Poly(methyl methacrylate) copolymers containing multiple,pendent plasticizing groups

New ether dimer (ED‐Eh) and diester (EHDE) derivatives of α‐(hydroxymethyl)acrylate, each having two 2‐ethylhexyl side chains, and an amine‐linked di(2‐ethylhexyl)acrylate (AL‐Eh), having three 2‐ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, T_g. The free radical polymerizations of these monomers yielded high‐molecular–weight polymers. Cyclopolymer formation of ED‐Eh and AL‐Eh was confirmed by ¹³C NMR analysis and the cyclization efficiencies were found to be very high (～100%). Copolymers of ED‐Eh, EHDE, and AL‐Eh with methyl methacrylate (MMA) showed significant T_g decreases over poly(methyl methacrylate) (PMMA) due to 2‐ethylhexyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of 2‐ethylhexyl methacrylate, ED‐Eh, EHDE, and AL‐Eh with MMA revealed that the impacts of these monomers on depression of T_g's are identical with respect to the total concentration of the pendent groups. This is consistent with an earlier study involving copolymers of monomers comprising one and two octadecyl side groups with MMA. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the 2‐ethylhexyl pendent groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2302–2310, 2010     

Polysoaps in Backbone‐Selective Solvents: Effects of Side‐Chain Length on Collapse Dynamics

Abstract

Molecular dynamics (MD) simulations of model comb‐graft heteropolymers were performed to understand general mechanistic features of coil‐to‐micelle relaxation after instantaneous quench from a nonselective solvent to solvent conditions selective for the backbone monomers and poor for the side‐chain monomers. The systems considered were single bead‐spring molecules with backbones of 30 monomers and 10 equally spaced side chains of 1, 5, 10, or 20 monomers each, immersed in dense liquids of 20,000 simple solvent particles. We find that the coil‐to‐micelle relaxation time, τ _r , averaged over 50 independent trajectories for each set of topological parameters considered, decreases with increasing side‐chain length. A two‐stage relaxation mechanism is observed: (1) a fast collapse and aggregation of neighboring side chains to form a chain of “protomicelles,” followed by (2) a slow intramolecular aggregation of protomicelles. Fast collapse dominates for molecules with relatively longer side chains due to relatively higher probabilities of initial contacts between side‐chain monomers in different side chains, while slow intramolecular aggregation dominates for molecules with relatively shorter side chains.     

Design and synthesis of triptycene based fluorescent polymer with pendent triazole: Effect of functionality on host–guest interaction

Fluorescent materials have emerged as one of the promising candidates for chemical sensing due to their high sensitivity towards analytes that are relatively electron deficient such as nitroaromatics (NACs). Herein, four new 1,2,3‐triazole functionalized dibromo monomers ( 2‐5 ) have been synthesized. These dibromo monomers ( 2‐5 ) have been subsequently polymerized with 2,6‐diethynyltriptycene ( DET ) to yield four new ethynyl linked polymers ( P2‐P5 ) with 1,2,3‐triazole pendent. These polymers are organosoluble, amorphous in nature and have high thermal stability [T_d > 289 °C and high char yield (>73%) at 800 °C]. Interestingly these new polymers ( P2‐P5 ) are highly fluorescent in solution (Φ = 0.37–0.43 in DCM) relative to the polymer ( P1 ) that does not have the 1,2,3‐triazole motif as a pendent. The host–guest interaction between these polymers ( P1‐P5 ) and electron deficient molecules (PA and C₆₀) has been investigated. The Stern–Volmer quenching constant (K_SV) data suggest that the interaction of picric acid and polymers increases significantly in presence of 1,2,3‐triazole linked pendent group whereas in case of C₆₀, the K_SV value decrease considerably in presence of 1,2,3‐triazole linked pendent. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3725–3735     

ipso‐Arylative Ring‐Opening Polymerization as a Route to Electron‐Deficient Conjugated Polymers

ipso‐Arylative ring‐opening polymerization of 2‐bromo‐8‐aryl‐8H‐indeno[2,1‐b]thiophen‐8‐ol monomers proceeds to M_n up to 9 kg mol^?1 with conversion of the monomer diarylcarbinol groups to pendent conjugated aroylphenyl side chains (2‐benzoylphenyl or 2‐(4‐hexylbenzoyl)phenyl), which influence the optical and electronic properties of the resulting polythiophenes. Poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to have lower frontier orbital energy levels (HOMO/LUMO=?5.9/?4.0 eV) than poly(3‐hexylthiophene) owing to the electron‐withdrawing ability of the aryl ketone side chains. The electron mobility (ca. 2×10^?3 cm² V^?1 s^?1) for poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to be significantly higher than the hole mobility (ca. 8×10^?6 cm² V^?1 s^?1), which suggests such polymers are candidates for n‐type organic semiconductors. Density functional theory calculations suggest that backbone distortion resulting from side‐chain steric interactions could be a key factor influencing charge mobilities.     

Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Synthesis of ladder‐like polynorbornenes with n‐type perylenendiimide derivatives as bridges

Polymerizable tetrachloro‐perylenediimdes containing endo/exo‐norbornene groups on both imide sides were designed and synthesized. Endo/Exo‐type soluble ladder‐like polynorbornenes with perylenediimide (PDI) as bridges were prepared by ring‐opening metathesis polymerization (ROMP). XRD characterizations showed that the ladder‐like polynorbornenes had ordered structures similar to the supramolecular precursors assembled from the corresponding monomers. TGA measurements demonstrated great thermal stabilities for the both target P1‐Endo and P2‐Exo with T_d of about 320 °C at 5 wt % loss, respectively, which is important for further application in devices. Both polymers have good solubility in common organic solvents and easy to form thin films. Photophysical studies and cyclic voltammetry investigations reveal that polynorbornene films have wide‐range absorption from 400 nm to 600 nm and the HOMO/LUMO energy levels could be matched well with the donor‐PCzTh‐TVDCN. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of norbornenes containing cationic mono‐ and di(cyclopentadienyliron)arene complexes and their ring‐opening metathesis polymerization

A number of classes of polynorbornenes containing cationic iron moieties within their side chains were prepared via ring‐opening metathesis polymerization with a ruthenium‐based catalyst. The iron‐containing polymers displayed excellent solubility in polar organic solvents. The weight‐average molecular weights of these polymeric materials were estimated to be in the range of 18,000–48,000. Thermogravimetric analysis of these polymers showed two distinct weight losses. The first weight loss was in the range of 204–260 °C and was due to the loss of the metallic moieties, whereas the second weight loss was observed at 368–512 °C and was due to the degradation of the polymer backbone. Cyclic voltammetry studies of the iron‐containing polymers showed that the 18 e^? cationic iron centers underwent a reduction to give the neutral 19 e^? complexes at half‐wave potential (E_1/2) = ?1.105 V. Photolysis of the metallated polymers led to the isolation of the norbornene polymers in very good yields. Differential scanning calorimetry studies showed a sharp increase in the glass‐transition temperatures up to 91 °C when rigid aromatic side chains were incorporated into the norbornene polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3053–3070, 2006     

The linear rheological responses of wedge‐type polymers

The linear rheological responses of a series of specially designed wedge‐type polymers synthesized by the polymerization of large molecular weight monomers have been measured. These wedge polymers contained large side groups which contained three flexible branch chains per polymer chain unit. The master curves for these polymers were obtained by time temperature superposition of dynamic data at different temperatures from the terminal flow regime to well below the glass transition temperature, T_g. While these polymers maintained a behavior similar to that of linear polymers, the influence of the large side group structure lead to low entanglement densities and extremely low rubbery plateau modulus values, being near to 13 kPa. The viscosity molecular weight dependence was also somewhat higher than that normally observed for linear polymers, tending toward a power law near to 4.2 rather than the typical 3.4 found in entangled linear chains. The glassy modulus of these branched polymers is also found to be extremely low, being less than 100 MPa at T_g ?60 °C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 899–906     

Preparation of aromatic polyimides highly soluble in conventional solvents

Several highly soluble polyimides were synthesized from various aromatic tetracarboxylic dianhydrides and an aromatic diamine containing tert‐butyl pendent groups [4,4′‐methylenebis(2‐tert‐butylaniline)]. All the polyimides showed excellent solubility in common solvents such as chloroform, tetrahydrofuran, and dioxane at room temperature. The number‐average molecular weight ranged from 3.6 × 10⁴ to 1.3 × 10⁵ according to gel permeation chromatography relative to a polystyrene standard, and the polydispersity index was between 1.9 and 2.5. The glass‐transition temperatures of the resulting polyimides ranged from 213 to 325 °C, as measured by differential scanning calorimetry, and little weight loss was observed up to 450 °C in N₂ by thermogravimetric analysis. These experimental data indicated that the tert‐butyl pendent groups reduced the interactions among polymer chains to improve their solubility in organic solvents without the loss of thermal stability. Transparent and flexible films of these polyimides were obtained via casting from solution. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 229–234, 2002     

Synthesis of iron-containing polymers with azo dyes in the backbones or side chains

The synthesis of cationic cyclopentadienyliron-containing polymers with pendent azobenzene chromophores was accomplished via metal-mediated nucleophilic aromatic substitution reactions. All of the desired polymers were isolated as vibrantly coloured materials and displayed excellent solubility in polar aprotic solvents. Cationic and neutral cyclopentadienyliron polymers incorporating azo dyes in the backbone were also prepared. Reactions of azo dyes with dichlorobenzene complexes allowed for the isolation of cationic cyclopentdienyliron (CpFe₊) complexes with azo dye chromophores. These complexes were then reacted with 1,1′-ferrocenedicarbonyl chloride to produce the trimetallic monomers with terminal chloro groups. These monomers contained two pendent CpFe₊ cations and a neutral iron moiety in the backbone. Nucleophilic substitution reactions of these monomers with oxygen and sulfur containing dinucleophiles gave rise to a new class of polymeric materials. The pendent CpFe₊ moieties could also be cleaved from the polymer backbones using photolysis to afford novel ferrocene based polymers. The UV-vis spectra of the organoiron monomers and polymers display similar wavelength maxima however incorporating azobenzene chromophores with electron-withdrawing substituent into the polymer chains resulted in bathochromic shifts of the λ_max values.     

Thermoresponsive brush copolymers with poly(propylene oxide‐ran‐ethylene oxide) side chains via metal‐free anionic polymerization “grafting from” technique

Thermoresponsive brush copolymers with poly(propylene oxide‐ran‐ethylene oxide) side chains were synthesized via a “grafting from” technique. Poly(p‐hydroxystyrene) was used as the backbone, and the brush copolymers were prepared by random copolymerization of mixtures of oxyalkylene monomers, using metal‐free anionic ring‐opening polymerization, with the phosphazene base (t‐BuP₄) being the polymerization promoter. By controlling the monomer feed ratios in the graft copolymerization, two samples with the same side‐chain length and different compositions were prepared, both of which possessed high molecular weights and low molecular weight distributions. The results from light scattering and fluorescence spectroscopy indicated that the brush copolymers in their dilute aqueous solutions were near completely solvated at low temperature and underwent slight intramolecular chain contraction/association and much more profound intermolecular aggregation at different stages of the step‐by‐step heating process. Above 50 °C, very turbid solutions, followed by macrophase separation, were observed for both of the samples, which implied that it was difficult for the brush copolymers to form stable nanoscopic aggregates at high temperature. All these observations were attributed, at least partly, to the distribution of the oxyalkylene monomers along the side chains and the overall brush‐like molecular architecture. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2320–2328, 2010     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Ring‐opening metathesis polymerization of new norbornene‐based monomers containing various chromophores

Pure exo‐functional norbornene monomers containing various chromophores such as fluorene, pyrene, and carbazole were successfully prepared via the Diels–Alder reaction and condensation reaction. The living ring‐opening metathesis polymerization (ROMP) of a fluorene‐containing monomer, exo‐2‐(fluorene‐9‐ylcarboxymethyl)norborn‐5‐ene (exo‐1), was observed and confirmed by the formation of a diblock copolymer and a linear relationship between the number‐average molecular weight and [M]/[I] ratios ([M] = monomer concentration; [I] = initiator concentration). The synthesis and characteristics of novel fluorene‐containing polymers based on pure exo‐1 are reported with Grubbs catalyst I {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂} with a high molecular weight of 3.18 × 10⁴ in 90 s ([M]/[I] = 100). However, the ROMP of pyrene‐ and carbazole‐containing monomers [exo‐5‐(pyrene methoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene and exo‐5‐(carbazole ethoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene, respectively] were carried out in a nonliving fashion. All the chromophore‐containing polymers showed excellent solubility in various organic solvents, particularly in chloroform, N‐methyl‐2‐pyrrolidinone, and 1,2‐dichlorobenzene. The glass transition temperatures of polynorbornenes containing various chromophores were determined to be 80–109 °C (by differential scanning calorimetry) higher than that of ring‐opened polynorbornene (glass transition temperature = 35 °C), indicating that the incorporation of the pendant aromatic moieties (e.g., fluorene, pyrene, and carbazole) could enhance the transition temperature for segmental motions of polymer chains. The photoluminescence spectra of all polymer solutions showed a strong emission in the blue region of the visible spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3022–3031, 2007     

Modular In Situ Functionalization Strategy: Multicomponent Polymerization by Palladium/Norbornene Cooperative Catalysis

Herein, we report a cooperatively palladium/norbornene‐catalyzed polymerization, which simplifies the synthesis of functional aromatic polymers, including conjugated polymers. Specifically, an A₂B₂C‐type multicomponent polymerization that is based on an ortho amination/ipso alkynylation reaction was developed for the preparation of various amine‐functionalized arylacetylene‐containing polymers. Within a single catalytic cycle, the amine side chains are site‐selectively installed in situ by C?H activation during the polymerization process, which represents a major difference from conventional cross‐coupling polymerizations. This “in situ functionalization” strategy enables the modular incorporation of functional side chains starting from simple monomers, thereby conveniently affording a diverse range of functional polymers.     

Novel active ester‐bridged copolynorbornene materials containing terminal functional hydroxyl,amino, methacryloyl,or ammonium groups via ring‐opening metathesis polymerization

Several random and block copolynorbornenes with side chains containing terminal hydroxyl, amino, methacryloyl or ammonium groups were derived from the functional alkyl ester‐containing norbornenes by ring‐opening metathesis polymerization (ROMP). The main chain of ROMP‐type polynorbornene had a more important role for glass‐transition temperature in comparison with vinyl addition polymerization. There is little effect on glass‐transition temperature (about ?39 °C) of polynorbornenes with different length of alkyl side chain. The organosoluble copolynorbornenes with active crosslinkable methylacryloyl side chains derived from functional hydroxyl group were prepared to improve the thermal stability of poly(methyl methacrylate) [decomposition temperature (T_d)^10% = 325 °C in nitrogen] by forming networked AB crosslinked polymer (T = 367 °C in nitrogen). The sizes of nanometer‐scale polymeric micelles of block copolymers having hydrophobic alkyl ester and hydrophilic ammonium groups were measured in the range of 11–25 nm by scanning electron microscopy. These polymeric materials with various functional groups or amphiphilic architectures are accessible by ROMP, whose topology makes them particularly attractive for application potential such as biomedical and photoelectric materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4233–4247, 2005     

Supramolecular aggregation in three 4‐aryl‐6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

Both 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methylphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile and 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methoxyphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile crystallize from dimethylformamide solutions as stoichiometric 1:1 solvates, viz. C₂₉H₂₁N₅·C₃H₇NO, (I), and C₂₉H₂₁N₅O·C₃H₇NO, (II), respectively; however, 6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐4‐(3,4,5‐trimethoxyphenyl)‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile, C₃₁H₂₅N₅O₃, (III), crystallizes in the unsolvated form. The heterocyclic components of (I) are linked by C—H...π(arene) hydrogen bonds to form cyclic centrosymmetric dimers, from which the solvent molecules are pendent, linked by N—H...O hydrogen bonds. In (II), the heterocyclic components are linked by a combination of C—H...N and C—H...π(arene) hydrogen bonds into chains containing two types of centrosymmetric ring, and the pendent solvent molecules are linked to these chains by N—H...O hydrogen bonds. Molecules of (III) are linked into simple C(12) chains by an N—H...O hydrogen bond, and these chains are weakly linked into pairs by an aromatic π–π stacking interaction.     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization and liquid crystal‐aligning properties of new poly{3‐[4‐(n‐alkyloxy)phenyloxy]pyromellitimide}s

Four new polypyromellitimides (MC_m‐PPIs and MC_m‐OPIs, m = 6, 8) that are singly substituted with a flexible n‐alkyloxy side branch at the pyromellitimide ring were prepared by the two‐step polycondensation of 3‐[4‐(n‐alkyloxy)phenyloxy]pyromellitic dianhydrides (MC_m‐PMDAs, m = 6, 8) with p‐phenylenediamine (PDA) and 4,4′‐oxydianiline (ODA), respectively. The dianhydride monomers were synthesized from durene via several reaction steps. Inherent viscosities of the precursor poly(amic acid)s ranged from 0.57 to 1.58 dl/g. After chemical structures of the polyimides had been characterized, their thermal properties, crystalline structures, and liquid crystal (LC) aligning abilities on their rubbed thin films were determined and discussed in comparison to the polypyromellitimides that are doubly substituted at the pyromellitimide ring with the same side branches. For all polymers thermogravimetric analysis (TGA) programs showed a typical two‐step degradation behavior with onset temperatures in the 430–455°C range. In X‐ray scattering studies all the samples were found to be amorphous, but the presence of a loosely developed layer structure could be confirmed, in which two main chains gather together to form a double‐strand backbone layer and n‐alkyl branches fill the space between the layers. On the rubbed surfaces of the polyimide thin films LCs uniformly aligned parallel to the rubbing direction with the pre‐tilt angles 5–7° in MC_m‐OPIs and 18–32° in MC_m‐PPIs. Copyright © 2006 John Wiley & Sons, Ltd.     

Side‐Chain Engineering of Benzodithiophene‐Fluorinated Quinoxaline Low‐Band‐Gap Co‐polymers for High‐Performance Polymer Solar Cells

A new series of donor–acceptor co‐polymers based on benzodithiophene and quinoxaline with various side chains have been developed for polymer solar cells. The effect of the degree of branching and dimensionality of the side chains were systematically investigated on the thermal stability, optical absorption, energy levels, molecular packing, and photovoltaic performance of the resulting co‐polymers. The results indicated that the linear and 2D conjugated side chains improved the thermal stabilities and optical absorptions. The introduction of alkylthienyl side chains could efficiently lower the energy levels compared with the alkoxyl‐substituted analogues, and the branched alkoxyl side chains could deepen the HOMO levels relative to the linear alkoxyl chains. The branched alkoxyl groups induced better lamellar‐like ordering, but poorer face‐to‐face packing behavior. The 2D conjugated side chains had a negative influence on the crystalline properties of the co‐polymers. The performance of the devices indicated that the branched alkoxyl side chains improved the V_oc, but decreased the J_sc and fill factor (FF). However, the 2D conjugated side chains would increase the V_oc, J_sc, and FF simultaneously. For the first time, our work provides insight into molecular design strategies through side‐chain engineering to achieve efficient polymer solar cells by considering both the degree of branching and dimensionality.     

Synthesis and characterization of achiral banana‐shaped liquid crystalline molecules containing bisnaphthyl moieties

Three analogous series of symmetric banana‐shaped liquid crystalline molecules containing bisnaphthyl units were synthesized and characterized. The effects of linking groups (on the side wings) and lateral meta‐fluoro substitutions (on the middle outer rings) on the mesogenic properties were examined. The type of mesophase depends on the lengths of terminal alkoxy chains. Thus, achiral molecules with shorter flexible chains (n = 8) exhibit a rectangular columnar (B₁) phase, while analogous derivatives with longer flexible chains (n = 12) display the B₂ phase. All lateral meta‐fluoro substituted analogues (series II) possess the lowest isotropization temperatures and the narrowest mesophasic ranges of the B₁ and B₂ phases. The B₁ and B₂ phases were confirmed by X‐ray diffraction, polarizing optical microscopy (POM) and electro‐optical (EO) switching experiments. An electric field‐induced transition from an antiferroelectric (tristable) state to a ferroelectric (bistable) state was observed in the EO measurements. Spontaneous polarization (by switching current response), tilt angle of chiral domains (by POM), and transmittance–voltage measurements of the B₂ phase in related compounds have been surveyed in this study.