Palladium Nanoparticles Embedded into Graphene Nanosheets: Preparation,Characterization, and Nonenzymatic Electrochemical Detection of H2O2

A novel nonenzymatic H₂O₂ sensor based on a palladium nanoparticles/graphene (Pd‐NPs/GN) hybrid nanostructures composite film modified glassy carbon electrode (GCE) was reported. The composites of graphene (GN) decorated with Pd nanoparticles have been prepared by simultaneously reducing graphite oxide (GO) and K₂PdCl₄ in one pot. The Pd‐NPs were intended to enlarge the interplanar spacing of graphene nanosheets and were well dispersed on the surface or completely embedded into few‐layer GN, which maintain their high surface area and prevent GN from aggregating. XPS analysis indicated that the surface Pd atoms are negatively charged, favoring the reduction process of H₂O₂. Moreover, the Pd‐NPs/GN/GCE could remarkably decrease the overpotential and enhance the electron‐transfer rate due to the good contact between Pd‐NPs and GN sheets, and Pd‐NPs have high catalytical effect for H₂O₂ reduction. Amperometric measurements allow observation of the electrochemical reduction of H₂O₂ at 0.5 V (vs. Ag/AgCl). The H₂O₂ reduction current is linear to its concentration in the range from 1×10^?9 to 2×10^?3 M, and the detection limit was found to be 2×10^?10 M (S/N=3). The as‐prepared nonenzymatic H₂O₂ sensor exhibits excellent repeatability, selectivity and long‐term stability.     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

Effect of supports on activity and stability of Pt–Pd catalysts for oxygen reduction reaction in proton exchange membrane fuel cells

The platinum–palladium alloy (Pt–Pd) catalysts were prepared on various supports including Vulcan XC72, Hicon Black (HB), multiwalled carbon nanotubes (MWCNTs), and titanium dioxide (TiO₂) by a combined approach of impregnation and seeding using NaBH₄ reduction at low temperature. Their oxygen reduction reaction (ORR) activities in single proton exchange membrane fuel cell (PEMFC) under a H₂/O₂ environment and their stability in an acid electrolyte (0.5 M H₂SO₄) were tested and compared with the Vulcan XC72-supported Pt (Pt/C) catalysts. The presence of the Pd metal as well as different types of supports affected the ORR activity in H₂/O₂ environment and stability in the acid electrolyte. Overall, the HB-supported Pt–Pd (Pt–Pd/HB) catalysts provided the highest current density at 0.6 V under a H₂/O₂ environment, while the MWCNT-supported Pt–Pd (Pt–Pd/MWCNT) catalyst provided the best stability in an acid electrolyte.     

过渡金属改性的Pd/TS-1催化氢、氧直接合成H_2O_2的性能

利用等体积浸渍法制备了M-Pd/TS-1(M=Ce,La,Pt,Fe,Co,Ni,Cr,Mn,Zn,Cd,Cu)系列催化剂,并将制得的催化剂用于常压下氢、氧直接合成过氧化氢的反应。考察了M的类型及负载量对M-Pd/TS-1催化剂催化性能的影响。结果表明,M选Ce时,催化剂的性能最好。Ce的最佳掺入量,n_(Ce)/(n_(Ce)+n_(Pd))=0.5%。对Ce改性与未改性的催化剂进行了TEM及静态化学吸附分析,结果表明,掺入Ce可使Pd在TS-1分子筛表面的粒度及分散度得到改善。考察了n_(O_2)/n_(H_2)比,气体流量,反应时间等反应条件对H_2转化率、H_2O_2选择性及收率的影响。在相对优化的工艺条件下,即n_(O_2)/n_(H_2)=3,气体流量为25 mL·min~(-1),反应时间为3 h时,H_2O_2,的收率可达到25.7%,TOF值为18.7 mol·mol~(-1)·h~(-1),此时溶液中H_2O_2的质量百分数为0.8%。     

Study of Ce0.7Sn0.3O2 supported PdO catalysts for CO oxidation

Palladium supported by Ce_0.7Sn_0.3O₂ has been prepared by an impregnation method, and used for low temperature carbon monoxide oxidation. They were characterized by means of XRD and H₂-TPR techniques. For PdO/Ce_0.7Sn_0.3O₂ catalyst, three reduction peaks (α, β and γ) are observed. The β peak contributes to the reduction of PdO species and Sn⁴⁺ species on the surface of Ce_0.7Sn_0.3O₂; β peak to the reduction of bulk SnO₂ and surface Ce⁴⁺and the γ peak to the reduction of bulk CeO₂. The increase of Pd loading from 0 to 0.75% enhances oxidation of CO, further increase of the Pd content affects the catalytic activity but slightly. XRD and TPR results show that highly dispersed Pd on the surface of the support is the active species for CO oxidation. This revised version was published online in June 2006 with corrections to the Cover Date.     

Reduced Graphene Oxide|Carbon Ceramic Electrode Modified with CdS‐Hemoglobin as a Sensitive Hydrogen Peroxide Biosensor

A sensitive hydrogen peroxide (H₂O₂) biosensor was developed based on a reduced graphene oxide|carbon ceramic electrode (RGO|CCE) modified with cadmium sulfide‐hemoglobin (CdS‐Hb). The electron transfer kinetics of Hb were promoted due to the synergetic function of RGO and CdS nanoparticles. The transfer coefficient (α) and the heterogeneous electron transfer rate constant (k_s) were calculated to be 0.54 and 2.6 s^?1, respectively, indicating a great facilitation achieved in the electron transfer between Hb and the electrode surface. The biosensor showed a good linear response to the reduction of H₂O₂ over the concentration range of 2–240 µM with a detection limit of 0.24 µM (S/N=3) and a sensitivity of 1.056 µA µM^?1 cm^?2. The high surface coverage of the CdS‐Hb modified RGO|CCE (1.04×10^?8 mol cm^?2) and a smaller value of the apparent Michaelis? Menten constant (0.24 mM) confirmed excellent loading of Hb and high affinity of the biosensor for hydrogen peroxide.     

Insights into the Intramolecular Donor Stabilisation of Organostannylene Palladium and Platinum Complexes: Syntheses,Structures and DFT Calculations

The syntheses of the transition metal complexes cis‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂MX₂] ( 1 , M=Pd, X=Cl; 2 , M=Pd, X=Br; 3 , M=Pd, X=I; 4 , M=Pt, X=Cl), cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂MX₂] ( 5 , M=Pd, X=I; 6 , M=Pt, X=Cl), trans‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnI}₂PtI₂] ( 7 ) and trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂ C₆H₂SnCl)PdI₂]₂ ( 8 ) are reported. Also reported is the serendipitous formation of the unprecedented complexes trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂ Pt(SnCl₃)₂] ( 10 ) and [(4‐tBu‐2,6‐{P(O) (OiPr)₂}₂C₆H₂SnCl)₃Pt(SnCl₃)₂] ( 11 ). The compounds were characterised by elemental analyses, ¹H, ¹³C, ³¹P, ¹¹⁹Sn and ¹⁹⁵Pt NMR spectroscopy, single‐crystal X‐ray diffraction analysis, UV/Vis spectroscopy and, in the cases of compounds 1 , 3 and 4 , also by Mössbauer spectroscopy. All the compounds show the tin atoms in a distorted trigonal‐bipyramidal environment. The Mössbauer spectra suggest the tin atoms to be present in the oxidation state III. The kinetic lability of the complexes was studied by redistribution reactions between compounds 1 and 3 as well as between 1 and cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂PdCl₂]. DFT calculations provided insights into both the bonding situation of the compounds and the energy difference between the cis and trans isomers. The latter is influenced by the donor strength of the pincer‐type ligands.     

A New Electrochemical Biosensor for Determination of Hydrogen Peroxide in Food Based on Well‐Dispersive Gold Nanoparticles on Graphene Oxide

Herein, we describe a new method for the detection of hydrogen peroxide (H₂O₂) in food by using an electrochemical biosensor. Initially, ultrafine gold nanoparticles dispersed on graphene oxide (AuNP‐GO) were synthesized by the redox reaction between AuCl₄^? and GO, and thionine‐catalase conjugates were then assembled onto the AuNP‐GO surface on a glassy carbon electrode. With the aid of the AuNP‐GO, the as‐prepared biosensor exhibited good electrocatalytic efficiency toward the reduction of H₂O₂ in pH 5.8 acetic acid buffer. Under optimal conditions, the dynamic responses of the biosensor toward H₂O₂ were achieved in the range from 0.1 µM to 2.3 mM, and the detection limit (LOD) was 0.01 µM at 3s_B. The Michaelis–Menten constant was measured to be 0.98 mM. In addition, the repeatability, reproducibility, selectivity and stability of the biosensor were investigated and evaluated in detail. Finally, the method was applied for sensing H₂O₂ in spiked or naturally contaminated samples including sterilized milk, apple juices, watermelon juice, coconut milk, and mango juice, receiving good correspondence with the results from the permanganate titration method. The disposable biosensor could offer a great potential for rapid, cost‐effective and on‐field analysis of H₂O₂ in foodstuff.     

Controllable Synthesis of Nearly Monodisperse Spherical Aggregates of CeO2 Nanocrystals and Their Catalytic Activity for HCHO Oxidation

Herein, we report a facile surfactant‐assisted solvothermal synthetic method to prepare nearly monodisperse spherical CeO₂ nanocrystals. A good control of the size of CeO₂ nanocrystals in the range of 100–500 nm was achieved by simply varying the synthetic parameters such as reaction time, volume ratio of ethanol to water (R), molar ratio of PVP, and concentration of Ce(NO₃)₃?6 H₂O in solution. A possible mechanism for the growth of spherical CeO₂ nanocrystals is proposed. The obtained CeO₂ nanocrystals with a surface area of up to 47 m²g^?1 were then employed as a catalyst support. By loading Au‐Pd nanoparticles (about 3 wt. %) onto the CeO₂ support, an Au‐Pd/CeO₂ catalyst was prepared that exhibited high catalytic activity for HCHO oxidation. At the low temperature of 50 °C, the percentage of HCHO conversion was 100 %, suggesting potential applications in preferential oxidation and other catalytic reactions. These Au‐Pd/CeO₂ catalysts may also find applications in indoor formaldehyde decontamination and industrial catalysis. The facile solvothermal method can be extended to the preparation of other metal oxide nanocrystals and provides guidance for size‐ and morphology‐controlled synthesis.     

Effect of Pt and Pd additives on the state of the surface layer and catalytic activity of niobium oxides in the oxidation of hydrogen

Catalysts prepared by the hydrogen reduction of Nb₂O₅ in the presence of Pt or Pd have specific surface much greater than for the starting oxide and their catalytic activity in the oxidation of hydrogen is much greater than the activity of Pt/Al₂O₃ or Pd/Al₂O₃. X-ray phase analysis and X-ray photoelectron spectroscopy were used to establish the existence of Nb₂O_5–x nonstoichiometric oxides in the catalyst, which enhances the catalytic activity of the surface. The kinetic behavior of the oxidation of hydrogen on these catalysts is explained in the framework of the Eley–Riedel mechanism.     

Structural and functional design of catalytic converters for emissions from internal combustion engines

We consider some features of technology for manufacturing advanced three-way (CO/NO _x /C _n H _m ) catalytic converters for emissions of internal combustion engines, namely, application, stabilization, and modification of γ-Al₂O₃ second supports on synthetic cordierite matrices and Pt, Pd, and Rh active components, as well as oxidation of finely divided carbon on the surface of soot filters coated with a catalyst coating in the form of binary oxide compositions (CuCr₂O₄ and CuCo₂O₄) using a number of oxidizers (O₂, O₃, NO, NO₂, H₂O, and CO₂).     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Nonenzymatic Hydrogen Peroxide Electrochemical Sensor Based on Au‐HS/SO3H‐PMO (Et) Nanocomposite

A newly nonenzymatic sensor for hydrogen peroxide (H₂O₂) based on the (Au‐HS/SO₃H‐PMO (Et)) nanocomposite is demonstrated. The electrochemical properties of the as‐prepared nanocomposite were studied. It displayed an excellent performance towards H₂O₂ sensing in the linear response range from 0.20 µM to 4.30 mM (R=0.9999) with a sensitivity of 6.35×10² µA µM^?1 cm^?2 and a low detection limit of 0.0499 µM. Furthermore, it was not affected by electroactive interference species. These features proved that the modified electrode was suitable for determination of H₂O₂.     

Development of Silver Nanowires Based Highly Sensitive Amperometric Glucose Biosensor

The fabrication of a highly sensitive amperometric glucose biosensor based on silver nanowires (AgNWs) is presented. The electrochemical behavior of glassy carbon electrode modified by Ag NWs exhibits remarkable catalytic performance towards hydrogen peroxide (H₂O₂) and glucose detection. The biosensor could detect glucose in the linear range from 0.005 mM to 10 mM, with a detection limit of 50 µM (S/N=3). The glucose biosensor shows high and reproducible sensitivity of 175.49 µA cm^?2 mM and good stability. In addition, the biosensor exhibits a good anti‐interference ability and favorable stability over relatively long‐term storage (more than 21 days).     

Pt/MOx(M=Ni,Fe,Co,Ce)催化剂上CO氧化反应中抗H2O与CO2的性能研究

我们研究了4种负载型Pt催化剂（1Pt/NiO、1Pt/FeO_x、1Pt/Co₃O₄和Pt/CeO₂）上不同反应条件下CO氧化活性及抗H₂O和CO₂性能.发现反应气氛中CO₂的加入与CO形成了竞争吸附,并在催化剂表面形成了碳酸盐物种堵塞了活性位,从而导致催化剂失活.反应气氛中H₂O的加入对1Pt/CeO₂催化剂的活性有所抑制,但对1Pt/FeO_x、1Pt/NiO和1Pt/Co₃O₄催化剂的活性却有促进作用.在1Pt/FeO_x和1Pt/CeO₂催化剂上的分步反应实验和动力学研究表明,尽管H₂O的加入在两种催化剂上均与CO形成了竞争吸附,但在1Pt/FeO_x催化剂上H₂O在载体表面解离形成的羟基更易与CO反应,开辟了新的反应途径,从而提高了反应性能.此外,H₂O的加入能有效分解该催化剂上的碳酸盐物种,从而保持了其稳定性.     

Enhanced catalytic performance of Pd‐Ga bimetallic catalysts for 2‐ethylanthraquinone hydrogenation

A series of Pd and Pd‐Ga bimetallic catalysts were prepared by a co‐impregnation method for 2‐ethylanthraquinone (EAQ) hydrogenation to produce hydrogen peroxide. Compared with 0.6Pd catalyst, the hydrogenation efficiency of 0.6Pd1.2Ga catalyst (11.9 g L^?1) increases by 32.2%, and the stability of 0.6Pd1.2Ga catalyst is also higher than that of 0.6Pd catalyst. The structures of the samples were determined by N₂ adsorption–desorption, ICP, XRD, CO chemisorption, TEM, H₂‐TPR, in situ CO‐DRIFTS and XPS. The results suggest that incorporation of Ga species improves Pd dispersion and generates a strong interaction between Ga₂O₃ and Pd interface or between Pd and support. DFT calculation results indicate that the strong adsorption of carbonyl group on Ga₂O₃/Pd interface facilitates the activation of EAQ and promotes the hydrogenation efficiency.     

Flow Injection Amperometric Analysis of H2O2 at Platinum Nanoparticles Modified Pencil Graphite Electrode

A Pt nanoparticle modified Pencil Graphite Electrode (PGE) was proposed for the electrocatalytic oxidation and non‐enzymatic determination of H₂O₂ in Flow Injection Analysis (FIA) system. Platinum nanoparticles (PtNPs) electrochemically deposited on pretreated PGE (p.PGE) surface by recording cyclic voltammograms of 1.0 mM of H₂PtCl₆ solution in 0.10 M KCl at scan rate of 50 mV s⁻¹ for 30 cycles. Cyclic voltammograms show that the oxidation peak potential of H₂O₂ shifts from about +700 mV at bare PGE to +50 mV at PtNPs/p.PGE vs. Ag/AgCl /KCl (sat.). It can be concluded that PtNPs/p.PGE exhibits a good electrocatalytic activity towards oxidation of H₂O₂. Then, FI amperometric analysis of H₂O₂ was performed under optimized conditions using a new homemade electrochemical flow cell which was constructed for PGE. Linear range was found as 2.5 μM to 750.0 μM H₂O₂ with a detection limit of 0.73 μM (based on S_b/m of 3). As a result, this study shows the first study on the FI amperometric determination of H₂O₂ at PtNPs/p.PGE which exhibits a simple, low cost, commercially available, disposable sensor for H₂O₂ detection. The proposed electrode was successfully applied to determination of H₂O₂ in real sample.     

Electrodeposition of Three‐Dimensional Porous Platinum Film on Removable Polyaniline Template for High‐Performance Electroanalysis

Three‐dimensional porous platinum (Pt_por) films are prepared based on Pt electrodeposition on polyaniline (PANI) modified electrodes followed by selective dissolution of PANI with HNO₃. Electrochemical quartz crystal microbalance data suggest that the PANI‐H₂PtCl₆ interaction involves redox and coordination reactions, depending on the working potential. The Pt_por shows better electrocatalytic performance than the Pt/PANI and conventionally electrodeposited Pt. The Pt_por modified glassy carbon electrode (GCE) can electrocatalyze the oxidation of H₂O₂ with a sensitivity of 414 µA cm^?2 mM^?1 and a detection limit of 9 nM, and the chitosan‐glucose oxidase/Pt_por/GCE can sense glucose with a sensitivity of 93.4 µA cm^?2 mM^?1.     

Oxidizing Elemental Platinum with Oleum under Harsh Conditions: The Unique Tris(disulfato)platinate(IV) [Pt(S2O7)3]2− Anion

For the first time, direct oxidation of elemental platinum by a mineral acid to its tetravalent state was observed in course of the reaction of platinum with oleum (65 % SO₃) in the presence of barium carbonate. The reaction has been carried out in torch‐sealed glass ampoules at 160 °C and gave yellow single crystals of Ba[Pt(S₂O₇)₃](H₂SO₄)_0.5(H₂S₂O₇)_0.5 (triclinic, P$\bar 1$ , Z=2, a=992.05(2), b=1069.07(3), c=1114.22(3) pm, α=69.49(7), β=72.96(2), γ=72.93(1)°, V=1033.95(5) ų). The structure of Ba[Pt(S₂O₇)₃](H₂SO₄)_0.5(H₂S₂O₇)_0.5 exhibits the unique tris‐(disulfato)‐platinate anion [Pt(S₂O₇)₃]^2? with three chelating disulfate groups coordinated to the platinum atom. Charge balance is achieved by the Ba²⁺ ions, which are coordinated by (S₂O₇)^2? groups from the platinate complex and by disordered sulfuric acids and disulfuric acid molecules. Thermal decomposition of the bulk material revealed elemental platinum and barium sulfate as decomposition residual.     

Direct Electrochemistry and Application in Electrocatalysis of Hemoglobin in a Polyacrylic Resin‐Gold Colloid Nanocomposite Film

A novel nanocomposite integrating the good biocompatibility of polyacrylic resin nanoparticles (PAR) and the good conductivity of colloidal gold nanoparticles was proposed to construct the matrix for the immobilization of hemoglobin (Hb) on the surface of a glassy carbon electrode (GCE). UV‐vis spectra demonstrated that Hb preserved its native structure after being entrapped into the composite film. The direct electrochemistry of hemoglobin (Hb) in this nanocomposite films showed a pair of well‐defined and quasi‐reversible cyclic voltammetric peaks with a formal potential of ?0.307 mV and a constant electron transfer rate of 2.51±0.2 s^?1. The resultant amperometric biosensor showed fast responses to the analytes with excellent detection limits of 0.2 µM for H₂O₂ and 0.89 µM for TCA (S/N=3), and high sensitivity of 1108.6 for H₂O₂ and 77.14 mA cm^?2 M^?1 for TCA, respectively. The linear current response was found in the range from 0.59 to 7.3 µM (R²=0.9996) for H₂O₂ and from 5 to 85 µM (R²=0.9996) for TCA, while the superior apparent Michaelis–Menten constant was 0.012 mM for H₂O₂ and 0.536 mM for TCA, respectively. Therefore, the PAR‐Au‐Hb nanocomposite as a novel matrix opens up a possibility for further study on the direct electrochemistry of other proteins.