An efficient palladium catalytic system for microwave assisted cyanation of aryl halides

Application of a new catalytic system for cyanation reaction of various aryl halides using K₄[Fe(CN)₆] as cyanating source was examined. The reactions were performed under microwave irradiation and results showed that application of this catalytic system and DMF at 130 °C minimized the reaction times from hours to minutes in good to excellent yields.     

Microwave-enhanced synthesis of aryl nitriles using dimeric orthopalladated complex of tribenzylamine and K4[Fe(CN)6]

The activity of palladacycle [Pd{C₆H₄(CH₂N(CH₂Ph)₂)} (μ-Br)]₂ complex was investigated in the synthesis of benzonitriles under both conventional and microwave irradiation conditions and their results were compared together. This complex is an efficient, stable, and non-sensitive to air and moisture catalyst for the cyanation reaction. The substituted benzonitriles were produced of various aryl halides in excellent yields and short reaction times using a catalytic amount of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)} (μ-Br)]₂ complex and K₄[Fe(CN)₆] in DMF at 130 °C. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times.     

Palladium‐catalyzed cyanation reaction of aryl halides using K4[Fe(CN)6] as non‐toxic source of cyanide under microwave irradiation

An efficient method for preparation of aryl nitriles—using [Pd{C₆H₂(CH₂CH₂ NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ complex as an efficient catalyst and K₄[Fe(CN)₆] as a green cyanide source—from aryl bromides, aryl iodides and aryl chlorides under microwave irradiation has been reported. This complex has been demonstrated to be an active and efficient catalyst for this reaction. Using a catalytic amount of this synthesized palladium complex in DMF at 130 °C led to production of the cyanoarenes in excellent yields in short reaction times. Copyright © 2010 John Wiley & Sons, Ltd.     

Ligand-free CuI-catalyzed cyanation of aryl halides using K4[Fe(CN)6] as cyanide source and water as solvent

A methodology for the cyanation of aryl iodides is reported using copper iodide as the catalyst, K₄[Fe(CN)₆] as the cyanide source, and small quantities of water and tetraethylene glycol as the solvent. Reactions are complete within 30 min of microwave heating at 175 °C. A simple work-up procedure has also been devised.     

CN-Dimeric ortho-palladated complex catalyzed cyanation of aryl halides under microwave irradiation

The catalytic activity of dimeric [Pd{C₆H₂(CH₂CH₂NH₂)–(OMe)₂,2,3}(m-Br)]₂ complex was investigated in the synthesis of benzonitriles under microwave irradiation conditions. The substituted benzonitriles were produced from various aryl halides in excellent yields and short reaction times using a catalytic amount of this complex as efficient, stable and air- and moisture-tolerant catalyst, and K₄[Fe(CN)₆] as a green cyanide source in DMF at 130 °C.     

Efficient cyanation of aryl bromides with K4[Fe(CN)6] catalyzed by a palladium-indolylphosphine complex

This study describes a general palladium-catalyzed cyanation of aryl bromides using K₄[Fe(CN)₆] as the cyanide surrogate. The reactions can be successfully conducted under mild reaction conditions (at 50 °C) in mixed solvents (water/MeCN = 1:1) without any surfactant additives, and afford the desired aryl nitriles in good-to-excellent yields. Particularly noteworthy is that this system allows the mildest reaction temperature reported so far for palladium-catalyzed cyanation of aryl bromides with K₄[Fe(CN)₆] source in general. Common functional groups, including keto, aldehyde, free amine, and heterocyclic substrates are compatible under this system. Interestingly, the phosphine ligands bearing -PCy₂ moiety, which usually show excellent activity in aryl halide couplings, are found less effective than the corresponding ligands with -PPh₂ group.     

Palladium-catalyzed cyanation of aryl halides using K4[Fe(CN)6] as cyanide source, water as solvent, and microwave heating

A methodology for the cyanation of aryl iodides and activated aryl bromides is reported using water as the solvent and K₄[Fe(CN)₆] as the cyanide source. Reactions are complete within 20 min.     

Constant current anodic stripping chronopotentiometric determination of uranium in uranium mineral ores via accumulation of K<Subscript>2</Subscript>UO<Subscript>2</Subscript>[Fe(CN)<Subscript>6</Subscript>] on the palladium plated aluminum electrode

In the present work the uranyl hexacyanoferrate (K₂UO₂[Fe(CN)₆]) is deposited on the palladized aluminum (Pd-Al) electrode from a \textUO₂^{2 +} + \textFe( \textCN )₆ ^{- 3} {\text{UO}}_{2}^{2 + } + {\text{Fe}}\left( {\text{CN}} \right)_{6}^{ - 3} solution. Then the anodic stripping chronopotentiometry (ASCP) was used to strip the K₂UO₂[Fe(CN)₆] from the Pd-Al surface. The operational conditions including: pH, K₃Fe(CN)₆ concentration, deposition potential, deposition time and stripping current were optimized. The ASCP calibration graph was linear in concentration range 10–460 μM. of \textUO₂^{2 +} {\text{UO}}_{2}^{2 + } and the detection limit was 8.5 μM. The interference of some concomitant ions during the deposition process of K₂UO₂[Fe(CN)₆] was studied. The proposed method was successfully applied for analysis of some uranium mineral ores.     

Synthesis of Aromatic Nitriles Using Nonmetallic Cyano‐Group Sources

Aromatic nitriles are prepared efficiently through transition‐metal‐mediated cyanation of aryl (pseudo)halides with metallic cyano‐group sources, such as CuCN, KCN, NaCN, Zn(CN)₂, TMSCN, or K₄[Fe(CN)₆]. However, this approach often suffers from drawbacks, such as the formation of stoichiometric amounts of metal waste, the poisoning of the metal catalysts, or the generation of toxic HCN gas. As a result, a range of “nonmetallic” organic cyano‐group sources have been explored for the cyanation of aryl halides and arene C? H bonds. This Minireview summarizes types of nonmetallic cyano‐group sources and their applications in the preparation of aryl nitriles.     

硅胶功能化的N-丙哌嗪固载钯纳米粒子作为有效的多相催化剂用于氰化反应(英文)

An efficient heterogeneous Pd catalytic system has been developed, based on immobilization of Pd nanoparticles (PNPs) on a silica-bonded N-propylpiperazine (SBNPP) substrate. The SBNPP substrate effectively stabilizes the PNPs and improves their stability against aggregation. The catalytic activity of this catalyst was investigated in the cyanation of aryl halides with K4[Fe(CN)6 ] as the cyanide source. The catalyst could be recycled several times without appreciable loss of catalytic activity.     

Efficient cyanation of aryl halide with K4[Fe(CN)6]⋅3H2O catalyzed by a P–O bidentate chelate palladium complex under air

Cyanation of aryl halide with K₄[Fe(CN)₆]?3H₂O has been carried out in the presence of a high‐activity catalyst: an air‐stable P–O bidentate chelate palladium complex. This method is applicable to both activated and deactivated aryl halides, and even a variety of aromatic nitriles are obtained in good yields under aerobic conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

A facile microwave-assisted palladium-catalyzed cyanation of aryl chlorides

We report an efficient method for the preparation of aryl nitriles from aryl chlorides under either microwave assisted or thermal conditions. A catalyst system comprising tris(dibenzylidene acetone)dipalladium (Pd₂(dba)₃) and 2-(2′,6′-dimethoxybiphenyl)dicyclohexylphosphine (S-Phos) is shown to effectively promote cyanation of various aryl chlorides with Zn(CN)₂ as the cyanide source.     

Ag/Cu-mediated decarboxylative cyanation of aryl carboxylic acids with K4Fe(CN)6 under aerobic conditions

A method for facile synthesis of aryl nitriles has been well established via Ag/Cu-mediated decarboxylative cyanation of benzoic acids with K₄Fe(CN)₆ under aerobic conditions. The approach of using readily accessible aryl carboxylic acids and green K₄Fe(CN)₆ as starting material provides a feasible alternative to previous cyanation protocols. Control experiments revealed the key role of Cu for the process and excluded the possibility of a radical mechanism for the transformation.     

Accelerated Heck reaction using ortho‐palladated complex with controlled microwave heating

Palladium‐catalyzed Heck couplings utilizing [Pd{C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ palladacycle catalyst and microwave irradiation lead to formation of different coupling products. This complex is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even less reactive chlorides. The cross‐coupled products were produced in excellent yields. The reaction time was reduced from hours to minutes and full conversion was achieved under microwave irradiation. Copyright © 2009 John Wiley & Sons, Ltd.     

Copper-catalyzed cyanation of benzyl chlorides with non-toxic K4[Fe(CN)6]

Copper-based catalysts were firstly introduced into the cyanation of benzyl chlorides with non-toxic K₄[Fe(CN)₆]. The presented method avoids the use of extremely poisonous alkali cyanides and precious palladium catalysts. No other reagent apart from CuI, K₄[Fe(CN)₆] and toluene was used in the cyanation, showing that the presented protocol is simple and practical. A series of benzyl chlorides were smoothly cyanated in up to 85% yield under the optimal conditions.     

An efficient Stille cross‐coupling reaction catalyzed by ortho‐palladated complex of tribenzylamine under microwave irradiation

The catalytic activity of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)}(μ‐Br)]₂ complex as an efficient, stable and catalyst that is non‐sensitive to air and moisture was investigated in the Stille cross‐coupling reaction of various aryl halides with phenyltributyltins under microwave irradiation. The substituted biaryls were produced in excellent yield in short reaction times using a catalytic amount of this complex in DMF at 100 C. The combination of dimeric complex as homogeneous catalyst and microwave irradiation and also DMF as microwave‐active polar solvent gave higher yields in shorter reaction times. Copyright © 2011 John Wiley & Sons, Ltd.     

Pd-catalyzed cyanation of benzyl chlorides with nontoxic K4[Fe(CN)6]

Non-toxic K₄[Fe(CN)₆] was demonstrated to be effective as a green cyanating agent for the cyanation of alkyl halides using PPh₃/Pd(OAc)₂ as a catalyst system. The presented method allowed a series of benzyl chlorides to be smoothly cyanated in up to 88% yield. In order to avoid or suppress the deactivation of the catalyst, the reaction was required to be performed in a stringent inert ambiance.     

Cyanation of Aryl Bromides with K4[Fe(CN)6] Catalyzed by Dichloro[bis{1‐(dicyclohexylphosphanyl)piperidine}]palladium,a Molecular Source of Nanoparticles,and the Reactions Involved in the Catalyst‐Deactivation Processes

Dichloro[bis{1‐(dicyclohexylphosphanyl)piperidine}]palladium [(P{(NC₅H₁₀)(C₆H₁₁)₂})₂PdCl₂] ( 1 ) is a highly active and generally applicable C? C cross‐coupling catalyst. Apart from its high catalytic activity in Suzuki, Heck, and Negishi reactions, compound 1 also efficiently converted various electronically activated, nonactivated, and deactivated aryl bromides, which may contain fluoride atoms, trifluoromethane groups, nitriles, acetals, ketones, aldehydes, ethers, esters, amides, as well as heterocyclic aryl bromides, such as pyridines and their derivatives, or thiophenes into their respective aromatic nitriles with K₄[Fe(CN)₆] as a cyanating agent within 24 h in NMP at 140 °C in the presence of only 0.05 mol % catalyst. Catalyst‐deactivation processes showed that excess cyanide efficiently affected the molecular mechanisms as well as inhibited the catalysis when nanoparticles were involved, owing to the formation of inactive cyanide complexes, such as [Pd(CN)₄]^2?, [(CN)₃Pd(H)]^2?, and [(CN)₃Pd(Ar)]^2?. Thus, the choice of cyanating agent is crucial for the success of the reaction because there is a sharp balance between the rate of cyanide production, efficient product formation, and catalyst poisoning. For example, whereas no product formation was obtained when cyanation reactions were examined with Zn(CN)₂ as the cyanating agent, aromatic nitriles were smoothly formed when hexacyanoferrate(II) was used instead. The reason for this striking difference in reactivity was due to the higher stability of hexacyanoferrate(II), which led to a lower rate of cyanide production, and hence, prevented catalyst‐deactivation processes. This pathway was confirmed by the colorimetric detection of cyanides: whereas the conversion of β‐solvato‐α‐cyanocobyrinic acid heptamethyl ester into dicyanocobyrinic acid heptamethyl ester indicated that the cyanide production of Zn(CN)₂ proceeded at 25 °C in NMP, reaction temperatures of >100 °C were required for cyanide production with K₄[Fe(CN)₆]. Mechanistic investigations demonstrate that palladium nanoparticles were the catalytically active form of compound 1 .     

Heck coupling reaction using monomeric ortho‐palladated complex of 4‐methoxy‐ benzoylmethylenetriphenylphosphorane under microwave irradiation

The activity of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenyl‐ phosphoraneylide), was investigated in the Heck–Mizoroki C? C cross‐coupling reaction under conventional heating and microwave irradiation conditions. The complex is an active and efficient catalyst for the Heck reaction of aryl halides. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N‐methyl‐2‐pyrrolidinone (NMP) at 130 °C and 600 W. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Design of a palladium nanocatalyst produced from Schiff base modified dialdehyde cellulose and its application in aryl halide cyanation and reduction of nitroarenes

In this paper, a versatile heterogeneous catalyst system (Pd-DAC-Sch) based on stabilization of palladium nanoparticles on dialdehyde cellulose Schiff base (DAC-Sch) was developed and characterized thoroughly by a variety of spectroscopic (FT-IR, XRD, ¹³C CPMAS, and TG) and microscopic (SEM/EDS and TEM) methods. Then the prepared Pd-DAC-Sch system was evaluated as a heterogeneous nanocatalyst for aryl halide cyanation in the presence of K₄[Fe(CN)₆] and for reduction of nitroarenes to amines using NaBH₄ in water at room temperature. Pd-DAC-Sch nanocatalyst efficiently cyanated various aryl halides by providing satisfactory reaction yields of 87–98%. Moreover, Pd-DAC-Sch catalyzed 4-nitrophenole (4-NA), 2-nitroaniline (2-NA), and 4-nitroaniline (4-NA) reductions in short reaction time. More importantly, Pd-DAC-Sch nanocatalyst was reapplied up to six successive runs by giving a yield of 86% without any important changes in its morphology and structure. This paper shows that Pd-DAC-Sch is a highly effective, reusable, chemically stable, and therefore a useful nanocatalyst.