Electron Attachment to Hydrated Oligonucleotide Dimers: Guanylyl‐3′,5′‐Cytidine and Cytidylyl‐3′,5′‐Guanosine

The dinucleoside phosphate deoxycytidylyl‐3′,5′‐deoxyguanosine (dCpdG) and deoxyguanylyl‐3′,5′‐deoxycytidine (dGpdC) systems are among the largest to be studied by reliable theoretical methods. Exploring electron attachment to these subunits of DNA single strands provides significant progress toward definitive predictions of the electron affinities of DNA single strands. The adiabatic electron affinities of the oligonucleotides are found to be sequence dependent. Deoxycytidine (dC) on the 5′ end, dCpdG, has larger adiabatic electron affinity (AEA, 0.90 eV) than dC on the 3′ end of the oligomer (dGpdC, 0.66 eV). The geometric features, molecular orbital analyses, and charge distribution studies for the radical anions of the cytidine‐containing oligonucleotides demonstrate that the excess electron in these anionic systems is dominantly located on the cytosine nucleobase moiety. The π‐stacking interaction between nucleobases G and C seems unlikely to improve the electron‐capturing ability of the oligonucleotide dimers. The influence of the neighboring base on the electron‐capturing ability of cytosine should be attributed to the intensified proton accepting–donating interaction between the bases. The present investigation demonstrates that the vertical detachment energies (VDEs) of the radical anions of the oligonucleotides dGpdC and dCpdG are significantly larger than those of the corresponding nucleotides. Consequently, reactions with low activation barriers, such as those for O? C σ bond and N‐glycosidic bond breakage, might be expected for the radical anions of the guanosine–cytosine mixed oligonucleotides.     

Efficient Automated Solid‐Phase Synthesis of DNA and RNA 5′‐Triphosphates

A fast, high‐yielding and reliable method for the synthesis of DNA‐ and RNA 5′‐triphosphates is reported. After synthesizing DNA or RNA oligonucleotides by automated oligonucleotide synthesis, 5‐chloro‐saligenyl‐N,N‐diisopropylphosphoramidite was coupled to the 5′‐end. Oxidation of the formed 5′‐phosphite using the same oxidizing reagent used in standard oligonucleotide synthesis led to 5′‐cycloSal‐oligonucleotides. Reaction of the support‐bonded 5′‐cycloSal‐oligonucleotide with pyrophosphate yielded the corresponding 5′‐triphosphates. The 5′‐triphosphorylated DNA and RNA oligonucleotides were obtained after cleavage from the support in high purity and excellent yields. The whole reaction sequence was adapted to be used on a standard oligonucleotide synthesizer.     

Synthesis,Dynamic Combinatorial Chemistry,and PCR Amplification of 3′–5′ and 3′–6′ Disulfide‐linked Oligonucleotides

Disulfide dithymidines linked 3′–5′ or 3′–6′ were synthesized and incorporated into oligonucleotides through a combined phosphotriester and phosphoramidite solid‐phase oligonucleotide synthesis approach. The disulfide links are cleaved and formed reversibly in the presence of thiols and oligonucleotides. This link was shown to be sequence‐adaptive in response to given templates in the presence of mercaptoethanol. The artificial 3′–5′ and 3′–6′ disulfide link was tolerated by polymerases in the polymerase chain reaction (PCR). By using sequencing analysis, we show that single mutations frequently occurred randomly in the amplification products of the PCR.     

Synthesis,Dynamic Combinatorial Chemistry,and PCR Amplification of 3′–5′ and 3′–6′ Disulfide‐linked Oligonucleotides

Disulfide dithymidines linked 3′–5′ or 3′–6′ were synthesized and incorporated into oligonucleotides through a combined phosphotriester and phosphoramidite solid‐phase oligonucleotide synthesis approach. The disulfide links are cleaved and formed reversibly in the presence of thiols and oligonucleotides. This link was shown to be sequence‐adaptive in response to given templates in the presence of mercaptoethanol. The artificial 3′–5′ and 3′–6′ disulfide link was tolerated by polymerases in the polymerase chain reaction (PCR). By using sequencing analysis, we show that single mutations frequently occurred randomly in the amplification products of the PCR.     

Synthesis of Photolabile 5′‐O‐Phosphoramidites for the Photolithographic Production of Microarrays of Inversely Oriented Oligonucleotides

The photolabile 3′‐O‐{[2‐(2‐nitrophenyl)propoxy]carbonyl}‐protected 5′‐phosphoramidites ( 16 – 18 ) were synthesized (see Scheme) for an alternative mode of light‐directed production of oligonucleotide arrays. Because of the characteristics of these monomeric building blocks, photolithographic in situ DNA synthesis occurred in 5′→3′ direction, in agreement with the orientation of enzymatic synthesis. Synthesis yields were as good as those of conventional reactions. The resulting oligonucleotides are attached to the surface via their 5′‐termini, while the 3′‐hydroxy groups are available as substrates for enzymatic reactions such as primer extension upon hybridization of a DNA template (see Fig. 2). The production of such oligonucleotide chips adds new procedural avenues to the growing number of applications of DNA microarrays.     

3′‐Deoxyribopyranose (4′→2′)‐Oligonucleotide Duplexes (=p‐DNA Duplexes) as Substitutes of RNA Hairpin Structures

By automated synthesis, we prepared hybrid oligonucleotides consisting of covalently linked RNA and p‐DNA sequences (p‐DNA=3′‐deoxyribopyranose (4′→2′)‐oligonucleotides) (see Table 1). The pairing properties of corresponding hybrid duplexes, formed from fully complementary single strands were investigated. An uninterrupted π‐π‐stacking at the p‐DNA/RNA interface and cooperative pairing between the two systems was achieved by connecting them via a 4′‐p‐DNA‐2′→5′‐RNA‐3′ and 5′‐RNA‐2′→4′‐p‐DNA‐2′ phosphodiester linkage, respectively (see Fig. 4). The RNA 2′‐phosphoramidites 9 – 12 , required for the formation of the RNA‐2′→4′‐p‐DNA phosphodiester linkage were synthesized from the corresponding, 3′‐O‐tom‐protected ribonucleosides (tom=[(triisopropylsilyl)oxy]methyl; Scheme 1). Analogues of the flavin mononucleotide (=FMN) binding aptamer 22 and the hammerhead ribozyme 25 were prepared. Each of these analogues consisted of two p‐DNA/RNA hybrid single strands with complementary p‐DNA sequences, designed to substitute stem/loop and stem motifs within the parent compounds. By comparative binding and cleavage studies, it was found that mixing of the two complementary p‐DNA/RNA hybrid sequences resulted in the formation of the fully functional analogues 23 ⋅ 24 and 27 ⋅ 28 of the FMN‐binding aptamer and of the hammerhead ribozyme, respectively.     

One‐Step Formation of “Chain‐Armor”‐Stabilized DNA Nanostructures

DNA‐based self‐assembled nanostructures are widely used to position organic and inorganic objects with nanoscale precision. A particular promising application of DNA structures is their usage as programmable carrier systems for targeted drug delivery. To provide DNA‐based templates that are robust against degradation at elevated temperatures, low ion concentrations, adverse pH conditions, and DNases, we built 6‐helix DNA tile tubes consisting of 24 oligonucleotides carrying alkyne groups on their 3′‐ends and azides on their 5′‐ends. By a mild click reaction, the two ends of selected oligonucleotides were covalently connected to form rings and interlocked DNA single strands, so‐called DNA catenanes. Strikingly, the structures stayed topologically intact in pure water and even after precipitation from EtOH. The structures even withstood a temperature of 95 °C when all of the 24 strands were chemically interlocked.     

Covalent Chemical 5′‐Functionalization of RNA with Diazo Reagents

Functionalization of RNA at the 5′‐terminus is important for analytical and therapeutic purposes. Currently, these RNAs are synthesized de novo starting with a chemically functionalized 5′‐nucleotide, which is incorporated into RNA using chemical synthesis or biochemical techniques. Methods for direct chemical modification of native RNA would provide an attractive alternative but are currently underexplored. Herein, we report that diazo compounds can be used to selectively alkylate the 5′‐phosphate of ribo(oligo)nucleotides to give RNA labelled through a native phosphate ester bond. We applied this method to functionalize oligonucleotides with biotin and an orthosteric inhibitor of the eukaryotic initiation factor 4E (eIF4E), an enzyme involved in mRNA recognition. The modified RNA binds to eIF4E, demonstrating the utility of this labelling technique to modulate biological activity of RNA. This method complements existing techniques and may be used to chemically introduce a broad range of functional handles at the 5′‐end of RNA.     

Anomalous electrophoretic migration of short oligodeoxynucleotides labelled with 5′‐terminal Cy5 dyes

By using a fluorescent exonuclease assay, we reported unusual electrophoretic mobility of 5′‐indocarbo‐cyanine 5 (5′‐Cy5) labelled DNA fragments in denaturing polyacrylamide gels. Incubation time and enzyme concentration were two parameters involved in the formation of 5′‐Cy5‐labelled degradation products, while the structure of the substrate was slightly interfering. Replacement of positively charged 5′‐Cy5‐labelled DNA oligonucleotides (DNA oligos) by electrically neutral 5′‐carboxyfluorescein (5′‐FAM) labelled DNA oligos abolished the anomalous migration pattern of degradation products. MS analysis demonstrated that anomalously migrating products were in fact 5′‐labelled DNA fragments ranging from 1 to 8 nucleotides. Longer 5′‐Cy5‐labelled DNA fragments migrated at the expected position. Altogether, these data highlighted, for the first time, the influence of the mass/charge ratio of 5′‐Cy5‐labelled DNA oligos on their electrophoretic mobility. Although obtained by performing 3′ to 5′ exonuclease assays with the family B DNA polymerase from Pyrococcus abyssi, these observations represent a major concern in DNA technology involving most DNA degrading enzymes.     

Type I Photosensitization of 2′‐deoxyadenosine 5′‐monophosphate (5′‐dAMP) by Biopterin and its Photoproduct Formylpterin

Biopterin (Bip) and its photoproducts 6‐formylpterin (Fop) and 6‐carboxypterin (Cap) accumulate in the skin of patients suffering from vitiligo, a chronic depigmentation disorder where the protection against UV radiation fails because of the lack of melanin. These compounds absorb in the UV‐A inducing a potential photosensitizing action that can cause damage to DNA and other biomolecules. In this work, we have investigated the capability of these pterin derivatives (Pt) to act as photosensitizers under UV‐A irradiation for the degradation of 2′‐deoxyadenosine 5′‐monophosphate (5′‐dAMP) in aqueous solutions, as model DNA target. Steady‐state and time‐resolved experiments were performed and the effect of pH was evaluated. The results showed that photosensitized degradation of 5′‐dAMP was only observed under acidic conditions, and a mechanistic analysis revealed the participation of the triplet excited state of the pterin derivatives (³Pt*) by electron transfer yielding the corresponding pair of radical ions (Pt^?? and 5′‐dAMP^?+), with successive photosensitizer recovery by electron transfer from Pt^?? to O₂. Finally, 5′‐dAMP^?+ participates in subsequent reactions to yield degradation products.     

Energetic Derivatives of 4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI)

4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI) was synthesized by nitration of bisimidazole (BI) and recrystallized from acetone to form a crystalline acetone adduct. Its ammonium salt ( 1 ) was obtained by the reaction with gaseous ammonia. In order to explore new explosives or propellants several energetic nitrogen‐rich 2:1 salts such as the hydroxylammonium ( 3 ), guanidinium ( 4 ), aminoguanidinium ( 5 ), diaminoguanidinium ( 6 ) and triaminoguanidinium 7 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate were prepared by facile metathesis reactions. In addition, methylated 1, 1′‐dimethyl‐4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazole (Me₂TNBI, 8 ) was synthesized by the reaction of 2 and dimethyl sulfate. Metal salts of TNBI can also be easily synthesized by using the corresponding metal bases. This was proven by the synthesis of pyrotechnically relevant dipotassium 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate ( 2 ), which is a brilliant burning component e.g. in near‐infrared flares. All compounds were characterized by single crystal X‐ray diffraction, NMR and vibrational spectroscopy, elemental analysis and DSC. The sensitivities were determined by BAM methods (drophammer and friction tester). The heats of formation were calculated using CBS‐4M electronic enthalpies and the atomization method. With these values and mostly the X‐ray densities different detonation parameters were computed by the EXPLO5 computer code. Due to the great thermal stability and calculated energetic properties, especially guanidinium salt 4 could be served as a HNS replacement.     

Spontaneous Aminoacylation of a RNA Sequence Containing a 3′‐Terminal 2′‐Thioadenosine

We report the synthesis of a modified 8mer RNA sequence, (C‐C‐C‐C‐A‐C‐C‐(2′‐thio)A)‐RNA 5′‐(dihydrogen phosphate) ( 9 ) containing a 3′‐terminal 2′‐thioadenosine (Schemes 2 and 3), and its spontaneous and site‐specific aminoacylation with the weakly activated amino acid thioester H Phe SPh ( 12 ). This reaction, designed in analogy to the ‘native chemical ligation’ of oligopeptides, occurs efficiently in buffered aqueous solutions and under a wide range of conditions (Table). At pH values between 5.0 and 7.4, two products, the 3′‐O‐monoacylated and the 3′‐O,2′‐S‐diacylated RNA sequences 10 and 11 are formed fast and quantitatively (Scheme 4). At pH 7.4 and 37°, the 3′‐O‐monoacylated product 10 is formed as major product in situ by selective hydrolysis of the O,S‐diacylated precursor 11 . Additionally, the preparation and isolation of the relevant 3′‐O‐monoacylated product 10 was optimized at pH 5. The here presented concept could be employed for a straightforward aminoacylation of analogously modified tRNAs.     

Nucleotides,Part LXIX,Synthesis of Phosphoramidite Building Blocks of Isoxanthopterin N8‐(2′‐Deoxy‐β‐D‐ribonucleosides): New Fluorescence Markers for Oligonucleotide Synthesis

The chemical synthesis of isoxanthopterin and 6‐phenylisoxanthopterin N⁸‐(2′‐deoxy‐β‐D ‐ribofuranosyl nucleosides) is described as well as their conversion into suitably protected 3′‐phosphoramidite building blocks to be used as marker molecules for DNA synthesis. Applying the npe/npeoc (=2‐(4‐nitrophenyl)ethyl/[2‐(4‐nitrophenyl)ethoxy]carbonyl) strategy, we used the new building blocks in the preparation of oligonucleotides by an automated solid‐support approach. The hybridization properties of a series of labelled oligomers were studied by UV‐melting techniques. It was found that the newly synthesized markers only slightly interfered with the abilities of the labelled oligomers to form stable duplexes with complementary oligonucleotides.     

2′‐Ethynyl‐DNA: Synthesis and Pairing Properties

2‐Ethynyl‐DNA was developed as a potential DNA‐selective oligonucleotide analog. The synthesis of 2′‐arabino‐ethynyl‐modified nucleosides was achieved starting from properly protected 2′‐ketonucleosides by addition of lithium (trimethylsilyl)acetylide followed by reduction of the tertiary alcohol. After a series of protecting‐group manipulations, phosphoramidite building blocks suitable for solid‐phase synthesis were obtained. The synthesis of oligonucleotides from these building blocks was successful when a fast deprotection scheme was used. The pairing properties of 2′‐arabino‐ethynyl‐modified oligonucleotides can be summarized as follows: 1) The 2′‐arabino‐ethynyl modification of pyrimidine nucleosides leads to a strong destabilization in duplexes with DNA as well as with RNA. The likely reason is that the ethynyl group sterically influences the torsional preferences around the glycosidic bond leading to a conformation not suitable for duplex formation. 2) If the modification is introduced in purine nucleosides, no such influence is observed. The pairing properties are not or only slightly changed, and, in some cases (deoxyadenosine homo‐polymers), the desired stabilization of the pairing with a DNA complementary strand and destabilization with an RNA complement is observed. 3) In oligonucleotides of alternating deoxycytidine‐deoxyguanosine sequence, the incorporation of 2′‐arabino‐ethynyl deoxyguanosine surprisingly leads to the formation of a left‐handed double helix, irrespective of salt concentration. The rationalization for this behavior is that the ethynyl group locks such duplexes in a left‐handed conformation through steric blockade.     

Synthesis and Properties of 2′-Deoxy-1′,2′-seco-D-ribosyl (5′ → 3′)oligonucleotides (= 1′,2′-seco-DNA) containing adenine and thymine

Some 2′-deoxy-1′,2′-seco-D-ribosyl (5′→3′)oligonucleotides (= 1′,2′-seco-DNA), differing from natural DNA only by a bond scission between the centers C(1′) and C(2′), were synthesized and studied in order to compare their structure properties and pairing behavior with those of corresponding natural DNA and homo-DNA oligonucleotides (2′,3′-dideoxy-β-D-glucopyranosyl oligonucleotides). Starting from (?)-D-tartaric acid, 2′-deoxy-1′,2′-secoadenosine derivative 9a and 1′,2′-secothymidine ( 9b ) were obtained in pure crystalline form. Using the phosphoramidite variant of the phosphite-triester method, a dinucleotide monophosphate 1′,2′-seco-d(T₂) was synthesized in solution, while oligonucleotides 1′,2′-seco-d[(AT)₆], 1′,2′-seco-d(A₁₀) and 1′,2′-seco-d(T₁₀) were prepared on solid phase with either automated or manual techniques. Results of UV- and CD-spectroscopic as well as gel-electrophoretic studies indicated that neither adenine-thymine base pairing (as observed in natural DNA and homo-DNA), nor the adenine-adenine base pairing (as observed in homo-DNA) was effective in 1′,2′-seco-DNA, Furthermore, hybrid pairing was observed neither between 1′.2′-seco-DNA and natural DNA nor between 1′,2′-seco-DNA and homo-DNA.     

Protein‐Templated Peptide Ligation

Molecular templates bind particular reactants, thereby increasing their effective concentrations and accelerating the corresponding reaction. This concept has been successfully applied to a number of chemical problems with a strong focus on nucleic acid templated reactions. We present the first protein‐templated reaction that allows N‐terminal linkage of two peptides. In the presence of a protein template, ligation reactions were accelerated by more than three orders of magnitude. The templated reaction is highly selective and proved its robustness in a protein‐labeling reaction that was performed in crude cell lysate.     

Dehydrogenative Synthesis of 2,2′‐Bipyridyls through Regioselective Pyridine Dimerization

2,2′‐Bipyridyls have been utilized as indispensable ligands in metal‐catalyzed reactions. The most streamlined approach for the synthesis of 2,2′‐bipyridyls is the dehydrogenative dimerization of unfunctionalized pyridine. Herein, we report on the palladium‐catalyzed dehydrogenative synthesis of 2,2′‐bipyridyl derivatives. The Pd catalysis effectively works with an Ag^I salt as the oxidant in the presence of pivalic acid. A variety of pyridines regioselectively react at the C2‐positions. This dimerization method is applicable for challenging substrates such as sterically hindered 3‐substituted pyridines, where the pyridines regioselectively react at the C2‐position. This reaction enables the concise synthesis of twisted 3,3′‐disubstituted‐2,2′‐bipyridyls as an underdeveloped class of ligands.     

Peptide‐Directed DNA‐Templated Protein Labelling for The Assembly of a Pseudo‐IgM

The development of methods for conjugation of DNA to proteins is of high relevance for the integration of protein function and DNA structures. Here, we demonstrate that protein‐binding peptides can direct a DNA‐templated reaction, selectively furnishing DNA–protein conjugates with one DNA label. Quantitative conversion of oligonucleotides is achieved at low stoichiometries and the reaction can be performed in complex biological matrixes, such as cell lysates. Further, we have used a star‐like pentameric DNA nanostructure to assemble five DNA–Rituximab conjugates, made by our reported method, into a pseudo‐IgM antibody structure that was subsequently characterized by negative‐stain transmission electron microscopy (nsTEM) analysis.