Luminescence of CaGa<Subscript>2</Subscript>Se<Subscript>4</Subscript>:Eu crystals

We have studied photoluminescence and thermoluminescence (PL and TL) in CaGa₂Se₄:Eu crystals in the temperature range 77–400 K. We have established that broadband photoluminescence with maximum at 571 nm is due to intracenter transitions 4f⁶ 5d–4f⁷ (⁸S_7/2) of the Eu²⁺ ions. From the temperature dependence of the intensity (log I–10³/T), we determined the activation energy (E _a = 0.04 eV) for thermal quenching of photoluminescence. From the thermoluminescence spectra, we determined the trap depths: 0.31, 0.44, 0.53, 0.59 eV. The lifetime of the excited state 4f6 5d of the Eu²⁺ ions in the CaGa₂Se₄ crystal found from the luminescence decay kinetics is 3.8 μsec. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 1, pp. 112–116, January–February, 2009.     

A novel approach to employ Li<Subscript>2</Subscript>MnSiO<Subscript>4</Subscript> as anode active material for lithium batteries

In the present paper, we describe utilization of cathode active material as anode active material, for example, Li₂MnSiO₄. The lithium manganese silicate has been successfully synthesized by solid-state reaction method. The X-ray diffraction pattern confirms the orthorhombic structure with Pmn2 ₁ space group. The Li/Li₂MnSiO₄ cell delivered the initial discharge capacity of 420 mA h g⁻¹, which is 110 mA h g⁻¹ higher than graphitic anodes. The electrochemical reversibility and solid electrolyte interface formation of the Li₂MnSiO₄ electrode was emphasized by cyclic voltammetry.     

Impedance spectroscopy study of Pb<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript> compound

The lead pyrophosphate, Pb₂P₂O₇, compound was prepared by conventional solid-state reaction and identified by X-ray powder diffractometer. Pb₂P₂O₇ has a triclinic structure whose electrical properties were studied using impedance spectroscopy technique. Both impedance and modulus analysis exhibit the grain and grain boundary contribution to the electrical response of the sample. The temperature dependence of the bulk and grain boundary conductivity were found to obey the Arrhenius law with activation energies E _g = 0.66 eV and E _gb = 0.67 eV, respectively. The scaling behavior of the imaginary part of the complex impedance suggests that the relaxation describes the same mechanism at various temperatures.     

Influence of carbon additive on the properties of spherical Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> and LiFePO<Subscript>4</Subscript> materials for lithium-ion batteries

Preparing spherical particles with carbon additive is considered as one effective way to improve both high rate performance and tap density of Li₄Ti₅O₁₂ and LiFePO₄ materials. Spherical Li₄Ti₅O₁₂/C and LiFePO₄/C composites are prepared by spray-drying–solid-state reaction method and controlled crystallization–carbothermal reduction method, respectively. The X-ray diffraction characterization, scanning electron microscope, Brunauer–Emmett–Teller, alternating current impedance analyzing, tap density testing, and electrochemical property measurements are investigated. After hybridizing carbon with a proper quantity, the crystal grain size of active materials is remarkably decreased and the electrochemical properties are obviously improved. The Li₄Ti₅O₁₂/C and LiFePO₄/C composites prepared in this work are spherical. The tap density and the specific surface area are as high as 1.71 g cm⁻³ and 8.26 m² g⁻¹ for spherical Li₄Ti₅O₁₂/C, which are 1.35 g cm⁻³ and 18.86 m² g⁻¹ for spherical LiFePO₄/C powders. Between 1.0 and 3.0 V versus Li, the reversible specific capacity of the Li₄Ti₅O₁₂/C is more than 150 mAh g⁻¹ at 1.0-C rate. Between 2.5 and 4.2 V versus Li, the reversible capacity of the LiFePO₄/C is close to 140 mAh g⁻¹ at 1.0-C rate.     

Electrical characterization of the [N(CH<Subscript>3</Subscript>)<Subscript>4</Subscript>][N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]ZnCl<Subscript>4</Subscript> compound

The [N(CH₃)₄][N(C₂H₅)₄]ZnCl₄ compound has been synthesized by a solution-based chemical method. The X-ray diffraction study at room temperature revealed an orthorhombic system with P2₁2₁2 space group. The complex impedance has been investigated in the temperature and frequency ranges 420–520 K and 200 Hz–5 MHz, respectively. The grain interior and grain boundary contribution to the electrical response in the material have been identified. Dielectric data were analyzed using the complex electrical modulus M ^* for the sample at various temperature. The modulus plots can be characterized by full width at half height or in terms of a non-exponential decay function ϕ(t) = exp[(−t/τ) ^β ]. The detailed conductivity study indicated that the electrical conduction in the material is a thermally activated process. The variation of the AC conductivity with frequency at different temperatures obeys the Almond and West universal law.     

Synthesis and characterization of electron beam evaporated LiCoO<Subscript>2</Subscript> thin films

LiCoO₂ thin films were prepared by electron beam evaporation technique using LiCoO₂ target with Li/Co ratio 1.1 in an oxygen partial pressure of 5 × 10⁻⁴ mbar. The films prepared at substrate temperature T _s < 573 K were amorphous in nature, and the films prepared at T _s > 573 K exhibited well defined (104), (101), and (003) peaks among which the (104) orientation predominates. The X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma (ICP) data revealed that the films prepared in the substrate temperature range 673–773 K are nearly stoichiometric. The grain size increases with an increase of substrate temperature. The Co–e_g absorption bands, are empty and their peak position lies at around 1.7 eV above the top to the Co–t_2g bands. The fundamental absorption edge was observed at 2.32 eV. The films annealed at 1,023 K in a controlled oxygen environment exhibit (104) out plane texture with large grains. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.     

Structural and electrical properties of pure and H<Subscript>2</Subscript>SO<Subscript>4</Subscript> doped (PVA)<Subscript>0.7</Subscript>(NaI)<Subscript>0.3</Subscript> solid polymer electrolyte

Solid polymer electrolytes (SPE) based on poly-(vinyl alcohol) (PVA)_0.7 and sodium iodide (NaI)_0.3 complexed with sulfuric acid (SA) at different concentrations were prepared using solution casting technique. The structural properties of these electrolyte films were examined by X-ray diffraction (XRD) studies. The XRD data revealed that sulfuric acid disrupt the semi-crystalline nature of (PVA)_0.7(NaI)_0.3 and convert it into an amorphous phase. The proton conductivity and impedance of the electrolyte were studied with changing sulfuric acid concentration from 0 to 5.1 mol/liter (M). The highest conductivity of (PVA)_0.7(NaI)_0.3 matrix at room temperature was 10⁻⁵ S cm⁻¹ and this increased to 10⁻³ S cm⁻¹ with doping by 5.1 M sulfuric acid. The electrical conductivity (σ) and dielectric permittivity (ε′) of the solid polymer electrolyte in frequency range (500 Hz–1 MHz) and temperature range (300–400) K were carried out. The electrolyte with the highest electrical conductivity was used in the fabrication of a sodium battery with the configuration Na/SPE/MnO₂. The fabricated cells give open circuit voltage of 3.34 V and have an internal resistance of 4.5 kΩ.     

Photoluminescence of fluoroacrylate polymers impregnated with Eu(bta)<Subscript>3</Subscript> using supercritical CO<Subscript>2</Subscript>

Optical properties (photoluminescence and absorption) of Eu(bta)₃(B) _n (B = H₂O or 1,10-phenanthroline) polycrystalline powders and fluoroacrylate polymers (FAPs) impregnated with these compounds using supercritical CO₂ (SC CO₂) were investigated. It was established that impregnation of Eu(bta)₃phen into the FAPs using an SC CO₂ solution was difficult to achieve. The type of B (ancillary ligand) and the polymer matrix were shown to influence the temperature quenching of photoluminescence of Eu³⁺ ions in the range 25–100°C. A comparative analysis of quantum yields (λ_ex = 300 and 380 nm) and photoluminescence decay times (λ_ex = 337.1 nm) for Eu(bta)₃B _n and for Eu(bta)₃B _n -doped FAPs was performed.     

Fluorescent Carbon Dots Capped with PEG<Subscript>200</Subscript> and Mercaptosuccinic Acid

The synthesis and functionalization of carbon nanoparticles with PEG₂₀₀ and mercaptosuccinic acid, rendering fluorescent carbon dots, is described. Fluorescent carbon dots (maximum excitation and emission at 320 and 430 nm, respectively) with average dimension 267 nm were obtained. The lifetime decay of the functionalized carbon dots is complex and a three component decay time model originated a good fit with the following lifetimes: τ ₁ = 2.71 ns; τ ₂ = 7.36 ns; τ ₃ = 0.38 ns. The fluorescence intensity of the carbon dots is affected by the solvent, pH (apparent pK _a of 7.4 ± 0.2) and iodide (Stern-Volmer constant of 78 ± 2 M⁻¹).     

Broadband infrared luminescence from transparent glass–ceramics containing Ni<Superscript>2+</Superscript>-doped <Emphasis Type="BoldItalic">β</Emphasis> -Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystals

Transparent Ni²⁺-doped β-Ga₂O₃ glass–ceramics were synthesized. The nanocrystal phase in the glass–ceramics was identified to be β-Ga₂O₃ and its size was about 3.6 nm. It was confirmed from the absorption spectra that the ligand environment of Ni²⁺ ions changed from the trigonal bi-pyramid fivefold sites in the as-cast glass to the octahedral sites in the glass–ceramics. The broadband infrared emission centering at 1270 nm with full width at half maximum (FWHM) of more than 250 nm was observed. The fluorescence lifetime was about 1.1 μs at room temperature. The observed infrared emission could be attributed to the ³ T _2g (³ F )→³ A _2g (³ F ) transition of octahedral Ni²⁺ ions. It is suggested that the Ni²⁺-doped transparent β-Ga₂O₃ glass–ceramics with broad bandwidth and long lifetime have a potential as a broadband amplification medium. PACS 42.70.-a; 42.70.Ce; 81.40.Tv     

Electrical properties,equivalent circuit,and dielectric relaxation studies on [(C<Subscript>3</Subscript>H<Subscript>7</Subscript>)<Subscript>4</Subscript>N]<Subscript>2</Subscript>Cd<Subscript>2</Subscript>Cl<Subscript>6</Subscript> polycrystalline

The Ac electrical conductivity and the dielectric relaxation properties of the [(C₃H₇)₄N]₂Cd₂Cl₆ polycrystalline sample have been investigated by means of impedance spectroscopy measurements over a wide range of frequencies and temperatures, 209 Hz–5 MHz and 361–418 K, respectively. The purpose is to make a difference between the electrical and dielectric properties of the polycrystalline sample and single crystal. Besides, a detailed analysis of the impedance spectrum suggests that the electrical properties of the material are strongly temperature-dependent. Plots of (Z" versus Z') are well fitted to an equivalent circuit model consisting of a series combination of grains and grains boundary elements. Moreover, the temperature dependence of the electrical conductivity in the different phases follows the Arrhenius law and the frequency dependence of σ (ω) follows the Jonscher’s universal dynamic law. Furthermore, the modulus plots can be characterized by full width at half height or in terms of a nonexperiential decay function φ(t) = exp(t/t)^β. Finally, the imaginary part of the permittivity constant is analyzed with the Cole–Cole formalism.     

Magnetic properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.47</Subscript>Al<Subscript>0.03</Subscript>O<Subscript>2</Subscript> as positive electrode for Li-ion batteries

The layered LiNi_0.5Mn_0.47Al_0.03O₂ was synthesized by wet chemical method and characterized by X-ray diffraction and analysis of magnetic measurements. The powders adopted the α-NaFeO₂ structure. This substitution of Al for Mn promotes the formation of Li(Ni_0.47²⁺Ni_0.03³⁺Mn_0.47⁴⁺Al_0.03³⁺)O₂ structures and induces an increase in the average oxidation state of Ni, thereby leading to the shrinkage of the lattice unit cell. The concentration of antisite defects in which Ni²⁺ occupies the (3a) Li lattice sites in the Wyckoff notation has been estimated from the ferromagnetic Ni²⁺(3a)–Mn⁴⁺(3b) pairing observed below 140 K. The substitution of 3% Al for Mn reduces the amount of antisite defects from 7% to 6.4–6.5%. The analysis of the magnetic properties in the paramagnetic phase in the framework of the Curie–Weiss law agrees well with the combination of Ni²⁺ (S = 1), Ni³⁺ (S = 1/2) and Mn⁴⁺ (S = 3/2) spin-only values. Delithiation has been made by the use of K₂S₂O₈. According to this process, known to be softer than the electrochemical one, the nickel ions in the (3b) sites are converted into Ni⁴⁺ in the high spin configuration, while Ni²⁺(3a)–Mn⁴⁺(3b) ferromagnetic pairs remain, as the Li⁺(3b) ions linked to the Ni²⁺(3a) ions in the antisite defects are not removed. The results show that the antisite defect is surrounded by Mn⁴⁺ ions, implying the nonuniform distribution of the cations in agreement with previous NMR and neutron experiments.     

Electro-optic properties of epitaxial Sr<Subscript>0.6</Subscript>Ba<Subscript>0.4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>6</Subscript> films grown on MgO substrates using Li<Subscript>x</Subscript>Ni<Subscript>2-x</Subscript>O buffer layer

Textured Li_xNi_2-xO (LNO) thin films have been fabricated on (001)MgO substrates by pulsed laser deposition technique. The as-deposited LNO films shows a conductivity of 2.5×10^-3 Ω m and possess a transmittance of about 35% in the visible region. Subsequent deposition of Sr_0.6Ba_0.4Nb₂O₆ (SBN60) thin film on these LNO-coated MgO substrates resulted in a textured SBN layer with a 〈001〉 orientation perpendicular to the substrate plane. Phi scans on the (221) plane of the SBN layer indicated that the films have two in-plane orientations with respect to the substrate. The SBN unit cells were rotated in the plane of the film by ± 8.2° as well as ± 45° with respect to the LNO/MgO substrate. Besides the highly (00l)-orientation, the SBN films also exhibited a dense microstructure as shown by scanning electron microscopy. The electro-optic coefficient (r₃₃) of the SBN film was measured to be 186 pm/V. On the basis of our results, we have demonstrated that the LNO film can be used as a buffer layer as well as a transparent bottom electrode for waveguide applications. The SBN/LNO heterostructure is also a suitable candidate for integrated electro-optics devices. PACS  42.79.Gn; 42.82.Et; 78.20.Ci     

Effect of ZnO nanoparticles filler concentration on the properties of PEO-ENR50-LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript> solid polymeric electrolyte

A solid polymer electrolyte comprising blend of poly(ethylene oxide) and 50% epoxidized natural rubber (ENR50) as a polymer host, LiCF₃SO₃ as a salt and nanoparticle ZnO as an inorganic filler was prepared by solution-casting technique. The effect of filler on the electrolyte properties was characterized and analysed. FESEM analysis showed that the filler was well distributed in the polymer matrix, while the effective interaction between the salt and the polymer host was reduced by the addition of filler. As evidenced by FTIR analysis, which showed the formation of triplet peak at C-O-C stretching region. Ionic conductivity was found to decrease from 1.4 × 10⁻⁴ Scm⁻¹ to 2.5 × 10⁻⁶ Scm⁻¹ upon the addition of filler, due to the blocking effect of filler into the electrolyte conduction pathways. The temperature dependence on the electrolyte conductivity obeys Arrhenius rule in two temperature regions.     

Charge density wave and superconductivity in 2H- and 4H-NbSe<Subscript>2</Subscript>: A revisit

Good-quality hexagonal NbSe₂ single crystals were prepared. In 2H-NbSe₂, superconducting and charge density wave (CDW) transitions were found at T _s = 7.4 K and T _c = 35 K respectively as reported previously. We have noticed that these two transitions are changed to T _c = 42 K and T _s = 6.5 K, in 4H-NbSe₂. Thermopower has shown clear anomaly at CDW transitions. The anisotropic upper critical field was calculated as ~3 and 6.3 for 2H- and 4H-single crystals around t = 0.81, where t = T/T _s, from resistivity and explained in terms of coherence length. From the relation, H_c2 (T)=H_c2 (0)[1-t²]H_{\rm c2} (T)=H_{\rm c2} (0)[1-t^2], H_c2^l (0)H_{\rm c2}^l (0) was calculated as ~8.15 T and 16.98 T at t = 0.84 in 2H-NbSe₂ and 4H-NbSe₂ respectively. However, H_c2^t (0) = 2.68H_{\rm c2}^t (0) = 2.68T for both single crystals.     

Solid polymeric electrolyte of PVC–ENR–LiClO<Subscript>4</Subscript>

The ionic conductivity of PVC–ENR–LiClO₄ (PVC, polyvinyl chloride; ENR, epoxidized natural rubber) as a function of LiClO₄ concentration, ENR concentration, temperature, and radiation dose of electron beam cross-linking has been studied. The electrolyte samples were prepared by solution casting technique. Their ionic conductivities were measured using the impedance spectroscopy technique. It was observed that the relationship between the concentration of salt, as well as temperature, and conductivity were linear. The electrolyte conductivity increases with ENR concentration. This relationship was discussed using the number of charge carrier theory. The conductivity–temperature behaviour of the electrolyte is Arrhenian. The conductivity also varies with the radiation dose of the electron beam cross-linking. The highest room temperature conductivity of the electrolyte of 8.5 × 10⁻⁷ S/cm was obtained at 30% by weight of LiClO₄. The activation energy, E _a and pre-exponential factor, σ _o, are 1.4 × 10⁻² eV and 1.5 × 10⁻¹¹ S/cm, respectively.     

Effects of the interaction between R and Fe modes of the magnetic resonance in RFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> rare-earth iron borates

Resonance modes that are due to magnetic excitations in the exchange-coupled subsystems of rare-earth ions (R = Nd³⁺, Sm³⁺, and Gd³⁺) and Fe³⁺ ions have been detected in submillimeter transmission spectra (0.1–0.6 THz) of RFe₃(BO₃)₄ iron borate-multiferroic single crystals. The strong interaction between spin oscillations of the Fe and R subsystems has been revealed, which determines the behavior of the modes depending on the anisotropy of the exchange splitting of the ground doublet of the R ion. It has been shown that the intensities of coupled modes (contributions to the magnetic permeability) depend strongly on the difference between the g factors of Fe and R ions. This dependence makes it possible to determine the sign of the latter g factor. In particular, a noticeable intensity of exchange Nd modes in NdFe₃(BO₃)₄ is due to an increase in their contribution at g _{⊥, ‖}^Nd < 0, while in GdFe₃(BO₃)₄ with g _Gd ≈ g _Fe ≈ 2, the Fe and Gd contributions compensate each other and the exchange (Gd) mode is not observed. In spite of the weak interaction of Sm ions with the magnetic field, SmFe₃(BO₃)₄ exhibits resonance modes, which are attributed to the excitation of Sm ions through the Fe subsystem.     

Total and ionization cross-sections of N<Subscript>2</Subscript> and CO by positron impact: Theoretical investigations

In this paper we report our calculations on several important total cross-sections (TCSs) of positron impact on isoelectronic N₂ and CO molecules, treated in the complex spherical potential formalism. Basically the total (complete) cross-section Q _T consists of elastic and inelastic contributions. Our total inelastic cross-section (Q _inel) contains ionization and electronic excitations together with positronium formation. Our goal here is to bifurcate Q _inel further to deduce total ionization cross-section, using the ‘complex scattering potential–ionization contribution’ (CSP-ic) method of electron–atom/molecule scattering. The present range of positron energy is 15–2000 eV. All the resulting cross-sections are in a good general accord with the existing data. This work highlights the importance of various scattering channels in e⁺-N₂ and e⁺-CO interactions at intermediate and high energies.     

Synthesis and magnetic characterization of CoMoN<Subscript>2</Subscript> nanoparticles

A new ternary nitride, CoMoN₂, was prepared in the nanosize regime of 9.0 ± 2.0 nm, by nitridation of the precursor intermetallic nitride Co₃Mo₃N. XRD–Rietveld analysis revealed the presence of 0.60 (±0.02) mass % of Co impurity phase. The calculated space groups of CoMoN₂ and Co are P6 ₃ /mmc and Fm-3m, respectively. The N atoms lie at the interstitial sites and the 12 calculated nitrogen sites indicate the presence of a layered structure. The XPS studies indicated the presence of the nitride and surface oxynitride/oxide phases. CoMoN₂ is an interstitial nitride with Co and Mo in the zero oxidation state. The room temperature susceptibility is estimated after subtracting the ferromagnetic contribution from cobalt and found to be 2.7 × 10⁻⁴ emu g⁻¹ Oe⁻¹, indicating the Pauli-paramagnetic nature. The ferromagnetic exchange interactions between the Co atoms in CoMoN₂ are reduced due to the presence of Mo and N in the crystal lattice. The hysteresis loop shift 19 Oe is attributed to the demagnetizing dipolar fields created in the soft CoMoN₂ phase by the hard Co phase.