Static fatigue fracture of polyethylene: A morphological analysis

The fracture properties of a number of high-density polyethylenes were evaluated and related to their morphology. The resistance to initiation of fracture is related to the resistance to voiding of the materials and the rate of coalescence of voids. The propensity of the materials to void has been shown to be related to the size of the amorphous region. The resistance to propagation of the fracture is also related to the above factors as well as the ease of stretching and rupture of fibrils. The ease of fibril formation has been shown to be related to the degree of perfection of the crystallites.     

How mobile NMR can help with the conservation of paintings

The conservation of paintings is fundamental to ensure that future generations will have access to the ideas of the grand masters who created these art pieces. Many factors, such as humidity, temperature, light, and pollutants, pose a risk to the conservation of paintings. To help with painting conservation, it is essential to be able to noninvasively study how these factors affect paintings and to develop methods to investigate their effects on painting degradation. Hence, the use of mobile nuclear magnetic resonance (NMR) as a method of investigation of paintings is gaining increased attention in the world of Heritage Science. In this mini-review, we discuss how this method was used to better understand the stratigraphy of paintings and the effect different factors have on the painting integrity, to analyze the different cleaning techniques suitable for painting conservation, and to show how mobile NMR can be used to identify forgeries. It is also important to keep in mind its limitations and build upon this information to optimize it to extend its applicability to the study of paintings and other precious objects of cultural heritage.     

Data shaving: a focused screening approach

The number of compounds available for evaluation as part of the drug discovery process continues to increase. These compounds may exist physically or be stored electronically allowing screening by either actual or virtual means. This growing number of compounds has generated an increasing need for effective strategies to direct screening efforts. Initial efforts toward this goal led to the development of methods to select diverse sets of compounds for screening, methods to cluster actives into related groups of compounds, and tools to select compounds similar to actives of interest for further screening. In this work we extend these earlier efforts to exploit information about inactive compounds to help make rational decisions about which sets of compounds to include as part of a continuing screening campaign, or as part of a focused follow-up effort. This method uses the information from inactive compounds to "shave" off or deprioritize compounds similar to inactives from further consideration. This methodology can be used in two ways: first, to provide a rational means of deciding when sufficient compounds containing certain structural features have been tested and second as a tool to enhance similarity searching around known actives. Similarity searching is improved by deprioritizing compounds predicted to be inactive, due to the presence of structural features associated with inactivity.     

Investigation of isothiocyanate addition to alkylidene derivatives of malononitrile and cyanoacetic acid esters

Addition of arylisothiocyanates to active methylene compounds leads to a variety of compounds depending on the structure of the starting material and conditions used to conduct the addition. Addition of arylisothiocyanate to 1c leads to a pyrido[2,3-d]pyrimidine resulting from addition of a second mole of cyanate to the initial adduct. Addition of arylisothiocyanate to 1b led to a mixture of pyridine and thiopyran adducts, while addition to 1a led to open chain structures.     

Identification of ligands that target the HCV-E2 binding site on CD81

Hepatitis C is a global health problem. While many drug companies have active R&D efforts to develop new drugs for treating Hepatitis C virus (HCV), most target the viral enzymes. The HCV glycoprotein E2 has been shown to play an essential role in hepatocyte invasion by binding to CD81 and other cell surface receptors. This paper describes the use of AutoDock to identify ligand binding sites on the large extracellular loop of the open conformation of CD81 and to perform virtual screening runs to identify sets of small molecule ligands predicted to bind to two of these sites. The best sites selected by AutoLigand were located in regions identified by mutational studies to be the site of E2 binding. Thirty-six ligands predicted by AutoDock to bind to these sites were subsequently tested experimentally to determine if they bound to CD81-LEL. Binding assays conducted using surface Plasmon resonance revealed that 26 out of 36 (72 %) of the ligands bound in vitro to the recombinant CD81-LEL protein. Competition experiments performed using dual polarization interferometry showed that one of the ligands predicted to bind to the large cleft between the C and D helices was also effective in blocking E2 binding to CD81-LEL.     

Adhesion between graphite and modified polyester surfaces: a theoretical study

This study examines the adhesion of graphite to functionalized polyester surfaces using a range of qualitative and quantitative measures of theoretical adhesion. Modifications to the polyester surfaces include the addition of hydroxyl, carboxyl, or fluorine substituents with coverages of 0.4 and 0.9 groups per nm(2). In each case, the introduction of substituents to the surface of the polyester was calculated to lead to reduced adhesion to graphite. Effects of surface relaxation on adhesion are studied by employing different simulation protocols. The theoretical results suggest one mechanism to reduce adhesion to carbonaceous solids is to increase atomic roughness using strongly hydrophilic or alternatively strongly hydrophobic substituents.     

Characterization of diamond surface terminations using electrochemical grafting with diazonium salts

A new characterization technique to identify qualitatively diamond surface terminations and to measure quantitatively the density of hydrogen atoms bonded to the diamond surface is introduced using electrochemical grafting of diamond with diazonium salts. The cathodic peak potentials for the grafting of nitrophenyl layers reveal qualitative information about surface terminations ranging from –H, to –OH to –O–. The charges consumed during the conversion of nitro- to aminophenyl are used to calculate quantitatively the density of hydrogen atoms bonded to the diamond surface. As hydrogen is generally very difficult to detect by other methods like X-ray Photon Spectroscopy, this new method will add significantly to the understanding of surface related properties of transducers.     

Addition of some α-halo ethers to unsaturated compounds

Summary The addition was carried out of 2-acetoxyethyl chloromethyl ether and of 2-chloroethyl chloromethyl ether to isobutene, to allyl chloride, to styrene, and to allyl acetate and also of 2-acetoxyethyl chloromethyl ether to butadiene and to ethyl cinnamate.     

Modification of Cyclodextrins for Use as Artificial Enzymes

The magical powers of enzymes have been attributed to their ability to bind specific substrates and catalyze reactions of the bound substrate. Artificial enzymes synthetically mimic the binding and the catalytic site to produce molecules that are not only smaller in size but also potentially have similar activity to the real enzymes. The main objective of our research is to create artificial redox enzymes by using cyclodextrins as binding sites and attaching flavin derivatives as the catalytic site. We have developed a strategy to attach a catalytic site to cyclodextrin exclusively at the 2-, 3- or the 6-position. The evaluation of the artificial enzyme in which flavin is attached to the 2-position gives a 647-fold acceleration factor. Although this is modest compared to those of real enzymes (which can have acceleration factors of a trillion), the artificial enzymes allow us to understand the elements that contribute to the incredible catalytic power of enzymes.     

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.     

THE MECHANISM OF PHOTOCHEMICAL ADDITION OF CYSTEINE TO URACIL AND FORMATION OF DIHYDROURACIL

Abstract— A proposed mechanism for the photochemical addition of L -cysteine to uracil with the concurrent formation of dihydrouracil is shown to proceed through the triplet excited state of uracil which can abstract hydrogen atoms from cysteine to form dihydrouracil. This triplet state is the same one as that leading to photodimerization. The thiyl radicals generated add to ground state uracil molecules. The data permit a re-evaluation of the quantum yield for intersystem crossing of uracil in water which shows dimerization in aqueous solution to have a maximum efficiency of 56 per cent. The formation of the cross-adduct and dihydrouracil may be sensitized but the efficiency of the reaction is related to the ability of the sensitizer to be photoreduced and not to its triplet energy.     

Characterization of Langmuir-Blodgett film using differential charging in X-ray photoelectron spectroscopy

Differential charging is often regarded as a problem in X-ray photoelectron spectroscopy (XPS) studies, especially for insulating or partially conducting samples. Neutralization techniques have been developed to circumvent this effect. Instead of neutralizing the positive charge, which is often the technique to obtain good quality data, it is possible to exploit this phenomenon to get useful information about the sample. An attempt is made here to use this differential charging to study the mono- and multilayer Langmuir-Blodgett (LB) films of cadmium arachidate on silicon substrate. The surface potential was probed by measuring XPS line shift with respect to their neutral position and was found to have correlation with the thickness of the films. No differential charging was observed in the monolayer LB film where there was only one layer of cadmium headgroup. Significant differential charging was observed for multilayer films, the total charging as well as the differential charging in these films increase with increasing number of layers. Angle-resolved XPS measurements were performed to obtain additional information about the structure of the films. Charging of the upper layer of the films close to the vacuum interface was found to be less compared to that of the interior. The discrete cadmium layers were found to be more differentially charged compared to the continuous hydrocarbon stacks in the multilayer LB films. Charging of the discrete cadmium layers has been utilized to obtain quantitative information of the multilayer LB films.     

Exploring supramolecular interactions and architectures by scanning force microscopies

The development of new methodologies based on scanning force microscopy (SFM) has made it possible to map topographies, chemical functionalities, and numerous other physicochemical properties of complex assemblies, to unravel dynamic processes, to measure forces generated along a reaction coordinate, to nanopattern surfaces and to nanomanipulate objects. This tutorial review highlights the most recent applications of these SFM-based capabilities, on and beyond imaging, to the exploration of supramolecular interactions and architectures, to the fabrication of smart materials and to the optimization of (nano)devices.     

Precision of Flash Pyrolysis-GC-MS Analysis: Experimental Evaluation of the Sources of Variability

The present study was carried out to evaluate the precision and to identify significant sources of variability in flash pyrolysis-GC-MS experiments. The analysis of variance has been applied to the example of polyethylene pyrolysis to estimate the impact of several controlled factors: sample handling, flash pyrolysis filament ageing and calibration. It was demonstrated that to get the best precision in experimental results, it is recommended to set the operator to reduce the impact of sample handling procedure and the filament to avoid variability due to changes in filament characteristics. In comparison, filament ageing and filament calibration are shown to influence in a limited extent the experimental results.     

加深对现代分析仪器的认识提高使用与维修水平

熟悉了解仪器的总体结构性能,剖析零部件的功能,注重基础研究,弄清仪器的安全联锁保护是提高仪器使用与维修水平的关键;重视仪器的故障分析与判断、准确及地维修、合理地使用保养是保持仪器良好运行状态的唯一手段;建立仪器档案,定期进行性能测试是了解仪器,把握仪器运行脉搏、充分利用仪器的前提。     

Size-Exclusion Chromatography: A Twenty-First Century Perspective

Now in its sixth decade, size-exclusion chromatography (SEC) remains the premier method by which to determine the molar mass averages and distributions of natural and synthetic macromolecules. Aided by its coupling to a variety and multiplicity of detectors, it has also shown its ability to characterize a host of other physicochemical properties, such as branching, chemical, and sequence length heterogeneity size distribution; chain rigidity; fractal dimension and its change as a function of molar mass; etc. SEC is also an integral part of most macromolecular two-dimensional separations, providing a second-dimension size-based technique for determining the molar mass of the components separated in the first dimension according to chemical composition, thus yielding the combined chemical composition and molar mass distributions of a sample. While the potential of SEC remains strong, our awareness of the pitfalls and challenges inherent to it and to its practice must also be ever-present. This Perspective aims to highlight some of the advantages and applications of SEC, to bring to the fore these caveats with regard to its practice, and to provide an outlook as to potential areas for expansion and growth.

     

IPG with electrodic plateaus (and other unusual procedures for 2-DE)

We describe some simple changes to the geometry of the IPG strips that make them suitable to the loading of very large sample volumes and of high-salt solutions. Of special relevance is the possibility of using strips with immobilized plateau(s) to either side of the gradient, or to both, also in connection with in-gel rehydration protocols and focusing in stock trays. The only requirement to achieve this is to leave the all-ready-made attitude and go back to custom polymerization of the IPGs in one's laboratory.     

杨石先对农药化学学科的重要贡献及其学术思想

杨石先先生一生献身于我国的教育事业与化学学科的发展,在62年中为我国培养了无数高质量的科教人才。他除了长期担任南开大学校长之外, 还创建了我国大学第一个专职研究所,即元素有机化学研究所。他率先开展了我国元素有机化学与农药化学的科学研究,领导了元素有机化学国家重点实验室的建立,是我国元素有机化学和农药化学的奠基人和开拓者。他倡导用有机化学的专业知识,科学和系统地开展农药化学研究,组建队伍获得20项科研成果,发表上百篇科学与论述性论文,为我国开展自主创新农药研究事业作出重要贡献。在农药化学学科的学术思想中,他强调要弄清该学科的交叉性、系统性和内在规律性,倡导要学习国际先进经验,要结合国情自主创新,要为国家经济服务,要对世界农药科技做出贡献。他毕生对人才培养给予了特别的重视,为我国科技事业持续发展作出了重大贡献。     

A new method for estimating the importance of hydrogen-bonding groups in the binding site of a protein

We introduce a new method to estimate the importance of hydrogen-bonding sitepoints in the binding site of a protein as part of a structure-based design strategy. Our method identifies hydrogen-bonding sitepoints within a binding pocket and ranks them according to both the accessibility of their hydrogen bonding regions to incoming ligands and their hydrogen-bonding strength. The combination of these components produces a prioritised list of sitepoints that are more likely to be involved in hydrogen bonding with an incoming ligand. A dataset of known protein-ligand interactions was used to compare the prioritisation of sitepoints identified by our method with those observed to be engaged in hydrogen bonding in their crystal structures. Our method was able to remove those sitepoints unable to bind the ligand due to a low accessibility or an unfavourable orientation and to award significantly higher hydrogen-bonding ranking values to those sitepoints observed to form hydrogen bonds. Our method can thus be used to identify hydrogen-bonding sitepoints that should be targeted preferentially in a drug design strategy.     

Hygienic aspects related to burial

Burial grounds are generally provided by local authorities in cemeteries (subject to planning consent and to compliance with any considerations for environmental health). Their design has been submitted to studies of hydrogeological characteristics of soil with regard to its ability to purify wastewater coming from corpse decomposition, its ability to avoid the infiltration of pollutants in groundwater, and its ability to skeletonize buried corpses within the given times foreseen by the law in force. Greater environmental awareness has necessitated that new and existing burial grounds are assessed to determine the environmental load which they could release to soil or any downstream component. This problem arises in countries where there is a high density of built-up areas, a custom of disposing of the dead by burial, a lack of available spaces and suitable soils to designate as burial grounds. This paper reports some results from a study carried out on ground lands of Italy in order to revise articles 82 and 83 of the Decree No 285 of 1990 in force in relation to burial grounds. Soil permeability to water and air is a parameter of critical importance in relation to purification and/or diffusion of leachates from inhumed corpses in the soil, and in relation to its influence on the time necessary to completely skeletonize a human corpse.