Determination of ammonium,calcium, magnesium,potassium and sodium in drinking waters by capillary zone electrophoresis on a column-coupling chip

This work deals with simultaneous determination of ammonium, calcium, magnesium, sodium and potassium in drinking waters by capillary zone electrophoresis (CZE) on a column-coupling (CC) chip with suppressed hydrodynamic and electroosmotic transports. CZE separations were carried out in a propionate background electrolyte at a low pH (3.2) containing 18-crown-6-ether (18-crown-6) to reach a complete resolution of the cations. In addition, triethylenetetramine (TETA) coated the inner wall surface of the chip channels. The concentration limits of detection (cLOD) for the studied cations ranged from 4.9 to 11.5 μg/l concentrations using a 900 nl volume of the sample injection channel. 93–106% recoveries of the cations in drinking waters indicate a good predisposition of the present method to provide accurate analytical results.     

Palladium‐Catalyzed Ligand‐Free C‐N Coupling Reactions: Selective Diheteroarylation of Amines with 2‐Halobenzimidazoles

2‐Aminobenzimidazoles are widely present in a number of bioactive molecules. Generally, the preparation of these molecules could be realized by the mono‐substitution of 2‐halobenzimidazoles with amines. However, rare examples were reported for the di‐substituted products and the selectivity of mono‐ vs. di‐substitution was relatively low. Considering the potential values of the di‐substituted products, we accomplished the first selective diheteroarylation of amines with 2‐halobenzimidazoles. Notably, this Pd‐catalyzed transformation was realized under ligand‐free conditions. Accordingly, numerous target products were efficiently produced from various aromatic or aliphatic amines and 2‐halobenzimidazoles. It was worth noting that two representative products were further confirmed by X‐ray crystallography. More significantly, this catalytic process could be applied to the synthesis and discovery of new bioactive compounds, which demonstrated the synthetic usefulness of this newly developed approach.     

Enantioselective separation of chiral vicinal diols in capillary electrophoresis using a mono‐6A‐aminoethylamino‐β‐cyclodextrin as a chiral selector

This paper describes an improved access to mono‐6^A‐aminoethylamino‐β‐CD (β‐CDen), a very efficient cationic chiral selector for CZE in the separation of eight chiral aromatic vicinal diols. The β‐CDen concentration has a strong influence on the efficiency of enantioseparation. The effects of the pH and concentration of the BGE, the capillary temperature, and the applied voltage on the resolution and separation selectivity have been studied. Excellent chiral resolution was achieved under the optimal conditions of β‐CDen 10 mM, pH 10, 200 mM borate buffer at 15 kV and 20°C within 20 min. Moreover, the developed method was successfully applied to the determination of the enantiomeric purity of the catalytic asymmetric dihydroxylation (AD) reaction products.     

One‐Pot Synthesis of Some Dynamic 2‐Substituted Benzoxazinones and Their Corresponding Qinazolinones of Anticipated Biological Activity

Reactions of 6‐bromo‐2‐isopropyl‐4(3H)‐3,1‐benzoxazin‐4‐one toward mono‐ and di‐dentate nitrogen nucleophiles, e.g. primary aliphatic and aromatic amines, 1,2‐phenylenediamine, hydrazine hydrate, and formamide, have been investigated and afford the corresponding quinazolinones which are expected to have some interesting biological activity. The behavior of 3, 1‐benzoxazin‐4‐one toward active methylene compounds, namely, acetylacetone in basic medium has been studied and gave 3‐acetylquinoline. The last reaction is considered as an illustrative model of heterocyclic transformation reactions.     

Investigation of the effect of ionic strength of Tris-acetate background electrolyte on electrophoretic mobilities of mono-, di-, and trivalent organic anions by capillary electrophoresis

The effect of ionic strength of the background electrolyte (BGE) composed of tris(hydroxymethyl)aminomethane (Tris) and acetic acid on the electrophoretic mobility of mono-, di- and trivalent anions of aliphatic and aromatic carboxylic and sulfonic acids was investigated by capillary zone electrophoresis (CZE). Actual ionic mobilities of the above anions were determined from their CZE separations in Tris-acetate BGEs of pH 8.1 to 8.2 in the 3 to 100 mM ionic strength interval at constant temperature (25 degrees C). It was found that the ionic strength dependence of experimentally determined actual ionic mobilities does not follow the course supposed by the classical Onsager theory. A steeper decrease of actual ionic mobilities with the increasing ionic strength of BGE and a higher estimated limiting mobility of the anions than that found in the literature could be attributed to the specific behavior of the Tris-acetate BGEs. Presumably, not only a single type of interaction of anionic analytes with BGE constituents but rather the combination of effects, such as ion association or complexation equilibria, seems to be responsible for the observed deviation of the concentration dependence of the actual ionic mobilities from the Onsager theory. Additionally, several methods for the determination of limiting ionic mobilities from CZE measured actual ionic mobilities were evaluated. It turned out that the determined limiting ionic mobilities significantly depend on the calculation procedure used.     

Catalysis of the hydrolysis of di(p-nitrophenyl) methylphosphonate by polyamines

Conclusions The kinetics of the hydrolysis of di(p-nitrophenyl)methylphosphonate in aqueous solutions of triethylenetetramine and tetraethylenepentamine have been studied at various pH values. The catalytic rate constants for the neutral and monoprotonated forms of the polyamines are represented by the Brønsted equation as with the primary aliphatic amines and for the diprotonated forms they are represented together with the secondary aliphatic amines.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 756–759, April, 1987.     

Capillary electrophoresis of organic cations at high salt concentrations

At concentrations of 100 mM or higher the chemical nature of both the cation and anion in the background electrolyte (BGE) can be varied to manipulate the migration times of protonated aniline cations. Significant differences were noted with Li+, Na+ and K+ for capillary electrophoretic runs carried out at pH 3. However, much greater differences in migration times were observed at acidic pH values when the BGE contained protonated cations of aliphatic amines. Analyte migration became progressively slower in the series: methylamine, diethylamine, diethylamino ethanol and triethylamine. A major part of this effect was attributed to an opposing electroosmotic flow (EOF) resulting from a positively-charged coating of the capillary surface with the amine cations in the BGE via a dynamic equilibrium. The amine cations also interact in solution with the analyte ions to reduce their electrophoretic mobilities. Migration times of anilines could be varied systematically over a broad range according to the BGE amine cation selected. Excellent separations of seven closely-related anilines were obtained with the new system.     

Determination of different classes of amines with capillary zone electrophoresis and contactless conductivity detection

The use of contactless conductivity detection for the determination of different organic amines in CE was successfully demonstrated. Aliphatic non UV-absorbing species could be determined along absorbing compounds by measuring the conductivity of their protonated forms. The species tested included short-chained aliphatic primary, secondary and tertiary amines, branched aliphatic amines, diamines, hydroxyl-substituted amines as well as species incorporating aromatic and non-aromatic cyclic moieties. Highest sensitivity was obtained with BGE solutions containing solely acetic acid. A concentration of 0.5 M at a pH value of 2.5 was used. Detection limits were in the order of 1 microM. Complete separation of cis- and trans-1,2-diaminocyclohexane could be achieved by adding 18-crown-6 as modifier to the electrolyte solution.     

Static adsorptive coating of poly(methyl methacrylate) microfluidic chips for extended usage in DNA separations

A simple and robust static adsorptive (dynamic) coating process using 2% hydroxyethylcellulose was developed for surface modification of poly(methyl methacrylate) (PMMA) microfluidic chips for DNA separations, suitable for usage over extended periods, involving hundreds of runs. The coating medium was also used as a sieving matrix for the DNA separations following the coating process. Four consecutive static treatments, by simply filling the PMMA chip channels with sieving matrix once every day, were required for obtaining a stable coating and optimum performance. The performance of the coated chips at different phases of the coating process was studied by consecutive gel electrophoretic separations with LIF detection using a PhiX-174/HaeIII DNA digest sample. The coated chip, with daily renewal of the sieving matrix, showed high stability in performance during a 25-day period of systematic study, involving more than 100 individual runs. The performance of the coated chip also remained almost the same after 3 months of continuous usage, during which over 200 separations were performed. The average precision of migration time for the 603-bp fragment was 1.31% RSD (n = 6) during the 25-day study, with a separation efficiency of 6.5 x 10(4) plates (effective separation length 5.4 cm).     

毛细管区带电泳法研究肾上腺素类药物的手性分离

使用β－环糊精（β－ＣＤ）及β－ＣＤ－羧甲基（ＣＭ－β－ＣＤ）作为手性选择剂,采用毛细管区带电泳法（ＣＺＥ）对去甲肾上腺素、肾上腺素和异丙肾上腺素的手性分离进行了研究。对影响这类药物手性分离的主要因素〔手性选择剂、背景电解质（ＢＧＥ）、分离体系的酸度和温度〕进行了讨论,并对手性识别机理进行了探讨。     

DNA fragment separations by on‐line combination of capillary isotachophoresis–capillary zone electrophoresis with UV detection

A high‐speed DNA fragment separation system based on an on‐line combination of capillary ITP with CZE (CITP‐CZE) and using UV detection at 260 nm was developed. A novel CITP‐CZE buffer system of pH 6.1 was designed for the separation of ten DNA fragments with sizes ranging from 100 to 1000 bp. An effect of underivatized α‐, β‐ and γ‐cyclodextrins on the resolution of DNA fragments in the CZE step of the CITP‐CZE combination was systematically investigated. Methylhydroxyethylcellulose present in the BGE was used to eliminate the EOF. DNA ladder fragments were separated within 10 min with LODs in the range of 1–5 ng/μL (S/N = 3). The RSDs of the migration time and peak area of individual DNA fragments were in the range of 1–3 and 3–9%, respectively. The developed CITP‐CZE system was further applied to the analysis of digest plasmid DNA samples.     

High resolution solid‐state 13C‐NMR study of as‐cured and irradiated epoxy resins

This article presents the effects of strong ionizing radiations on the physico‐chemical modifications of aliphatic or aromatic amine‐cured epoxy resins based on diglycidyl ether of bisphenol A (DGEBA). Such epoxy resins have a considerable number of applications in the nuclear industrial field and are known to be very stable under moderate irradiation conditions. Using extensively high resolution solid‐state ¹³C‐NMR spectroscopy we show that the aliphatic amine‐cured resin (DGEBA‐TETA) appears much more sensitive to gamma rays than the aromatic amine‐cured one (DGEBA‐DDM). On the one hand, qualitative analyses of the high resolution solid‐state ¹³C‐NMR spectra of both epoxy resins, irradiated under similar conditions (8.5 MGy), reveal almost no change in the aromatic amine‐cured resin whereas new resonances are observed for the aliphatic amine‐cured resin. These new peaks were interpreted as the formation of new functional groups such as amides, acids and/or esters and to alkene groups probably formed in the aliphatic amine skeleton. On the other hand, molecular dynamics of these polymers are investigated by measuring the relaxation times, T_CH, T_1ρH and T_1C , before and after irradiation. The study of relaxation data shows the formation, under irradiation, of a more rigid network, especially for the aliphatic amine‐cured system and confirms that aromatic amine‐cured resin [DGEBA‐4,4′‐diaminodiphenylmethane(DDM)] is much less affected by ionizing radiations than the aliphatic amine‐cured resin [DGEBA‐triethylenetetramine(TETA)]. Moreover, it has been shown that the molecular modifications generated by irradiation on the powder of the aliphatic‐amine‐cured resin appear to be homogeneously distributed inside the polymers as no phase separations can be deduced from the above analyses. Copyright © 2001 John Wiley & Sons, Ltd.     

Quantitative analysis of saccharides by X‐ray photoelectron spectroscopy

A series of saccharides, including several monohydrates and one amorphous phase, has been investigated by XPS, providing the first database of survey and high‐resolution spectra for this class of compounds. Known stoichiometries and XPS‐determined elemental compositions agree well. XPS has sufficient precision for distinguishing the stoichiometries of mono‐, di‐, and polysaccharides. The C 1s chemical shifts of the acetal and alcohol groups are similar for all samples, albeit with slight binding energy increases in the series from mono‐ to di‐ and polysaccharides. Increasing X‐ray exposure causes a radiation‐induced increase of the aliphatic hydrocarbon emission at 285 eV, concomitant with the appearance of a high binding energy C 1s emission peak at 289.1 eV and a decrease in the O 1s/C 1s emission intensity ratio. Formation of aliphatic hydrocarbon groups is proposed to arise from dehydroxylation, while the increase in the 289.1 eV peak can be attributed to double dehydroxylation at the C₁ position or partial oxidation of an alcohol or acetal group. The rate of radiation damage correlates with previously reported rates of thermally induced caramelization. Copyright © 2009 John Wiley & Sons, Ltd.     

Correlation between Chiral Modifier Adsorption and Enantioselectivity in Hydrogenation Catalysis

Infrared absorption spectroscopy performed in situ at the solid–liquid interface revealed that the adsorption on platinum supported catalysts of 1‐(1‐naphthyl)‐ethylamine, which is used as a chiral modifier in hydrogenation catalysis, occurs through the amine group, not the aromatic ring as is widely believed. Comparisons were performed against a set of related modifier compounds with targeted substitutions to help identify the key moiety involved in the adsorption. It was determined that neither naphthalene‐based modifiers without amine groups nor those with tertiary amine moieties are capable of adsorbing on the metal surface to any significant extent. A direct correlation was also found between the ability of the amines to adsorb on the platinum surface and their performance as chiral modifiers that impart enantioselectivity to the hydrogenation of α‐keto esters such as ethyl pyruvate.     

Reproducible and efficient separation of aggregatable zein proteins by CZE using a volatile background electrolyte

Zein proteins are a complex mixture of polypetides that belong to the alcohol-soluble storage proteins group (prolamines) in corn. These proteins constitute about 50-60% of the total endosperm protein and are classified in different groups on the basis of differences in their solubility and sequence. Among them, zein proteins are considered the majority group showing a high tendency to aggregate what makes their analysis by any analytical method very difficult. Thus, CZE of these proteins requires the use of very complex BGEs noncompatible with online ESI-MS analysis. The aim of this work was to find a new BGE for the CZE separation of zein protein fully compatible with ESI-MS while providing further light on the complex CZE separation of aggregatable proteins. Thus, it is demonstrated in this work that efficient and reproducible CZE separations of zein proteins can be achieved by using a BGE composed of water, ACN, formic acid and ammonium hydroxide. Besides, it is shown that zein analysis is significantly improved by including the effect of an ammonium gradient during their separation. It is experimentally verified that the ammonium gradient can easily be achieved in CZE by either working with a sample zone with a low concentration of ammonium and a BGE with a high concentration, or conversely, working with a sample zone with high ammonium concentration and a BGE with low concentration of ammonium, giving rise in both cases to a significant improvement in the CZE separation of these proteins. It is demonstrated that this procedure can give rise to efficiency improvements of up to 20-fold in the CZE separation of zein proteins. Under optimized conditions, 20 proteins could be separated with average efficiencies higher than 400 000 theoretical plates/m. Some possible explanations of this effect are discussed including stacking, protein-capillary wall adsorption, protein solubility and protein-salt interactions.     

Simultaneous determination of deoxycytidine diphosphate and deoxycytidine triphosphate by capillary electrophoresis with transient isotachophoretic stacking: a sensitive monitoring method for ribonucleotide reductase activity

A simple and rapid capillary electrophoretic method was developed for simultaneous determination of sub‐micromolar 2′‐deoxycytidine 5′‐diphosphate (dCDP) and 2′‐deoxycytidine 5′‐triphosphate (dCTP) levels in enzyme assays without using radioactively labeled substrates. The separation was performed at 25°C using MES in the BGE as the terminating ion, the chloride ions in the sample buffer as the leading ion, and PEG 4000 in the BGE as the EOF suppressor for sample stacking by transient isotachophoresis (tITP). Several parameters affecting the separation were investigated, including the pH of the BGE, the concentration of sodium chloride in the sample buffer, and the concentrations of MES and PEG 4000 in the running buffer. Good separation with high separation efficiency was achieved within 6 min under optimal conditions. In comparison with the simple CZE method, the present tITP‐CZE method enabled a 150‐fold increase in the injection time without any decrease in resolution and the sensitivity was enhanced up to two orders of magnitude with the new method. The linear range of the method was 0.1–10 μM for dCDP and dCTP. The limits of detection of dCDP and dCTP were 85 and 73 nM, respectively. The proposed method was successfully applied for the activity assay of ribonucleotide reductase from Hep G2 and Sf9 cells.     

Enantiomeric separation of alcohols and amines on a proline chiral stationary phase by gas chromatography

A new chiral stationary phase for gas chromatography was prepared by covalently attaching a diproline chiral selector that has proven to be effective in liquid chromatography to a methylhydrosiloxane-dimethylsiloxane copolymer. With this new chiral stationary phase for GC, racemic aromatic alcohols could be resolved without derivatization. Racemic aromatic and aliphatic amines could also be resolved after derivatization of the amino groups with trifluoroacetic anhydride or isopropyl isocyanate. On this stationary phase, the isopropyl isocyanate derivatives of amines showed higher enantioselectivity than the trifluoroacetic anhydride derivatives. In both the enantiomeric separations of alcohols and derivatized amines, the aromatic racemic analytes showed higher enantioselectivities than their aliphatic analogs. Some of the alpha-amino and alpha-hydroxy aromatic acids could also be separated after derivatization to N-trifluoroacetyl methyl esters for amino acids or O-trifluoroacetyl methyl esters for hydroxyl acids.     

Study on enantiomeric separation of basic drugs by NACE in methanol‐based medium using erythromycin lactobionate as a chiral selector

A wide variety of chiral selectors have been employed in CZE, and among them macrocyclic antibiotics including glycopeptides, ansamycins, aminoglycosides and polypeptides exhibited prominent enantioselective properties toward abundant racemic compounds. Compared with CZE, the use of macrocyclic antibiotics as chiral selectors in NACE has not been reported previously. In this study, an approach to the enantioseparation of basic drugs by means of NACE with erythromycin lactobionate (EL) belonging to the group of macrolide antibiotics has been investigated. Especially different from the above four classes of antibiotics, there are no reports concerned with the use of macrolides which belong to macrocyclic antibiotics as chiral selectors in CE. In this work EL is first used as a chiral selector in NACE for the enantiomeric separations of two racemic basic drugs that possess high separability consisting of propranolol and duloxetine. Furthermore, EL possesses advantages such as high solubility and low viscosity in the solvent and very weak UV absorption. The chiral separations were achieved using Tris‐boric acid as the BGE and methanol as the organic medium. In the course of this work we observed that both migration time and enantioseparation were influenced by several parameters such as the pH and composition of the BGE, EL concentration, capillary temperature and applied voltage. Consequently, these parameters were systematically optimized in order to obtain the optimum enantioseparations.     

Determination of aliphatic amines by cation‐exchange chromatography with suppressed conductivity detection after solid phase extraction*

A sensitive method for the determination of underivatized aliphatic amines based on cation exchange chromatography coupled with suppressed conductivity detection scheme and solid phase extraction (SPE) procedure has been developed. A surface modified styrene divinylbenzene polymeric sorbent, based on a reversed‐phase (RP) and strong cation exchange (SCX) mixed mode was used as an active material for the SPE of amines. The conductometric capabilities of several aliphatic mono‐ and polyamines, expressed in terms of molar sensitivity (nS/μM), were determined. The LODs, obtained without the SPE treatment, ranged between 20 and 65 nM for putrescine and 2‐butylamine, respectively. The resulting calibration plots for the aliphatic amines were generally linear over about three orders of magnitude, with correlation coefficients >0.98. The LODs of amines decreased generally by one factor when SPE procedure, using BaCl₂/H₂SO₄ eluents, has been adopted. The proposed SPE procedure, seems to offer good results in terms of preconcentration, recoveries and cleanup of samples. The proposed methodology was successfully tested for the quantitative determination of some biogenic amines in beer and tuna.     

Use of organic solvent to prevent protein adsorption in CE-MS experiments

Protein adsorption onto capillary wall often hampers CE separations, particularly in the CZE mode. Electrostatic interactions are not the only factors affecting adsorption, as hydrophobic interactions and/or protein conformational changes are also involved in the adsorption phenomenon. Numerous methods can be used to reduce or avoid adsorption, such as (i) addition of low molecular weight molecules in the BGE, (ii) use of surfactants, or (iii) capillary coatings. However, most of these methods are not MS-compatible. In this study, we evaluated the addition of organic solvent as an alternative MS-compatible method to decrease protein adsorption. The effect of the solvent addition was emphasized using classical methods for estimating reversible and irreversible adsorption. In many cases, organic solvents were effective at decreasing adsorption. However, the influence of the organic solvent on protein adsorption should be evaluated case-by-case in CE method development.