Charge profiling and stability testing of biosimilar by capillary isoelectric focusing

CIEF was developed for the rapid analysis of charge heterogeneity of trastuzumab biosimilar using commercially available fluorocarbon‐coated capillary. The CIEF master mix was composed of 0.30% w/v methyl cellulose, 2.3 M urea, 56.8 mM l ‐arginine, 1.52 mM iminodiacetic acid, 4.5% v/v carrier ampholytes (broad‐range pI 3–10 and narrow‐range pI 8–10.5 with ratio of 3:1), and 0.45% v/v 10.0, 9.5, 7.0, 5.5, 4.1 pI markers. To get a robust method to analyze charge heterogeneity, some separation parameters, including focusing time and separation temperature, were investigated and optimized. The optimized method gave good precision in estimated pI values of charge variants with RSDs of not more than 0.16% intraday analysis (n = 6) and < 0.18% interday analysis (n = 9). In addition, the applications of this method including purity, stability, lot consistency, peptide N‐glycosidase F digest, and C‐terminal lysine variants characterization were also investigated.     

Testing of the influenza virus purification by CIEF

In virological practice, the pre‐concentration, purification and subsequent determination of the purity and concentration of the viruses from the cultural medium and/or from the real sample are required. The conventional techniques used today are equipment demanding, time‐consuming and laborious. In this study, the CIEF of influenza viruses with UV detection has been developed and subsequently used to test the purification of the virus from the biological samples. The equine and swine influenza viruses present in infected allantoic fluid of specific pathogen free embryonated chicken eggs were precipitated by using PEG 6000 and sodium chloride. The precipitated viruses were centrifuged at 14 000×g, and the impurities of different densities were removed by using the sucrose gradients. The efficiency of the virus purification technique was examined by the CIEF and compared to the results of real‐time PCR. The pIs of both influenza viruses were determined. Simultaneously, the CIEF was found to be a suitable method for the rapid testing of the efficiency of the virus purification.     

A New Fluorescein Isothiocyanate-Piperidine Self-ordered Ring Phosphorescent Probe for the Determination of Trace Protein

The ? COOH in fluorescein isothiocyanate (FITC) reacted with ? NH? in piperidine (P) to form FITC‐P on the center of indentation of polyamide membrane (PAM) when drying for 2 min at (92±1)°C. Then, the FITC‐P diffused outward from the indentation center and formed the round SOR‐P‐FITC (containing the FITC‐P self‐ordered rings). Thus, multi‐FITC accumulated on SOR‐P‐FITC, leading to the enhancement of RTP signal on bio‐target, whose I_p increased 2.0 times compared with non‐generated SOR. When bovine serum albumin (BSA) was added to the center of SOR‐P‐FITC, ? NCS of FITC in SOR‐P‐FITC reacted with ? NH₂ of BSA to form SOR‐P‐FITC‐BSA, which caused the RTP signal of FITC to enhance sharply. The ΔI_p of the system was 3.4 times higher than that without β‐CD and 4.0 times higher than that without SOR‐P‐FITC formed. Its ΔI_p was linear to the content of BSA. Therefore, a new solid substrate‐room temperature phosphorimetry (SS‐RTP) for the determination of trace protein was established using SOR‐P‐FITC as a phosphorescent probe. Under the optimum condition, the linear range of this method was 0.040–16.0 ag·spot^?1 with a detection limit (LD) of 8.5 zg·spot^?1 (0.40 µL sample solution per spot, the corresponding concentration was 2.1×10^?17 g·mL^?1), and the regression equation of working curve was ΔI_p=3.848+4.240m_BSA (ag·spot^‐1), n=6, correlation coefficient (r) was 0.9993. This method with high sensitivity had been applied to determining the content of trace protein in the water samples, and the results coincided well with those obtained with pyrocatechol violet‐Mo(VI) method (P.V.M.M.). At the same time, the mechanism of SS‐RTP using SOR‐P‐FITC as a phosphorescent probe (SOR‐P‐FITC‐SS‐RTP) was discussed.     

CE‐ESI‐MS coupled with dynamic pH junction online concentration for analysis of peptides in human urine samples

In this article, an approach has been developed for the analysis of some small peptides with similar pI values by CE‐ESI‐MS based on the online concentration strategy of dynamic pH junction. The factors affected on the separation, detection and online enrichment, such as BGE, injection pressure, sheath flow liquid and separation voltage have been investigated in detail. Under the optimum conditions, i.e. using 0.5 mol/L formic acid (pH 2.15) as the BGE, preparing the sample in 50 mM ammonium acetate solution (pH 7.5), 50 mbar of injection pressure for 300 s, using 7.5 mM of acetic acid in methanol–water (80% v/v) solution as the sheath flow liquid and 20 kV as the separation voltage, four peptides with similar pI values, such as L ‐Ala‐L ‐Ala (pI=5.57), L ‐Leu‐D ‐Leu (pI=5.52), Gly‐D ‐Phe (pI=5.52) and Gly‐Gly‐L ‐Leu (pI=5.52) achieved baseline separation within 18.3 min with detection limits in the range of 0.2–2.0 nmol/L. RSDs of peak migration time and peak area were in the range of 1.45–3.57 and 4.93–6.32%, respectively. This method has been applied to the analysis of the four peptides in the spiked urine sample with satisfactory results.     

Kristallzüchtung und Strukturbestimmung eines metallorganischen Donator/Akzeptor‐Komplexes von I2C=CI2

Crystallization and Structure Determination of an I₂C=CI₂ organometallic Donor/Acceptor Complex The rectangular D_2h molecule I₂C=CI₂ contains 95.5% iodine with the rather bulky I substituents hiding the CC‐π‐system and heavily penetrating each other [1]. Starting both from the structure determination of a sublimed novel P2₁/n polymorph and extensive DFT calculations, numerous hitherto unknown donor/acceptor complexes of I₂C=CI₂ have been crystallized and structurally characterized [2]. Here we report the first adduct of tetraiodoethylene to a metalorganic complex, {[Pb²⁺(18‐crown‐6)(I^–)₂]…I₂C=CI₂}, crystallized from lead(18‐crown‐6)diiodide and I₂C=CI₂ in chloroform. The structure consists of polymer chains with angles ∢IPbI of 159° and distances I^–…I₂C=CI₂ between 348 to 359 pm. Both the 18‐crown‐6 ligand and the chloroform solvent molecule included in the crystal are considerably disordered. Space group Pnma (IT Nr. 62), Z = 4, lattice dimensions at 150 K, a = 1724.2(2), b = 1416.4(2), c = 1330.8(2), V = 3250.0(8) · 10⁶ pm³, R = 0.0428.     

Conformation of comb‐like liquid crystal polymers in isotropic solution probed by small‐angle neutron scattering

The conformational characteristics of a comb‐like side‐chain liquid crystal polysiloxane (SCLCP), dissolved in deuterated chloroform, were evaluated by small‐angle neutron scattering (SANS) measurements over a wide q range. SANS studies were carried out on specimens with constant backbone length (DP = 198) and variable spacer length (n = 3, 5, and 11), and with constant spacer length (n = 5) and variable DP (45, 72, 127, and 198). The form factor P(q) at high q was analyzed using the wormlike chain model with finite cross‐sectional thickness (R_c) and taking into account the molecular weight polydispersity. The analysis generated values of persistence length in the range l_p = 28–32 Å, considerably larger than that of the unsubstituted polysiloxane chain (l_p = 5.8 Å), with contour lengths per monomer comparable to the fully‐extended polysiloxane backbone (l_m = 2.9 Å). This indicates a relatively rigid SCLCP chain due to the influence of the densely attached mesogenic groups. The SCLCP with n = 11 is more flexible (l_p = 28 Å) than those with n = 3 and n = 5 (l_p = 32 Å). The cross‐sectional thickness increases with spacer length, R_c ～ n^0.21±0.02 (3 ≤ n ≤ 11), and the contour length per monomer decreases with increasing spacer length, l_m ～ n^?0.35±0.01. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2412–2424, 2006     

Determination of N‐nitrosamines by automated dispersive liquid–liquid microextraction integrated with gas chromatography and mass spectrometry

An automated dispersive liquid–liquid microextraction integrated with gas chromatography and mass spectrometric procedure was developed for the determination of three N‐nitrosamines (N‐nitroso‐di‐n‐propylamine, N‐nitrosopiperidine, and N‐nitroso di‐n‐butylamine) in water samples. Response surface methodology was employed to optimize relevant extraction parameters including extraction time, dispersive solvent volume, water sample pH, sodium chloride concentration, and agitation (stirring) speed. The optimal dispersive liquid–liquid microextraction conditions were 28 min of extraction time, 33 μL of methanol as dispersive solvent, 722 rotations per minute of agitation speed, 23% w/v sodium chloride concentration, and pH of 10.5. Under these conditions, good linearity for the analytes in the range from 0.1 to 100 μg/L with coefficients of determination (r²) from 0.988 to 0.998 were obtained. The limits of detection based on a signal‐to‐noise ratio of 3 were between 5.7 and 124 ng/L with corresponding relative standard deviations from 3.4 to 5.9% (n = 4). The relative recoveries of N‐nitroso‐di‐n‐propylamine, N‐nitrosopiperidine, and N‐nitroso di‐n‐butylamine from spiked groundwater and tap water samples at concentrations of 2 μg/L of each analyte (mean ± standard deviation, n = 3) were (93.9 ± 8.7), (90.6 ± 10.7), and (103.7 ± 8.0)%, respectively. The method was applied to determine the N‐nitrosamines in water samples of different complexities, such as tap water, and groundwater, before and after treatment, in a local water treatment plant.     

Protolytic properties and complexation with copper(II) ions of some azo derivatives of β-arylaminopropionic acids

The azo coupling reaction of N-(2-carboxyethyl)anthranilic acid and N,N,N′,N′-tetrabis(2-carboxyethyl)-1,3-phenylenediamine with diazosulfanilic acid yielded the complexones sodium 4-N-(2-carboxyethyl)amino-5-carboxyazobenzene-4′-sulfonate (I) and 2,4-N,N,N′,N′-tetrabis(2-carboxyethyl)diaminoazobenzene-4′-sulfonic acid (II), respectively. The acidity constants of I and II (20°C, μ = 0.1M KCl) were determined to be as follows: for I, pK ₀₀ = 1.29 ± 0.13, pK ₀ = 2.92 ± 0.07, pK ₁ = 3.92 ± 0.05, pK ₂ = 5.16 ± 0.03; for II, pK ₀₀ = 2.35 ± 0.06, pK ₀ = 2.81 ± 0.09, pK ₁ = 3.21 ± 0.11, pK ₂ = 3.81 ± 0.09, pK ₃ = 4.34 ± 0.04, pK ₄ = 5.03 ± 0.06, pK ₅ = 6.67 ± 0.07. The electronic absorption spectra of I and II were measured, and acid-base equilibrium scheme for I and II in aqueous solutions were suggested. The complexation constants of I and II with copper(II) ions were determined to be logK _CuQ^I= 5.47 ± 0.06 and logK _CuQ^II= 5.72 ± 0.13 (20°C, μ = 0.1 M KCl).     

Solid Substrate Room Temperature Phosphorimetry for the Determination of Trace Mercury Based on the Reaction between Alkaline Phosphatase and Mercury Using Triton X-100 as a Sensitizer

A new solid substrate room temperature phosphorimetry (SSRTP) for the determination of trace mercury has been established, using Triton X‐100 as a sensitizer. The regression equation of working curve was ΔI_p=11.40m(Hg²⁺)+1.569 (ag·spot^?1, n=6, ΔI_p=I_p1?I_p2, I_p1 and I_p2 referred to the phosphorescence intensity of the blank reagent and the test solution, respectively), and correlation coefficient (r) was 0.9984. The RSD valus of the determination of 0.016 and 8.0 ag·spot^?1 Hg²⁺ were 4.1% and 1.7% (n=8), respectively, indicating that the method had good repeatability. The limit of detection (LOD) calculated by 3Sb/k was 7.0 zg·spot^?1 Hg²⁺ (corresponding concentration: 1.8×10^?17 g·mL^?1, Sb=0.025, n=11). This method has high sensitivity, selectivity and precision, which was applied to determination of trace mercury in water samples with the result being agreed very well with that of dithizone extraction spectrophotometry.     

Kinetics and mechanism of the reactions of n‐butanal and n‐pentanal with chlorine atoms

The kinetics and mechanism of the reaction of chlorine atoms with n‐butanal and n‐pentanal have been investigated in a 142‐L reaction cell coupled to a Fourier transform infrared (FTIR) spectrometer at 298 ± 2 K and at 800 ± 3 Torr. The rate coefficients for Cl + n‐butanal and Cl + n‐pentanal were measured using the relative rate technique with isopropanol and ethene as the reference compounds. The yield of acyl radicals was determined by measuring yields of acid chloride and carbon monoxide products from the reaction of Cl + aldehyde in the absence of oxygen. The rate coefficients for Cl + n‐butanal and Cl + n‐pentanal are (1.63 ± 0.59) × 10^?10 cm³ molecule^?1 s^{? 1} and (2.37 ± 0.82) × 10^?10 cm³ molecule^?1 s^?1, respectively. The yields of acyl radicals from the reactions are 0.66 ± 0.04 for n‐butanal and 0.45 ± 0.04 for n‐pentanal. Under ambient conditions, the acyl radicals generated will react almost exclusively with oxygen. Mechanistic implications of these measurements are discussed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 133–141, 2009     

Kinetic and Mechanisms of the Homogeneous,Unimolecular Elimination of Phenyl Chloroformate and p‐Tolyl Chloroformate in the Gas Phase

The gas‐phase elimination of phenyl chloroformate gives chlorobenzene, 2‐chlorophenol, CO₂, and CO, whereasp‐tolyl chloroformate produces p‐chlorotoluene and 2‐chloro‐4‐methylphenol CO₂ and CO. The kinetic determination of phenyl chloroformate (440–480^oC, 60–110 Torr) and p‐tolyl chloroformate (430–480°C, 60–137 Torr) carried out in a deactivated static vessel, with the free radical inhibitor toluene always present, is homogeneous, unimolecular and follows a first‐order rate law. The rate coefficient is expressed by the following Arrhenius equations: Phenyl chloroformate: Formation of chlorobenzene, log k_I = (14.85 ± 0.38) – (260.4 ± 5.4) kJ mol^?1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chlorophenol, log k_II = (12.76 ± 0.40) – (237.4 ± 5.6) kJ mol^?1(2.303RT)^?1; r = 0.9993 p‐Tolyl chloroformate: Formation of p‐chlorotoluene: log k_I = (14.35 ± 0.28) – (252.0 ± 1.5) kJ mol^–1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chloro‐4‐methylphenol, log k_II = (12.81 ± 0.16) – (222.2 ± 0.9) kJ mol^?1(2.303RT)^–1; r = 0.9995 The estimation of the k_I values, which is the decarboxylation process in both substrates, suggests a mechanism involving an intramolecular nucleophilic displacement of the chlorine atom through a semipolar, concerted four‐membered cyclic transition state structure; whereas the k_II values, the decarbonylation in both substrates, imply an unusual migration of the chlorine atom to the aromatic ring through a semipolar, concerted five‐membered cyclic transition state type of mechanism. The bond polarization of the C–Cl, in the sense C^{δ+ …} Cl^δ?, appears to be the rate‐determining step of these elimination reactions.     

Assembled synthesis of luminescent mono/double‐layered 2D and 3D Zn (II)‐based coordination polymers tuned by flexible bis (pyridyl)propane‐1,2‐diamines and diverse organic dicarboxylates

Six mono/double‐layered 2D and three 3D coordination polymers were synthesized by a self‐assembly reaction of Zn (II) salts, organic dicarboxylic acids and L1/L2 ligands. These polymeric formulas are named as [Zn(L1)(C₄H₂O₄)_0.5 (H₂O)]_n·0.5n(C₄H₂O₄)·2nH₂O ( 1 ), [Zn₂(L2)(C₄H₂O₄)₂]_n·2nH₂O ( 2 ), [Zn(L1)(m‐BDC)]_n ( 3 ), [Zn₂(L2)(m‐BDC)₂]_n·2nH₂O ( 4 ), [Zn₃(L1)₂(p‐BDC)₃(H₂O)₄]_n·2nH₂O ( 5 ), [Zn₂(OH)(L2) (p‐BDC)_1.5]_n ( 6 ), [Zn₂(L1)(p‐BDC)₂]_n·5nH₂O ( 7 ), [Zn₂(L2)(p‐BDC)₂]_n·3nH₂O ( 8 ) and [Zn₂(L1)(C₄H₄O₄)_1.5(H₂O)]_n·n(ClO₄)·nH₂O ( 9 ) [L1 = N,N′‐bis (pyridin‐4‐ylmethyl)propane‐1,2‐diamine, L2 = N,N′‐bis (pyridin‐3‐ylmethyl)propane‐1,2‐ diamine, m‐BDC^2? = m‐benzene dicarboxylate, p‐BDC^2? = p‐benzene dicarboxylate]. Meanwhile, these polymers have been characterized by elemental analysis, infrared, thermogravimetry (TG), photoluminescence, powder and single‐crystal X‐ray diffraction. Polymers 1–6 present mono‐ and double (4,4)‐layer motifs accomplished by L1/L2 ligands with diverse conformations and organic dicarboxylates, and the layer thickness locates in the range of 5.8–15.0 Å. In three 3D polymers, the L1 and L2 molecules adopt the same cis‐conformations and join adjacent Zn (II) cations together with p‐BDC^2? or succinate, giving rise to different binodal (4,4)‐c nets with (4.5².8³)(4.5³.7²) ( 7 ), pts ( 8 ) topology and twofold interpenetrated binodal (5,5)‐c nets with (3².4⁴.5².6²)(3.4³.5².6⁴) ( 9 ). Therefore, the diverse conformations of the two bis (pyridyl)‐propane‐1,2‐diamines and the feature of different organic dicarboxylate can effectively influence the architectures of these polymers. Powder X‐ray diffraction patterns demonstrate that these bulk solid polymers are pure phase. TG analyses indicate that these polymers have certain thermal stability. Luminescent investigation reveals that the emission maximum of these polymers varies from 402 to 449 nm in the solid state at room temperature. Moreover, 1 , 3 and 5–8 show average luminescence lifetimes from 8.81 to 16.30 ns.     

Three Distinct Silver(I) Coordination Polymers: Bridging‐­Ligand Directed Syntheses,Crystal Structures,Luminescence, and Nitrobenzene Sensing Properties

Three distinct Ag^I‐DMAP [DMAP = 4‐(dimethylamino)pyridine] coordination polymers [Ag₂I₂(DMAP)₂]_n ( 1 ), [Ag₂(CN)₂(DMAP)_2.5 · DMAP]_n ( 2 ), and [Ag(SCN)(DMAP)]_n ( 3 ) were constructed by monatomic I^–, diatomic CN^–, and triatomic SCN^– bridges, respectively. 1 – 3 were determined by FT‐IR spectroscopy, elemental analyses, TGA, powder and single‐crystal X‐ray diffraction. 1 exhibits a 1D wavelike chain structure, sustained by 3‐connected I^– bridges, whereas 2 shows a unique 1D single‐ and double‐strand alternating chain, supported by 3‐connected CN^– bridges. Compound 3 has a 2D 3‐connected network architecture, fabricated by 3‐connected SCN^– bridges, and exhibits a (4 · 8²) topology. The luminescence and nitrobenzene sensing properties of 1 – 3 were explored in 2‐propanol suspensions, which revealed that compounds 1 – 3 exhibit DMAP originated luminescence emissions and are highly sensitive for nitrobenzene detection.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalysen der Tetrahalogeno‐bis‐Pyridin‐Osmium(III)‐Komplexe cis‐(n‐Bu4N)[OsCl4Py2] und trans‐(n‐Bu4N)[OsX4Py2], X = Cl,Br

Synthesis, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analyses of the Tetrahalogeno‐bis‐Pyridine‐Osmium(III) Complexes cis ‐( n ‐Bu₄N)[OsCl₄Py₂] and trans ‐( n ‐Bu₄N)[OsX₄Py₂], X = Cl, Br By reaction of (n‐Bu₄N)₂[OsX₆], X = Cl, Br, with pyridine and (n‐Bu₄N)[BH₄] tetrahalogeno‐bis‐pyridine‐osmium(III) complexes are formed and purified by chromatography. X‐ray structure determinations on single crystals have been performed of cis‐(n‐Bu₄N)[OsCl₄Py₂] ( 1 ) (triclinic, space group P1, a = 9.4047(9), b = 10.8424(18), c = 17.007(2) Å, α = 71.833(2), β = 81.249(10), γ = 67.209(12)°, Z = 2), trans‐(n‐Bu₄N)[OsCl₄Py₂] ( 2 ) (orthorhombic, space group P2₁2₁2₁, a = 8.7709(12), b = 20.551(4), c = 17.174(4) Å, Z = 4) and trans‐(n‐Bu₄N)[OsBr₄Py₂] ( 3 ) (triclinic, space group P1, a = 9.132(3), b = 12.053(3), c = 15.398(2) Å, α = 95.551(18), β = 94.12(2), γ = 106.529(19)°, Z = 2). Based on the molecular parameters of the X‐ray structure determinations and assuming C₂ point symmetry for the anion of 1 and D_2h point symmetry for the anions of 2 and 3 the IR and Raman spectra are assigned by normal coordinate analysis. The valence force constants of 1 are in the Cl–Os–Cl axis f_d(OsCl) = 1.58, in the asymmetrically coordinated N′–Os–Cl ^· axes f_d(OsCl ^· ) = 1.45, f_d(OsN′) = 2.48, of 2 f_d(OsCl) = 1.62, f_d(OsN) = 2.42 and of 3 f_d(OsBr) = 1.39 and f_d(OsN) = 2.34 mdyn/Å.     

Characterization of the Surface Redox Process of Adsorbed Cercosporin (CER) at Glassy Carbon Electrodes by Anodic Stripping Square‐Wave Voltammetry

The adsorptive accumulation of cercosporin (CER) at glassy carbon electrodes is studied by square‐wave voltammetry (SWV). The Freundlich adsorption isotherm resulted in being the best one to describe the specific interaction of CER with glassy carbon electrodes by using a fitting procedure of experimental fractional surface coverage vs. the CER bulk concentration (c*_CER). SWV was also used to generate Q vs. c*_CER and I_{p, n}. vs. c*_CER calibration plots from pure commercial reagent solutions. Theoretical detection limits of 1.8×10^?7 and 9.7×10^?8 M were calculated from Q. vs. c*_CER and I_{p, n} vs. c*_CER plots, respectively. The lowest concentration value measured experimentally from calibration plots performed at a f =40 Hz for a signal to noise ratio of 2 : 1 was 3.7×10^?8 M, being this value two orders of magnitude smaller than that obtained previously by us from the diffusion controlled CER reduction peak. I_{p, n}./f vs. f plots from SW voltammograms performed at different c*_CER as well as different accumulation times showed the so‐called “quasi‐reversible maxima”. A splitting of the voltammetric peak was also observed by increasing the SW amplitude at a given frequency. A value of (?0.260±0.011) V was determined for the formal potential of the adsorbed redox couple from the split voltammetric peak. A full characterization of the surface redox process was obtained by applying the methods of the “quasi‐reversible maximum” and the “split SW peak”. In 1 M HClO₄ aqueous solution, the formal rate constant and the anodic transfer coefficient were (3.5±0.5)×10² s^?1 and (0.50±0.03), respectively. Besides, the number of electrons exchanged during the redox reaction was calculated as n≈1.     

Standard Enthalpies of Formation for Solid Complexes of Chromium Chloride with L—α—Amino Acids

ＩｎｔｒｏｄｕｃｔｉｏｎＧＴＦ ,ｔｈｅｉｎｄｉｓｐｅｎｓａｂｌｅｃｏｆａｃｔｏｒｏｆｉｎｓｕｌｉｎ ,ｉｓａｃｏｍｐｌｅｘｆｏｒｍｅｄｂｅｔｗｅｅｎａｍｉｎｏａｃｉｄ ,ｎｉａｃｉｎａｎｄｃｈｒｏｍｉ ｕｍ .Ｉｎｓｕｌｉｎｄｏｅｓｎｏｔｋｅｅｐｔｈｅｎｏｒｍａｌｓｕｇａｒｍｅｔａｂｏｌｉｃｕｎ ｌｅｓｓＧＴＦｈａｓａｆｆｉｎｉｔｙｆｏｒｉｔｓｃｏｍｐｌｅｘ .1Ｔｈｕｓ ,ｉｔｉｓｄｅｓｉｒ ａｂｌｅｔｏｈａｖｅａｇｏｏｄｕｎｄｅｒｓｔａｎｄｉｎｇｏｆｃｏｏｒｄｉｎａｔｉｏｎｂｅｈａｖｉｏｒｏｆｃｈｒｏｍｉ…     

Spectroscopic study of protonation of oligonucleotides containing adenine and cytosine

Acidobasic properties of purine and pyrimidine bases (adenine, cytosine) and relevant nucleosides (adenosine, cytidine) were studied by means of glass-electrode potentiometry and the respective dissociation constants were determined under given experimental conditions (I = 0.1 M (NaCl), t = (25.0 ± 0.1) °C): adenine (pK _HL = 9.65 ± 0.04, pK _H2L = 4.18 ± 0.04), adenosine (pK _H2L = 3.59 ± 0.05), cytosine (pK _H2L = 4.56 ± 0.01), cytidine (pK _H2L = 4.16 ± 0.02). In addition, thermodynamic parameters for bases: adenine (ΔH ⁰ = (−17 ± 4) kJ mol⁻¹, ΔS ⁰ = (23 ± 13) J K⁻¹ mol⁻¹), cytosine (ΔH ⁰ = (−22 ± 1) kJ mol⁻¹, ΔS ⁰ = (13 ± 5) J K⁻¹ mol⁻¹) were calculated. Acidobasic behavior of oligonucleotides (5′CAC-CAC-CAC3′ = (CAC)₃, 5′AAA-CCC-CCC3′ = A₃C₆, 5′CCC-AAA-CCC3′ = C₃A₃C₃) was studied under the same experimental conditions by molecular absorption spectroscopy. pH-dependent spectral datasets were analyzed by means of advanced chemometric techniques (EFA, MCR-ALS) and the presence of hemiprotonated species concerning (C⁺-C) a non-canonical pair (i-motif) in titled oligonucleotides was proposed in order to explain experimental data obtained according to literature.     

Radical heterogeneous polymerization behavior of N‐methyl‐α‐fluoroacrylamide in benzene

The polymerization of N‐methyl‐α‐fluoroacrylamide (NMFAm) initiated with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was studied kinetically and with electron spin resonance. The polymerization proceeded heterogeneously with the highly efficient formation of long‐lived poly(NMFAm) radicals. The overall activation energy of the polymerization was 111 kJ/mol. The polymerization rate (R_p) at 50 °C is given by R_p = k[MAIB]^0.75±0.05 [NMFAm]^0.44±0.05. The concentration of the long‐lived polymer radical increased linearly with time. The formation rate (R_p?) of the long‐lived polymer radical at 50 °C is expressed by R_p? = k[MAIB]^1.0±0.1 [NMFAm]^0±0.1. The overall activation energy of the long‐lived radical formation was 128 kJ/mol, which agreed with the energy of initiation (129 kJ/mol), which was separately estimated. A comparison of R_p? with the initiation rate led to the conclusion that 1‐methoxycarbonyl‐1‐methylethyl radicals (primary radicals from MAIB), escaping from the solvent cage, were quantitatively converted into the long‐lived poly(NMFAm) radicals. Thus, this polymerization involves completely unimolecular termination due to polymer radical occlusion. ¹H NMR‐determined tacticities of resulting poly(NMFAm) were estimated to be rr = 0.34, mr = 0.48, and mm = 0.18. The copolymerization of NMFAm(M₁) and St(M₂) with MAIB at 50 °C in benzene gave monomer reactivity ratios of r₁ = 0.61 and r₂ = 1.79. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2196–2205, 2001     

Synthesis of sugar‐based macromolecules via sono‐ATRP in miniemulsion

Ultrasound‐mediated atom transfer radical polymerization (sono‐ATRP) in miniemulsion media is used for the first time for the preparation of complex macromolecular architectures by a facile two‐step synthetic route. Initially, esterification reaction of sucrose or lactulose with α‐bromoisobutyryl bromide (BriBBr) is conducted to receive multifunctional ATRP macroinitiators with 8 initiation sites, followed by polymerization of n‐butyl acrylate (BA) forming arms of the star‐like polymers. The brominated lactulose‐based molecule was examined as an ATRP initiator by determining the activation rate constant (k_a) of the catalytic process in the presence of a copper(II) bromide/tris(2‐pyridylmethyl)amine (Cu^IIBr₂/TPMA) catalyst in both organic solvent and for the first time in miniemulsion media, resulting in k_a = (1.03 ± 0.01) × 10⁴ M^?1 s^?1 and k_a = (1.16 ± 0.56) × 10³ M^?1 s^?1, respectively. Star‐like macromolecules with a sucrose or lactulose core and poly(n‐butyl acrylate) (PBA) arms were successfully received using different catalyst concentration. Linear kinetics and a well‐defined structure of synthesized polymers reflected by narrow molecular weight distribution (M_w/M_n = 1.46) indicated 105 ppm wt of catalyst loading as concentration to maintain controlled manner of polymerization process. ¹H NMR analysis confirms the formation of new sugar‐inspired star‐shaped polymers.     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.