Headspace solid phase microextraction for screening for the presence of resins in Egyptian archaeological samples

The aim of this study was to use headspace solid phase microextraction (SPME) to reveal the presence of resin in archaeological samples, such as mummification balms, from ancient Egypt. Experiments were first performed with fresh resins of known origin. The SPME fibre readily extracted mono- and sesquiterpenes and, to a lesser extent, diterpenes. Using mass spectra and retention indices of constitutive compounds, qualitative analysis of the volatile fraction allowed us to differentiate resins or gum-resins such as myrrh, olibanum, galbanum, labdanum, mastic, and conifer resins. SPME was then successfully applied to archaeological samples from ancient Egypt in which the presence of resins was detected. Volatile components were desorbed and trapped according to the same SPME procedure as was applied to fresh resins, after a sample preparation consisting of a fine grinding.     

Characterisation of organic residues in pottery vessels of the Roman age from Antinoe (Egypt)

In the framework of a study on the Egyptian ceramic vessels belonging to the archaeological collection of the Istituto Papirologico Vitelli (Florence), the characterisation of organic residues from three findings of the 5th–7th centuries A.D. has been performed. The materials were identified by two analytical procedures based on Fourier transformed infrared spectroscopy (FTIR) and on gas chromatography coupled with mass spectrometry (GC–MS), respectively. The first procedure is suitable for detecting the functional groups of organic substances and thus for distinguishing them; the second permits the simultaneous analysis of several natural substances such as vegetable resins and oils, bitumen, tar and pitch, and waxes.The presence of monocarboxylic acids, α,ω-dicarboxylic acids, long-chain dihydroxylated acids, and terpenic species, highlights that although the organic residues showed a high heterogeneity in composition, they mainly consisted of materials of vegetable origin. In particular, the presence of oxidation products of characteristic unsaturated fatty acids suggests the occurrence of oil produced from plant seeds of the Cruciferae family, some of which are reported to have been used in ancient Egypt to produce oil. Moreover, the presence of characteristic diterpenic biomarkers in two of the three pieces of pottery enables us to assess the use of both pine resin and pine pitch.     

Chelating Resins in Analytical Chemistry

Chelating resins, the polymeric complexing compounds, are specific and selective ion exchange resins. A chelating ion exchange resin consists essentially of two components, i.e. a chelating group and a polymeric matrix. The properties of both components affect the selectivity of the synthesized resin. Methods used to synthesize chelating resins are reviewed. The analytical and physical techniques used to characterize the dissociation constant, metal capacity and distribution coefficient of the newly synthesized resin as well as the coordination site, the composition and the formation constant of the metal-resin complexes are discussed. Chelating resins could be used in various forms. Some important features of the analytical application of chelating resins, including selective concentration and separation both in inorganic analysis and organic analysis are also discussed. The techniques by which sorption or separation with the help of chelating resins achieved can be static, dynamic, or chromatographic. After sorptive concentration or separation, the elements can be determined either directly in the sorbent phase, its decomposition residue, the eluent solution after desorption, or the effluent after the solution has been passed through the sorbent. Various objects such as natural waters, geological objects, industrial materials, foodstuffs, coal, fuel oil. shale oil, transuranium elements and biological materials could be analyzed with the help of chelating resins.     

Detection of volatile organic compounds by temperature-programmed desorption combined with mass spectrometry and Fourier transform infrared spectroscopy

A temperature-programmed desorption (TPD) device connected to a mass spectrometer was used to detect volatile organic compounds from air samples. The main aim was to develop an analytical method, by which both non-polar and polar organic components can be detected in the same run. In TPD, the adsorbed compounds are desorbed from the resin more slowly than in the conventional trapping techniques, such as purge-and-trap technique, in which the resin is flash-heated and the compounds are desorbed at the same time to a cryogenic trap or an analytical column. In TPD, the adsorbent resin acts also as an analytical column. In this way it is possible to obtain more rapid analysis, and also a more simple instrumentation, which can be used on-line and on-site. In this work, a new version of TPD device, which uses a resistor for heating and a Peltier element for rapid cooling, was designed and constructed. Various adsorbent resins were tested for their adsorption and desorption properties of both polar and non-polar compounds. When using a mixture of adsorbent resins, Tenax TA and HayeSep D, it was possible to analyze both polar, low-molecular weight compounds, such as methanol and ethanol, and non-polar volatile organic compounds, such as benzene and toluene, in the same run within 15 min including sampling. The same TPD principle was also tested using a Fourier transform infrared spectrometer as an analytical instrument, and the results showed that it was possible to obtain a separation of similar compounds, such as hexane and heptane, and still retaining the same sensitivity as the original on-line FTIR instrument.     

Direct exposure electron ionization mass spectrometry and gas chromatography/mass spectrometry techniques to study organic coatings on archaeological amphorae

Two different analytical approaches, direct exposure electron ionization mass spectrometry (DE-MS) and gas chromatography/mass spectrometry (GC/MS), were compared in a study of archaeological resinous materials. DE-MS was found to be an efficient fingerprinting tool for the fast screening of organic archaeological samples and for providing information on the major components. GC/MS appeared to be more efficient in unravelling the sample composition at a molecular level, despite the long analysis time and the need for a wet chemical pretreatment. Both procedures were applied to characterize the organic material present as coatings in Roman and Egyptian amphorae. DE-MS successfully identified abietanic compounds, hence a diterpenic resinous material could be identified and its degree of oxidation assessed. GC/MS enabled us to identify dehydroabietic acid, 7-oxodehydroabietic acid, 15-hydroxy-7-oxodehydroabietic acid, 15-hydroxydehydroabietic acid, retene, tetrahydroretene, norabietatriene, norabietatetraene and methyl dehydroabietate. These oxidized and aromatized abietanes provided evidence that the amphorae examined were waterproofed with a pitch produced from resinous wood of plants from the Pinaceae family. The chemometric evaluation of the GC/MS data highlighted significant chemical differences between the pitches found in the two archaeological sites, basically related to differences in the production techniques of the materials and in their degradation pathways.     

Chemical study of triterpenoid resinous materials in archaeological findings by means of direct exposure electron ionisation mass spectrometry and gas chromatography/mass spectrometry

A systematic study of standard triterpenes (alpha-amyrine, oleanolic acid, betulin, lupeol, betulinic acid and lupenone) and of raw resinous materials (frankincense resin, mastic resin and birch bark pitch) was performed using direct exposure electron ionisation mass spectrometry (DE-MS) and gas chromatography/mass spectrometry (GC/MS). DE-MS provides a mass spectral fingerprint of organic materials in a few minutes which highlights the compounds that are the main components in the sample. The application of principal component analysis (PCA) on DE-MS data in the mass ranges m/z 181-260 and m/z 331-500, corresponding to the fragmentation of triterpenoid molecules, enabled us to distinguish between different triterpenoid materials such as mastic resin, frankincense resin and birch bark pitch, and to graphically plot the resinous substances in three separate clusters, retaining 89% of the total variance. GC/MS analysis of the same materials has permitted us to elucidate in detail the molecular composition and to identify minor components and species that act as markers of the degradation undergone by the materials. The paper also reports the results for the organic residues contained in an Egyptian censer (5th-7th century AD) which was recovered in the excavation of the Necropolis of Antinoe (Egypt), and for the hafting material found on a Palaeolithic tool recovered at the site of Campitello (Arezzo, Tuscany), dating back to the Mid-Pleistocene period. Although DE-MS was found to be a fast analytical tool, it failed to give any information on the presence of less abundant compounds when applied to mixtures of different materials: only mastic resin was found in the residues from the Roman censer, whereas GC/MS analysis identified the presence of a vegetable oil from Brassicaceae seeds and Pinaceae resin. Birch bark pitch as a pure material was identified in the sample from the Palaeolithic flint flake using both procedures.     

Characterisation of embalming materials of a mummy of the Ptolemaic era. Comparison with balms from mummies of different eras

Gas chromatography-mass spectrometry has been used to determine the nature of organic materials used in mummification balms. A comparative analysis of samples taken from Egyptian mummies is developed. The results are given in two parts. First, it is shown that the chemical composition of the balm is practically independent of the part of the mummy from which it is taken. This study was done on a Ptolemaic mummy (circa 100 BC from the Guimet Museum in Lyon). Fats, beeswax, and diterpenic resins were the main components: they were found everywhere. Castor oil was also very often detected (in half of the samples). This particular fat is present in the balm inside the thorax but not in the skull. Moreover it is shown that a vegetable tannin was employed. Components indicative of vegetable tannin input (gallic acid and inositols) were found in seven samples out of eighteen, particularly close to the body and on the canopic pack of the heart. Secondly, some conclusions from a comparative study of the composition of balms from mummies of various social levels as well as of different Egyptian periods are reported. It is shown that beeswax was used as from very early times (XVIIIth dynasty). The mixture of beeswax, fats, and diterpenoid resins would appear to be more recent. The balms of three mummies dating from more recent Egyptian periods (XIXth to XXVth dynasty) were analysed. No evidence of a resin, gum-resin, or plant gum could be found. Some mummies would appear to have been embalmed with fats or beeswax. Finally, the entrails canopic pack said to belong to Ramses II undoubtedly shows an embalming process with a triterpenic resin of the mastic type. The adopted analytical methodology enabled us to achieve simultaneous detection of four components of the balm of the Ptolemaic mummy. Analysis of the other five mummies revealed far less complex chemical compositions for the balms. This may be an indication of different embalming processes, although we should bear in mind the question of organic matter preservation through the ages.     

Organic mass spectrometry in archaeology: evidence for Brassicaceae seed oil in Egyptian ceramic lamps

An analytical procedure based on alkaline hydrolysis and silylation followed by GC/MS analysis was employed to study the formation of characteristic acidic compounds and the development of a distinctive chromatographic pattern in the course of accelerated ageing tests on Brassicaceae seed oil. On the basis of mass spectra of trimethylsilyl derivatives, the main degradation products were identified as alpha,omega-dicarboxylic, omega-hydroxycarboxylic and dihydroxycarboxylic acids, including 11,12-dihydroxyeicosanoic acid and 13,14-dihydroxydocosanoic acid. The mass spectra of both these compounds are characterised by fragment ions arising from the alpha cleavage of the bond between the two vicinal trimethylsiloxy groups, resulting in fragments at m/z 215 and 345 for 11,12-dihydroxyeicosanoic acid, and at m/z 215 and 373 for 13,14-dihydroxydocosanoic acid. Other significant fragment ion-radicals from rearrangement process at m/z [M - 90](+*), [M - 142](+*), 204 as well as fragment ions at m/z [M - 15](+), [M - 105](+), 217 are present in the mass spectra of both the compounds. The results obtained for reference materials were compared with those relating to archaeological organic materials recovered in Egyptian pottery lamps. The occurrence of the same characteristic degradation products found in the reference materials subjected to accelerated ageing indicates an unambiguous origin for the organic archaeological remains and represents the chemical evidence for the use of oil from seeds of Brassicaceae as illuminant.     

Characterisation of varnishes used in violins by pyrolysis-gas chromatography/mass spectrometry

The correct characterisation and a detailed knowledge of the materials originally used in violin varnishes, like natural resins, is crucial for the conservation in museums and for a suitable restoration technique. The study presented here reports on the potential of pyrolysis (Py) coupled with gas chromatography (GC) and mass spectrometry (MS) for the identification of chemical markers of each resin; this technique is very sensitive and selective, it needs a small quantity of sample and does not require chemical treatments. To improve the chromatographic behaviour of polar compounds the derivatising agent tetramethylammonium hydroxide (TMAH) in combination with pyrolysis has been used, in the so-called TMAH thermochemolysis or thermally assisted hydrolysis and methylation (THM), or more simply pyrolysis-methylation. The natural resins studied were colophony, sandarac, manila copal, elemi, amber and benzoin, mainly composed of terpenic compounds, with the exception of the latter, composed of aromatic compounds. Many compounds were identified; in particular, methyl esters of resinous acids that, individually or in a group, can be used as chemical markers. However, through this technique it was not possible to distinguish between the sandarac and manila copal resins because their chromatographic behaviour is very similar. Finally, the procedure applied has been employed in the characterisation of original varnish samples.     

Characterisation of fresh and aged terpenic resins by micro-FTIR and GC-MS analyses of varnishes in XVI-XVII centuries paintings

Resinous materials, generally added to drying oils, were often employed as final protective films in paintings, both in tempera and oil techniques. Most of the resins used in fine arts come from exudates of plants. Natural resins are mainly composed by terpenoids. Among these resins, dammar, rosin, mastic, elemi gum, Venice turpentine were frequently employed in easel paintings. The aim of this work is the identification of natural resins in samples collected from works of art. In this paper we propose to use micro-FTIR spectrometry as a preliminary and non destructive technique to detect the presence of resinous materials in microsamples collected from paintings, followed by GC-MS analyses to obtain a precise identification of the resin. To reach this aim commercial resins, employed as standard, were analysed previously by micro-FTIR spectrometry and then analysed by GC-MS chromatography, searching characteristic chemical compounds used as "markers" of resins. The results obtained on standards allowed us to successfully analyse samples collected from two works of art: the "Portrait of a Young Gentleman", by Lorenzo Lotto (XVI century), and the "Madonna with the Infant Jesus and Saints": by Carlo Maratta (XVII secolo).     

Chemical signatures of fossilized resins and recent plant exudates

Amber is one of the few gemstones based on an organic structure. Found over most of the world, it is the fossil form of sticky plant exudates called resins. Investigation of amber by modern analytical techniques provides structural information and insight into the identity of the ancient plants that produced the source resin. Mass spectrometric analysis of materials separated by gas chromatography has identified specific compounds that are the basis of a reliable classification of the different types of amber. NMR spectroscopy of bulk, solid amber provides a complementary classification. NMR spectroscopy also can be used to characterize modern resins as well as other types of plant exudates such as gums, gum resins, and kinos, which strongly resemble resins in appearance but have very different molecular constitutions.     

Study of the influencing effect of pigments on the photoageing of terpenoid resins used as pictorial media

Terpenoid resins have been mainly used as components of pictorial varnishes and binding media from ancient times. In such latest instances, the resin is mixed with pigments affecting its physical and chemical properties. A new procedure based on gas chromatography-mass spectrometry (GC/MS) has been applied, in this work, in combination with Fourier transform infrared spectroscopy (FTIR), with the aim of determining the changes undergone by di- and triterpenoid resins employed as components of binding media. The GC/MS method is based on the derivatisation of these resins using trimethylsilylimidazol. Characterization of the main components of the di- and triterpenoid fractions and their oxidised products, occurring in the diterpenoid resin colophony and a triterpenoid Mexical copal (Bursera cuneata (Schl) Engl.), has been achieved. Artificially photoaged specimens of pure resin and binary systems pigment+resin prepared as thin films using lead white, ochre yellow, umber raw and verdigris have also been analysed to study the changes undergone by the di- and triterpenoid components of the resins. Oxidation processes taking place on di- and triterpenoids during photoageing are described. Moreover, the results obtained indicate that pigments have a different effect on the two studied resins. Thus, the presence of pigments induces, in general, a catalysing effect on the oxidative polymerisation reactions in the earliest stages of the natural curing of the paint films whereas a loss of the catalysing effectiveness, in particular, for verdigris containing specimens, is observed during photoageing. Complexation of diterpenoid molecules with copper(II) ions in the earliest stages of the curing has also been evidenced by FTIR analysis.     

FT-NIR spectroscopy for non-invasive identification of natural polymers and resins in easel paintings

In the present study, the analytical strengths and limitations of near-infrared (NIR) spectroscopy to non-invasively characterize organic components in painting materials have been investigated. In spite of the increased amount of information available today from advanced modern analytical instrumentations dedicated to cultural heritage, the non-invasive identification of materials belonging to the wide class of organic compounds historically used in paintings is still a challenging task. Near-infrared spectroscopy offers several attractive features that make this technique particularly suitable to this purpose. In fact, it is non-invasive, allows for non-contact measurements in reflectance mode, gives molecular information on complex macromolecules, and can be performed on-site by means of portable devices. First-derivative transformation of reflectance spectroscopic data has been applied to provide a simple and fast way to deduce more information from NIR spectra. This approach has allowed spectral features to be identified that can be useful to distinguish different compounds belonging to the classes of lipids, proteins, and resins. To this purpose, at first, a spectral database of pure standard has been collected. Our analytical approach was then successfully validated on pictorial models reproducing the typical stratigraphy of an easel painting. As final step, the study of a real painting has been attempted and a drying oil, animal glue, and a terpenic natural resin, as well as an earth pigment were clearly identified, as cross-validated by GC-MS analysis.     

GC-MS analysis of penta- and tetra-cyclic triterpenes from resins of Pistacia species. Part II. Pistacia terebinthus var. Chia

Pistacia species contain oleoresins with bioactive triterpenes. In this study triterpenes, including minor components, were identified and quantified in both neutral and acidic fractions of Pistacia terebinthus var. Chia resin, grown exclusively in Chios island (Greece), collected traditionally, as well as using stimulating agents (liquid collection). It was proved that these two resin samples were composed of several different minor triterpenes, while major constituents were similar but in different proportions. Compounds that differentiated two resin samples of P. lentiscus and P. terebinthus var. Chia, both traditionally collected, were detected, in order to identify the nature of resins present in archaeological materials. In the traditionally collected resin, 37 triterpenes were identified, 12 in the acidic and 25 in the neutral fraction. In the liquid collection resin 10 compounds were identified in the acidic and 23 in the neutral fraction, while 16 compounds were not contained in the traditionally collected resin. The main triterpenes in both resin samples collected traditionally and using stimulating agents were: isomasticadienonic acid (23.6 and 26.3% w[sol ]w of the triterpenic fraction, respectively), 28-norolean-17-en-3-one (16.3 and 17.5% w[sol ]w of the triterpenic fraction, respectively) and masticadienonic acid (5.8 and 6.0% w[sol ]w of the triterpenic fraction). In this study the qualitative and quantitative composition of triterpenes was compared in the Pistacia lentiscus and P. terebinthus var. Chia resin samples collected with the traditional and new liquid techniques, and also triterpenes in resins of P. terebinthus obtained by the traditional technique and using stimulating agents. The aim of the study was also to examine whether the collection technique influenced the triterpenes contained in P. terebinthus var. Chia resin samples.     

酚醛树脂分子量及分布场解吸质谱表征方法研究

酚醛树脂分子量及分布的表征方法有很多,如蒸气压渗透法(VPO)、气相色谱、高压液相色谱和凝胶渗透色谱等,但由于酚醛树脂存在众多异构体,这些方法均有一定限制性.场解吸质谱(FD-MS)方法的特点是只给出样品固有组分的分子峰,不产生碎片离子峰,用于酚醛树脂的表征,可以直接得出树脂所有固有组分的分子离子峰值,及树脂不同缩合度组分的相对含量,非常适用于组份繁多的酚醛树脂的的分子量及分布表征研究.以苯酚、甲酚及甲醛等原料分别制备了Resole型苯酚-甲醛树脂、Novolac型苯酚-甲醛树脂、Novolac型甲酚树脂及混酚-甲醛树脂,利用FD-MS对制备的几种不同类型酚醛树脂的分子量及分布进行了研究.结果表明,通过FD-MS谱图分析还可以得到树脂缩聚程度、原料种类、树脂特性等信息,对于鉴别及剖析各种类型酚醛树脂方便有效.     

Molecular characterisation of birch bark tar by headspace solid-phase microextraction gas chromatography-mass spectrometry: a new way for identifying archaeological glues

To develop an analytical methodology, as non-destructive as possible, suitable for the identification of natural substances from archaeological origin, we studied the potentiality of solid-phase microextraction (SPME) for analysing birch bark tar, an adhesive commonly used during ancient times. First of all, birch bark tars were produced by a controlled heating of birch bark. The two kinds of samples obtained using different processes of fabrication, one at liquid state, the second one at solid state, were then analysed by headspace HS-SPME-GC-MS. Different conditions of sample treatment were tested (two different fibre coatings, various times and temperatures of extraction) in order to suggest optimal conditions for the analysis of birch bark tar. Both samples were shown to be rich in volatile organic components. Two main groups of constituents, namely phenolic compounds issued from lignin or tannin known to be present in bark and sesquiterpenoid hydrocarbons, secondary metabolites largely distributed in the plant kingdom, were detected for the first time in birch bark tar. HS-SPME-GC-MS appears thus to be a very efficient method for investigating the volatiles emitted by plant tars and could be further used for the study of birch bark tar samples issued from archaeological context.     

褐煤蜡树脂中多环芳烃组成的研究

采用气相色谱法对云南寻甸褐煤蜡树脂和吉林舒兰褐煤蜡树脂,进行了多环芳烃分布特征的研究,从树脂中鉴定出６８个化合物的同系物。两个树脂样均以菲系化合物占有优势,舒兰树脂中菲系列量约三倍于寻甸树脂的相应量     

Raman spectroscopic analysis of a tembetá: a resin archaeological artefact in need of conservation

The Raman spectroscopic analysis of a Brazilian tembetá, a lip-plug which signifies the attainment of manhood in tribal cultures, and dated to about 1600 years BP is reported. Tembetá are usually made of wood or stone but this lip-plug is very rare in that it is made of resin, which has been severely degraded in the burial environment; the brownish-red fragmented remains are in an extremely fragile condition and information about the chemical composition was required before urgent conservation was undertaken. Raman spectra excited at 1064 nm showed the presence of triterpenoid materials in the main body of the artefact, and indicated that the red-brown coating was not iron(III) oxide as suspected but rather degraded resin. Comparison with contemporary resins has facilitated the partial identification of the material in this important artefact as a triterpenoid-rich material, which is closely similar to the Pistacia species. A possible archaeological link to the Jatobá do Cerrado (Hymenaea stigonocarpa Mart.) resin has been excluded as the Raman spectra of this resin specimen and the tembetá do not match; indeed, the Jatobá do Cerrado resin specimen belongs to a diterpenoid-rich classification as befits its Hymenaea species.     

Investigations by various analytical techniques to the correct classification of archaeological finds and delineation of technological features: Late Roman lamps from Egnatia: From imports to local production

Late Roman oil lamps from the archaeological site of Egnatia (Fasano, Brindisi, Italy) were characterized from physical–chemical, mineralogical and morphological points of view. Atomic Spectroscopy, Scanning Electron Microscopy and X-Ray Diffraction analyses were carried out on ceramic body and coatings with the aim of identifying the provenance of lamps, in order to arrive at a correct archaeological classification of finds and to outline their technological features.The analytical results show that the finds differ in raw materials and in production technology. The statistical multivariate treatment of compositional data of ceramic bodies groups the objects into two macro clusters and, according to a study of their different petrographic features and by a comparison with coeval pottery whose provenance is already known, suggests one group to have been imported from North Africa and the other to have been locally produced. Moreover, chemical results and in-depth archaeological analyses allow us to split the imported lamps into two subgroups, hypothesizing the first group to originate from central Tunisia and the second from the north of the same country.The analytical characterisation of finds, by different complementary techniques, has allowed us to identify the raw materials and the technological solutions used by the ancient potters from Egnatia to produce lamps. The potters made lamps which had an external appearance very similar to that of African prototypes, but which were nevertheless different as they employed the locally available materials.     

Study of Burseraceae resins used in binding media and varnishes from artworks by gas chromatography-mass spectrometry and pyrolysis-gas chromatography-mass spectrometry

In the present work, a study attempting to characterize the Manila elemi and Mexican copal resins from the Burseraceae family, which are used as components of varnishes and binding media of artworks, has been carried out. A new GC-MS method involving the use of methyl chloroformate as derivatisation reagent has been proposed. A second method which uses pyrolysis-GC-MS and hexamethyldisilazane as derivatization reagent has also been applied. Characterization of the main components of the mono-, sesqui- and triterpenoid fractions occurring in the raw materials has been achieved. Both alpha- and beta-amyrin have been established as the major triterpenoid compounds occurring in these resins together with hop-22(29)-en-3beta-ol, found only in the Mexican copal. Artificially aged samples of Manila elemi and Mexican copal have also been analysed in order to study the stability of the triterpenoid components of the resins and their possible use as marker molecules. The results obtained indicate that these molecules, in particular, alpha- and beta-amyrin undergo oxidation processes during both artificial and natural ageing. Nevertheless, hop-22(29)-en-3beta-ol could be selected as marker compound for Mexican copal. The proposed methods of analysis have been applied to real paint samples extracted from paintings in which Mexican copal was present as the main component of an "oleoresin" binding medium to assess their ability for identifying this product when used in artworks. Satisfactory identification of this resin is obtained by means of GC-MS whereas Py-GC-MS provides, in general, weaker signals for the components of the resin. Additionally, the influence of the pigments present in real samples on the resin ageing process has been considered.