Magnetite nanoparticles prepared by the crystallization of Na2O–Fe2O3–B2O3–SiO2 glasses

A glass with the composition of 35Na₂O–24Fe₂O₃–20B₂O₃–20SiO₂–1ZnO (mol%) was melted, quenched, using a twin roller technique, and subsequently heat treated in the range 485–750 °C for 1–2 h. This led to the crystallization of magnetite as the sole or the major crystalline phase.Heat treatment at lower temperatures resulted in the crystallization of magnetite crystals 7–20 nm in diameter, whereas heat treatment at higher temperatures produced higher quantities of magnetite and much larger crystals. The room temperature magnetization and coercive force values were in the range of 6–57 emu g^? 1 and 0–120 Oe, respectively for the heat treated glasses.     

Luminescence and energy transfer in Dy3+/Tb3+ co-doped CaO–Al2O3–B2O3–RE2O3 glass

The new calcium aluminoborate glasses with the composition of CaO–Al₂O₃–B₂O₃–RE₂O₃ (RE = Dy and Tb) were synthesized and the luminescence of Dy³⁺ and Tb³⁺ was investigated. The results show that the emission intensity of Tb³⁺ ion was enhanced when introducing Dy³⁺ ion into CaO–Al₂O₃–B₂O₃–Tb₂O₃ glass due to the energy transfer processes between Dy³⁺ and Tb³⁺. The energy transfer efficiencies, transfer probabilities as well as donor–acceptor critical distances were also calculated. The energy transfer mechanism between Dy³⁺ and Tb³⁺ ions is electric dipole–dipole interaction, which can be concluded by both fluorescence decay and emission intensity ratio varieties.     

Characteristics and biocompatibility of Na2O–K2O–CaO–MgO–SrO–B2O3–P2O5 borophosphate glass fibers

A novel Na₂O–K₂O–CaO–MgO–SrO–B₂O₃–P₂O₅ borophosphate glass fiber is prepared. The thermal properties including differential thermal analysis (DTA) and viscosity measurement of the glass were presented. The tensile strength of the glass fiber is measured. The reaction of the glass fibers in the SBF solution is characterized by XRD, FTIR and SEM. XRD and FTIR indicate that the carbonate hydroxyapatite has formed rapidly on the glass. Cell attachment, spreading and proliferation on the glass are determined by MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay method using Human osteosarcoma MG-63 cells. The bioactivity and biocompatibility of the glass fiber make it a good potential prospect in the field of tissue engineering.     

Mixed alkali effect in physical and optical properties of Li2O–Na2O–WO3–B2O3 glasses

Glasses with composition xLi₂O-(30 ? x)Na₂O–10WO₃–60B₂O₃ (where x = 0, 5, 10, 15, 20, 25 and 30 mol%) have been prepared using the melt quenching technique. In the present work, the mixed alkali effect (MAE) has been investigated in the above glass system through density and modulated DSC studies. The density and glass transition temperature of the present gasses varies non-linearly, the exhibiting the mixed alkali effect. From the optical absorption studies, the values of direct optical band gap, indirect optical band gap energy (E_o) and Urbach energy(ΔE) have been evaluated. The values of E_o and ΔE vary non-linearly with composition parameter, showing the mixed alkali effect. The electronic polarizability of oxide ions, optical basicity and the Yamashita–Kurosawa's interaction parameter have been examined to check the correlation among them and bond character. Based on good correlation among electronic polarizability of oxide ions, optical basicity and the Yamashita–Kurosawa's interaction parameter, the present Li₂O–Na₂O–WO₃–B₂O₃ glasses were classified as normal ionic (basic) oxides.     

Formation of Co2+-doped nanocrystals in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Transparent glass-ceramics were synthesized by heat-treatment of glass with a composition of 5La₂O₃–13.2MgO–28.8Al₂O₃–46SiO₂–4.5TiO₂–2.5ZrO₂–0.15CoO (LMAS) (wt.%). The activation energy of crystallization and the Avrami parameter for the LMAS glass were determined from the DTA curves at different heating rates. The most two intense bands of Raman spectrum of initial glass at ~ 810 cm^?1 and ~ 900 cm^?1 were connected with the presence of [SiO₄] and [TiO₄] tetrahedral, respectively. After heat-treated at 700 °C/10 h+820 °C/8 h, the intensity of the band for [TiO₄] tetrahedral weakened, while an intensive band at ~ 800 cm^?1 for the Ti–O bond appeared. Other bands were characteristics of high-silicate network and x(MgTi₂O₅)·y(Al₂TiO₅) polycrystals. The changes reflected phase separation after heat-treatment of the initial glass. The strong absorption band of glass-ceramics centered at 580 nm can be assigned to ⁴A₂(⁴F)→⁴T₁(⁴P) and the broad absorption band at 1100–1700 nm to ⁴A₂(⁴F)→⁴T₁(⁴F) transitions of tetrahedral coordinated Co²⁺ ion. Two broad emission bands, one was around 660 nm, the other was from 800 nm to 1050 nm, of glass-ceramics correspond to the ⁴T₁(⁴P)→⁴A₂(⁴F) and ⁴T₁(⁴P)→⁴T₂(⁴F) transitions of tetrahedral coordinated Co²⁺ ions. The absorption and emission features clearly demonstrated that Co²⁺ ions were incorporated into nanocrystals and located in tetrahedral sites.     

Spectroscopic properties of Co2+ ions in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Co²⁺-doped La₂O₃–MgO–Al₂O₃–SiO₂ (LMAS) glass-ceramics was synthesized by conventional method. The microstructure of LMAS GCs heat-treated at 760 °C/12 h + 930 °C/4 h was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The spectroscopic properties of Co²⁺-doped LMAS GCs were studied by absorption spectrum, excitation spectrum, and temperature dependent luminescence spectra. XRD results revealed the sizes of MgAl₂O₄ crystalline phases are about 9.1 ± 1.5 nm. The three peaks in the visible absorption band of LMAS GCs at 549 nm, 585 nm and 626 nm are connected with the transitions from ⁴A₂ level to ²A₁/²T₂(²G), ⁴T₁(⁴P) and ²E/²T₁(²G) levels, respectively, and excitations into them emit the radiation at around 666 nm. The luminescence intensity increased with temperature increasing from 10 K to 150 K, while it weakened with temperature increasing from 150 K to 350 K. These features were explained by the effects of two competing mechanisms.     

Performance investigation of Li2O–Al2O3–4SiO2 based glass–ceramics with B2O3, Na3AlF6 and Na2O fluxes

Influence of single fluxes (10 wt.% B₂O₃), bi-component fluxes (4 wt.% B₂O₃ + 6 wt.% Na₃AlF₆), and complex fluxes (4 wt.% B₂O₃ + 4 wt.% Na₃AlF₆ + 2 wt.% Na₂O) on the thermal kinetic parameters, microstructure, flexural strength and coefficient of thermal expansion (CTE) of Li₂O–Al₂O₃–4SiO₂ (LAS) glass–ceramics was investigated through differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The results showed that complex fluxes could efficiently decrease transition temperature (T_g) and crystallization temperature (T_p), and accelerate the formation of needle-like β-spodumene crystals which benefit high flexural strength. The homogeneous LAS glass–ceramic (sample C₃) which has a high strength of 132.4 MPa and low CTE (100–650 °C) of 2.74 × 10^? 6/°C is obtained by doping of the initial LAS glass by complex fluxes of 4 wt.% B₂O₃, 4 wt.% Na₃AlF₆, and 2 wt.% Na₂O, nucleating at 630 °C/120 min and then crystallized at 780 °C/120 min. It is worthy of further investigation as a bonder of diamond composite material due to its outstanding prosperities.     

Bi precipitates in Na2O–B2O3 glasses

Bi particles of different sizes were produced in Na₂O–B₂O₃ glasses by melt quenching and heat treatment technique. Melting temperature of Bi particles was measured by differential scanning calorimetry and X-ray diffraction. Measured melting temperatures of Bi particles are lower than bulk Bi melting temperature. Results of transmission electron microscopy were analyzed for the dependence of melting temperature on particle radius. The pressure and surface energy effect on melting temperature is estimated. The melting behavior of Bi particles in Na₂O–B₂O₃ glasses depends on the difference in the interfacial energies between the solid particle/glass and liquid particle/glass, and liquid particle/glass, σ_sm−σ_lm, which is estimated to be 255×10⁻³ J m⁻².     

Crystallization behavior during cooling and glass-forming ability of Al2O3-poor Li2O–Al2O3–SiO2 melts

The influence of K₂O/(MgO + K₂O) on some melt properties, including crystallization during cooling of melts and glass-forming ability, was investigated in the Li₂O–Al₂O₃–SiO₂ system with low Al₂O₃ content. The dependence of viscosity on K₂O/(MgO + K₂O) above 1000 °C showed a monotonic decrease due to the reduction of [MgO₄] concentration and the conductivity also decreased due to the larger ion radius of K. The temperature dependence of conductivity for all melts showed an abrupt change at one temperature due to crystallization in which temperature of crystallization decreases with increase of K₂O. The crystallization behavior near liquidus temperature was studied quantitatively by calculating the crystal volume fraction from apparent viscosity value. The glass-forming ability of the melts was discussed by using data related with viscosity and crystallization. Finally, it was suggested that the melts with K₂O/(MgO + K₂O) ? 0.75 have a good glass-forming ability.     

BaO–B2O3–SiO2–Al2O3 sealing glass for intermediate temperature solid oxide fuel cell

Glasses in the formulation close to BaSiO₃–BaB₂O₄ eutectic compound are developed for sealing of intermediate-temperature (500–650 °C) solid oxide fuel cell (IT-SOFC). Thermal and microstructural analyses of the glasses with 0–10 mol% Al₂O₃ are also conducted. Detailed crystallization kinetics and interfacial stability of the glass in contact with yttria-stabilized zirconia (YSZ) and samaria-doped ceria (SDC) are investigated and compared. The results show that the formulation, 47BaO–21B₂O₃–27SiO₂–5Al₂O₃ (G1A5), performs the best on glass forming ability (GFA) among all tested formulations, and shows matched thermal expansion and working temperature to CeO₂-based electrolytes of IT-SOFC. Two major crystalline phases that precipitate from G1A5 above 750 °C are platy hexacelsian and BaSiO₃ grains.     

Effect of TiO2 addition on the chemical durability of Bi2O3–SiO2–ZnO–B2O3 glass system

The effect of the substitution of ZnO for TiO₂ on the chemical durability of Bi₂O₃–SiO₂–ZnO–B₂O₃ glass coatings in hot acidic medium (0.1 N H₂SO₄ at 80 °C) for different times was studied. The thick films produced by a screen-printing method and heat treated at 700 °C/5 min were analyzed by X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The glass from the Bi₂O₃–SiO₂–ZnO–B₂O₃ system developed Zn₂SiO₄ and a glassy phase that were readily attacked by hot 0.1 N sulfuric acid, whereas the heat treated coating from the Bi₂O₃–SiO₂–TiO₂–ZnO–B₂O₃ system presented a finer microstructure with thin interconnected Bi₄Ti₃O₁₂ crystals and a glassy phase more resistant to hot 0.1 N sulfuric acid attack etching.     

Nitridation of SiO2–B2O3 aerogels

SiO₂–B₂O₃ aerogels have been prepared by drying wet gels at a supercritical condition for ethanol in an autoclave. Aerogels have been nitrided for 6 h in flowing ammonia at the temperature of 1200 °C. It has been found that the amount of nitrogen incorporated in these aerogels always exceeds 20 wt%. This is a much higher value compared with the amount of nitrogen incorporated in a pure silica aerogel nitrided at the same conditions. The specific surface area of SiO₂–B₂O₃ aerogels has been between 312 and 359 m²/g. After nitridation some shrinkage of aerogels has been observed and the surface area decreases about 20%. In FTIR spectra of SiO₂–B₂O₃ aerogels a typical bands for SiO₂ are observed. After nitridation a shift and broadening of 1100 cm^?1 band to lower wavenumbers indicates that Si–N and B–N bonds are formed in nitrided aerogels.     

Thermal and electric transport properties of (60−x)V2O5–xAs2O3–20Fe2O3–10CaO–10Li2O unconventional glassy system

This paper presents the results of kinematical studies of glass transition and crystallization in the unconventional glassy system (60?x)V₂O₅–xAs₂O₃–20Fe₂O₃–10CaO–10Li₂O (x = 0, 10, 20, 30, 40 mol%) using differential scanning calorimetry (DSC). The glass transition temperatures (T_g), the onset crystallization temperatures (T_c), and the peak temperatures of crystallization (T_p) were found to be dependent on the compositions and the heating rates. From the dependence on heating rates of (T_g) and (T_p) the activation energy for glass transition (E_g) and the activation energy for crystallization (E_c) are calculated. The thermal stability of (60?x)V₂O₅–xAs₂O₃–20Fe₂O₃–10CaO–10Li₂O was evaluated in term of, criteria ΔT = T_c ? T_g. All the results confirm that the thermal stability increase with increasing As₂O₃ contents. From the electric–dielectric measurements it was found that, σ_dc, σ_ac(ω) and θ_D/2 decrease with increasing As₂O₃ contents. It is also observed that the dielectric constant (ε₁(ω)) and the loss factor (tan δ) decrease with increasing As₂O₃ contents in this glass system.     

Influence of Bi2O3 content on the crystallization behavior of TeO2–Bi2O3–ZnO glass system

Glass ceramic materials with composition 75TeO₂–xBi₂O₃–(25-x)ZnO (x = 13, 12, 11) possessing transparency in the near- and mid-infrared (MIR) regions were studied in this paper. It was found that as the Bi₂O₃ content increased in the glass composition, the observed crystallization tendency is enhanced, and high crystal concentrations were obtained for the glasses with high Bi₂O₃ content while maintaining transparency in the MIR region. Crystal size in the glass ceramic was reduced by adjusting the heat treatment conditions; the smallest average size obtained in this study is 700 nm. Bi_0.864Te_0.136O_1.568 was identified using X-ray Diffraction (XRD) and found to be the only crystal phase developed in the glass ceramics when the treatment temperature was fixed at 335 °C. The morphology of the crystals was studied using Scanning Electron Microscopy (SEM), and crystals were found to be polyhedral structures with uniform sizes and a narrow size distribution for a fixed heat treatment regime. Infrared absorption spectra of the resulting glass ceramics were studied. The glass ceramic retained transparency in the infrared region when the crystals inside were smaller than 1 μm, with an absorption coefficient less than 0.5/cm in the infrared region from 1.25 to 2.5 μm. The mechanical properties were also improved after crystallization; the Vickers Hardness value of the glass ceramic increased by 10% relative to the base glass.     

Structural role and coordination environment of Fe in Fe2O3–PbO–SiO2–Na2O composite glasses

The structural role, coordination geometry and valence of Fe in a series of Fe₂O₃–PbO–SiO₂–Na₂O glasses are studied by means of Fe-K-NEXAFS and EXAFS spectroscopies. Parameters for the study are the concentration of the Fe and Pb-oxides, the SiO₂/Na₂O ratio and the cast temperature. The EXAFS and NEXAFS results reveal that the role of Fe³⁺ depends on the concentration of Fe₂O₃. More specifically, in most of the studied quaternary systems, the Fe³⁺ ion is a glass former, i.e. the Fe atoms belong to FeO₄ tetrahedra that participate in the formation of the glassy network. The role of Fe as an intermediate oxide is identified only in one sample with 20 wt% Fe₂O₃, where ～80 at.% of the Fe atoms are tetrahedrally coordinated with O atoms, while the remaining ～20 at.% of the Fe atoms occupy octahedral sites. It is also revealed that the tetrahedral coordination of Fe in the vitreous matrix is destroyed when a number of parameters is altered, such as the T_cast, the (Fe + Si)/O and the SiO₂/Na₂O ratio.     

Spectral investigations on VO2+ ion doped in CaO–SrO–Na2O–B2O3 glass systems

Glasses of the (20 ? x)CaO–xSrO–(20 ? y)Na₂O–60B₂O₃ ? y (CSNB) system with (5 ≤ x ≤ 15) mol% and y = 0.1 mol% of V₂O₅ were characterized by X-ray diffraction (XRD), EPR (Electron Paramagnetic Resonance), Optical absorption Spectra and FT-IR (Fourier transform Infrared Spectroscopy) studies. EPR spectra of all the glass samples exhibit resonance signals characterstic of VO²⁺ ions. The values of spin-Hamiltonian parameters indicate that the VO²⁺ ions in CSNB glasses were present in octahedral sites with tetragonal compression and belong to C_4v symmetry. Spin-Hamiltonian parameters ‘g’ and ‘A’ were evaluated. The Optical band energy (E_opt) and Urbach energy (ΔE) were calculated from their ultra violet edges. By correlating EPR and Optical data the molecular orbital coefficients have been evaluated. IR spectra of these glasses were analyzed in order to identify the contribution of each component to the local structure that determines the physical properties of these glasses.     

Effect of alumina on the structure and properties of Li2O–B2O3–P2O5 glasses

The structure of glasses within the system Li₂O–Al₂O₃–B₂O₃–P₂O₅ has been studied through ³¹P, ¹¹B and ²⁷Al Nuclear Magnetic Resonance, and the effect of Al₂O₃ substitution by B₂O₃ and P₂O₅ network formers on the structure and properties investigated for a constant Li₂O content. Multinuclear NMR results reveal that substitution of Al₂O₃ for B₂O₃ and P₂O₅ network formers in a glass with composition 50Li₂O·15B₂O₃·35P₂O₅ produces a change in boron environment from four-fold to three-fold coordination. Meanwhile aluminum can be present in four-, five- and six-fold coordinations a higher amount of Al(IV) groups is found for increasing alumina contents. The behavior of the glass transition temperature and electrical conductivity of the glasses has been interpreted as a function of the structural changes induced in the glass network when alumina is substituted for B₂O₃, P₂O₅ or both. Small additions of alumina produce a drastic increase in glass transition temperature, while it does not change for [Al₂O₃] greater than 3 mol.%. However, the electrical conductivity shows very different behavior depending on the type of substitution; it can remain constant when B₂O₃ content decreases or sharply decrease when P₂O₅ is substituted by Al₂O₃, which is attributed to a higher amount of BO₃ and phase separation.     

Synthesis and photoluminescence of Eu3+-doped ZnO–Ga2O3–SiO2 nano-glass-ceramics

Transparent rare-earth Eu³⁺-doped ZnO–Ga₂O₃–SiO₂ nano-glass-ceramics were obtained by a sol–gel method. X-ray diffraction and transmission electron microscopy were used to characterize the as-synthesized materials. Results showed that ZnGa₂O₄ nanocrystals with the size of 5 nm were precipitated from ZnO–Ga₂O₃–SiO₂ system and dispersed in the SiO₂-based glass when the heat-treatment temperature was up to 800 °C. Photoluminescence characterization of Eu³⁺-doped ZnO–Ga₂O₃–SiO₂ nano-glass-ceramics was carried out and the results show that the as-synthesized material display intense emission at 615 nm belonging to ⁵D₀ → ⁷F₂ transition.