Interactions of proteins with uniform colloidal hematite and chromium hydroxide particles. II. Stability and mobility

Stability of hematite and chromium hydroxide particles covered by ovalbumin, -globulin, and lysozyme, respectively, and mobilities of the same coated particles in aqueous media were investigated as a function of the pH, ionic strenght [NaNO₃, Mg(NO₃)₂], and the amount of added proteins. It was found that ovalbumin causes electrosteric stabilization of dispersions at pH values other than 5, while flocculation occurred at pH 5 (which was the i.e.p. of the coated particles). Mobility curves of ovalbumin covered particles resembled those of the pure protein. Dispersions with -globulin flocculated at and around the i.e.p. of the macromolecule (pH7). The mobility curves of -gobulin-coated sols were intermediate between those of the protein and of the cores, and were dependent upon the amount of adsorbed -globulin. Heterocoagulation was observed for both hematite and chromium hydroxide dispersions with lysozyme. Mobilities of lysozyme covered particles were between those of the cores and of the protein, but were not dependent upon the quantity of adsorbed polymer.Supported by the NSF Grant CHE-9108420Part of a Ph.D. Thesis     

Adsorption behavior of polymers having phosphoric acid group on γ-Fe2O3 and magnetic characteristics in magnetic coatings

Polymers having phosphoric acid groups were prepared as a model binder for magnetic coatings, and the correlation among the adsorption behavior of the polymers onto-Fe₂O₃ particles and the dispersibility, the orientation, and the packing density of-Fe₂O₃ particles in the magnetic coatings was investigated.PMMA homopolymer molecules hardly adsorbed on-Fe₂O₃, and the interfacial tension at a water/polymer solution (toluene) interface ( _W/T) was scarcely changed compared with a water/toluene interface. Increasing with the content of polymeric phosphoric acid group, the adsorbance of polymer increased and the interfacial tension ( _W/T) decreased. When the content of polymeric phosphoric acid groups was over 0.4 mol%, the adsorbance of polymer and interfacial tension ( _W/T ) remained constant. When these polymers were used as a binder for magnetic tapes, the dispersibility of-Fe₂O₃ in the magnetic coatings was improved, increasing with the content of polymeric phosphoric acid group; however, when the content of phosphoric acid group was over 0.2 mol%, its dispersibility decreased abruptly.Studies on Recording Magnetic Materials and Magnetic Composite. XVIII.     

Fluorescent Molecular Sensing System Based on Tri-Pyrenes-Labeled γ-Cyclodextrin at the Hetero Rim

Fluorescent active host labeled at the upper and lower rims of -cyclodextrin, namely, mono-3^A-deoxy-3^A-pyrenebutylamido-6^X,Y-O-bis-pyrenebutylate-mono-altro--cyclodextrin (-3) has been synthesized as a chemosensor for steroidal guests using fluorescence spectra change upon a guest addition. The -3 shows monomer and excimer fluorescence, which results in an increase of the intensity of monomer and decrease of excimer fluorescence with a host–guest binding in the cyclodextrin cavity. The extent of monomer and excimer fluorescence variations of -3 was used as an indication for the sensing ability for the guests examined. The guest-induced fluorescence changes were measured for 10^–7 M solutions of -3. The sensing parameters (I_ex/I⁰_ex and I_mon/I⁰_mono) were used to describe the sensing ability of -3. The values of I_ex/I⁰_ex describe that -3 shows less selectivity for guests than that of mono-3^A-deoxy-3^A-pyrenebutylamido-6^X-O-mono-pyrenebutylate-mono-altro--cyclodextrin (-2), and the values of I_mon/I⁰_mono show that -3 shows higher sensitivity and selectivity than that of -2.     

Determination of the surface free energy of modified carbon fibers and its relation to the work of adhesion

Surface free energy of various carbon fibers was determined by tensiometric method in three different procedures. The dispersive _s ^d and the nondispersive _s ^p components were separately determined by contact angle measurements in two-phase system, formamide-n-alkanes. The _s ^p increased by oxidation and decreased by hydrogen reduction, while the _s ^d remained almost constant.The _s ^p value determined from contact angle of water/ethyleneglycol solution tended to become higher. The critical surface free energy was in harmony with the total free energy determined from formamide-n-alkanes system as long as liquids were properly selected. The formation of oxygen-containing functional groups was evidenced by ESCA, and the surface [O]/[C] ratio was related linearly to the surface polarity defined by _s ^p [ _s ^d + _s ^p ] Oxidation in liquid phase resulted in the formation of both hydroxyls and carboxyls, while only hydroxyls were formed in gas phase. The interfacial shear strength of the fiber-epoxy resin could be closely correlated with thermodynamical work of adhesion calculated on the basis of surface free energy and its component.     

Application of l-cysteine-capped nano-ZnS as a fluorescence probe for the determination of proteins

Nanometer-sized l-cysteine-capped ZnS particles have been synthesized and used as a fluorescence probe to investigate the effect of proteins on fluorescent intensity. With =190 nm, maximum and constant synchronous fluorescence enhancement was produced at 267 nm and pH 5.12 in the presence of proteins. A highly sensitive synchronous fluorescence method for the rapid determination of proteins has been developed. Under optimum conditions, calibration graphs are linear over the range 0.03–8.0 g mL^–1 for bovine serum albumin (BSA), 0.01–6.0 g mL^–1 for human serum albumin (HSA), 0.05–8.0 g mL^–1 for -globulin (-G), and 0.04–4.0 g mL^–1 for ovalbumin, respectively. The relative standard deviations of seven replicate measurements were 1.75% for 1.0 g mL^–1 BSA, 1.90% for 1.0 g mL^–1 HSA, 1.65% for 1.0 g mL^–1 -G, and 2.32% for 1.0 g mL^–1 ovalbumin.     

Solvent effects on chemical processes. 4. Complex formation between naphthalene and theophylline in binary aqueous-organic solvents

The standard free energy change for complex formation is written as a sum of effects arising from solvent-solvent interactions (the general medium effect), solvent-solute interactions (the solvation effect), and solute-solute interactions (the intersolute effect). The general medium effect is given by gA(–_o), where g is a curvature correction factor to the solvent surface tension , A is the change in surface area as the two solvent cavities containing the substrate (naphthalene) and ligand (theophylline) collapse into a single cavity containing the complex, and _o is the value of surface tcnsion at which there is no net solvophobic interaction; is defined to be the value appropriate to the equilibrium mean solvation shell composition. The solvation effect is modeled by equilibrium stoichiometric formation of solvated species. All data are related to the fully aqueous system to give _MG^o, the solvent effect on the free energy change, as an explicit function of solvent composition. Solvent effects on bimolecular association are related to solvent effects on the solubilities of the substrate, ligand, and complex. Approximation methods for interpreting such systems are described and are applied to the naphthalene-theophylline complex. It is shown that complex destabilization in mixed aqueous-organic solvents (relative to the fully aqueous system) may receive contributions from both the general medium and the solvation effects, and that these contributions can be quantitatively estimated.     

Synthesis and sorption properties of new hybrid chelating sorbents with β-alanine functional groups

A series of -aminopropylsilylated sorbents was obtained from different oxide supports (silica gels, silica fillers, macroporous glasses, alumina) and by the direct synthesis (hydrolytic polycondensation of tetraalkoxysilanes with -aminopropyltriethoxysilane). The highest degree of immobilization was achieved for silicas, while the most convenient solvent was methanol. Sorbents with -alanine functional groups were obtained by the subsequent reaction with acrylic acid. The degree of -carboxyethylation was 1.3–1.9, and the highest content of functional groups (v_COOH = 3.23 mmol g^–1) was achieved for carboxyethylated xero gel synthesized by the copolycondensation of tetraethoxysilane with -aminopropyltriethoxysilane. The sorbents containing -alanine possess a higher selectivity of Cu²⁺ ion sorption than the initial -aminopropylsilylated sorbents.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2620–2625, December, 2004.     

Characterization of water-soluble,cationic polyelectrolytes as exemplified by poly(acrylamide-co-trimethylammoniumethylethacryate chloride) and the establishment of structure-property relationships

The cationic copolymerization products of poly (acrylamide-co-trimethylammoniumethylmethacrylate chloride (PTMAC) having cationic monomer percentages of 8%, 25%, and 50% as well as the cationic homopolymer, were characterized with respect to their molecular dimensions. The light-scattering and viscometric measurements were carried out for molecular weights ranging from 200 000 to 12 800 000 g/mol in 1 M NaCl solution at 25°C. It was possible to establish a relationship between the molecular weight and the two parameters: intrinsic viscosity and radius of gyration, for all four polymers.Rheological investigations of the flow properties in 1 M NaCl solution were also carried out using the polymer with a cationic monomer of 50% (PTMAC 50). Structure-property relationships were formulated which made it possible to describe and predict the shear viscosity, both in the zero-shear region (Newtonian region) and in the shear-dependent region (non-Newtonian region) as a function of the polymer concentration, the molecular weight, and shear rate.Abbreviations a exponent of the []-M relationship - A ₂ 2^nd virial coefficient/mol·cm³·g^–2 - AAm acrylamide - b slope of the flow-curve in the shear-rate dependent region - c concentration/g·cm^–3 - dn/dc refractive index increment/cm³·g^–1 - f function - K constant of the []-M relationship/cm³·g^t-1 - m _c proportion of cationic monomers/mol % - M molecular weight/g·mol^–1 - M _w weight-average molecular weight/g·mol^–1 - M _n number-average molecular weight/g·mol^–1 - NaCL sodium chloride - PAAm polyacrylamide - PS polystyrene - PTMAC poly(acrylamide-co-trimethylammoniumethylme thacrylate chloride) - R_G ^20.5 radius of gyration/nm - TMAC trimethylammoniumethylmethacrylate chloride - shear rate/s^–1 - critical shear rate/s^–1 - viscosity/Pa·s - 0 zero-shear viscosity/Pa·s - _s solvent viscosity/Pa·s - _sp specific viscosity - [] intrinsic viscosity/cm³·g^–1 - relaxation time/s     

γ-Cyclodextrin-enhanced dimerization of viologen radicals

The effects of cyclodextrins (CDs) on the monomer-dimer equilibria of 1,1-dialkylviologen radical cations (Cn Cn V^.+ :n = 1–5) and one-electron reduced 1,1-bis(3-sulfopropyl)viologen (SPV) were investigated spectroelectrochemically. The dimerization is enhanced upon addition of-CD, while the addition of-CD and-CD suppresses the dimerization. This is attributed to the stabilization of dimers by the inclusion of the dimer in the cavity of-CD From the dependence of the apparent dimerization constants (K _D ) on the concentration of-CD the association constants of the monomer (K _C1) and dimer (K _C2) with--CD were determined. TheK _C1 value increases slightly, from 5 M^–1 forn = 1 to 35 M^–1 forn = 5, as the length of the alkyl substituents of viologen increases. TheK _C2 value depends strongly on the alkyl substituents giving the smallest value of 85 M^–1 for (SPV^.–)₂ and the largest one of 3500 M^–1 for (C₄C₄V^.+)₂. These results, together with the difference in UV-vis absorption spectra obtained in the absence and in the presence of-CD, suggest that the alkyl substituents and part of the bipyridine ring of viologen radicals are included in the-CD cavity forming dimers in which the bipyridine rings are stacked at an oblique angle.     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Determination of dispersive and nondispersive components of the surface free energy of glass fibers

The dispersive component _s ^d of the surface free energy of glass fibers and its interaction energy with alkanes, benzene, 1-nitropropane, ethyleneglycol, glycerol, formamide, and water were quantitatively determined by the tensiometric method within two liquids. The values of nondispersive interaction energy I _SL ^p were found to be a linear function of the square root of the nondispersive component of the surface free energy of liquids. This suggests that the nondispersive interaction energy may be represented by the geometric mean of the nondispersive component of the surface free energy of a solid and a liquid. The slope gave the nondispersive component _s ^p of the surface free energy. The _s ^p values are 33 and 14 mJ/m² for the untreated and aminosilane-treated fibers, respectively, suggesting that organophilic character has developed on the surface after aminosilane treatment. The _s ^p value was almost similar after the treatment, probably because of the polar characteristics of amino groups.     

Studies on the γ-effects. Part 3. Variations in the γ-effects ofN-substituted benzylamines,o-aminomethylphenols and 3,4-dihydro-2H-1,3-benzoxazines against theE s ′ substituent constants

The magnitude of the -effects on¹³C chemical shifts was studied as function of theN-substitution [Me, Et, Bu, CH₂C₆H₅, CH₂CH₂C₆H₅, Prⁱ, Bu^t, Bu^s, c-C₆H₁₁, CH(CH₃)C₆H₅, Bu^t, or Ph] for several benzylamines,o-aminomethylphenols and 3,4-dihydro-2H-1,3-benzoxazines. A correlation between the _c-values and the steric substituent constants (E _s ) of theN-substituents proved useful in characterizing the variation of the -effects along with the conformational factors. The diastereospecificity of the -effects is discussed for purposes of configurational assignments.For part 2, see Ref. 1. This paper is also Part 5 in the series Studies on the Benzoxazine Series.     

Intercalation of α,ω-Alkanediamines in Layered Aluminium Dihydrogen Triphosphate Dihydrate

Intercalation of ,-alkanediamines, NH₂(CH₂) _n NH₂ (n = 3–10), into layered aluminium dihydrogen triphosphate dihydrate, AlH₂(P₃(O₁₀... 2H₂O, was investigated by XRD, DTA-TG, elemental analysis, and solid-state ³¹P, ¹³C and ²⁷Al NMR. ,-Alkanediamines are intercalated to form a monomolecular layer in the interlayer region, in which the alkanediamines incline at 57 ± 5° to the phosphate layers, whereas n-alkylamines form a bilayer structure with the same inclination angle. Two amino groups in an ,-alkanediamine molecule bridge the layered sheets of phosphates.     

Crosslinking of alkylpolysiloxane filsm on various types of glass surfaces including fused silica using γ-radiation of a60cobalt-source. Comparison to crosslinking by thermal peroxid treatment

Summary Crosslinking of alkylpolysiloxane stationary phases, especially in thick film capillary columns, is useful for the homogenous coating of fused silica and pretreated alkaliglass surfaces. The films of the stationary liquid are immobilized against solvent rinsing using CH₂Cl₂, pentane, and acetone, and maintain homogenity even at high temperature. Various doses of -radiation from a⁶⁰Co. source were used for the crosslinking instead of the thermal peroxid treatment recently described by other authors. The effect of the -radiation crosslinking-procedure was investigated in comparison to the peroxid method in regard of: decrease of stationary phase content by solvent rinsing, separation efficiency, tailing behaviour, and bleeding of the columns obtained. Similar results as with the cumylperoxid-treatment were achieved using the -radiation-method. By -radiation no polar functional groups or moleculs are introduced into the stationary phase, however, as with the peroxid method. Less than 20% of the various stationary liquids are usually removed from the columns by solvent rising after crosslinking using both methods depending on the doses of radiation and the cumylperoxid concentration applied respectively.Dedicated to Dr. L. S. Ettre on the occasion of his 60th birthday.     

The conformational preferences of γ-lactam and its role in constraining peptide structure

Summary The conformational constraints imposed by -lactams in peptides have been studied using valence force field energy calculations and flexible geometry maps. It has been found that while cyclisation restrains the of the lactam, non-bonded interactions contribute to the constraints on of the lactam. The -lactam also affects the (,) of the residue after it in a peptide sequence. For an l-lactam, the ring geometry restricts to about-120°, and has two minima, the lowest energy around-140° and a higher minimum (5 kcal/mol higher) at 60°, making an l--lactam more favourably accommodated in a near extended conformation than in position 2 of a type II -turn. The energy of the +60° minimum can be lowered substantially until it is more favoured than the-140° minimum by progressive substitution of bulkier groups on the amide N of the l--lactam. The (,) maps of the residue succeeding a -lactam show subtle differences from those of standard N-methylated residues. The dependence of the constraints on the chirality of -lactams and N-substituted -lactams, in terms of the formation of secondary structures like -turns is discussed and the comparison of the theoretical conformations with experimental results is highlighted.     

Comparison of the Complexation of Cosmetical and Pharmaceutical Compounds with γ-Cyclodextrin, 2-Hydroxypropyl-β-cyclodextrin and Water-Soluble β-Cyclodextrin-co-epichlorhydrin Polymers

The ability of different cyclodextrins (CDs): CD, 2-hydroxypropyl CD to complex drugs like 3--hydroxy-11-oxoolean- 12-en-30-oic acid, 2-ethylhexyl-3-(4-methoxyphenyl)-2-propanoate and menthol was compared to that of water-soluble polymers: CD-co-epichlorhydrin polymer (pCD/EP) and CD-co-epichlorhydrin polymer partially modified with trimethylammonium groups (pCD/EPN⁺). 3--Hydroxy-11-oxoolean-12-en-30-oic acid was poorly solubilized by CD compared with other CD derivatives, however the determination of the complexation constants was possible for pCD/EP, K₁₁ = 740, K₁₂ = 4, for pCD/EPN⁺, K₁₁ = 681, for CD, K₁₁ = 16 and for hydroxypropyl CD, K₁₁ = 114, K₁₂ = 3.4. A significant increase of the solubility was observed for 2-ethylhexyl-3-(4-methoxyphenyl)-2-propanoate with all host molecules, it was 916 times its solubility in pure water with pCD/EPN⁺, 1116 and 1300 times with 2-hydroxypropyl CD and pCD/EP respectively. The association constants are K₁₁ = 7970, K₁₁ = 4700, K₁₁ = 1470, K₁₁ = 230 and K₁₂ = 200 with pCD/EP, pCD/EPN⁺, CD, 2-hydroxypropyl CD respectively. An increase of the solubility of menthol was observed with all CD derivatives, up to 36–37 times, except for CD. The complexation constants are similar equal to about 200.     

Reaction of the nitrile of 3,3-diphenyl-2-propenic acid with the carbanions of some α-branched nitriles Short communication

Reaction of the nitrile of 3,3-diphenyl-2-propenic acid with -branched nitriles in the presence of lithium amide in liquid ammonia does not give the correspondingMichael adducts but the ,-unsaturated nitriles6. Conc. sulfuric acid transforms these nitriles into the -lactones7.

---

Reaktion von 3,3-Diphenyl-2-propensäurenitril mit den Carbanionen einiger -verzweigter Nitrile (Kurze Mitteilung)

Zusammenfassung Die Reaktion von 3,3-Diphenyl-2-propensäurenitril mit -verzweigten Nitrilen in Gegenwart von Lithiumamid in flüssigem Ammoniak führt nicht zu den entsprechendenMichael-Addukten, sondern zu den ,-ungesättigten Nitrilen6. Durch Einwirkung von konz. Schwefelsäure entstehen aus diesen Nitrilen die -Lactone7.

     

Nitrosation of mefenorex in the presence of cyclodextrins

- and -Cyclodextrin (CD) and heptakis-2,6-di-O-methyl--cyclodextrin (DIMEB) form soluble inclusion compounds with mefenorex (MEF); with -CD a partial inclusion occurs. No solid inclusion compound could be obtained with the four CDs. -, -CD and DIMEB, but not -CD, enhance the nitrosation rate of MEF if the nitrosation assay procedure (NAP test) is applied. During this reaction with - and -CD, solid inclusion compounds of the CDs and nitrosomefenorex (NMEF) precipitate.Part of the Ph.D. thesis of V. Wedelich, Freie Universität Berlin, 1985.     

Intercalation of porphyrin (TMPyP) and copper-porphyrin into γ-zirconium phosphate

Water-soluble ,,,-tetrakis(4-N-methylpyridyl)porphine(TMPyP) was directly intercalated into -zirconium phosphate (-ZrP) with expansion of the interlayer distance from 12.3 to a maximum of 17.2 Å, indicating parallel orientation of porphyrin to the layer of -ZrP. Diffuse reflectance spectra of the intercalate shows that the porphyrin is protonated in the interlayer space. Uptake of Cu²⁺ ions into the porphyrin intercalate takes place with further increase in the interlayer distance. It was observed that TMPyP metalated Cu²⁺ in -ZrP. Copper porphyrin can also be taken up quite easily and an interlayer spacing of 18.6 Å is attained.     

Surface characterization of modified glass fibers by inverse gas chromatography

The dispersive component of the surface free energy _d ^s of glass fibers and their acid-base interaction can be evaluated by the measurement of specific retention volumes of several kinds of probe molecules by use of an inverse gas chromatography. The effect of the treatment of glass fibers with silane-coupling agents was also evaluated. The specific retention volumes of n-alkanes changed linearly with theirC number or vapor pressure. Those of polar molecules varied with their donor number (DN) or acceptor number (AN). The _s ^d values and electron-accepting or donating abilities depended upon the kind of functional groups contained in the coupling agents.