The role of quality management system in the monitoring and continuous improvement of GMP-regulated short-lived radiopharmaceutical manufacture

The last decade has seen extraordinary growth in the clinical use of Positron Emission Tomography (PET), an in vivo molecular imaging modality widely used in oncology that requires the use of radiopharmaceuticals labeled with short-lived radionuclides. These medicinal products have found widespread application in Nuclear Medicine departments equipped with PET scanners. Due to the great increase in radiopharmaceutical demand, their production has been centralized and moved to industrial manufacturing sites in which Good Manufacturing Practice (GMP) principles and guidelines for medicinal products are to be applied. The production of PET radiopharmaceuticals features particular aspects such as the use of the lot before the completion of all tests, the multiplicity of batches produced per single day and the absence of product stock due to radionuclide short half-life. In this context, the application of quality principles to all stages of the process and the implementation of a quality management system (QMS) are of primary importance. This paper reports on the development of a QMS applied to a GMP manufacturing site of an in vivo PET diagnostic product, and on how its application can describe the performance of the site. Data were collected over a 6-year period (2008–2013) and demonstrate the ability of Key Performance Indicators, strictly related to the structure and organization of the QMS, and quality tools (data analysis, internal audit, etc.) to monitor process performance in terms of effectiveness, efficacy and stability.     

Implementation of a quality assurance system according to GMP and ISO 9001:2008 standard for radiopharmaceutical production in a public research centre

The production of pharmaceuticals is one of the most highly regulated fields in terms of quality. The body of good manufacturing practice (GMP) represents the standard required by law; GMP embraces the guidelines that regulate all activities related to the production and quality control of medicinal products for human and veterinary use. This paper deals with the implementation of a quality management system (QMS) in compliance with GMP and ISO 9001 standards for the production and distribution of radiopharmaceuticals in a public research institute. The production of 2-[18F]fluoro-2-deoxy-d-glucose has been implemented according to GMP standards and has been licensed by the national Authority in 2007. In 2010, a project to orient the system??s GMP compliance to ISO 9001 standards has been approved. A QMS conforming to ISO 9001:2008 should be considered an important additional step in terms of quality, because ISO 9001 also takes into account economic and financial aspects, design and development aspects and introduces management review for measurement and analysis of the process with the aim of improving performances. The harmonization between GMP and ISO has been defined following the Pharmaceutical Quality System Q10 guideline developed by International Conference on Harmonization.     

Application of ISO 13528 robust statistical method for external quality assessment of blood glucose measurements in China

External quality assessment (EQA) including extensive participants often result in abnormal distribution. Robust statistical methods are insensitive to slight deviation for a given probability model and can estimate the population parameters utilizing robust algorithm. The aim of this study was to evaluate the blood glucose testing performance of EQA in China using ISO 13528 robust statistical method. A total of 4571 participants measured two lots of materials at different concentrations and submitted the results through the Clinet-EQA reporting system V1.5. Data were collected and analyzed by Clinet-EQA evaluating system and SPSS 13.0. Participants were classified by method principles they adopted. Acceptability of relative differences between each result and robust mean of the group was calculated using biological variation desirable quality specification for allowable total error. The kernel density plots and Youden Plot were also applied to show the distribution of z-scores. The robust means of the two lots were 6.31 mmol/L and 15.71 mmol/L, and the robust standard deviations were 0.23 mmol/L and 0.5 mmol/L, respectively. Acceptability of relative differences was more than 90 % among all groups. About 91.5% and 89.7 % of the participants out of the two lots fulfilled the condition of |z| ≤ 2. In addition, 87.2 % participants fell inside the confidence ellipse for probability levels of 95 % in Youden Plot. According to the statistical results, we can conclude that most participants are qualified for performing blood glucose test and ISO 13528 robust statistical method is appropriate for EQA result analysis.     

Analysis of Vinyl Chloride in Vapor Phase of Mainstream Cigarette Smoke by GC–MS Under ISO and Health Canada Intensive Machine Smoking Regimens

Vinyl chloride (VC) in the vapor phase of mainstream cigarette smoke was determined under both International Organization for Standardization (ISO) and Health Canada intensive (HCI) machine smoking regimens, which was suspected to be carcinogenic compound. VC was collected by passing the mainstream cigarette smoke through a Cambridge Filter Pad (CFP) into cryogenic traps containing methanol. The impinger solutions were fortified with VC-d ₃ and analyzed by GC–MS. Limits of detection for vinyl chloride was 0.9 ng mL^?1 with the recovery in the range of 93.2–98.4 %. Moreover, the intra-day and inter-day precision was 7.39 and 9.77 %, respectively. Under HCI machine smoking regimen, the vinyl chloride yields in vapor phase of mainstream cigarette smoke were much higher and the average increase was greater than 100 % compared with those under ISO smoking condition.     

A process approach to ISO/IEC 17025 in the implementation of a quality management system in testing laboratories

The introduction of quality management systems (QMS) and the accreditation of laboratories according to ISO/IEC 17025 standard are not easy tasks, mainly for those laboratories located at teaching and research institutions. During the implementation of QMS at two testing laboratories of the Federal University of Rio Grande do Sul in Brazil, new solutions to overcome some of the difficulties inherent to this type of environment have been found. The knowledge acquired through this work has led to the proposition of some general steps incorporating a process approach presented in this article, which could be of use to laboratories in their pursuit for accreditation. This proposal suggests the use of strategic planning information, links the QMS objectives to the corresponding processes and sets a few indicators to monitor both performance of and improvements to the system.     

The effect of the addition of polypropylene-grafted SiO2 nanoparticle on the thermal conductivity of isotactic polypropylene

The thermal conductivity of Isotactic polypropylene (iPP)/silica particle (SiO₂, 26 nm) nanocomposite has been investigated. The untreated SiO₂ and iPP grafted onto SiO₂ were dispersed in the iPP (M _w = 2.5 × 10⁵) matrix. The molecular mass of the iPP-grafted chain, M _n, was precisely controlled to be 5.8 × 10³, 1.2 × 10⁴, and 4.6 × 10⁴. It was found that the thermal conductivities of graft-treated nanocomposites were higher than that of untreated SiO₂ composites. This implied that it is possible to achieve even higher thermal conductivity using the graft treatment. A thermal conductivity analysis conducted using a three-phase model, with considerations for thermal conductivity at interfacial layers, showed that the thermal conductivity of the interfacial layer increased significantly when a graft chain was incorporated. Moreover, the thermal conductivity per graft chain was proportional to the 1/2 power of the molecular mass ( \( M_{\text{n}}^{0.5} \) ). The results strongly suggest that the thermal conductivity pathway of interfacial layer was the main chain direction of iPP-grafted molecular chains.     

Experimental Investigation of the 2D Ion Beam Profile Generated by an ESI Octopole-QMS System

In this paper, we have employed an ion imaging approach to investigate the behavior of ions exiting from a quadrupole mass spectrometer (QMS) system that employs a radio frequency octopole ion guide before the QMS. An in-vacuum active pixel detector (Timepix) is employed at the exit of the QMS to image the ion patterns. The detector assembly simultaneously records the ion impact position and number of ions per pixel in every measurement frame. The transmission characteristics of the ion beam exiting the QMS are studied using this imaging detector under different operating conditions. Experimental results confirm that the ion spatial distribution exiting the QMS is heavily influenced by ion injection conditions. Furthermore, ion images from Timepix measurements of protein standards demonstrate the capability to enhance the quality of the mass spectral information and provide a detailed insight in the spatial distribution of different charge states (and hence different m/z) ions exiting the QMS.      

Rapid detection of pesticides not amenable to multi-residue methods by flow injection–tandem mass spectrometry

Flow injection combined with tandem mass spectrometry (MS/MS) was investigated for the rapid detection of highly polar pesticides that are not amenable to multi-residue methods because they do not partition into organic solvents and require dedicated chromatographic conditions. The pesticides included in this study were amitrole, chlormequat, cyromazine, daminozide, diquat, ethephon, fosetyl-Al, glufosinate, glyphosate and its metabolite aminomethylphosphonic acid, maleic hydrazide, mepiquat and paraquat. The composition of the flow-injection solvent was optimized to achieve maximum MS/MS sensitivity. Instrumental limits of detection varied between <0.05 and 1 pg. Fruit, vegetable, cereal, milk and kidney samples were extracted with water (1 % formic acid in case of paraquat/diquat) and ten times diluted in either methanol/0.1 % formic acid, methanol/0.1 % ammonia or acetonitrile/0.1 % ammonia, depending on the pesticide. The ion suppression observed depended strongly on both the matrix and the pesticide. This could be largely compensated for by matrix-matched calibration, but more accurate quantification was obtained by using isotopically labelled standards (commercially available for most of the pesticides studied). The method detection limits ranged from 0.02 mg/kg for chlormequat and mepiquat to 2 mg/kg for maleic hydrazide and were 0.05–0.2 mg/kg for most other pesticide/matrix combinations. This was sufficiently low to test compliance with EU maximum residue limits for many relevant pesticide/commodity combinations. The method substantially reduces the liquid chromatography–MS/MS capacity demand which for many laboratories is prohibitive for inclusion of these pesticides in their monitoring and surveillance programmes. Figure

?     

Laser diode thermal desorption atmospheric pressure chemical ionization tandem mass spectrometry applied for the ultra-fast quantitative analysis of BKM120 in human plasma

A sensitive and ultra-fast method utilizing the laser diode thermal desorption ion source using atmospheric pressure chemical ionization coupled to tandem mass spectrometry (LDTD-APCI-MS/MS) was developed for the quantitative analysis of BKM120, an investigational anticancer drug in human plasma. Samples originating from protein precipitation (PP) followed by salting-out assisted liquid-liquid extraction (SALLE) were spotted onto the LazWell? plate prior to their thermal desorption and detection by tandem mass spectrometry in positive mode. The validated method described in this paper presents a high absolute extraction recovery (>90 %) for BKM120 and its internal standard (ISTD) [D₈]BKM120, with precision and accuracy meeting the acceptance criteria. Standard curves were linear over the range of 5.00 to 2000 ng mL^?1 with a coefficient of determination (R ²) >0.995. The method specificity was demonstrated in six different batches of human plasma. Intra- and inter-run precision as well as accuracy within ±20 % at the lower limit of quantification (LLOQ) and ±15 % (other levels) were achieved during a three-run validation for quality control (QC) samples. The post-preparative stability on the LazWell? plate at room temperature was 72 h and a 200-fold dilution of spiked samples was demonstrated. The method was applied successfully to three clinical studies (n?=?847) and cross-checked with the validated LC-ESI-MS/MS reference method. The sample analysis run time was 10 s as compared to 4.5 min for the current validated LC-ESI-MS/MS method. The resultant data were in agreement with the results obtained using the validated reference LC-ESI-MS/MS assay and the same pharmacokinetic (PK) parameters were calculated for both analytical assays. This work demonstrates that LDTD-APCI-MS/MS is a reliable method for the ultra-fast quantitative analysis of BKM120 which can be used to speed-up and support its bioanalysis in the frame of the clinical trials.     

Stereoselective separation and pharmacokinetic dissipation of the chiral neonicotinoid sulfoxaflor in soil by ultraperformance convergence chromatography/tandem mass spectrometry

Ultraperformance convergence chromatography/tandem triple quadrupole mass spectrometry (UPC²-MS/MS) is a novel tool in separation science that combines the advantages of supercritical fluid chromatography with ultraperformance liquid chromatography/MS/MS technology. The use of nontoxic CO₂ fluid and a postcolumn additive to complement MS/MS allows better control of analyte retention for chiral separation and high-sensitivity determination with different chiral stationary phases. This paper reports the stereoselective separation and determination of the chiral neonicotinoid sulfoxaflor in vegetables and soil by UPC²-MS/MS. Baseline resolution (Rs?≥?1.56) of and high selectivity (LOQ?≤?1.83 μg/kg) for the four stereoisomers were achieved by postcolumn addition of 1 % formic acid–methanol to a Chiralpak IA-3 using CO₂/isopropanol/acetonitrile as the mobile phase at 40 °C, 2,500 psi, and for 6.5 min in electrospray ionization positive mode. Rearranged Van’t Hoff equations afforded the thermodynamic parameters ΔH ^ο and ΔS ^ο, which were analyzed to promote understanding of the enthalpy-driven separation of sulfoxaflor stereoisomers. The interday mean recovery, intraday repeatability, and interday reproducibility varied from 72.9 to 103.7 %, from 1.8 to 9.2 %, and from 3.1 to 9.4 %, respectively. The proposed method was used to study the pharmacokinetic dissipation of sulfoxaflor stereoisomers in soil under greenhouse conditions. The estimated half-life ranged from 5.59 to 6.03 d, and statistically nonsignificant enantioselective degradation was observed. This study not only demonstrates that the UPC²-MS/MS system is an efficient and sensitive method for sulfoxaflor stereoseparation, but also provides the first experimental evidence of the pharmacokinetic dissipation of sulfoxaflor stereoisomers in the environment. Graphical Abstract

Chemical structure and UPC²-MS/MS separation chromatogram of sulfoxaflor. (* stereogenic center)     

A novel electrochemical DNA biosensor construction based on layered CuS–graphene composite and Au nanoparticles

A novel CuS–graphene (CuS-Gr) composite was synthesized to achieve excellent electrochemical properties for application as a DNA electrochemical biosensor. CuS-Gr composite was prepared by a hydrothermal method, in which two-dimensional graphene served as a two-dimensional conductive skeleton to support CuS nanoparticles. A sensitive electrochemical DNA biosensor was fabricated by immobilizing single-stranded DNA (ss-DNA) labeled at the 5′ end using 6-mercapto-1-hexane (HS-ssDNA) on the surface of Au nanoparticles (AuNPs) to form ssDNA-S–AuNPs/CuS-Gr, and hybridization sensing was done in phosphate buffer. Cyclic voltammetry and electrochemical impedance spectroscopy were performed for the characterization of the modified electrodes. Differential pulse voltammetry was applied to monitor the DNA hybridization using an [Fe(CN)₆]^3?/4? solution as a probe. Under optimum conditions, the biosensor developed exhibited a good linear relationship between the current and the logarithm of the target DNA concentration ranging from 0.001 to 1 nM, with a low detection limit of 0.1 pM (3σ/S). The biosensor exhibited high selectivity to differentiate one-base-mismatched DNA and three-base-mismatched DNA. The results indicated that the sensing platform based on CuS-Gr provides a stable and conductive interface for electrochemical detection of DNA hybridization, and could easily be extended to the detection of other nucleic acids. Graphical abstracts

?     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

Correction of the lack of commutability between plasmid DNA and genomic DNA for quantification of genetically modified organisms using pBSTopas as a model

Plasmid calibrators are increasingly applied for polymerase chain reaction (PCR) analysis of genetically modified organisms (GMOs). To evaluate the commutability between plasmid DNA (pDNA) and genomic DNA (gDNA) as calibrators, a plasmid molecule, pBSTopas, was constructed, harboring a Topas 19/2 event-specific sequence and a partial sequence of the rapeseed reference gene CruA. Assays of the pDNA showed similar limits of detection (five copies for Topas 19/2 and CruA) and quantification (40 copies for Topas 19/2 and 20 for CruA) as those for the gDNA. Comparisons of plasmid and genomic standard curves indicated that the slopes, intercepts, and PCR efficiency for pBSTopas were significantly different from CRM Topas 19/2 gDNA for quantitative analysis of GMOs. Three correction methods were used to calibrate the quantitative analysis of control samples using pDNA as calibrators: model a, or coefficient value a (Cva); model b, or coefficient value b (Cvb); and the novel model c or coefficient formula (Cf). Cva and Cvb gave similar estimated values for the control samples, and the quantitative bias of the low concentration sample exceeded the acceptable range within ±25 % in two of the four repeats. Using Cfs to normalize the Ct values of test samples, the estimated values were very close to the reference values (bias ?13.27 to 13.05 %). In the validation of control samples, model c was more appropriate than Cva or Cvb. The application of Cf allowed pBSTopas to substitute for Topas 19/2 gDNA as a calibrator to accurately quantify the GMO. Graphical Abstract

?     

Electroactive shape memory effect of radiation cross-linked SBS/LLDPE composites filled with carbon black

The poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymer and linear low-density polyethylene (LLDPE) were blended and irradiated by γ rays to prepare shape memory polymer (SMP). Different weight fractions of conductive carbon black (CB) were filled into SMP to form a novel electroactive shape memory CB/SBS/LLDPE composite. The CB reinforced radiation cross-linked SBS/LLDPE blends for the improvement of the mechanical weakness and conductivity of SBS/LLDPE bulk and for wide practical engineering uses. The electroactive shape memory CB/SBS/LLDPE composites were investigated by electrical properties, mechanical, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and electroactive shape memory effects. It is found that the tensile strength, storage modulus, and resistance against mechanical and thermal mechanical cycle loading in the developed composites increased due to the role of reinforcement of CB. The melting temperatures and volume resistance of the composites decreased with the increment of CB for excellent electrical conductivity of CB. The electroactive shape memory effects of developed CB/SBS/LLDPE composites were affected by CB weight fractions and applied voltage, while good shape recovery could be obtained in the shape recovery test. When the CB fraction is more than 5 wt%, full recovery can be observed after tens of seconds and shape recovery speed increased with CB fractions and voltage increasing. However, the shape recovery rate decreases slightly with increment of cycle times.     

A colorimetric assay for d-Penicillamine in urine and plasma samples based on the aggregation of gold nanoparticles

We report herein the development of a highly sensitive colorimetric method for detection of d-Penicillamine using citrate-capped gold nanoparticles (AuNPs). This assay relies upon the distance-dependent of gold nanoparticles surface plasmon resonance band of gold nanoparticles. By replacing the thiol-containing chelator drug, d-Penicillamine, with citrate on the gold nanoparticles surface, a new peak appearing at a longer wavelength intensifies and shifts further to the red from the original peak position due to aggregation of gold nanoparticles which depends on ionic strength, gold nanoparticles and d-Penicillamine concentration. During this process, the plasmon band at 521 nm decreases gradually along with the formation of a new red-shifted band at 630 nm. The calibration curve which is derived from the ratio intensities of absorbance at longer wavelength (630 nm) to original wavelength (521 nm) displays a linear relation in the range of 5.0 × 10^?6–3.0 × 10^?4 M d-Penicillamine. Lower limit of detection for d-Penicillamine, at the signal-to-noise ratio of 3 (3σ), was 3.8 × 10^?6 M. The developed methodology was successfully applied for the determination of d-Penicillamine in human urine and plasma.     

The Influence of Adnectin Binding on the Extracellular Domain of Epidermal Growth Factor Receptor

The precise and unambiguous elucidation and characterization of interactions between a high affinity recognition entity and its cognate protein provides important insights for the design and development of drugs with optimized properties and efficacy. In oncology, one important target protein has been shown to be the epidermal growth factor receptor (EGFR) through the development of therapeutic anticancer antibodies that are selective inhibitors of EGFR activity. More recently, smaller protein derived from the 10th type III domain of human fibronectin termed an adnectin has also been shown to inhibit EGFR in clinical studies. The mechanism of EGFR inhibition by either an adnectin or an antibody results from specific binding of the high affinity protein to the extracellular portion of EGFR (exEGFR) in a manner that prevents phosphorylation of the intracellular kinase domain of the receptor and thereby blocks intracellular signaling. Here, the structural changes induced upon binding were studied by probing the solution conformations of full length exEGFR alone and bound to a cognate adnectin through hydrogen/deuterium exchange mass spectrometry (HDX MS). The effects of binding in solution were identified and compared with the structure of a bound complex determined by X-ray crystallography. ?      

Quantitative characterization by asymmetrical flow field-flow fractionation of IgG thermal aggregation with and without polymer protective agents

Complexes formed between poly(acrylates) and polyclonal immunoglobulin G (IgG) in its native conformation and after heat stress were characterized using asymmetric flow field-flow fractionation (AF4) coupled with on-line UV-Vis spectroscopy and multi-angle light-scattering detection (MALS). Mixtures of IgG and poly(acrylates) of increasing structural complexity, sodium poly(acrylate) (PAA), a sodium poly(acrylate) bearing at random 3 mol % n-octadecyl groups, and a random copolymer of sodium acrylate (35 mol %), N-n-octylacrylamide (25 mol %) and N-isopropylacrylamide (40 mol %), were fractionated in a sodium phosphate buffer (0.02 M, pH 6.8) in the presence, or not, of 0.1 M NaCl. The AF4 protocol developed allowed the fractionation of solutions containing free poly(acrylates), native IgG monomer and dimer, poly(acrylates)/IgG complexes made up of one IgG molecule and a few polymer chains, and/or larger poly(acrylates)/IgG aggregates. The molar mass and recovery of the soluble analytes were obtained for mixed solutions of poly(acrylates) and native IgG and for the same solutions incubated at 65 °C for 10 min. From the combined AF4 results, we concluded that in solutions of low ionic strength, the presence of PAA increased the recovery ratio of IgG after thermal stress because of the formation of electrostatically-driven PAA/IgG complexes, but PAA had no protective effect in the presence of 0.1 M NaCl. Poly(acrylates) bearing hydrophobic groups significantly increased IgG recovery after stress, independently of NaCl concentration, because of the synergistic effect of hydrophobic and electrostatic interactions. The AF4 results corroborate conclusions drawn from a previous study combining four analytical techniques. This study demonstrates that AF4 is an efficient tool for the analysis of protein formulations subjected to stress, an important achievement given the anticipated important role of proteins in near-future human therapies. ?      

Interactions of collagen and cellulose in their blends with 1-ethyl-3-methylimidazolium acetate as solvent

Collagen/cellulose blended solutions with collagen/cellulose mass ratio (Col/Cel) of 0, 1/40, 1/20, 1/10 and 1/5 were prepared using [Emim]Ac as solvent. The interactions between the two polymers before and after regeneration were investigated. In steady shear flow, all of the experimental viscosity values were greater than those of the estimated values calculated from the log-additivity rule for each sample, suggesting interactions between the two polymers in solutions. All solutions exhibited shear thinning behavior and the flow curves could be described by Cross model. Zero shear viscosity (η ₀) versus Col/Cel was examined and a linear increase (from 8.73 to 16.39 Pa·s) can be observed for η ₀ as Col/Cel ≤ 1/10, while there was only a slight increase (from 16.39 to 18.42 Pa·s) in η ₀ as Col/Cel increased to 1/5. Dynamic rheology results suggested the existence of aggregates in solution with Col/Cel = 1/10. Furthermore, the activation energy of solution was 84.5 kJ mol^?1 as Col/Cel = 1/10, higher than that of cellulose solution (44.2 kJ mol^?1). Regenerated films were prepared and characterized to trace back the interactions between the two polymers in [Emim]Ac. Fourier transform infrared spectroscopy indicated the hydrogen-bond interaction between collagen and cellulose in films. The denaturation temperature of collagen in films with Col/Cel ≤ 1/10 could be improved, but it was decreased with the increase of collagen content, and finally was reduced to be close to that of collagen as Col/Cel = 1/5. The features of dynamic mechanical analysis for films were indicative of the lack of homogeneity between collagen and cellulose as Col/Cel = 1/5. Atomic force microscopy images further confirmed the phase-separation when Col/Cel = 1/5.     

Visual detection of arginine,histidine and lysine using quercetin-functionalized gold nanoparticles

We report on the use of quercetin-functionalized gold nanoparticles (QC-AuNPs) as a colorimetric probe for the amino acids arginine (Arg), histidine (His) and lysine (Lys). The method is based on the aggregation of the QC-AuNPs that is caused by these amino acids and leads to a visually detectable color change from red to blue. The absorption maxima shift from 525 nm to 702, 693, and 745 nm, respectively. Aggregations are confirmed by dynamic light scattering (DLS) and transmission electron microscopic techniques (TEM). The effects of the QC concentration, temperature and reaction time for the preparation of QC-Au NPs were tested. Other amino acids do not interfere. Under the optimal conditions, linear relationships exist between the absorption ratios at 702/525 nm (for Arg), 693/525 nm (for His), and 745/525 nm (for Lys) over the concentrations ranges from 2.5–1,250 μM (Arg) and 1–1,000 μM (His and Lys), respectively. The respective limits of detection are 0.04, 0.03, and 0.02 μM. The method provides a useful tool for the rapid visual and instrumental determination of the three amino acids. Figure

We report the use of quercetin as novel reagent for preparation and functionalization of gold nanoparticles to colorimetric sensing of three aminoacids (arginine, histidine and lysine). This is based on the aggregation of QC-AuNPs induced by three aminoacids.