Hydrophilic sulfonated bis-1,2,4-triazine ligands are highly effective reagents for separating actinides(iii) from lanthanides(iii) via selective formation of aqueous actinide complexes

We report the first examples of hydrophilic 6,6′-bis(1,2,4-triazin-3-yl)-2,2′-bipyridine (BTBP) and 2,9-bis(1,2,4-triazin-3-yl)-1,10-phenanthroline (BTPhen) ligands, and their applications as actinide(iii) selective aqueous complexing agents. The combination of a hydrophobic diamide ligand in the organic phase and a hydrophilic tetrasulfonated bis-triazine ligand in the aqueous phase is able to separate Am(iii) from Eu(iii) by selective Am(iii) complex formation across a range of nitric acid concentrations with very high selectivities, and without the use of buffers. In contrast, disulfonated bis-triazine ligands are unable to separate Am(iii) from Eu(iii) in this system. The greater ability of the tetrasulfonated ligands to retain Am(iii) selectively in the aqueous phase than the corresponding disulfonated ligands appears to be due to the higher aqueous solubilities of the complexes of the tetrasulfonated ligands with Am(iii). The selectivities for Am(iii) complexation observed with hydrophilic tetrasulfonated bis-triazine ligands are in many cases far higher than those found with the polyaminocarboxylate ligands previously used as actinide-selective complexing agents, and are comparable to those found with the parent hydrophobic bis-triazine ligands. Thus we demonstrate a feasible alternative method to separate actinides from lanthanides than the widely studied approach of selective actinide extraction with hydrophobic bis-1,2,4-triazine ligands such as CyMe₄-BTBP and CyMe₄-BTPhen.     

Quinol-containing ligands enable high superoxide dismutase activity by modulating coordination number,charge, oxidation states and stability of manganese complexes throughout redox cycling

Reactivity assays previously suggested that two quinol-containing MRI contrast agent sensors for H₂O₂, [Mn(H2qp1)(MeCN)]²⁺ and [Mn(H4qp2)Br₂], could also catalytically degrade superoxide. Subsequently, [Zn(H2qp1)(OTf)]⁺ was found to use the redox activity of the H2qp1 ligand to catalyze the conversion of O₂˙⁻ to O₂ and H₂O₂, raising the possibility that the organic ligand, rather than the metal, could serve as the redox partner for O₂˙⁻ in the manganese chemistry. Here, we use stopped-flow kinetics and cryospray-ionization mass spectrometry (CSI-MS) analysis of the direct reactions between the manganese-containing contrast agents and O₂˙⁻ to confirm the activity and elucidate the catalytic mechanism. The obtained data are consistent with the operation of multiple parallel catalytic cycles, with both the quinol groups and manganese cycling through different oxidation states during the reactions with superoxide. The choice of ligand impacts the overall charges of the intermediates and allows us to visualize complementary sets of intermediates within the catalytic cycles using CSI-MS. With the diquinolic H4qp2, we detect Mn(iii)-superoxo intermediates with both reduced and oxidized forms of the ligand, a Mn(iii)-hydroperoxo compound, and what is formally a Mn(iv)-oxo species with the monoquinolate/mono-para-quinone form of H4qp2. With the monoquinolic H2qp1, we observe a Mn(ii)-superoxo ↔ Mn(iii)-peroxo intermediate with the oxidized para-quinone form of the ligand. The observation of these species suggests inner-sphere mechanisms for O₂˙⁻ oxidation and reduction that include both the ligand and manganese as redox partners. The higher positive charges of the complexes with the reduced and oxidized forms of H2qp1 compared to those with related forms of H4qp2 result in higher catalytic activity (k_cat ∼ 10⁸ M⁻¹ s⁻¹ at pH 7.4) that rivals those of the most active superoxide dismutase (SOD) mimics. The manganese complex with H2qp1 is markedly more stable in water than other highly active non-porphyrin-based and even some Mn(ii) porphyrin-based SOD mimics.

Manganese complexes with polydentate quinol-containing ligands are found to catalyze the degradation of superoxide through inner-sphere mechanisms. The redox activity of the ligand stabilizes higher-valent manganese species.     

Structure,reactivity and luminescence studies of triphenylsiloxide complexes of tetravalent lanthanides

Among the 14 lanthanide elements (Ce–Lu), until recently, the tetravalent oxidation state was readily accessible in solution only for cerium while Pr(iv), Nd(iv), Dy(iv) and Tb(iv) had only been detected in the solid state. The triphenylsiloxide ligand recently allowed the isolation of molecular complexes of Tb(iv) and Pr(iv) providing an unique opportunity of investigating the luminescent properties of Ln(iv) ions. Here we have expanded the coordination studies of the triphenylsiloxide ligand with Ln(iii) and Ln(iv) ions and we report the first observed luminescence emission spectra of Pr(iv) complexes which are assigned to a ligand-based emission on the basis of the measured lifetime and computational studies. Binding of the ligand to the Pr(iv) ion leads to an unprecedented large shift of the ligand triplet state which is relevant for future applications in materials science.

The first observed luminescence emission spectra of Pr(iv) complexes are assigned to a ligand-based emission. Binding of the triphenylsiloxide ligand to the Pr(iv) ion leads to an unprecedented large red shift of its triplet state.     

Highly efficient carbazolylgold(iii) dendrimers based on thermally activated delayed fluorescence and their application in solution-processed organic light-emitting devices

A new class of C^C^N ligand-containing carbazolylgold(iii) dendrimers has been designed and synthesized. High photoluminescence quantum yields of up to 82% in solid-state thin films and large radiative decay rate constants in the order of 10⁵ s⁻¹ are observed. These gold(iii) dendrimers are found to exhibit thermally activated delayed fluorescence (TADF), as supported by variable-temperature emission spectroscopy, time-resolved photoluminescence decay and computational studies. Solution-processed organic light-emitting diodes (OLEDs) based on these gold(iii) dendrimers have been fabricated, which exhibit a maximum current efficiency of 52.6 cd A⁻¹, maximum external quantum efficiency of 15.8% and high power efficiency of 41.3 lm W⁻¹. The operational stability of these OLEDs has also been recorded, with the devices based on zero- and second-generation dendrimers showing maximum half-lifetimes of 1305 and 322 h at 100 cd m⁻², respectively, representing the first demonstration of operationally stable solution-processed OLEDs based on gold(iii) dendrimers.

A new class of carbazolylgold(iii) C^C^N dendrimers with thermally activated delayed fluorescence properties has been designed and synthesized for the realzaqtion of operationally stable solution-processed organic light-emitting devices.     

Low power threshold photochemical upconversion using a zirconium(iv) LMCT photosensitizer

The current investigation demonstrates highly efficient photochemical upconversion (UC) where a long-lived Zr(iv) ligand-to-metal charge transfer (LMCT) complex serves as a triplet photosensitizer in concert with well-established 9,10-diphenylanthracene (DPA) along with newly conceived DPA–carbazole based acceptors/annihilators in THF solutions. The initial dynamic triplet–triplet energy transfer (TTET) processes (ΔG ∼ −0.19 eV) featured very large Stern–Volmer quenching constants (K_SV) approaching or achieving 10⁵ M⁻¹ with bimolecular rate constants between 2 and 3 × 10⁸ M⁻¹ s⁻¹ as ascertained using static and transient spectroscopic techniques. Both the TTET and subsequent triplet–triplet annihilation (TTA) processes were verified and throughly investigated using transient absorption spectroscopy. The Stern–Volmer metrics support 95% quenching of the Zr(iv) photosensitizer using modest concentrations (0.25 mM) of the various acceptor/annihilators, where no aggregation took place between any of the chromophores in THF. Each of the upconverting formulations operated with continuous-wave linear incident power dependence (λ_ex = 514.5 nm) down to ultralow excitation power densities under optimized experimental conditions. Impressive record-setting η_UC values ranging from 31.7% to 42.7% were achieved under excitation conditions (13 mW cm⁻²) below that of solar flux integrated across the Zr(iv) photosensitizer''s absorption band (26.7 mW cm⁻²). This study illustrates the importance of supporting the continued development and discovery of molecular-based triplet photosensitizers based on earth-abundant metals.

The LMCT photosensitizer Zr(^MesPDP^Ph)₂ paired with DPA-based acceptors enabled low power threshold photochemical upconversion with record-setting quantum efficiencies.     

Influence of the primary and secondary coordination spheres on nitric oxide adsorption and reactivity in cobalt(ii)–triazolate frameworks

Nitric oxide (NO) is an important signaling molecule in biological systems, and as such, the ability of porous materials to reversibly adsorb NO is of interest for potential medical applications. Although certain metal–organic frameworks are known to bind NO reversibly at coordinatively unsaturated metal sites, the influence of the metal coordination environment on NO adsorption has not been studied in detail. Here, we examine NO adsorption in the frameworks Co₂Cl₂(bbta) (H₂bbta = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole) and Co₂(OH)₂(bbta) using gas adsorption, infrared spectroscopy, powder X-ray diffraction, and magnetometry. At room temperature, NO adsorbs reversibly in Co₂Cl₂(bbta) without electron transfer, with low temperature data supporting spin-crossover of the NO-bound cobalt(ii) centers of the material. In contrast, adsorption of low pressures of NO in Co₂(OH)₂(bbta) is accompanied by charge transfer from the cobalt(ii) centers to form a cobalt(iii)–NO⁻ adduct, as supported by diffraction and infrared spectroscopy data. At higher pressures of NO, characterization data indicate additional uptake of the gas and disproportionation of the bound NO to form a cobalt(iii)–nitro (NO₂⁻) species and N₂O gas, a transformation that appears to be facilitated by secondary sphere hydrogen bonding interactions between the bound NO₂⁻ and framework hydroxo groups. These results provide a rare example of reductive NO binding in a cobalt-based metal–organic framework, and they demonstrate that NO uptake can be tuned by changing the primary and secondary coordination environment of the framework metal centers.

Nitric oxide (NO) shows differences in adsorption and reactivity in two related cobalt(ii)–triazolate frameworks, demonstrating how the primary and secondary coordination sphere of metal centers in adsorbents can be designed for targeted delivery.     

Stoichiometric to catalytic reactivity of the aryl cycloaurated species with arylboronic acids: insight into the mechanism of gold-catalyzed oxidative C(sp2)–H arylation

Based on the well-defined five-membered aryl gold(iii) complexes, [Au(tpy)X₂] (3a and 3b) and [AuBr(Ph)(tpy)] (7), as well as the aryl gold(iii) complex [AuCl₂(Ph)(tpy)] (8) (tpy = 2-(o-tolyl)pyridine) as reliable models, we present a detailed study of the mechanism for gold(iii)-catalyzed oxidative cross-coupling reactions between cycloaurable arenes and arylboronic acids. Here we report the direct evidence for a mechanistic proposal including arene C–H activation, transmetallation and biaryl reductive elimination. The chelation-assisted C–H activation strategy has been used for the development of the gold(iii)-catalyzed C–H bond arylation of arenes with aryl reagents to forge extended π-conjugated systems.     

Nitride protonation and NH3 binding versus N–H bond cleavage in uranium nitrides

The conversion of metal nitrides to NH₃ is an essential step in dinitrogen fixation, but there is limited knowledge of the reactivity of nitrides with protons (H⁺). Herein, we report comparative studies for the reactions of H⁺ and NH₃ with uranium nitrides, containing different types of ancillary ligands. We show that the differences in ancillary ligands, leads to dramatically different reactivity. The nitride group, in nitride-bridged cationic and anionic diuranium(iv) complexes supported by –N(SiMe₃)₂ ligands, is resistant toward protonation by weak acids, while stronger acids result in ligand loss by protonolysis. Moreover, the basic –N(SiMe₃)₂ ligands promote the N–H heterolytic bond cleavage of NH₃, yielding a “naked” diuranium complex containing three bridging ligands, a nitride (N³⁻) and two NH₂ ligands. Conversely, in the nitride-bridged diuranium(iv) complex supported by –OSi(O^tBu)₃ ligands, the nitride group is easily protonated to afford NH₃, which binds the U(iv) ion strongly, resulting in a mononuclear U–NH₃ complex, where NH₃ can be displaced by addition of strong acids. Furthermore, the U–OSi(O^tBu)₃ bonds were found to be stable, even in the presence of stronger acids, such as NH₄BPh₄, therefore indicating that –OSi(O^tBu)₃ supporting ligands are well suited to be used when acidic conditions are required, such as in the H⁺/e⁻ mediated catalytic conversion of N₂ to NH₃.

Ancillary ligands alter the reactivity of U-nitrides with H⁺, relevant to N₂ conversion to NH₃. The amides lead to complete ligand loss and NH₃ activation, while for siloxides, the nitride is protonated to NH₃ leaving the ancillary ligands intact.     

Genomics-driven discovery of chiral triscatechol siderophores with enantiomeric Fe(iii) coordination

Ferric complexes of triscatechol siderophores may assume one of two enantiomeric configurations at the iron site. Chirality is known to be important in the iron uptake process, however an understanding of the molecular features directing stereospecific coordination remains ambiguous. Synthesis of the full suite of (DHB^L/DLys^L/DSer)₃ macrolactone diastereomers, which includes the siderophore cyclic trichrysobactin (CTC), enables the effects that the chirality of Lys and Ser residues exert on the configuration of the Fe(iii) complex to be defined. Computationally optimized geometries indicate that the Λ/Δ configurational preferences are set by steric interactions between the Lys sidechains and the peptide backbone. The ability of each (DHB^L/DLys^L/DSer)₃ diastereomer to form a stable Fe(iii) complex prompted a genomic search for biosynthetic gene clusters (BGCs) encoding the synthesis of these diastereomers in microbes. The genome of the plant pathogen Dickeya chrysanthemi EC16 was sequenced and the genes responsible for the biosynthesis of CTC were identified. A related but distinct BGC was identified in the genome of the opportunistic pathogen Yersinia frederiksenii ATCC 33641; isolation of the siderophore from Y. frederiksenii ATCC 33641, named frederiksenibactin (FSB), revealed the triscatechol oligoester, linear-(DHB^LLys^LSer)₃. Circular dichroism (CD) spectroscopy establishes that Fe(iii)–CTC and Fe(iii)–FSB are formed in opposite enantiomeric configuration, consistent with the results of the ferric complexes of the cyclic (DHB^L/DLys^L/DSer)₃ diastereomers.

Synthesis and genome mining leverage access to diastereomers of the siderophore cyclic trichrysobactin. Computational modeling and CD spectroscopy address effects that ligand-based stereochemistry exerts on the configuration at Fe(iii).     

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

The classic and most widely used co-reactant electrochemiluminescence (ECL) reaction of tris(2,2′-bipyridine)ruthenium(ii) ([Ru(bpy)₃]²⁺) and tri-n-propylamine is enhanced by an order of magnitude by fac-[Ir(sppy)₃]³⁻ (where sppy = 5′-sulfo-2-phenylpyridinato-C²,N), through a novel ‘redox mediator’ pathway. Moreover, the concomitant green emission of [Ir(sppy)₃]³⁻* enables internal standardisation of the co-reactant ECL of [Ru(bpy)₃]²⁺. This can be applied using a digital camera as the photodetector by exploiting the ratio of R and B values of the RGB colour data, providing superior sensitivity and precision for the development of low-cost, portable ECL-based analytical devices.

A water-soluble Ir(iii) complex is shown to enhance the ‘remote’ mechanism of the most widely used co-reactant ECL reaction of tris(2,2′-bipyridine)ruthenium(ii) with tripropylamine.     

Enhanced visible light absorption in layered Cs3Bi2Br9 through mixed-valence Sn(ii)/Sn(iv) doping

Lead-free halides with perovskite-related structures, such as the vacancy-ordered perovskite Cs₃Bi₂Br₉, are of interest for photovoltaic and optoelectronic applications. We find that addition of SnBr₂ to the solution-phase synthesis of Cs₃Bi₂Br₉ leads to substitution of up to 7% of the Bi(iii) ions by equal quantities of Sn(ii) and Sn(iv). The nature of the substitutional defects was studied by X-ray diffraction, ¹³³Cs and ¹¹⁹Sn solid state NMR, X-ray photoelectron spectroscopy and density functional theory calculations. The resulting mixed-valence compounds show intense visible and near infrared absorption due to intervalence charge transfer, as well as electronic transitions to and from localised Sn-based states within the band gap. Sn(ii) and Sn(iv) defects preferentially occupy neighbouring B-cation sites, forming a double-substitution complex. Unusually for a Sn(ii) compound, the material shows minimal changes in optical and structural properties after 12 months storage in air. Our calculations suggest the stabilisation of Sn(ii) within the double substitution complex contributes to this unusual stability. These results expand upon research on inorganic mixed-valent halides to a new, layered structure, and offer insights into the tuning, doping mechanisms, and structure–property relationships of lead-free vacancy-ordered perovskite structures.

Mixed valence Sn doping of Cs₃Bi₂Br₉ leads to broad visible light absorption.     

Molecular design of efficient yellow- to red-emissive alkynylgold(iii) complexes for the realization of thermally activated delayed fluorescence (TADF) and their applications in solution-processed organic light-emitting devices

Here, we report the design and synthesis of a new class of fused heterocyclic alkynyl ligand-containing gold(iii) complexes, which show tunable emission colors spanning from the yellow to red region in the solid state and exhibit thermally activated delayed fluorescence (TADF) properties. These complexes display high photoluminescence quantum yields of up to 0.87 and short excited-state lifetimes in sub-microsecond timescales, yielding high radiative decay rate constants on the order of up to 10⁶ s⁻¹. The observation of the drastic enhancement in the emission intensity of the complexes with insignificant change in the excited-state lifetime upon increasing the temperature from 200 to 360 K indicates an increasing radiative decay rate. The experimentally estimated energy splitting between the lowest-lying singlet excited state (S₁) and the lowest-lying triplet excited state (T₁), ΔE_S1–T1, is found to be as small as ∼0.03 eV (250 cm⁻¹), comparable to the value of ∼0.05 eV (435 cm⁻¹) obtained from computational studies. The delicate choice of the cyclometalating ligand and the fused heterocyclic ligand is deemed the key to induce TADF through the control of the energy levels of the intraligand and the ligand-to-ligand charge transfer excited states. This work represents the realization of highly emissive yellow- to red-emitting gold(iii) TADF complexes incorporated with fused heterocyclic alkynyl ligands and their applications in organic light-emitting devices.

We report the design of a new class of fused heterocyclic alkynyl ligand-containing gold(iii) complexes, which shows tunable emission colors spanning yellow to red region and exhibits thermally activated delayed fluorescence (TADF) properties.     

Oxovanadium(<Emphasis Type="SmallCaps">iv</Emphasis>) cations in heterometallic and heteroligand complex formation

The formation of heterometallic oxovanadium(iv) diethylenetriaminepentaacetates with titanium(iii), chromium(iii), cobalt(ii), nickel(ii), and manganese(ii) cations in aqueous solutions was studied by spectrophotometry and pH-metry. The stabilizing influence of heterometallic chelation on an unstable oxidation state of Ti ⁱⁱⁱ and the labilizing effect of oxovanadium(iv) cations on the coordination of Cr ⁱⁱⁱ cations by the carboxylate ligand anions in the heterometallic complex were shown. The optimum conditions for the formation of the heterometallic dtpa complexes were selected and their thermodynamic stability was estimated. The states of the oxovanadium(iv) cations in the monoand heteroligand systems involving polyamine, polyaminopolycarboxylate, and alkylpolyphosphonate ligands were studied. Specific features of ligand coordination and formation of the mixed-ligand chelates were investigated. A variety of molecular compositions of complex oxovanadium(iv) oxyethylenediphosphonate particles formed in ranges of pH 2.2—3.0, 4.5—5.5, and 6.3—6.4 was found. The preferability of formation of polynuclear oxovanadium(iv) oxyethylidenediphosphonates, viz., binuclear particles with oxovanadium(iv) cation to ligand molar ratios of 2 : 1 and 2 : 5 and trinuclear particles with a molar ratio of components of 3 : 2, was shown.     

Accessing lanthanide-based,in situ illuminated optical turn-on probes by modulation of the antenna triplet state energy

Luminescent lanthanides possess ideal properties for biological imaging, including long luminescent lifetimes and emission within the optical window. Here, we report a novel approach to responsive luminescent Tb(iii) probes that involves direct modulation of the antenna excited triplet state energy. If the triplet energy lies too close to the ⁵D₄ Tb(iii) excited state (20 500 cm⁻¹), energy transfer to ⁵D₄ competes with back energy transfer processes and limits lanthanide-based emission. To validate this approach, a series of pyridyl-functionalized, macrocyclic lanthanide complexes were designed, and the corresponding lowest energy triplet states were calculated using density functional theory (DFT). Subsequently, three novel constructs L3 (nitro-pyridyl), L4 (amino-pyridyl) and L5 (fluoro-pyridyl) were synthesized. Photophysical characterization of the corresponding Gd(iii) complexes revealed antenna triplet energies between 25 800 and 30 400 cm⁻¹ and a 500-fold increase in quantum yield upon conversion of Tb(L3) to Tb(L4) using the biologically relevant analyte H₂S. The corresponding turn-on reaction can be monitored using conventional, small-animal optical imaging equipment in presence of a Cherenkov radiation emitting isotope as an in situ excitation source, demonstrating that antenna triplet state energy modulation represents a viable approach to biocompatible, Tb-based optical turn-on probes.

The rational, analyte-mediated modulation of the relative energy of the lanthanide-sensitizing triplet state produces Tb-based luminescence, observable by a conventional optical imager in presence of the Cherenkov radiation emitting radioisotope ¹⁸F.     

Induction of targeted necrosis with HER2-targeted platinum(iv) anticancer prodrugs

It is well-recognized that the failure of many chemotherapeutics arises due to an inability to induce apoptosis. Most cancers acquire a myriad of pro-survival adaptations, and the vast heterogeneity and accumulation of multiple often unrelated anti-apoptotic signaling pathways have been a major stumbling block towards the development of conventional chemotherapeutics, which can overcome drug resistance. We have developed highly potent and selective HER2-targeted Pt(iv) prodrugs bearing anti-HER2/neu peptides that induce targeted necrosis as a novel strategy to circumvent apoptosis-resistance. These Pt(iv)–peptide conjugates exhibit a unique biphasic mode of cytotoxicity comprising rapid killing of cancer cells via necrosis in the first phase followed by an extended and gradual phase of delayed cell death. We demonstrate that these Pt(iv)–peptide prodrugs are more potent than their Pt(ii) congeners in direct cell-killing and exhibit comparable long-term inhibition of proliferative capacity and with greater selectivity against HER2-positive cancer cells.     

The gold(i)···lead(ii) interaction: a relativistic connection

The crystal structure of complex [Pb{HB(pz)₃}Au(C₆Cl₅)₂] 1 displays an unsupported Au(i)···Pb(ii) interaction. This complex emits at 480 nm in the solid state due to an aurate(i) to lead(ii) charge transfer, in which the existence of a metallophilic interaction is a pre-requisite. Ab initio calculations show a very strong Au(i)···Pb(ii) closed-shell interaction of –390 kJ mol^–1, which has an ionic plus a dispersive (van der Waals) nature strengthened by large relativistic effects (>17%).     

Understanding the mechanism of direct visible-light-activated [2 + 2] cycloadditions mediated by Rh and Ir photocatalysts: combined computational and spectroscopic studies

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques. Experimental observations show that the Rh-based photocatalyst produces excellent yield and enantioselectivity whereas the Ir-photocatalyst yields racemates. Two different mechanistic features were found to compete with each other, namely the direct photoactivation of the catalyst–substrate complex and outer-sphere triplet energy transfer. Our integrated analysis suggests that the direct photocatalysis is the inner working of the Rh-catalyzed reaction, whereas the Ir catalyst serves as a triplet sensitizer that activates cycloaddition via an outer-sphere triplet excited state energy transfer mechanism.

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques.     

Encapsulation of Pt(iv) prodrugs within a Pt(ii) cage for drug delivery

This report presents a novel strategy that facilitates delivery of multiple, specific payloads of Pt(iv) prodrugs using a well-defined supramolecular system. This delivery system comprises a hexanuclear Pt(ii) cage that can host four Pt(iv) prodrug guest molecules. Relying on host–guest interactions between adamantyl units tethered to the Pt(iv) molecules and the cage, four prodrugs could be encapsulated within one cage. This host–guest complex, exhibiting a diameter of about 3 nm, has been characterized by detailed NMR spectroscopic measurements. Owing to the high positive charge, this nanostructure exhibits high cellular uptake. Upon entering cells and reacting with biological reductants such as ascorbic acid, the host–guest complex releases cisplatin, which leads to cell cycle arrest and apoptosis. The fully assembled complex displays cytotoxicity comparable to that of cisplatin against a panel of human cancer cell lines, whereas the cage or the Pt(iv) guest alone exhibit lower cytotoxicity. These findings indicate the potential of utilising well-defined supramolecular constructs for the delivery of prodrug molecules.     

Chelation-assisted C–C bond activation of biphenylene by gold(i) halides

A chelation-assisted oxidative addition of gold(i) into the C–C bond of biphenylene is reported here. The presence of a coordinating group (pyridine, phosphine) in the biphenylene unit enabled the use of readily available gold(i) halide precursors providing a new, straightforward entry towards cyclometalated (N^C^C)- and (P^C)-gold(iii) complexes. Our study, combining spectroscopic and crystallographic data with DFT calculations, showcases the importance of neighboring, weakly coordinating groups towards the successful activation of strained C–C bonds by gold.

Pyridine and phosphine directing groups promote the C–C activation of biphenylene by readily available gold(i) halides rendering a new entry to (N^C^C)- and (P^C)-gold(iii) species.

Activation of C–C bonds by transition metals is challenging given their inertness and ubiquitous presence alongside competing C–H bonds.¹ Both the intrinsic steric hindrance as well as the highly directional character of the p orbitals involved in the σ_C–C bond impose a high kinetic barrier for this type of processes.^2,3 Biphenylene, a stable antiaromatic system featuring two benzene rings connected via a four-membered cycle, has found widespread application in the study of C–C bond activation. Since the seminal report from Eisch et al. on the oxidative addition of a nickel(0) complex into the C–C bond of biphenylene,⁴ several other late transition metals have been successfully applied in this context.⁵ Interestingly, despite the general reluctance of gold(i) to undergo oxidative addition,⁶ its oxidative insertion into the C–C bond of biphenylene was demonstrated in two consecutive reports by the groups of Toste^7a and Bourissou,^7b respectively. The high energy barrier associated with the oxidation of gold could be overcome by the utilization of gold(i) precursors bearing ligands that exhibit either a strongly electron-donating character (e.g. IPr = [1,3-bis(2,6-diisopropylphenyl)imidazole-2-ylidene])^7a or small bite angles (e.g. DPCb = diphosphino-carborane).^7b,8 In line with these two approaches, more sophisticated bidentate (N^C)- and (P^N)-ligated gold(i) complexes have also been shown to aid the activation of biphenylene at ambient temperature (Scheme 1a).^7c,dOpen in a separate windowScheme 1(a) Previous reports on oxidative addition of ligated gold(i) precursors onto biphenylene. (b) This work: pyridine- and phosphine-directed C–C bond activation of biphenylene by commercially available gold(i) halides.In this context, we hypothesized that the oxidative insertion of gold(i) into the C–C bond of biphenylene could be facilitated by the presence of a neighboring chelating group.⁹ This approach would not only circumvent the need for gold(i) precursors featuring strong σ-donor or highly tailored bidentate ligands but also offer a de novo entry towards interesting, less explored ligand templates. However, recent work by Breher and co-workers showcased the difficulty of achieving such a transformation.¹⁰Herein, we report the oxidative insertion of readily available gold(i) halide precursors into the C–C bond of biphenylene. The appendage of both pyridine and phosphine donors in close proximity to the σ_C–C bond bridging the two aromatic rings provides additional stabilization to the metal center and results in a de novo entry to cyclometalated (N^C^C)- and (P^C)gold(iii) complexes (Scheme 1b).Our study commenced with the preparation of 5-chloro-1-pyridino-biphenylene system 2via Pd-catalyzed Suzuki cross coupling reaction between 2-bromo-3-methylpyridine and 2-(5-chlorobiphenylen-1-yl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane 1 (Scheme 2).¹¹ To our delight, the reaction of 2 with gold(i) iodide in toluene at 130 °C furnished complex κ³-(N^C^C)Au(iii)–I 3 in 60% yield.^12,13 Complex 3 was isolated as yellow plate-type crystals from the reaction mixture and its molecular structure was unambiguously assigned by NMR spectroscopy, high-resolution mass spectrometry (HR-MS) and crystallographic analysis. Complex 3 exhibits the expected square-planar geometry around the metal center, with a Au–I bond length of 2.6558(3) Å.¹⁴ The choice of a neutral weakly bound gold(i)-iodide precursor is key for a successful reaction outcome: similar reactions in the presence of [(NHC)AuCl + AgSbF₆] failed to deliver the desired biscyclometalation adducts, as reported by Breher et al. in ref. 10. The oxidative insertion of gold(i) iodide into the four-membered ring of pyridino-substituted biphenylene provides a novel and synthetically efficient entry to κ³-(N^C^C)gold(iii) halides. These species have recently found widespread application as precursors for the characterization of highly labile, catalytically relevant gold(iii) intermediates,^15a–d as well as for the preparation of highly efficient emitters in OLEDs.^15e–g Previous synthetic routes towards these attractive biscyclometalated gold(iii) systems involved microwave-assisted double C–H functionalization reactions that typically proceed with low to moderate yields.^15aOpen in a separate windowScheme 2Synthesis of complex 3via oxidative addition of Au(i) into the C–C bond of pyridine-substituted biphenylene. X-ray structures of complex 3 with atoms drawn using 50% probability ellipsoids. Hydrogen atoms have been omitted for clarity. Additional selected bond distances [Å]: N–Au = 2.126(2), C1–Au = 1.973(2), C2–Au = 2.025(2), Au–I = 2.6558(3) and bond angles [deg]: N–Au–I = 99.25(6), N–Au–C1 = 79.82(9), C1–Au–C2 = 81.2(1), C2–Au–I = 99.73(8). For experimental details, see ESI.^†Encouraged by the successful results obtained with the pyridine-substituted biphenylene and considering the prominent use of phosphines in gold chemistry,^6,16 we wondered whether the same reactivity would be observed for a P-containing system. To this end, both adamantyl- and tert-butyl-substituted phosphines were appended in C1 position of the biphenylene motif. Starting from 5-chlorobiphenylene-1-carbaldehyde 4, phosphine-substituted biphenylenes 5a and 5b could be accessed in 3 steps (aldehyde reduction to the corresponding alcohol, Appel reaction and nucleophilic displacement of the corresponding benzylic halide) in 64 and 57% overall yields, respectively.¹³ The reactions of 5a and 5b with commercially available gold(i) halides (Me₂SAuCl and AuI) furnished the corresponding mononuclear complexes 7a–b and 8a–b, respectively (Scheme 3).¹³ All these complexes were fully characterized and the structures of 7a, 7b and 8a were unambiguously characterized by X-ray diffraction analysis.¹³ Interestingly, the nature of the halide has a clear effect on the chemical shift of the phosphine ligand so that a Δδ of ca. 5 ppm can be observed in the ³¹P NMR spectra of 7a–b (Au–Cl) compared to 8a–b (Au–I), the latter being the more deshielded. The Au–X bond length is also impacted, with a longer Au–I distance (2.5608(1) Å for 8a) compared to that measured in the Au–Cl analogue (2.2941(7) Å for 7a) (Δd = 0.27 Å).¹³Open in a separate windowScheme 3Synthesis and reactivity of complexes 7a–b, 8a–b, 9 and 10. X-ray structure of complexes 11b, 12 and 14 with atoms drawn using 50% probability ellipsoids. Hydrogen atoms have been omitted for clarity. For experimental details and X-ray structures see ESI.^†Despite numerous attempts to promote the C–C activation in these complexes,^10,13 all reactions resulted in the formation of highly stable cationic species 11a–b and 12, which could be easily isolated from the reaction media. In the case of cationic mononuclear-gold(i) complexes 11, a ligand scrambling reaction in which the chloride ligand is replaced by a phosphine in the absence of a scavenger, a process previously described for gold(i) species, can be used to justify the reaction outcome.¹⁷ The formation of dinuclear gold complex 12 can be ascribed to the combination of a strong aurophilic interaction between the two gold centers (Au–Au = 2.8874(4) Å) and the stabilizing η²-coordination of the metal center to the aromatic ring of biphenylene. Similar η²-coordinated gold(i) complexes have been reported but, to the best of our knowledge, only as mononuclear species.¹⁸Taking into consideration the observed geometry of complexes 7a–b in the solid state,¹³ the facile formation of stable cationic species 11 and 12 and the lack of reactivity of the gold(i) iodides 8a–b, we hypothesized that the free rotation around the C–P bond was probably restricted, placing the gold(i) center away from the biphenylene system and thus preventing the desired oxidative insertion reaction. To overcome this problem, we set out to elongate the arm bearing the phosphine unit with an additional methylene group, introduced via a Wittig reaction from compound 4 to yield ligand 6, prepared in 4 steps in 27% overall yield. Coordination with Me₂SAuCl and AuI resulted in gold(i) complexes 9 and 10, respectively (Scheme 3). The structure of 9 was unambiguously assigned by X-ray diffraction analysis and a similar environment around the metal center to that determined for complex 7a was observed for this complex.¹³With complexes 9 and 10 in hand, we explored their reactivity towards C–C activation of the four-membered ring of biphenylene.¹⁹ After chloride abstraction and upon heating at 100 °C for 5 hours, ring opening of the biphenylene system was observed for complex 9. Interestingly, formation of mono-cyclometalated adduct 13 was exclusively observed (the structure of 13 was confirmed by ¹H, ¹³C, ³¹P, ¹⁹F, ¹¹B and 2D NMR spectroscopy and HR-MS).¹³ The solvent appears to play a major role in this process, as performing the reaction in non-chlorinated solvents resulted in stable cationic complexes similar to 11.^13,20,21 The presence of adventitious water is likely responsible for the formation of the monocyclometalated (P^C)gold(iii) complex 13 as when the reaction was carried out in C₂H₄Cl₂ previously treated with D₂O, the corresponding deuterated adduct 13-d could be detected in the reaction media. These results showcase the difficulties associated with the biscyclometalation for P-based complexes as well as the labile nature of the expected biscyclometalated adducts. Interestingly though, these processes can be seen as a de novo entry towards relatively underexplored (P^C)gold(iii) species.²²The C–C activation was further confirmed by X-ray diffraction analysis of the phosphonium salt 14, which arise from the reductive elimination at the gold(iii) center in 13 upon exchange of the BF₄⁻ counter-anion with the weakly coordinating sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (NaBAr^F).^13,23 The phosphorus atom is four-coordinate, with weak bonding observed to the distant counter-anion and a distorted tetrahedral geometry (C1–P–C2 = 95.05(17), C2–P–C3 = 112.1(1), C3–P–C4 = 116.6(1), C4–P–C1 = 107.4(2) deg). These results represent the third example in which the C(sp²)–P bond reductive elimination at gold(iii) has been reported.²⁴Further, it is important to note that, in contrast to the reactivity observed for the pyridine-substituted biphenylene, neither P-coordinated gold(i) iodo complexes 8a, 8b nor 10 reacted to give cyclometalated products despite prolonged heating, which highlights the need for highly reactive cationized gold(i) species to undergo oxidative addition when phosphine ligands are flanking the C–C bond.¹³To get a deeper understanding on the observed differences in reactivity for the N- vs. P-based directing groups, ground- and transition-state structures for the oxidative insertion of gold(i) halides in C1-substituted biphenylenes were computed by DFT calculations. The reactions of Py-substituted 2 with AuI to give 3 (I) and those of P-substituted 7a (II) and 9 (III) featuring the cationization of the gold(i) species were chosen as models for comparative purposes with the experimental conditions (Fig. 1 and S1–S10 in the ESI^†).^25–27 The computed activation energies for the three processes are in good agreement with the experimental data. The pyridine-substituted biphenylene I exhibits the lowest activation barrier for the oxidative insertion process (ΔG^‡ = 34.4 kcal mol⁻¹). The reaction on the phosphine-substituted derivatives II and III proved to be, after cationization of the corresponding gold(i) halide complexes (II-BF₄, III-BF₄) higher in energy (ΔG^‡ = 39.6 and 46.3 kcal mol⁻¹ respectively), although the obtained values do not rule out the feasibility of the C–C activation process. The transition state between I and I′ exhibits several interesting geometrical features: (a) the biphenylene is significantly bent, (b) the cleavage of the C–C bond is well advanced (d_C–C = 1.898 Å in TSIvs. d_C–C = 1.504 Å in I), and (c) the two C and the I atoms form a Y-shape around gold with minimal coordination from the pyridine (d_N–Au = 2.742 Å in TSIvs. d_N–Au = 2.093 Å in I and 2.157 Å in I′, respectively). The transition-state structures found for the P-based ligands (TSII and TSIII) also show an elongation of the C–C bond and display a bent biphenylene. However, much shorter P–Au distances (d_P–Au = 2.330 Å for TSII and 2.314 Å for TSIII) can be observed compared to the pyridine-based system, as expected due to the steric and electronic differences between these two coordinating groups. Analogously, longer C–Au distances were also found for the P-based systems (d_C1–Au = 2.152 Å for TSIvs. 2.235 Å and 2.204 Å for TSII and TSIII; d_C2–Au = 2.143 Å for TSIvs. 2.219 Å and 2.162 Å for TSII and TSIII), with a larger deviation of square planarity for Au in TSIII compared to TSII.^28,29 These results suggest that, provided the appropriate distance to the C–C bond is in place, the strong coordination of phosphorous to the gold(i) center does not prevent the C–C activation of biphenylene but other reactions (i.e. formation of diphosphine gold(i) cationic species, protodemetalation) can outcompete the expected biscyclometalation process. In contrast, a weaker donor such as pyridine offers a suitable balance bringing the gold in close proximity to the C–C bond and enables both the oxidative cleavage as well as the formation of the double metalation product.Open in a separate windowFig. 1Energy profile (ΔG and ΔG^‡ in kcal mol⁻¹), optimized structures, transition states computed at the IEFPCM (toluene/1,2-dichloroethane)-B3PW91/DEF2QZVPP(Au,I)/6-31++G(d,p)(other atoms) level of theory for the C–C activation of biphenylene with gold(i) iodide from I and gold(i) cationic from II and III. Computed structures of the transition states (TSI, TSII and TSIII) and table summarizing relevant distances.     

Luminescence switch-on detection of protein tyrosine kinase-7 using a G-quadruplex-selective probe

A series of luminescent iridium(iii) complexes were synthesised and evaluated for their ability to act as luminescent G-quadruplex-selective probes. The iridium(iii) complex 9 [Ir(pbi)₂(5,5-dmbpy)]PF₆ (where pbi = 2-phenyl-1H-benzo[d]imidazole; 5,5-dmbpy = 5,5′-dimethyl-2,2′-bipyridine) exhibited high luminescence for G-quadruplex DNA compared to dsDNA and ssDNA, and was employed to construct a G-quadruplex-based assay for protein tyrosine kinase-7 (PTK7) in aqueous solution. PTK7 is an important biomarker for a range of leukemias and solid tumors. In the presence of PTK7, the specific binding of the sgc8 aptamer sequence triggers a structural transition and releases the G-quadruplex-forming sequence. The formation of the nascent G-quadruplex structure is then detected by the G-quadruplex-selective iridium(iii) complex with an enhanced luminescent response. Moreover, the application of the assay for detecting PTK7 in cellular debris and membrane protein extract was demonstrated. To our knowledge, this is the first G-quadruplex-based assay for PTK7.