more important.     

Alkylation of benzo- and dibenzocrown ethers by various alcohols

New alkyl derivatives of benzo-15-crown-5, benzo-18-crown-6, dibenzo-18-crown-6, dibenzo-24-crown-8, and dibenzo-30-crown-10 have been obtained by their alkylation with various alcohols in the presence of polyphosphoric acid.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1461–1469, November, 1986.     

Adsorption behavior of uranium on polyvinyl alcohol-g-amidoxime: Physicochemical properties, kinetic and thermodynamic aspects

Amidoxime-based adsorbents are widely studied as the main adsorbent in the recovery of uranium from seawater.However,the adsorption rate and loading capacity of such adsorbents should be further improved due to the economic viability consideration.In this paper,polyvinyl alcohol functionalized with amidoxime(PVA-g-AO)has been prepared as a new adsorbent for uranium(Ⅵ)adsorption from aqueous solution.The physicochemical properties of PVA-g-AO were investigated using infrared spectroscopy(IR),scanning electron microscope(SEM),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).Results showed that the ligand monomers were successfully grafted onto the matrixes.The XRD and XPS analysis showed that uranium was adsorbed in metal ionic form rather than in crystal form.Uranyl(U(Ⅵ))adsorption properties onto PVA-g-AO were evaluated.The adsorption of U(Ⅵ)by PVA-g-AO was fast,with an equilibrium time of less than 50 min.Additionally the maximum adsorption capacity reached 42.84 mg/g at pH 4.0.     

Complex Formation of Crown Ethers and Cations in Water–Organic Solvent Mixtures: Part XII. Effect of the Acid–Base Properties of the Mixture on the Thermodynamic Functions of Complex Formation of Benzo-15-Crown-5 with Na<Superscript>+</Superscript> in Water–Methanol Mixtures at 298.15 K

The enthalpies of solution of benzo-15-crown-5 ether in methanol–water mixtures and methanol–water–sodium iodide systems have been measured at 298.15 K. The values of standard enthalpies of solution of benzo-15-crown-5 ether are positive in the mixtures of water and methanol within the whole range of mixture composition. The equilibrium constants of complex formation of benzo-15-crown-5 ether with the sodium cation have been determined by conductivity measurements at 298.15 K. The thermodynamic functions of the formation of these complexes have been calculated. The Gibbs energy of complex formation depends on the base–acid properties of methanol–water mixture.     

Constructing amidoxime-modified porous adsorbents with open architecture for cost-effective and efficient uranium extraction

The dense structure of polymeric matrices exposes only 10–20% of adsorption (amidoxime) groups, thus detracting from the extraction efficiency of uranium from seawater. Herein, the amidoxime-modified building units were cross-linked via the Scholl reaction into porous aromatic frameworks (PAFs). Due to the formation of open architecture, PAF adsorbents reveal a larger utilization ratio (>60%) of amidoxime groups. Consequently, PAF samples enable an ultrahigh uranium capacity of 702 mg g⁻¹, which creates a 16-fold capacity enhancement and gains a 7-fold adsorption rate improvement compared with polymer-based adsorbents. Notably, PAF solids are able to be integrated into various devices, thus realizing versatile and efficacious uranium extraction from real seawater (meeting the commercial standard ∼6 mg g⁻¹ in 21 days). In addition, the final cost using our PAF-based adsorbent is US $189.77 per kg uranium, it is in accordance with the prevailing market cost ($100–335 per kg).

The dense structure of polymeric matrices exposes only 10–20% of adsorption (amidoxime) groups, thus detracting from the extraction efficiency of uranium from seawater.     

Chromatographic separation of uranium(VI) from other elements using L-valine and poly[dibenzo-18-crown-6]

A selective and effective column chromatographic separation method has been developed for uranium(VI) using poly[dibenzo-18-crown-6]. The separation was carried out in L-valine medium. The adsorption of uranium(VI) was quantitative from 1.0 × 10⁻⁴ to 1 × 10⁻¹ M of L-valine. Amongst various eluents 2.0–8.0 M hydrochloric acid, 1.0–4.0 M sulfuric acid, 1.0–5.0 M perchloric acid, 6.0–8.0 M hydrobromic acid and 5.0–6.0 M acetic acid were found to be efficient eluents for uranium(Vl). The capacity of poly[dibenzo-18-crown-6] for uranium(VI) was 0.25 ± 0.01 mmol/g of crown polymer. Uranium(VI) was separated from number of cations and anions in binary mixtures in which most of the cations and anions show a very high tolerance limit. The selective separation of uranium(VI) was carried out from multicomponent mixtures. The method was extended to determination of uranium(VI) in geological samples. The method is simple, rapid and selective with good reproducibility (approximately ∼2%).     

Self-assembly, structures, and photophysical properties of 4,4'-bipyrazolate-linked metallo-macrocycles with dimetal clips

By employing functional diimine ligands coordinated dipalladium(II,II) or diplatinum(II,II) clips as corners and the coplanar 4,4'-bipyrazolate dianion (L(2-)) ligand as linker, a series of bipyrazolate-bridged metallo-macrocycles, namely, [M8L4](NO3)8 (M = Pd(dmbpy), 1; Pd(bpy), 2; Pt(bpy), 3a; Pd(phen), 4; Pt(phen), 5; Pd(15-crown-5-phen), 6; Pd(18-crown-6-phen), 8; Pd(benzo-24-crown-8-phen), 10a; Pt(15-crown-5-phen), 7a, Pt(18-crown-6-phen), 9a; Pt(benzo-24-crown-8-phen), 11a) and [M6L3](NO3)6 (M = Pt(bpy), 3b; Pt(15-crown-5-phen), 7b; Pt(18-crown-6-phen), 9b; Pd(benzo-24-crown-8-phen), 10b; Pt(benzo-24-crown-8-phen), 11b), have been synthesized through a directed self-assembly approach that involves spontaneous deprotonation of the 1H-bipyrazolyl ligands in aqueous solution. All these compounds have a crown-shaped cavity that can serve as host to solvent molecules and anions. The structures are characterized by elemental analysis, (1)H and (13)C NMR, ESI-MS, and in the cases of 1a (the BF4(-) salt of 1), 2a (the BF4(-) salt of 2), and 3b by single-crystal X-ray diffraction analysis. Photophysical properties for complexes 1 and 2 are discussed.     

Chromogenic benzo- and monoaza-12-crown-4, 13-crown-4 and 14-crown-4 lithium-selective crown ethers

Chromogenic benzo-12-crown-4, benzo-13-crown-4 and benzo-14-crown-4 ethers have been compared with monoaza-12-crown-4 and monoazal-13-crown-4 ethers. Of these compounds, monoaza-13-crown-4 exhibited the best analytical characteristics toward the selective determination of lithium. K(ex)Li/K(ex)Na was 525 for the monoaza-crown-4 compound.     

A polarographic study of some complexes of Tl(I) with polyoxa macrocyclic ligands

The log β₁ values at 25° for the reaction in aqueous solution of Tl(I) with 15-crown-5, benzo-15-crown-5, 18-crown-6 and dicyclohexyl-18-crown-6 (isomer cis-syn-cis) have been determined by d.c. and a.c. polarographic measurements.     

Nitration of Benzo Crown Ethers with Potassium Nitrate in Polyphosphoric Acid

A general method for the nitration of benzo crown ethers with potassium nitrate in polyphosphoric acid has been developed. Mono- and dinitro derivatives of benzo-12-crown-4, benzo-15-crown-5, dibenzo-18-crown-6, and dibenzo-24-crown-8 have been prepared. The role of complex formation in the regioselective tendency for the nitration of dibenzo-18-crown-6 has been demonstrated.     

Mass-spectrometric investigation of ionophoric derivatives of benzo- and dibenzocrown ethers. 4. 4′-Acyl derivatives of benzo-15-crown-5 and benzo-18-crown-6

The mass spectra of 4-acyl derivatives of benzo-15-crown-5 and benzo-18-crown-6 were studied by the method of direct analysis of the daughter ions (DADI). It was established that the fragmentation of the M⁺ ions of the investigated compounds under electron impact proceeds via the scheme of the McLafferty rearrangement with the simultaneous elimination of ethylene oxide. The degree of occurrence of the McLafferty rearrangement increases with an increase in the length of the side chain.See [3] for communication 3.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 989–901, July, 1987.     

Formation Constants of Complexes of Monovalent Cations with Benzocrown Ethers in Nitromethane

The complexation reactions between the macrocyclic polyethers dibenzo-18-crown-6, benzo-18-crown-6, benzo-15-crown-5 and polyethers bearing a stilbene unit with alkali metal and silver cations have been studied conductometrically in nitromethane. The formation constants of 1 : 1 and 1 : 2 (metal : ligand) complexes were determined and found to decrease with increasing cation diameter. The stability of the stilbene crown – metal cation complexes is lower than for complexes of other investigated crown ethers with analogous cations. There seem to be some effects of double bond-silver ion interactions.     

A Polarographic Study on Some Complexes of Pb2+ and Cd2+ with Macrocyclic Polyethers (Crown Ethers)

Abstract

Complexation constants of Pb²⁺ and Cd²⁺ nitrates with five crown compounds (18-crown-6, dicyclohexyl-18-crown-6, benzo-15-crown-5, dibenzo-24-crown-8 and 12-crown-4), have been determined by d.c. and a.c. polarographic measurements in aqueous medium using 0.1 M HNO₃ as supporting electrolyte. The complexes of lead with 18-crown-6 and dicyclohexyl-18-crown-6 are very stable which may be attributed to the partially covalent bonds formed by this metal ion.