Enhanced photo-catalytic activity of TiO2 nanostructured thin films under solar light by Sn and Nb co-doping

In this study, preparation of Sn and Nb co-doped TiO₂ dip-coated thin films on glazed porcelain substrates via sol–gel process have been investigated. The effects of co-doping content on the structural, optical, and photo-catalytic properties of applied thin films have been studied by X-ray diffraction (XRD), field emission SEM (FE-SEM), high resolution transmission electron microscopy (HR-TEM), and UV–Vis absorption spectroscopy. Surface chemical state of thin films was examined by atomic X-ray photoelectron spectroscopy (XPS). XRD results suggest that adding impurities has a great effect on the crystallinity and particle size of TiO₂. Titania Rutile phase formation in thin film was promoted by Sn⁴⁺ addition but was inhibited by Nb⁵⁺ doping. The prepared co-doped TiO₂ photo-catalyst films showed optical absorption edge in the visible light area and exhibited excellent photo-catalytic ability for degradation of methylene blue (MB) solution under solar irradiation. Comparison with undoped and Sn or Nb-doped TiO₂, codoped TiO₂ shows an obviously higher catalytic activity under solar irradiation.     

Enhanced photoinduced super-hydrophilicity in sol–gel TiO2 thin films with co-doped Sn/Nb

In this work, Sn and Nb co-doped TiO₂ were coated on glazed porcelain substrates via sol–gel dip coating method. Field emission-scanning electron microscopy, transmission electron microscopy, and UV–vis spectrophotometer were used to evaluate thickness and optical properties of the thin films. Surface chemical state of thin films was examined by atomic X-ray photoelectron spectroscopy. Water contact angle on the film surfaces was measured by a contact angle analyzer under solar light irradiation. The optical results indicated that Sn/Nb dopant in TiO₂ thin film changed the absorption edge from ultraviolet to visible light and exhibited excellent photo-catalytic ability for degradation of methylene blue solution under solar irradiation. Wettability results indicated that Sn and Nb dopant ions had significant effect on the hydrophilicity property of thin films.     

Comparison of optical and structural properties of nanostructure TiO2 thin film doped by Sn and Nb

The thin films of TiO₂ doped by Sn or Nb were prepared by sol–gel method under process control. The effects of Sn and Nb doping on the structural, optical and photo-catalytic properties of applied thin films have been studied by X-ray diffraction (XRD) high resolution transmission electron microscopy and UV–Vis absorption spectroscopy. Surface chemical state of thin films was examined by atomic X-ray photoelectron spectroscopy. XRD results suggest that adding impurities has a great effect on the crystallinity and particle size of TiO₂. Titania rutile phase formation in thin film was promoted by Sn⁴⁺ addition but was inhibited by Nb⁵⁺ doping. The activity of the photocatalyst was evaluated by photocatalytic degradation kinetics of aqueous methylene blue under UV and Visible radiation. The results show that the photocatalytic activity of the Sn-doped TiO₂ thin film have a larger degradation efficiency than Nb-doped TiO₂ under visible light, but under UV light photocatalytic activity of the Nb-doped TiO₂ thin film is better.     

Fabrication of Sol-Gel Optical Waveguide by Hot-Dip Coating Process

The TiO₂: Sb nanoscale thin films were deposited on glass substrates by the sol–gel dip-coating method. The influence of the dopant density on the structure and the phase transformation of the thin films were investigated by X-ray diffraction (XRD) and Raman spectra. From the results of XRD, the thin films were in a majority of anatase state. The results of Raman spectra indicated that the non-doped TiO₂ thin film composed of not only anatase but also brookite phase. Dopant Sb enhances the transformation of the TiO₂ from brookite to anatase phase. After doping proper amount of Sb, the thin films show more superhydrophilicity than the non-doped TiO₂ thin film as well. The crystal size of the TiO₂ : Sb is about 13.3–20 nm calculated from the XRD patterns.     

Effect of annealing temperatures and of high content of the iron ion (Fe<Superscript>3+</Superscript>)-doping on transition anatase–rutile phase of nanocrystalline TiO<Subscript>2</Subscript> thin films prepared by sol–gel spin coating

Titanium dioxide doped with iron (III) was prepared by sol–gel Spin Coating method. The phase structures, morphologies, particle size of the doped TiO₂ have been characterized by X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM) and ultraviolet–visible (UV–Vis) spectrophotometer. The XRD and Raman results show that the 10% Fe³⁺-doped TiO₂ thin films crystallize in anatase phase between 600 and 800 °C, and into the anatase–rutile phase at 1,000 °C, and further into the rutile phase when the content of Fe³⁺ increases (20%). The grain size calculated from XRD patterns shows that the crystallinity of the obtained anatase particles increased from 39.4 to 43.4 nm as the temperature of annealing increase, whereas the size of rutile crystallites increases, with increasing Fe³⁺ concentrations from 36.9 to 38.1 nm. The AFM surface morphology results confirmed that the particle size increases by increasing the annealing temperature and also with an increasing of Fe³⁺ content. The optical band gap (E _g) of the films was determined by the UV–Vis spectrophotometer. We have found that the optical band gap decreased with an increasing of annealing temperatures and also with an increasing of Fe³⁺ content.     

Surface chemistry and optical property of TiO2 thin films treated by low-pressure plasma

The low temperature RF plasma treatment was used to control the surface chemistry and optical property of TiO₂ thin films deposited by RF magnetron sputtering with a very good uniformity at 300 °C substrate heating temperature. The XRD pattern indicates the crystalline structure of the film could be associated to amorphous structure of TiO₂ in thin film. The plasma treatment of TiO₂ film can increase the proportion of Ti³⁺ in Ti2p and decrease in carbon atoms as alcohol/ether group in C1s at the surface. The optical transmittance of the film was enhanced by 50% after the plasma treatment. The surface structure and morphology remain the same for untreated and low-pressure plasma-treated films. Therefore, increase in the optical transmission could be due to change in surface chemistry and surface cleaning by plasma treatment.     

Fe-doped and Mn-doped titanium dioxide thin films

Thin films of TiO₂ doped with Fe and Mn were deposited on F-doped SnO₂-coated glass by spin coating. Dopant concentrations of 3–7 wt% (metal basis) were used. The structural, chemical, and optical characteristics of the films were investigated. Laser Raman microspectroscopy and glancing angle X-ray diffraction data showed that the films consisted of the anatase polymorph of TiO₂. X-ray photoelectron spectroscopy data indicated the presence of Fe³⁺, Mn⁴⁺, and Mn³⁺ in the doped films, as predicted by calculated thermodynamic stability diagrams, and the occurrence of atomic disorder and associated structural distortion. Ultraviolet–visible spectrophotometry data showed that the optical indirect band gap of the films decreased significantly with increasing dopant levels, from 3.36 eV (undoped) to 2.95 eV (7 wt% Fe) and 2.90 eV (7 wt% Mn). These improvements are attributed to single (Fe) or multiple (Mn) shallow electron/hole trapping sites associated with the dopant ions.     

Synthesis,structural and electrical characterization of PbS NCs in titania sol–gel films

Nanocrystals of lead sulfide were grown in TiO₂ (titania) thin films prepared by a sol-gel process. The synthetic procedure as well as the structural, optical, and electrical properties of the films are demonstrated. The structures and morphology of PbS nanocrystals were analyzed using HRTEM, SAED, AFM, HRSEM, XRD and EDAX elemental analysis technique. When the concentration of PbS in the titania matrix is 20 mol%, PbS NCs with a diameter of 2.0 nm are created. At a higher PbS concentration (> 40 mole%) in the titania matrix, PbS NCs and PbS clusters are created not only within the TiO₂ film but also on the external surface of the TiO₂ film. By increasing the PbS concentration up to 50 mol%, PbS nanocrystals of 6–8 nm in diameter are formed within the titania film and PbS clusters with a base size of about 100 nm² and a height up to about 20 nm were self assembled on the external surface of TiO₂ film. Quantum size effect and band gap energies were obtained from shifts of the absorption edge. For electrical measurements, PbS–TiO₂ films were deposited on an ITO/glass substrate, and then covered with gold contact. The electrical properties of ITO/PbS NCs–TiO₂/Au and ITO/PbS NCs–TiO₂/PbS cluster/Au structures were studied. I–V characteristics of the one layer structure are nearly linear and symmetric, while those of the two-layer structure exhibit rectifying behavior.     

Effects of In, Al and Sn dopants on the structural and optical properties of ZnO thin films

Effect of In, Al and Sn dopants on the optical and structural properties of ZnO thin films have been investigated by X-ray diffraction technique and optical characterization method. X-ray diffraction patterns confirm that the films have polycrystalline nature. The thin films have (002) as the preferred orientation. This (002) preferred orientation is due to the minimal surface energy which the hexagonal structure, c-plane to the ZnO crystallites, corresponds to the densest packed plane. The grain size values of the films are found to be 29.0, 35.2 and 39.5 nm for In, Al and Sn doped ZnO thin films, respectively. The optical band gaps of the films were calculated. The absorption edge shifts to the lower wavelengths with In, Al and Sn dopants. The inclusion of dopant into films expands also width of localized states as E(UIn)>E(UAl)>E(USn). The refractive index dispersion curves obey the single oscillator model. The dispersion parameters and optical constants of the films were determined. These parameters changed with In, Al and Sn dopants.     

Synthesis and characterization of novel InVO<Subscript>4</Subscript>–TiO<Subscript>2</Subscript> thin films using the low temperature sol

The InVO₄ sol was obtained by a mild hydrothermal treatment (the precursor precipitation solution at 423 K, for 4 h). Novel visible-light activated photocatalytic InVO₄–TiO₂ thin films were synthesized through a sol–gel dipping method from the composite sol, which was obtained by mixing the low temperature InVO₄ sol and TiO₂ sol. The photocatalytic activities of the new InVO₄–TiO₂ thin films under visible light irradiation were investigated by the photocatalytic discoloration of methyl orange aqueous solution. The thin films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and UV–Vis absorption spectroscopy (UV–Vis). The results revealed that the InVO₄ doped thin films enhanced the methyl orange degradation rate under visible light irradiation, 3.0 wt% InVO₄–TiO₂ thin films reaching 80.1% after irradiated for 15 h.     

Structure and properties of polymer modified TiO2 pillared montmorillonite

With the aim of improving the microstructures and properties of TiO₂ pillared montmorillonite (MMT), a long-chain polymer (polyoxypropylenediamine, PPO-D 2000) was used as a template to synthesize composite pillared MMT. The materials were characterized by X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectrophotometer, Fourier Raman (FT-Raman) spectrophotometer, thermo-gravimeter/differential thermogravimeter (TG/DSC), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) methods. The results show that as compared to low-molecular weight surfactant, this polymer significantly expanded the interlayer spacing and thus more TiO₂ could be intercalated into MMT. The specific surface area of polymer/TiO₂ pillared MMT was increased by 13% with comparison to TiO₂ pillared MMT and rose to 241.52 m²/g. Both the pore diameter and volume are doubled, and thus the pore structure is optimized markedly. The investigation on the photo-catalytic degradation of methyl orange in aqueous solution show that the modulation of polymer molecules raise the adsorption content of montmorillonite and improve the photo-catalytic activity. Therefore, this process provides a novel alternative to design and prepare the advanced eco-catalytic materials with high adsorption capacity and photo-catalytic activity. __________ Translated from Huaxue Tongbao, 2007, 12: 936–941 [译自: 化学通报]     

Photocatalytic reduction of nitrate over TiO2 and Ag-modified TiO2

This research work presents the efficiency of the TiO₂ and Ag–TiO₂ thin films prepared by the sol–gel method and coated onto the surface of 304 stainless steel sheets used in the photocatalytic nitrate reduction processes. The Ag–TiO₂ thin films had the weight by weight (w/w) ratio of Ag⁺/TiO₂ of 0.1% as Ag atom. The XRD results showed that the crystalline phase structure of TiO₂ on the Ag–TiO₂ thin films was anatase. The optical band gaps of the TiO₂ and 0.1% Ag–TiO₂ thin films were respectively 3.27 and 2.70 eV, while the surface of the prepared catalysts was hydrophobic with the respective average water contact angles of 94.8° and 118.5° for the TiO₂ and 0.1% Ag–TiO₂ thin films. The net efficiencies of photocatalytic nitrate reduction of TiO₂ and 0.1% Ag–TiO₂ were 41.4% and 70.0%, respectively. The loading of Ag only influenced the nitrate removal efficiency without affecting the stoichiometric ratio of formate to nitrate. The net stoichiometric ratio of formate to nitrate of all experiments was 2.8:1.0, which is close to the stoichiometric ratio of 2.5:1.0 of the nitrate reduction to nitrite and then to nitrogen gas.     

Evaluation of the structural,optical and photocatalytic properties of nitrogen-fluorine co-doped TiO<Subscript>2</Subscript> thin films

Nanostructured TiO₂ films were synthesized by a modified sol–gel method using Pluronics P-123 (EO₂₀PO₇₀EO₂₀) as templating agent, titanium n-butoxide [Ti(OC₄H₉)₄] as inorganic precursor, and ammonium fluoride (NH₄F) as the source of N and F dopant atoms in order to prepare sols of x(NF) TiO₂ (x=2, 5, 10, 20 wt%). The thin film preparation was made by spin coating, followed by calcination at 400 °C. The as-prepared TiO₂ and xNF-TiO₂ films were characterized by XRD, Raman spectroscopy, FTIR, TGA-DTA, SEM, UV–Vis diffuse reflectance spectroscopy and EPR. XRD and Raman spectroscopy show that the crystalline structure of these samples consists exclusively of the anatase phase. The band gap (E _g ) values for the doped 10 and 20 NF-TiO₂ film systems were found to be significantly smaller than those corresponding to the rest of the other TiO₂ films. The photocatalytic properties of these films are investigated by following the degradation of methyl orange in aqueous solution under UV irradiation. The photodecomposition is mainly a direct function of the amount of NF present in the TiO₂ matrix. The 20NF-TiO₂ sample shows the highest activity of all the samples studied.     

Influence of surfactant and annealing temperature on optical properties of sol–gel derived nano-crystalline TiO2 thin films

Titanium dioxide thin films have been synthesized by sol–gel spin coating technique on glass and silicon substrates with and without surfactant polyethylene glycol (PEG). XRD and SEM results confirm the presence of nano-crystalline (anatase) phase at an annealing temperature of 300 °C. The influence of surfactant and annealing temperature on optical properties of TiO₂ thin films has been studied. Optical constants and film thickness were estimated by Swanepoel's (envelope) method and by ellipsometric measurements in the visible spectral range. The optical transmittance and reflectance were found to decrease with an increase in PEG percentage. Refractive index of the films decreased and film thickness increased with the increase in percentage of surfactant. The refractive index of the un-doped TiO₂ films was estimated at different annealing temperatures and it has increased with the increasing annealing temperature. The optical band gap of pure TiO₂ films was estimated by Tauc's method at different annealing temperature.     

Fabrication of Ordered TiO2 Porous Thin Films by Sol-Dipping PS Template Method

Monolayer polystyrene spheres (∼400 nm) array templates were assembled orderly on clean glass substrates by dip-drawing method from emulsion of PS and porous TiO₂ thin films were prepared by using sol-dipping template method to fill TiO₂ sol into the interstices among the close-packed PS templates and then annealing to remove the PS templates. The effects of TiO₂ precursor sol concentration and dipping time in sol on the porous structure of the thin films were studied. The results showed pore size of the ordered TiO₂ porous thin film depended mainly on PS size and partly on TiO₂ sol concentration. The shrinkage of pore diameter was about 10% for 0.2 M and 20% for 0.4 M TiO₂ sol concentrations. X-ray diffraction (XRD) spectra indicated the porous thin film was anatase structure. The transmittance spectrum showed that optical transmittance of the porous thin film kept above 70% beyond the wavelength of 430 nm. Optical band-gap of the porous TiO₂ thin film (fired at 550^∘;C) was 3.12 eV.     

Cu掺杂TiO_2薄膜的摩擦学性能

采用溶胶-凝胶法在普通玻璃基底上制备了纯TiO2和Cu掺杂的TiO2(Cu-TiO2)纳米结构薄膜,利用X射线光电子能谱(XPS)、原子力显微镜(AFM)、粉末X射线衍射(XRD)及UMT-3摩擦磨损试验机考察了Cu掺杂量对薄膜组成、结构、表面形貌及摩擦学性能的影响.结果表明,相比于纯TiO2薄膜,Cu掺杂TiO2纳米薄膜平整、均匀,具有较好的耐磨减摩性能.Cu掺杂量的多少直接影响Cu-TiO2薄膜的减摩抗磨性能,当Cu掺杂量为5%(摩尔分数)时,Cu-TiO2膜具有最佳的耐磨寿命和最低的摩擦系数.     

Preparation and characterization of In<Subscript>2</Subscript>S<Subscript>3</Subscript> semiconductor thin films using the sol–gel method

This study describes the In₂S₃ semiconductor thin film coating on glass substrate by sol–gel method. The In₂S₃ thin film samples were prepared and examined by the X-ray diffraction (XRD), the UV–visible optical absorption and transmission study, and the Scanning Electron Microscope (SEM) image analyses. The XRD analysis results show that the In₂S₃ semiconductor thin films prepared by sol–gel method is formed at T~360–520 °C temperature interval. Band gap energy and optical absorption spectrum analysis of the In₂S₃ thin films reveal that Eg~2.51 eV for the In₂S₃ thin films. According to the EDX result the film was In-rich with the In/S = 1.42 ratio. The thickness of prepared In₂S₃ layer is about 400 nm.     

The influence of various deposition techniques on the photoelectrochemical properties of the titanium dioxide thin film

Thin sol–gel TiO₂ layers deposited on the conductive ITO glass by means of three various deposition techniques (dip-coating, inkjet printing and spray-coating) were used as photoanode in the three-compartment electrochemical cell. The thin TiO₂ films were treated at 450 °C and after calcination all samples possessed the crystallographic form of anatase. The relationship between surface structure and photo-induced conductivity of the nanostructured layers was investigated. It was found that the used deposition method significantly influenced the structural properties of prepared layers; mainly, the formation of defects and their quantity in the prepared films. The surface properties of the calcined layers were determined by XRD, Raman spectroscopy, SEM, AFM, UV–Vis analyses and by the optical microscopy. The photo-induced properties of nanoparticulate TiO₂/ITO photoanode were studied by electrochemical measurements combined with UV irradiation.     

掺杂钒和硅对TiO2薄膜超亲水性的影响

0引言 TiO2薄膜是众多氧化物半导体薄膜中研究最为广泛的一种材料．其表面的超亲水性和表面自清洁效应开辟了光催化薄膜功能材料的新的研究领域，已成为众多研究者研究的对象。但是如果薄膜仅由TiO2组成，当光照停止，水在TiO2薄膜表面的润湿角逐渐升高．并恢复原始状态。TiO2的禁带较宽，普通光线如太阳光等都不能将其激发．限制了其实际应用。因此如何使TiO2材料的光谱响应范围由紫外光反扩展到可见．光区一日如何更长时间地保持薄膜良好的亲水性是目前研究的重点。     

Photocatalytic Activity and Characterization of the Sol-Gel Derived Pb-Doped TiO2 Thin Films

Photocatalytically active Pb-doped TiO₂ thin films were prepared on a soda-lime glass substrate by sol-gel dip-coating technique using TiO₂ sols containing lead(II) nitrate. The thin films were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), UV-VIS spectroscopy and X-ray diffraction (XRD). A shift of the UV-VIS absorption towards longer wavelengths was observed, which indicated a decrease in the band-gap of TiO₂ upon Pb doping. XRD results showed both pure and Pb-doped TiO₂ thin films were polycrystalline, anatase type, and oriented predominantly to the (101) plane. A slight shift in the d-spacing for the Pb-doped film indicated the incorporation of Pb into the TiO₂ lattice to form Pb _x Ti_1–x O₂ solid solution. AFM results showed Pb-doped TiO₂ thin films were composed of larger TiO₂ particles and had rougher surface, compared with un-doped TiO₂ thin films. XPS results showed that except for the enrichment of Pb near the surface, Pb exists in the forms of Pb _x Ti_1–x O₂ and PbO. Dimethyl-2,2-dichlorovinyl phosphate (DDVP) was efficiently degraded in the presence of the Pb-doped TiO₂ thin films by exposing the insecticide solution to sunlight. The mechanism of photocatalytic activity enhancement of the Pb-doped TiO₂ thin films was discussed.