N‐Heterocyclic Carbene Catalyzed Photoenolization/Diels–Alder Reaction of Acid Fluorides

The combination of light activation and N‐heterocyclic carbene (NHC) organocatalysis has enabled the use of acid fluorides as substrates in a UVA‐light‐mediated photochemical transformation previously observed only with aromatic aldehydes and ketones. Stoichiometric studies and TD‐DFT calculations support a mechanism involving the photoactivation of an ortho‐toluoyl azolium intermediate, which exhibits “ketone‐like” photochemical reactivity under UVA irradiation. Using this photo‐NHC catalysis approach, a novel photoenolization/Diels–Alder (PEDA) process was developed that leads to diverse isochroman‐1‐one derivatives.     

The effect of electron correlation on the conformational space of melatonin

The pineal gland hormone melatonin regulates several physiological processes including circadian rhythm and also alleviates oxidative stress‐induced degenerative diseases. In spite of its important biological roles, no high level ab initio conformational study has been conducted to reveal its structural features. In this work, the conformational flexibility of melatonin was investigated using correlated ab initio calculations. Conformers, obtained previously at the Hartree‐Fock level (HF/6‐31G*), were fully optimized using second order Møller‐Plesset perturbation theory applying the frozen core approximation (MP2(FC)/6‐31G*). Furthermore, single‐point MP4(SDQ,FC)/6‐31G*//MP2(FC)/6‐31G* computations were performed to investigate the effect of higher order perturbation terms. The HF and MP2 conformational spaces are considerably different: the initial 128 structures converged into 102 different local minima as confirmed by frequency calculations; 28 new minima appeared and 26 previous HF local minima disappeared; no “all‐trans” C3 side chain conformations are seen at the MP2(FC) level. The MP2 global minimum conformation is stabilized by an aromatic‐side chain interaction. © 2008 Wiley Periodicals, Inc. J Comput Chem, 2008     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

From Packed “Sandwich” to “Russian Doll”: Assembly by Charge‐Transfer Interactions in Cucurbit[10]uril

As the host possessing the largest cavity in the cucurbit[n]uril (CB[n]) family, CB[10] has previously displayed unusual recognition and assembly properties with guests but much remains to be explored. Herein, we present the recognition properties of CB[10] toward a series of bipyridinium guests including the tetracationic cyclophane known as blue box along with electron‐rich guests and detail the influence of encapsulation on the charge‐transfer interactions between guests. For the mono‐bipyridinium guest (methylviologen, MV ²⁺), CB[10] not only forms 1:1 and 1:2 inclusion complexes, but also enhances the charge‐transfer interactions between methylviologen and dihydroxynaphthalene ( HN ) by mainly forming the 1:2:1 packed “sandwich” complex (CB[10] ? 2 MV ²⁺ ?HN ). For guest 1 with two bipyridinium units, an interesting conformational switching from linear to “U” shape is observed by adding catechol to the solution of CB[10] and the guest. For the tetracationic cyclophane‐blue box, CB[10] forms a stable 1:1 inclusion complex; the two bipyridinium units tilt inside the cavity of CB[10] according to the X‐ray crystal structure. Finally, a supramolecular “Russian doll” was built up by threading a guest through the cavities of both blue box and CB[10].     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

Kinetics and mechanism of cyclic esters polymerisation initiated with tin(II) octoate, 4. Influence of proton trapping agents on the kinetics of ε‐caprolactone and L,L‐dilactide polymerisation

Kinetics of the polymerisation of ε‐caprolactone and L ,L ‐dilactide initiated with tin(II) 2‐ethylhexanoate (tin octoate (Sn(Oct)₂)) and carried out in the presence of 2,6‐di‐tert‐butylpyridine ( 1 ) and/or 1,8‐bis(dimethylamino)naphthalene ( 2 ), in THF as the solvent, at 80°C was studied. The rate of polymerisation of the cyclic ester in the presence of 1 or 2 , known to be a “proton trap” or “proton sponge”, respectively, is either practically the same or even exceeds that of the polymerisation conducted in the absence of these hindered amines. Consequently, the proposed earlier mechanisms of polymerisation of cyclic esters coinitiated by Sn(Oct)₂, with chain growth involving active species with “protons”, i. e. primary or secondary oxonium ions, have to be put on rest. This includes also the mechanism in which propagation was proposed to proceed within a ternary complex consisting of hydroxyl group terminated macromolecule, Sn(Oct)₂, and a cyclic ester monomer. The observed final increase of the rate of polymerization is in agreement with the interconversion previously decribed by us: Sn(Oct)₂ + ROH ⇌ OctSnOR + OctH since OctH (a carboxylic acid) is becoming complexed with a proton trap/sponge and the concentration of OctSnOR (the actual initiator) is effectively increased.     

Vinylic MIDA Boronates: New Building Blocks for the Synthesis of Aza‐Heterocycles

A two‐step synthesis of structurally diverse pyrrole‐containing bicyclic systems is reported. ortho‐Nitro‐haloarenes coupled with vinylic N‐methyliminodiacetic acid (MIDA) boronates generate ortho‐vinyl‐nitroarenes, which undergo a “metal‐free” nitrene insertion, resulting in a new pyrrole ring. This novel synthetic approach has a wide substrate tolerance and it is applicable in the preparation of more complex “drug‐like” molecules. Interestingly, an ortho‐nitro‐allylarene derivative furnished a cyclic β‐aminophosphonate motif.     

A Solution‐Processable Donor–Acceptor Compound Containing Boron(III) Centers for Small‐Molecule‐Based High‐Performance Ternary Electronic Memory Devices

A novel small‐molecule boron(III)‐containing donor–acceptor compound has been synthesized and employed in the fabrication of solution‐processable electronic resistive memory devices. High ternary memory performances with low turn‐on (V_Th1=2.0 V) and distinct threshold voltages (V_Th2=3.3 V), small reading bias (1.0 V), and long retention time (>10⁴ seconds) with a large ON/OFF ratio of each state (current ratio of “OFF”, “ON1”, and “ON2”=1:10³:10⁶) have been demonstrated, suggestive of its potential application in high‐density data storage. The present design strategy provides new insight in the future design of memory devices with multi‐level transition states.     

Soluble polybenzimidazoles with intrinsic porosity: Synthesis,structure, properties and processability

We have explored two novel comonomers, namely, 4,16‐dicarboxyl[2.2]paracyclophane and 5,5′,6,6′‐tetraamino‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobi[indane], for the synthesis of co‐polybenzimidazoles (co‐PBIs) with intrinsic porosity. Both these monomers possess twisted structures that can lead to “awkward” macromolecular shapes that cannot pack efficiently. The consequences of introducing these two monomers on the structure and properties of PBIs are reported. The random copolymers synthesized are amorphous and possess glass transition temperatures (T_gs) greater than 400 °C. T_g decreases with increasing comonomer content indicating an increase in fractional free volume. The copolymers have low surface area. TEM and BET measurements show evidence of mesopore formation. The copolymers show significant carbon dioxide adsorption. Single chain molecular dynamics simulation of 24‐mer repeat units shows intramolecular void spaces arising as a result of distorted polymer chain with reduced conformational mobility. These studies define a new synthetic strategy for “bottoms‐up” synthesis of PBIs with intrinsic porosity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1046–1057     

Expanding the Landscape of Diterpene Structural Diversity through Stereochemically Controlled Combinatorial Biosynthesis

Plant‐derived diterpenoids serve as important pharmaceuticals, food additives, and fragrances, yet their low natural abundance and high structural complexity limits their broader industrial utilization. By mimicking the modularity of diterpene biosynthesis in plants, we constructed 51 functional combinations of class I and II diterpene synthases, 41 of which are “new‐to‐nature”. Stereoselective biosynthesis of over 50 diterpene skeletons was demonstrated, including natural variants and novel enantiomeric or diastereomeric counterparts. Scalable biotechnological production for four industrially relevant targets was accomplished in engineered strains of Saccharomyces cerevisiae.     

A “quasi‐flexible” automatic docking processing for studying stereoselective recognition mechanisms. Part I. Protocol validation

The main purpose of this work is the development and validation of a general scheme based on a systematic and automatic “quasi‐flexible” docking approach for studying stereoselective recognition mechanisms. To achieve our goals we explore the conformational and configurational space for small‐ or medium‐size flexible molecules in a systematic way, seeking a method that is both reasonably accurate and relatively fast from the computational point of view. In particular, we have developed a general computational protocol for the global molecular interaction evaluation (“Glob‐MolInE”) to efficiently explore the orientational and conformational space of flexible selectors and selectands used in modern chiral high‐performance liquid chromatography (HPLC); the enantioselective binding of the selector (S)‐N‐(3,5‐dinitrobenzoyl)‐leucine‐ n‐propylamide (S)‐ 1 towards the selectand N‐(2‐naphthyl)‐alanine methyl ester 2 has been studied; the global minimum obtained for the homochiral associate [S( 1 )/S( 2 )] (Pop. >99%) is very close (RMS≃0.20) to the crystallographically determined structure. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 515–530, 2000     

Developing A “Polysulfide‐Phobic” Strategy to Restrain Shuttle Effect in Lithium–Sulfur Batteries

Inspired by hydrophobic interface, a novel design of “polysulfide‐phobic” interface was proposed and developed to restrain shuttle effect in lithium–sulfur batteries. Two‐dimensional VOPO₄ sheets with adequate active sites were employed to immobilize the polysulfides through the formation of a V?S bond. Moreover, owing to the intrinsic Coulomb repulsion between polysulfide anions, the surface anchored with polysulfides can be further evolved into a “polysulfide‐phobic” interface, which was demonstrated by the advanced time/space‐resolved operando Raman evidences. In particular, by introducing the “polysulfide‐phobic” surface design into separator fabrication, the lithium–sulfur battery performed a superior long‐term cycling stability. This work expands a novel strategy to build a “polysulfide‐phobic” surface by “self‐defense” mechanism for suppressing polysulfides shuttle, which provides new insights and opportunities to develop advanced lithium–sulfur batteries.     

Two Aluminophosphate Molecular Sieves Built from Pairs of Enantiomeric Structural Building Units

Herein we report the synthesis and structures of two new small‐pore aluminophosphate molecular sieves PST‐13 and PST‐14 with mutually connected 8‐ring channels. The structure of PST‐13, synthesized using diethylamine as an organic structure‐directing agent, contains penta‐coordinated framework Al atoms bridged by hydroxy groups and thus edge‐sharing 3‐ and 5‐rings. Upon calcination, PST‐13 undergoes a transformation to PST‐14 with loss of bridging hydroxy groups and occluded organic species. The structures of both materials consist “nonjointly” of pairs of previously undiscovered 1,5‐ and 1,6‐open double 4‐rings (d4rs) which are mirror images of each other. We also present a series of novel chemically feasible hypothetical structures built from 1‐open d4r (sti) or 1,3‐open d4r (nsc) units, as well as from these two enantiomeric structural building units.     

A Density Functional Theory (DFT) Quantum‐Chemical Approach to the Real Structure of Poly(methylaluminoxane)

DFT quantum chemical calculations have been performed in order to optimize the geometric and electronic cage structure of poly(methylaluminoxane) (MAO) with oligomerization degree n = 9–15, and to find such structures that fit most closely the existing experimental data on the MAO composition and structure. The following peculiarities of the MAO structure were found: i) In “classic” MAO (n = 9, 12, 15; Al : CH₃ : O = 1 : 1 : 1), which has a triple‐layer cage structure, the inner layer contains highly reactive Al‐O bonds. ii) The reaction between “classic MAO” and trimethylaluminium (TMA) proceeds by the concerted mechanism, with the insertion of Al‐CH₃ groups into these Al‐O bonds producing “true” MAO (Al : CH₃ : O = 1 : 1.5 : 0.75). The calculated geometric and electronic structures of “true” MAO with n = 6, 9, 12 are presented. iii) “True” MAO and “classic” MAO exist in equilibrium. The driving force for the formation of “true” MAO is the decrease in enthalpy, and of “classic” MAO the increase in entropy, in the equilibrium reaction between “classic” MAO and TMA.     

Remarkably selective recognition of iodobenzene derivatives by a macrocyclic bis-Pt(II) metallohost

We designed and synthesized self‐assembled bis‐Pt^II dimer 1? 4 BF₄ with quino[8,7‐b][1,10]phenanthroline as an extended π‐face contact area, which acts as the first artificial receptor with high affinity toward iodinated aromatic compounds significantly based on noncovalent iodine ??? aromatic‐plane interactions in a “side‐on” fashion. Despite their structural similarity to a previously reported metallohost 2 ⁴⁺ that bears 2,2′:6′,2′′‐terpyridine units, a dramatic change in selectivity toward substituted benzene derivatives was observed for 1 ⁴⁺. ¹H NMR spectroscopic titration revealed a high affinity of 1 ⁴⁺ towards haloarenes, with exceptionally large association constants for 2‐iodophenol (K_a=16 000 M ^?1) and 1,2‐diiodobenzene (K_a=21 000 M ^?1), which are 93‐ and 140‐fold higher, respectively, than the values obtained for 2 ⁴⁺. In addition, 1 ⁴⁺ showed a remarkably high affinity and selectivity toward 2,6‐diiodophenol (K_a=35 000 M ^?1), which is an important substructure of the thyroid hormone T₄. X‐ray crystallography and theoretical calculations strongly suggest that “side‐on” iodine ??? aromatic‐plane interactions and π–π stacking contribute to the strong 1,2‐diiodobenzene and 2,6‐diiodophenol binding. The results obtained here give unique and valuable insight into the nature of halogen atom interactions in their “side‐on” region with an electropositive aromatic plane, which may provide useful guidance for designing artificial receptors for iodinated biomolecules.     

Synthesis and Anti‐tumor Evaluation of Novel C‐37 Modified Derivatives of Gambogic Acid

Gambogic acid (GA, 1 ), the most prominent representative of Garcinia natural products, has been reported to be a promising anti‐tumor agent. In order to further explore the structure‐activity relationship of GA and discover novel GA derivatives as anti‐tumor agents, 17 novel C‐37 modified derivatives of GA were synthesized and evaluated for their in vitro anti‐tumor activities against A549, HCT‐116, BGC‐823, HepG2 and MCF‐7 cancer cell lines. Among them, 11 compounds were found to be more potent than GA against some cancer cell lines. Notably, compound 8 was almost 5–10 folds more active than GA against A549 and BGC‐823 cell lines with the IC₅₀ values of 0.12 µmol·L^?1 and 0.57 µmol·L^?1, respectively. Chemical modification at C‐37 position of GA by introducing of hydrophilic amines could lead to increased activity and improved drug‐like properties. These findings will enhance our understanding of the structure‐activity relationship (SAR) of GA and lead to the discovery of novel GA derivatives as potential anti‐tumor agents.     

Stereospecific Synthesis of Alkenes by Eliminative Cross‐Coupling of Enantioenriched sp3‐Hybridized Carbenoids

1‐Aryl‐1,2‐dialkylethenes were generated by a sequence of electrophilic substitution, 1,2‐metalate rearrangement, and β‐elimination initiated by the addition of enantioenriched α‐(carbamoyloxy)alkylboronates to enantioenriched lithiated carbamates. The carbenoid stereochemical pairing [i.e., “like”=(S)+(S) or “unlike”=(S)+(R)] and the elimination mechanism (syn or anti), not substituent effects, determined the configuration of the trisubstituted alkene target. For example, (Z)‐2,5‐diphenyl‐2‐pentene was produced in 70 % yield with E/Z=5:95 by a like combination of Li and B carbenoids and syn (thermal) elimination whereas the E isomer was obtained in the same yield with E/Z>98:2 by an otherwise identical process involving an unlike stereochemical pairing. The concept elaborated overcomes an intrinsic limitation of traditional strategies for direct connective alkene synthesis, which cannot realize meaningful stereochemical bias unless the alkene substituents are strongly differentiated.     

The role of protein “Stability patches” in molecular recognition: A case study of the human growth hormone‐receptor complex

Dynamic characteristics of protein surfaces are among the factors determining their functional properties, including their potential participation in protein‐protein interactions. The presence of clusters of static residues—“stability patches” (SPs)—is a characteristic of protein surfaces involved in intermolecular recognition. The mechanism, by with SPs facilitate molecular recognition, however, remains unclear. Analyzing the surface dynamic properties of the growth hormone and of its high‐affinity variant we demonstrated that reshaping of the SPs landscape may be among the factors accountable for the improved affinity of this variant to the receptor. We hypothesized that SPs facilitate molecular recognition by moderating the conformational entropy of the unbound state, diminishing enthalpy–entropy compensation upon binding, and by augmenting the favorable entropy of desolvation. SPs mapping emerges as a valuable tool for investigating the structural basis of the stability of protein complexes and for rationalizing experimental approaches, such as affinity maturation, aimed at improving it. © 2015 Wiley Periodicals, Inc.     

Randomizing the Unfolded State of Peptides (and Proteins) by Nearest Neighbor Interactions between Unlike Residues

To explore the influence of nearest neighbors on conformational biases in unfolded peptides, we combined vibrational and 2D NMR spectroscopy to obtain the conformational distributions of selected “GxyG” host–guest peptides in aqueous solution: GDyG, GSyG, GxLG, GxVG, where x/y=A, K, L, V. Large changes of conformational propensities were observed due to nearest‐neighbor interactions, at variance with the isolated pair hypothesis. We found that protonated aspartic acid and serine lose their above‐the‐average preference for turn‐like structures in favor of polyproline II (pPII) populations in the presence of neighbors with bulky side chains. Such residues also decrease the above‐the‐average pPII preference of alanine. These observations suggest that the underlying mechanism involves a disruption of the hydration shell. Thermodynamic analysis of ³J(H^N,H^α) (T) data for each x,y residue reveals that modest changes in the conformational ensemble masks larger changes of enthalpy and entropy governing the pPII?β equilibrium indicating a significant residue dependent temperature dependence of the peptides’ conformational ensembles. These results suggest that nearest‐neighbor interactions between unlike residues act as conformational randomizers close to the enthalpy–entropy compensation temperature, eliminating intrinsic biases in favor of largely balanced pPII/β dominated ensembles at physiological temperatures.     

NMR studies of polymer solutions. III. Conformational transition study of oligomeric polyethylene in mixed solvents

The intramolecular structure of oligomeric polyethylene (PE) in solvent mixtures of α-chloronaphthalene and carbon tetrachloride, α-chloronaphthalene and deuterated octane, and α-chloronaphthalene and deuterated hexadecane was studied at 35°C. by a high-resolution nuclear magnetic resonance technique. It was clearly shown that the n-alkanes show no detectable selective solvent absorption in these systems. The conformational structure (P_p), which was formed in “bulky” aromatic solvents when the chain length was greater than 16, was significantly destroyed by the presence of carbon tetrachloride, octane, or hexadecane in the above-mentioned solvent mixtures. Therefore, the “bulky” aromatic solvents, such as α-chloronaphthalene and 9-chloroanthracene, can be classified as P_p-structure-promoting solvents, in which the PE remains in the P_p conformation. In contrast, carbon tetrachloride and linear alkanes are P_m-structure-promoting solvents, in which the PE does not exhibit any P_p structure but is in the disordered P_m conformation. It is speculated that the P_p structure is caused by a “chain-fold” mechanism.