Thermal behaviour and properties of Na<Subscript>2</Subscript>O-TiO<Subscript>2</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Differential scanning calorimetry (DSC) and thermomechanical analysis (TMA) were used to study the thermal behaviour of (50-x)Na₂O-xTiO₂-50P₂O₅ and 45Na₂O-yTiO₂-(55-y)P₂O₅ glasses. The addition of TiO₂ to the starting glasses (x=0 and y=5 mol% TiO₂) resulted in a nonlinear increase of glass transition temperature and dilatation softening temperature, whereas the thermal expansion coefficient decreased. All prepared glasses crystallize under heating within the temperature range of 300–610°C. The contribution of the surface crystallization mechanism over the internal one increases with increasing TiO₂ content. With increasing TiO₂ content the temperature of maximum nucleation rate is also gradually shifted from a value close to the glass transition temperature towards the crystallization temperature. X-ray diffraction measurements showed that the major compounds formed by glass crystallization were NaPO₃, TiP₂O₇ and NaTi₂(PO₄)₃. The chemical durability of the glasses without titanium oxide is very poor, but with the replacement of Na₂O or P₂O₅ by TiO₂, it increases sharply.     

Trends in the cation distribution in the structures of the compounds forming in the Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> systems

The cationic networks in the structures of the initial oxides and all binary and ternary compounds forming in the Ln₂O₃-GeO₂-P₂O₅ systems have been studied. In the phase diagrams of the Nd₂O₃-GeO₂-P₂O₅ and Er2O₃-GeO₂-P₂O₅ systems, the regions of the structural influence of individual compounds with topologically identical cationic networks—anisotropic (A), combined (C), and isotropic (I)—are united into common areas. The A: C: I area ratio is 1: 1: 1 in the neodymium system and 1.7: 1: 3.4 in the erbium system.     

Preparation and radioluminescent characteristics of Li<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaF<Subscript>2</Subscript> glasses doped with Ce(III) and Gd(III)

A method has been developed for the preparation of homogeneous moisture-resistant glasses with the composition Li₂O-B₂O₃-P₂O₅-CaF₂ : Ce³⁺-Gd³⁺. Energy transfer from Gd³⁺ to Ce³⁺ was noted in a study of the radioluminescence spectra of these samples using ²⁴¹Am as the excitation source (60 keV). The decay time of the Ce³⁺ radioluminescence in the glasses obtained was 20-25 ns.     

Glasses in the CuNbOF<Subscript>5</Subscript>-BaF<Subscript>2</Subscript> and CuNbOF<Subscript>5</Subscript>-PbF<Subscript>2</Subscript> systems

Nonhygroscopic, colored glasses have been synthesized in the CuNbOF₅-BaF₂ and CuNbOF₅-PbF₂ systems proceeding from crystals of the complex compound CuNbOF₅ · 4H₂O. The glasses have been studied structurally and thermally. The crystallization resistance of the glasses has been studied as a function of glass composition. Lead difluoride glasses are more stable than barium difluoride glasses of the same composition. These glasses have lower glass-transition temperatures than the binary glasses formed in the NbO₂F-BaF₂ system. The glass structure is built of Nb(O,F)₆ polyhedra, which are linked in glass networks through oxygen bridges. Modifier cations influence both the structure of glass networks and the linkage of polyhedra.     

The effect of PO<Subscript>2,5</Subscript> and AlO<Subscript>1,5</Subscript> additions on structural changes and crystallization behavior of SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> sol-gel derived glasses and thin films

SiO₂-TiO₂-PO_2,5 (STP) and SiO₂-TiO₂-AlO_1,5 (STA) glasses were prepared by sol-gel processing. Their infrared absorption spectra (IR), differential thermal analysis curves (DTA) and X-ray diffraction patterns (XRD) have been recorded. In the SiO₂-TiO₂ system, the chemical homogeneity of the sol-gel glass could be evaluated by the relative concentration of Si-O-Ti heterocondensation comparing to Si-O-Si homocondensation. For the STA system, a gradual decrease of the Si-O-Ti/Si-O-Si band ratio (based on IR spectra) with the addition of Al₂O₃ is observed, with the simultaneous formation of Si-O-Al and Ti-O-Al bounds, i.e Al₃ ⁺ ions are dissolved in the SiO₂-TiO₂ glass matrix and do not promote glass-in-glass phase-separation in the composition range of 0–15 mol% AlO_1.5. In the STP system, on the other hand, P=O bond IR stretch in the ternary glasses indicates that P=O free PO₂O_2/2 ⁻ tetrahedra are formed, rather than the double bonded POO_3/2 tetrahedra that usually occur in binary SiO₂-P₂O₅ glasses. It can be concluded that SiO₂-TiO₂-P₂O₅ glass separates into a SiO₂-rich phase and a TiO₂(P₂O₅)-rich phase. During heat-treatment in STA system only anatase precipitates, even at T ~ 1,000 °C, while in for STP, anatase (TiO₂) or (TiO)₂P₂O₇ (TOP) crystals precipitate at ~600 °C, depending on the P₂O₅ concentration. The major crystal phase, cristobalite, precipitated at ~1,000 °C and at ~1,200 °C, the P-containing phase melts.     

Thermal stability and surface structure of Mo/CeO<Subscript>2</Subscript> and Ce-doped Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

In order to explore the influence of CeO₂ on the structure and surface characteristics of molybdena, an investigation was undertaken by using N₂ adsorption (BET method), thermal analysis and in-situ diffuse reflectance infrared (DRIFT) techniques. In this work, the Mo/CeO₂ and Ce-Mo/Al₂O₃ samples were prepared by impregnation and co-precipitation methods with high Mo loadings. Combining the results one may notice that the presence of ceria led to the increase of polymerized surface Mo species so as to forming Mo-O-Ce linkages besides the formation of coupled O=Mo=O bonds indicative of polymeric MoO₃. From thermal analysis, it can be inferred that Mo/Al₂O₃ is the thermally most stable material in the temperature range used in the experiment (up to 900°C), whereas Ce-Mo/Al₂O₃ and Mo/CeO₂ samples undergo morphological modifications above 700°C resulting in lattice defects, which motivate the mobility of Mo and Ce ions and thus enhance the possibility of interaction between them. Additionally, their activity towards CO adsorption needs reduced ceria and molybdena containing coordinatively unsaturated sites (CUS), oxygen vacancies and hydroxyl groups to form various carbonate species.     

Influence of B<Subscript>2</Subscript>O<Subscript>3</Subscript> on the structure and crystallization of soil active glasses

Glasses of the SiO₂–P₂O₅–K₂O–MgO–CaO–B₂O₃ system acting as nutrients carriers in the soil environment were synthesised by the melt-quenching technique. Thermal properties were studied using DTA/DSC methods and the influence of B₂O₃ and P₂O₅ content on thermal stability and crystallization process of these glasses was examined. The structure of the glass network was characterized by FTIR, ³¹P, and ¹¹B MAS NMR. The chemical activity of the glasses in the 2 mass% citric acid solution was measured by the ICP-AES method. The analysis indicated that the formation of P–O–B units with chemically stable tetrahedral borate groups decreases the glass solubility in conditions simulating the soil environment.     

Thermal behaviour and fragility of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript>-containing zinc borophosphate glasses

Thermal behaviour of the glass series (100-x)[50ZnO-10B₂O₃-40P₂O₅]·xSb₂O₃ (x=0-42 mol%) and (100-y)[60ZnO-10B₂O₃-30P₂O₅]·ySb₂O₃ (y=0-28 mol%) was investigated by DSC and TMA. The addition of Sb₂O₃ results in a decrease of the glass transition temperature and crystallization temperature in both compositional series. All glasses crystallize on heating in the temperature range of 522–632°C. Thermal expansion coefficient of the glasses monotonously increases with increasing Sb₂O₃ content in both series and varies within the range of 6.6–11.7 ppm °C⁻¹. From changes of thermal capacity within the glass transition region it was concluded that with increasing Sb₂O₃ content the ‘fragility’ of the studied glasses increases.     

The phase diagram of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript>-Ag<Subscript>2</Subscript>O system

The results concerning the synthesis, structure and thermal properties of V₂O₅-MoO₃-Ag₂O samples in the molybdenum rich region of ternary system are presented in the form of quasi-binary systems: β-AgVO₃-β-Ag₂MoO₄, AgVMoO₆-MoO₃, AgVMoO₆-Ag₂Mo₄O₁₃, AgVMoO₆-Ag₂Mo₂O₇, AgVMoO₆-β-Ag₂MoO₄ and also of the system in which at V₂O₅/MoO₃ molar ratio 3:7 the content of Ag₂O was variable. The ternary phase AgVMoO₆ was not described earlier in the literature.     

Phase diagram of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript>-Ag<Subscript>2</Subscript>O system

The results concerning the synthesis, structure and thermal properties of V₂O₅-MoO₃-Ag₂O samples in the vanadium rich region of ternary system are presented in the form of quasi-binary phase diagrams in which at constant V₂O₅/MoO₃ molar ratios, equal 9:1, 7:3 and 1:1, the content of Ag₂O was variable. A new ternary phase isostructural with NaVMoO₆ has been detected in the investigated system.     

Glass formation in the Li<Subscript>2</Subscript>O-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-TeO<Subscript>2</Subscript> system

In the Li₂O-Ta₂O₅-TeO₂ system, the boundaries of the glass region have been determined. The electrical and spectral properties of glasses and crystalline materials have been investigated.     

Five-component reciprocal systems Na,K∥Cl,CO<Subscript>3</Subscript>,MoO<Subscript>4</Subscript>,WO<Subscript>4</Subscript> and Na,K∥F,CO<Subscript>3</Subscript>,MoO<Subscript>4</Subscript>,WO<Subscript>4</Subscript>

Five-component reciprocal systems Na,K∥Cl,CO₃,MoO₄,WO₄ and Na,K∥F,CO₃,MO₄,WO₄ have been studied by differential thermal analysis (DTA) and X-ray powder diffraction (XPD). The systems have been triangulated to phase simplexes. The main reciprocal and complex-formation reactions have been revealed. The stability of [Na,K]₂CO₃, Na₂[Mo,W]O₄, and K₂[Mo,W]O₄ binary solid solutions and the nonexistence of quintuple invariant points in the title systems have been verified.     

Phase equilibria in the Ce<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Ce₂O₃-K₂O-P₂O₅ ternary system has been investigated by thermoanalytical methods (DTA, DSC), powder X-ray diffraction, XPS and IR spectroscopy. The existence of three double potassium-cerium(III) phosphates has been confirmed and a new binary phosphate K₄Ce₂P₄O₁₅ has been found. Phase diagram and isothermal section at room temperature of the system Ce₂O₃-K₂O-P₂O₅ have been presented.     

Electronic structure and chemical bonding in K<Subscript>2</Subscript>V<Subscript>3</Subscript>O<Subscript>8</Subscript>

The calculations of the electronic structure of layered polyvanadate K₂V₃O₈ were made employing the spin-polarized tight-binding LMTO method. Calculated magnetic moment for K₄V₆O₁₆ compound phase equals 1.97 μ_B. V-O interactions were established to be dominating in the chemical bonding generation in this polyvanadate according to the estimated crystal orbital overlap population. The covalent bonds V(2)-V(2) in V(2)₂O₇ groups and electron density localization on vanadium atoms in isolated pyramids V(1)O₅ were found.     

Selective Catalytic Reduction of NO by NH<Subscript>3</Subscript> over MoO<Subscript>3</Subscript> Promoted Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst

A series of MoO₃ doped Fe₂O₃ catalysts prepared by the co-precipitation method were investigated in the selective catalytic reduction of NO by NH₃ (NH₃-SCR). The catalysts displayed excellent catalytic activity from 225 to 400°C and high tolerance to SO₂/H₂O poisoning at 300°C. To characterize the catalysts the N₂-BET, XRD, Raman, NO-TPD, NH₃-TPD and in situ DRIFTS were carried out. It was found that the main reason explaining a high NH₃-SCR performance might be the synergistic effect between Fe and Mo species in the catalyst that could enhance the dispersion of Fe₂O₃ and increase NH₃ adsorption on the catalyst surface.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

Some studies on the phase formation and kinetics in TiO<Subscript>2</Subscript> containing lithium aluminum silicate glasses nucleated by P<Subscript>2</Subscript>O<Subscript>5</Subscript>

Lithium aluminum silicate (LAS) glasses of compositions (wt%) 10.6Li₂O–71.7SiO₂–7.1Al₂O₃–4.9K₂O–3.2B₂O₃–1.25P₂O₅–1.25TiO₂ were prepared by the melt quench technique. Crystallization kinetics was investigated by the method of Kissinger and Augis–Bennett using differential thermal analysis (DTA). Based on the DTA data, glass ceramics were prepared by single-, two-, and three-step heat treatment schedules. The interdependence of different phases formed, microstructure, thermal expansion coefficient (TEC) and microhardness (MH) was investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermo-mechanical analysis (TMA), and microhardness (MH) measurements. Crystallization kinetics revealed that Li₂SiO₃ is the kinetically favored phase with activation energy of 91.10 kJ/mol. An Avrami exponent of n = 3.33 indicated the dominance of bulk crystallization. Based upon the formation of phases, it was observed that the two-stage heat treatment results in highest TEC glass ceramics. The single-step heat treatment yielded glass ceramics with the highest MH.     

Effect of the mechanochemical treatment of a V<Subscript>2</Subscript>O<Subscript>5</Subscript>/MoO<Subscript>3</Subscript> oxide mixture on its properties

The mechanochemical treatment of a V₂O₅/MoO₃ oxide mixture (V/Mo = 70/30 at %) was performed in planetary and vibratory mills under varying treatment times and media. The resulting samples were characterized using XRD analysis, micro-Raman spectroscopy, and XPS; their specific surface areas and catalytic activities in n-butane and benzene oxidation reactions were determined. It was found that the treatment of the oxide mixture in water resulted in chaotic degradation of the parent oxides, a decrease in crystallite sizes, and an increase in the specific surface area at a sufficiently uniform oxide distribution over the sample. The treatment in ethanol was accompanied by an anisotropic deformation of the V₂O₅ crystal by layer sliding in parallel to the vanadyl plane (010) and a chaotic degradation of MoO₃ crystals. This process was accompanied by the partial nonuniform supporting of vanadium oxide crystals onto the surface of molybdenum oxide to increase the V/Mo ratio on the sample surface. In this case, the particle size of oxides decreased and the specific surface areas of samples increased. It was found that the treatment of the oxide mixture in air (dry treatment) resulted in the most significant decrease in the sizes of V₂O₅ and MoO₃ crystals and a growth in the specific surface area. The amorphization of the parent oxides and the formation of MoV₂O₈ were observed as the treatment time was increased; in this case, an excess of amorphous vanadium oxide was supported onto the surface of this compound. It was found that, in all types of mechanochemical treatment, the binding energies of the core electrons of vanadium and molybdenum remained almost unchanged to indicate the constancy of the oxidation states of these elements. Mechanochemical treatment resulted in an increase in the activity of the samples in n-butane and benzene oxidation reactions and in an increase in the selectivity of maleic anhydride formation. In this case, an increase in the specific catalytic activity of the samples correlated with a decrease in the crystallite size of vanadium oxide, whereas selectivity correlated with an increase in the relative concentration of the V₂O₅ plane (010). In these reactions, samples after dry treatment exhibited a maximum activity, which can be related to the formation of MoV₂O₈.     

EPR investigation and thermal study of yA<Subscript>2</Subscript>O-(1-<Emphasis Type="Italic">y</Emphasis>)[0.25(WO<Subscript>3</Subscript>)<Subscript>2</Subscript>-0.75(P<Subscript>2</Subscript>O<Subscript>5</Subscript>)] (A=Li,Na) glasses

Summary Glasses belonging to the series yA₂O-(1-y)[0.25(WO₃)_2-0.75P₂O₅] (y=0.10-0.60) are elaborated. DTA experiments reveal that the glass-network of the glasses are broken with increasing of modifier content. EPR spectra show the presence of two signals due to W⁵⁺ and Mo⁵⁺, as impuritie. The intensity of these EPR centres decreases when the concentration of A₂O increases. The variation of T_g upon the modifier content is ascribed to structural changes occurring in the matrix of these glasses.