Glucose-triggered release from liposomes incorporating poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-methacrylic acid-co-octadecylacrylate) and glucose oxidase

In order to design liposomes which release their contents in a glucose-sensitive manner, the surfaces of egg phosphatidylcholine (egg PC) liposomes or dioleoylphosphatidylethanolamine (DOPE) liposomes were modified with the copolymer of N-isopropylacrylamide/methacrylic acid/octadecylacrylate and hydrophobically modified glucose oxidase (EC 1.1.3.4.). Whichever the liposomes were prepared with egg PC or DOPE, an extensive release of calcein was observed at acidic conditions. And DOPE liposomes were more pH sensitive than egg PC liposomes in terms of the release. In glucose-dependent calcein release experiment, there was no release for 180 min when the suspension of liposome was free of glucose. When the glucose concentration was 50 mg/dl, no appreciable amount of calcein was released for the first 50 min, but a significant release was observed for the last 130 min. At glucose concentration of 200 mg/dl, calcein release became more extensive and the releases for 180 min from egg PC and DOPE liposome were 84% and 98%, respectively.     

Design of liposomes containing photopolymerizable phospholipids for triggered release of contents

We describe a novel class of light-triggerable liposomes prepared from a photo-polymerizable phospholipid DC_8,9PC (1,2-bis (tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) and DPPC (1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine). Exposure to UV (254 nm) radiation for 0–45 min at 25 °C resulted in photo-polymerization of DC_8,9PC in these liposomes and the release of an encapsulated fluorescent dye (calcein). Kinetics and extents of calcein release correlated with mol% of DC_8,9PC in the liposomes. Photopolymerization and calcein release occurred only from DPPC/DC_8,9PC but not from Egg PC/DC_8,9PC liposomes. Our data indicate that phase separation and packing of polymerizable lipids in the liposome bilayer are major determinants of photo-activation and triggered contents release.     

Interaction of ionic surfactants with cornea-mimicking anionic liposomes

The interaction of surface-active molecules with lipid bilayers is ubiquitous both in biological systems and also in several technological applications. Here we explore the interaction of ionic surfactants with liposomes whose composition mimics the ocular epithelia. In this study, liposomes with a composition mimicking ocular epithelia are loaded with calcein dye above the self-quenching concentration. The liposomes are then exposed to surfactants, and the rate of dye leaked from the liposomes due to the interaction of surfactants is measured. Both cationic and anionic surfactants at various concentrations and ionic strengths are explored. Results show that the liposome bilayer permeability to the dye increases on exposure to the surfactants, leading to the release of the dye trapped in the core. However, the dye release stops after a finite time, suggesting a transient increase in permeability followed by healing. The leakage profiles exhibit two different timescales for the cationic surfactant but only one timescale for the anionic surfactant. The total dye leakage increases with surfactant concentration, and at a given concentration, the dye leakage is significantly higher for the cationic surfactants. The timescale for the healing decreases with increasing surfactant concentration, and increasing ionic strength increases the dye leakage for the anionic surfactant. These results show that the surfactant binding to the lipid bilayer increases the permeability while the bilayers heal likely because of the surfactant jump from the outer to the inner leaflet and/or rearrangement into tighter aggregates.     

Electric impedance method for evaluation of the release property of calcein-encapsulated liposomes

This paper is concerned with the study on development of a novel method for evaluation of the liposomes release property by measuring the electric impedance changes of liposome suspensions. Calcein/NaOH encapsulated liposomes (calcein-liposomes) were prepared with deionized water and were treated with ultrasonic irradiation in order to investigate the release property of the liposomes. To validate the proposed impedance measuring method, the calcein release rates were evaluated both by the impedance changes and the fluorescence intensity changes in calcein-liposome suspensions. With the comparison of these results obtained by the two methods, it is shown that the impedance method has much wider detecting concentration range than the fluorescence one. Furthermore, the impedance method can be efficiently used for evaluation of the release property on various ionic substances encapsulated within liposomes.     

Integrity of liposomes in presence of various formulation excipients, when dispersed in aqueous media and in hydrogels

The integrity of liposomes when dispersed in presence of various common formulation excipients is studied. Additionally, the effect of the excipients on the release of calcein from the same liposomes when dispersed in hydrogels is investigated and the results of the two sets of experiments are compared. Propyleneglycol (PG), transcutol CG (TR), cremophor EL (CR) and labrafac hydro WL 1219 (LB) are used at 10 or 25% (v/v) and the retention of liposome encapsulated calcein is followed for 24 or 48 h periods. Calcein entrapping multilamellar liposomes composed of phosphatidylcholine (PC) or 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) with or without addition of different amounts of cholesterol (Chol) were prepared by the thin film hydration method.

Experimental results reveal that liposomes are affected more by the excipients in the order: LB > CR > PG  TR. Particularly LB and in some cases also CR result in rapid release of most or the entire vesicle encapsulated dye. Addition of Chol in both PC and DSPC liposomes results in substantial increase of vesicle integrity in all cases. Concerning the release of calcein form the liposomal gels, from DSPC/Chol (1:1) liposomal gels calcein release was not affected by addition of 25% of TR or PG in all gels studied, but LB caused a significant increase in calcein release. However, from PC-liposomal gels even TR and PG (at 25%), increases calcein release.

Conclusively, the results of this study suggest that liposomes are protected from excipients when dispersed in gels compared to aqueous media. This should be taken into account when liposomal drug formulations are designed.     

Active uptake of drugs into photosensitive liposomes and rapid release on UV photolysis

Liposomes containing high concentrations of the anticancer drug doxorubicin, prepared by active-loading techniques, have been intensively investigated as potential agents for chemotherapy. The present study investigates the possibility of active uptake and photoinduced release of such solutes from liposomes incorporating a photoisomerizable lipid. The active loading of acridine orange and doxorubicin was investigated using liposomes containing entrapped ammonium sulfate. The liposomes were prepared with dipalmitoyl-L-alpha-phosphatidyl choline (DPPC) and a photochromic lipid, (1,2-(4'-n-butylphenyl)azo-4'-(gamma-phenylbutyroyl))-glycero-3- phosphocholine (Bis-Azo PC), which isomerizes on exposure to near-UV light with resulting changes in membrane permeability to solutes. The rate of loading of the vesicles below the phase transition temperature of DPPC was investigated as a function of Bis-Azo PC and cholesterol concentrations in the liposome. The rate of doxorubicin uptake was found to be greatly decreased in the presence of cholesterol, while below 30 degrees C the rate of acridine orange uptake was increased in the presence of cholesterol. On exposure to a single UV laser pulse, actively loaded acridine orange was rapidly released from liposomes containing Bis-Azo PC at a rate similar to that found for the indicator dye calcein. However while cholesterol had previously been shown to greatly enhance the rate of photo-induced calcein leakage, it had no significant effect on the rate of acridine orange release. After active loading into DPPC vesicles containing Bis-Azo PC, doxorubicin was also released after exposure to a single laser pulse, but at a rate slower than for acridine orange and calcein. The difference in behavior between these systems is ascribed to the interactions of acridine orange and doxorubicin with the liposome bilayer. Photoinduced release of pharmacologically active materials from sensitized liposomes might provide a useful adjunct or alternative to conventional photodynamic therapy.     

Surface enhanced Raman scattering detection of water-soluble derivatives of fullerene C<Subscript>60</Subscript> and their covalent conjugates with dyes in biological model systems

The potential of surface enhanced Raman spectroscopy (SERS) for the detection of water-soluble fullerene derivatives and their covalent conjugates with xanthene dyes was investigated in model biological liposome membranes and in the albumin protein structure. It was shown that in liposomes and in albumin, fullerene derivatives and their covalent conjugates with dyes show characteristic SERS spectra, which allows detection of water-soluble fullerene derivatives in phosphatidylcholine liposomes at the lipid/fullerene derivative ratio of 100 as well as fullerene–dye conjugates in liposomes and albumin.     

Study of the interaction between cyclodextrins and liposome membranes: effect on the permeability of liposomes

We wanted to compare and understand the effect of the most currently used cyclodextrins on a model membrane. We studied the influence of most currently used cyclodextrins on the release of a fluorescent marker encapsulated in the inner cavity of SUV liposomes. It was shown that the observed effect on calcein release can be directly related to the affinity of cyclodextrins for both lipid components of liposomes, cholesterol and phosphatidylcholine. From this relationship, we were able to determine, for each cyclodextrin, a theoretical concentration giving rise to 50% or 100% calcein release. This theoretical concentration was confirmed experimentally.     

LASER MEDIATED RELEASE OF DYE FROM LIPOSOMES

Liposomes made from phospholipids and containing sulforhodamine dye (1-50 mM) have been irradiated with nanosecond and picosecond laser pulses. Individual liposomes were locally heated by laser absorption of dye dimers during a single laser pulse, and heating was sufficient to release the liposome contents. The extent of dye release produced by a single laser pulse was shown to be quantitatively dependent on several interdependent variables, including dye concentration, liposome size, laser excitation parameters and initial temperature of the dye-liposome system. Fluorescence lifetime data having three components have been obtained and analyzed in terms of three dye environments. Quantitative estimates support a photo-induced thermal mechanism for liposome lysis and release of its contents. These results may be useful for laser induced delivery of therapeutic agents or other applications of lasers in biological systems.     

Redox-triggered contents release from liposomes

An exciting new direction in responsive liposome research is endogenous triggering of liposomal payload release by overexpressed enzyme activity in affected tissues and offers the unique possibility of active and site-specific release. Bringing to fruition the fully expected capabilities of this new class of triggered liposomal delivery system requires a collection of liposome systems that respond to different upregulated enzymes; however, a relatively small number currently exist. Here we show that stable, approximately 100 nm diameter liposomes can be made from previously unreported quinone-dioleoyl phosphatidylethanolamine (Q-DOPE) lipids, and complete payload release (quenched fluorescent dye) from Q-DOPE liposomes occurs upon their redox activation when the quinone headgroup possesses specific substituents. The key component of the triggerable, contents-releasing Q-DOPE liposomes is a "trimethyl-locked" quinone redox switch attached to the N-terminus of DOPE lipids that undergoes a cleavage event upon two-electron reduction. Payload release by aggregation and leakage of "uncapped" Q-DOPE liposomes is supported by results from liposomes wherein deliberate alteration of the "trimethyl-locked" switch completely deactivates the redox-destructible phenomena (liposome opening). We expect that Q-DOPE liposomes and their variants will be important in treatment of diseases with associated tissues that overexpress quinone reductases, such as cancers and inflammatory diseases, because the quinone redox switch is a known substrate for this group of reductases.     

Liposomal drugs dispersed in hydrogels. Effect of liposome, drug and gel properties on drug release kinetics

Release of calcein and griseofulvin (GRF) from control (gels in which solutes are dissolved in) and liposomal gels was studied using agarose-assisted immobilization as a technique to separate gels from drug-receptor compartments. Liposomes composed of phosphatidylcholine (PC) or distearoyl-glycero-PC and cholesterol (DSPC/Chol), and incorporating calcein or GRF were prepared by thin film hydration. After cleaning the liposomes they were dispersed in different hydrogels (carbopol 974 [1, 1.5 or 2% (w/w)], hydroxylethyl-cellulose (HEC) [4% (w/w)], or a mixture of the two), and release of calcein or GRF was followed by fluorescence or photometric technique, respectively. Results show that calcein release from liposomal gels is slower compared to control gels, and can be further retarded by using rigid-membrane liposomes (faster release from PC-liposome compared to DSPC/Chol-liposome gels). Additionally, calcein release is not affected by the lipid amount loaded (in the range from 2 to 8 mg/ml), therefore solute loading can be controlled according to needs.

Oppositely, GRF release from liposomal gels is determined by drug loading. At high drug loading levels (compared to GRF aqueous solubility), GRF is released with constant rate from liposomal gels irrespective of liposome type (PC or DSPC/Chol). Thereby, for amphiphilic/lipophilic drugs, drug properties (solubility, log P) determine the system behavior.

Calcein and GRF release from control carbopol gels is faster compared to HEC and mixture gels. The same is true for calcein in liposomal gels. Carbopol gel rheological properties were found to be significantly different (compared to the other gels), implying that these characteristics are important for drug diffusion from gels.     

Signal enhancement of a micro-arrayed polydiacetylene (PDA) biosensor using gold nanoparticles

Polydiacetylene (PDA) liposomes possess unique properties that allow liposomes to change color and emit fluorescence in response to stimuli such as temperature, antibody-antigen interaction, pH, mechanical stress, and organic solvent. They have been studied extensively as signal transducers in biosensor applications. Here, we describe an antibody-based biosensor using PDA liposomes for detection of human immunoglobulin E (hIgE). Target hIgE chemically bound to hIgE monoclonal antibodies immobilized on PDA liposomes and the fluorescent signals were slightly increased depending on the target protein concentration. As the primary response, the hIgE could be detected to below 10 ng mL(-1). However, fluorescent signals were dramatically increased depending on the target protein concentration when gold nanoparticle-conjugated polyclonal antibody probes were added on the PDA liposomes after the primary immune reaction. A PDA liposome biosensor could detect the hIgE as low as 0.1 ng mL(-1) and the sensitivity was increased up to one hundred times higher than the primary response. As a result, we confirmed that gold nanoparticle-conjugated polyclonal antibody probes efficiently enhanced the fluorescent signal of the PDA liposome biosensor chip. This strategy can be useful to detect proteins of ultra-low concentration.     

Amphiphilic ESIPT benzoxazole derivatives as prospective fluorescent membrane probes

Fluorescent amphiphilic benzoxazole derivatives were synthesized and used to produce photoactive phosphatidylcholine (PC) liposomes by reserve-phase evaporation. The dyes absorbed in the UV region and were fluorescent in the blue-green region (determined by solvent polarity). The alkyl chain length seemed to play a fundamental role in the photophysics of the benzoxazole fluorophore in reverse liposomes, and despite the same ESIPT core and phospholipid building block, each amphiphilic dye had a particular emission profile related to the dye location in the liposome. The fluorescence emission spectra from dye 5 showed that its fluorophore experienced a polar environment, due to the single normal emission, while dyes 6–7 had (in part) a normal emission, and the main fluorescent band ascribed to the ESIPT emission indicated a more hydrophobic environment. Despite the complex fluorescent profiles, the benzoxazole derivatives could be successfully introduced into the reverse liposome structure due to the interaction between the alkyl chain and PC bilayer.     

Covalent immobilization of liposomes on plasma functionalized metallic surfaces

A method was developed to functionalize biomedical metals with liposomes. The novelty of the method includes the plasma-functionalization of the metal surface with proper chemical groups to be used as anchor sites for the covalent immobilization of the liposomes. Stainless steel (SS-316) disks were processed in radiofrequency glow discharges fed with vapors of acrylic acid to coat them with thin adherent films characterized by surface carboxylic groups, where liposomes were covalently bound through the formation of amide bonds. For this, liposomes decorated with polyethylene glycol molecules bearing terminal amine-groups were prepared. After ensuring that the liposomes remain intact, under the conditions applying for immobilization; different attachment conditions were evaluated (incubation time, concentration of liposome dispersion) for optimization of the technique. Immobilization of calcein-entrapping liposomes was evaluated by monitoring the percent of calcein attached on the surfaces. Best results were obtained when liposome dispersions with 5mg/ml (liposomal lipid) concentration were incubated on each disk for 24h at 37°C. The method is proposed for developing drug-eluting biomedical materials or devices by using liposomes that have appropriate membrane compositions and are loaded with drugs or other bioactive agents.     

Tripolyphosphate-sensitive egg phosphatidylcholine liposomes incorporating hydrophobically modified poly(ethylene imine)

Liposomes, which release their contents in answer to tripolyphosphate (TPP, a penta-anion), were prepared by immobilizing hydrophobically modified poly(ethylene imine) (HmPEI) on the surface of egg phosphatidylcholine (egg PC) liposome. HmPEI was prepared by covalently attaching decanoyl chloride to PEI through a condensation reaction. According to the ¹H NMR spectrum, the number of decanoyl chloride per one molecule of PEI was about 21, and HmPEI was air/water interface-active. HmPEI could readily complex with TPP in HEPES buffer (30 mM, pH 7.0), confirmed by Fourier transformed infrared spectrophotometer spectroscopy. The complexation increased with increasing the concentration of HmPEI and TPP, investigated through the measurement of optical density and light scattering intensity. Liposomes incorporating HmPEI were prepared by a film hydration and sonication method. The liposomes were multi-lamellar vesicles, observed on transmission electron microscope. Liposomes free of HmPEI did not release calcien when they were mixed with TPP. Liposomes whose egg PC/HmPEI was relatively low (e.g., 20:1 and 20:2) released calcein but not extensively (less than 10%) when mixed with TPP. Liposomes whose egg PC/HmPEI was relatively high (e.g., 20:4 and 20:20) released calcein extensively. For example, when the liposomes with lager amount of HmPEI were mixed with TPP so that HmPEI/TPP weight ratio was 8:1, the release degree in 60 sec was more than 70%. HmPEI can complex with TPP through electrostatic interaction and the complexation was thought to cause perturbation in the liposomal membranes and trigger the release.     

Liposome chromatography: liposomes immobilized in gel beads as a stationary phase for aqueous column chromatography

Liposomes have been used as a stationary phase for column chromatography with an aqueous mobile phase. They were immobilized in the pores of carrier gel beads by two methods: (A) hydrophobic ligands were coupled to the matrix of gel beads, which then were packed into a column and liposomes were applied and became associated with the ligands by hydrophobic interaction; and (B) phospholipids and detergent were dialysed in the presence of gel beads; many of the liposomes that formed in the pores of the beads were sterically immobilized by the gel matrix. Proteoliposomes containing red cell glucose transport protein in the lipid bilayers were immobilized in a column by method A. This column retained D-glucose longer than L-glucose. In contrast to L-glucose, D-glucose was transported into and out of the immobilized liposomes, causing an increased retention. Liposomes with (stearylamine)+ or (phosphatidylserine)- in their lipid bilayers were immobilized by method B and the gel beads were packed into a column. A protein of opposite charge was applied in excess. Under suitable conditions, the protein molecules became close-packed on the liposome surfaces. Ion-exchange chromatographic experiments with proteins showed that these sterically immobilized liposomes were also stable enough to be used as a stationary phase. The loss of lipids was 5-23% in the first run at high protein load and with sodium chloride gradient elution but was lower in subsequent runs. It is proposed that water-soluble molecules can be separated and their interactions with liposome surfaces studied by chromatography on immobilized liposomes in detergent-free aqueous solution. Membrane proteins can be inserted and ligands can be anchored in the lipid bilayers for chromatographic purposes.     

Liposome layers characterized by quartz crystal microbalance measurements and multirelease delivery

Intact liposomes have been immobilized onto solid surfaces by a NeutrAvidin-biotin link. The construction of these layers has been followed up by X-ray photoelectron spectroscopy (XPS) and quartz crystal microbalance (QCM) measurements with energy dissipation monitoring. Also, the simultaneous release of two fluorescent probes from these liposome layers has been investigated with the aim to validate this method in multirelease delivery systems. XPS showed the successful immobilization of the different layers. XPS results also point out the importance of the deactivation method used to reveal the presence of the specific NeutrAvidin-biotin attachment. QCM measurements allowed the buildup of the different layers to be followed in real time and in situ and suggest that biotinylated liposomes stay intact upon surface attachment on NeutrAvidin-covered surfaces and had viscoelastic behavior. QCM experiments also demonstrated that surface-immobilized liposomes were able to resist irreversible adsorption from fetal bovine serum. Release kinetic profiles were studied by monitoring the release of two different fluorescent probes, namely, carboxyfluorescein and levofloxacin, from these liposome layers. These studies showed that it was possible to modulate to some extent the release rates of the two molecules by using different configurations of liposome layers.     

Intrinsic heterogeneity in liposome suspensions caused by the dynamic spontaneous formation of hydrophobic active sites in lipid membranes

The spontaneous, dynamic formation of hydrophobic active sites in lipid bilayer membranes is studied and characterized. It is shown that the rates of formation and consumption of these active sites control at least two important properties of liposomes: their affinity for hydrophobic surfaces and the rate by which they spontaneously release encapsulated molecules. The adhesion and spreading of liposomes onto hydrophobic polystyrene nanoparticles and the spontaneous leakage of an encapsulated fluorescent dye were monitored for different liposome compositions employing Cryo-TEM, DLS, and fluorescence measurements. It was observed that an apparently homogeneous, monodisperse liposome suspension behaves as if composed by two different populations: a fast leaking population that presents affinity for the hydrophobic substrate employed, and a slow leaking population that does not attach immediately to it. The results reported here suggest that the proportion of liposomes in each population changes over time until a dynamic equilibrium is reached. It is shown that this phenomenon can lead to irreproducibility in, for example, spontaneous leakage experiments, as extruded liposomes leak much faster just after preparation than 24 h afterward. Our findings account for discrepancies in several experimental results reported in the literature. To our knowledge, this is the first systematic study addressing the issue of an existing intrinsic heterogeneity of liposome suspensions.     

Liposomes loaded with quantum dots for ultrasensitive on-site determination of aflatoxin M1 in milk products

A quantitative fluorescence-labeled immunosorbent assay and qualitative on-site column tests were developed for the determination of aflatoxin M1 in milk products. The use of liposomes loaded with quantum dots as a label significantly increased the assay sensitivity by encapsulating multiple quantum dots in a single liposome and, therefore, amplifying the analytical signal. Two different techniques were compared to obtain aflatoxin–protein conjugates, used for further coupling with the liposomes. The influence of nonspecific interactions of the liposome-labeled conjugates obtained with the surface of microtiter plates and column cartridges was evaluated and discussed. The limit of detection for fluorescence-labeled immunosorbent assay was 0.014 μg kg^-1. For qualitative on-site tests, the cutoff was set at 0.05μg kg^-1, taking into account the EU maximum level for aflatoxin M1 in raw milk, heat-treated milk, and milk for the manufacture of milk-based products. The direct addition of labeled conjugate to the milk samples resulted in an additional decrease of analysis time. An intralaboratory validation was performed with sterilized milk and cream samples artificially spiked with aflatoxin M1 at concentrations less than, equal to and greater than the cutoff level. It is shown that milk products can be analyzed without any sample preparation, just diluted with the buffer. The rates for false-positive and false-negative results were below 5 % (2.6 % and 3.3 %, respectively).

Reduction-sensitive liposomes from a multifunctional lipid conjugate and natural phospholipids: reduction and release kinetics and cellular uptake

The development of targeted and triggerable delivery systems is of high relevance for anticancer therapies. We report here on reduction-sensitive liposomes composed of a novel multifunctional lipidlike conjugate, containing a disulfide bond and a biotin moiety, and natural phospholipids. The incorporation of the disulfide conjugate into vesicles and the kinetics of their reduction were studied using dansyl-labeled conjugate 1 in using the dansyl fluorescence environmental sensitivity and the Fo?rster resonance energy transfer from dansyl to rhodamine-labeled phospholipids. Cleavage of the disulfide bridge (e.g., by tris(2-carboxyethyl)phosphine (TCEP), dithiothreitol (DTT), l-cysteine, or glutathione (GSH)) removed the hydrophilic headgroup of the conjugate and thus changed the membrane organization leading to the release of entrapped molecules. Upon nonspecific uptake of vesicles by macrophages, calcein release from reduction-sensitive liposomes consisting of the disulfide conjugate and phospholipids was more efficient than from reduction-insensitive liposomes composed only of phospholipids. The binding of streptavidin to the conjugates did not interfere with either the subsequent reduction of the disulfide bond of the conjugate or the release of entrapped molecules. Breast cancer cell line BT-474, overexpressing the HER2 receptor, showed a high uptake of the reduction-sensitive doxorubicin-loaded liposomes functionalized with the biotin-tagged anti-HER2 antibody. The release of the entrapped cargo inside the cells was observed, implying the potential of using our system for active targeting and delivery.