Exploration of a Chiral Cobalt Catalyst for Visible‐Light‐Induced Enantioselective Radical Conjugate Addition

Chiral catalysts tolerating photochemical reactions are in great demand for the vast development of visible‐light‐induced asymmetric synthesis. Now, chiral octahedral complexes based on earth‐abundant metal and chiral N₄ ligands are reported. One well‐defined chiral Co^II‐complex is shown to be an efficient catalyst in the visible‐light‐induced conjugated addition of enones by alkyl and acyl radicals, providing synthetically valued chiral ketones and 1,4‐dicarbonyls in 47–>99 % yields with up to 97:3 e.r.     

Design of Binaphthyl‐Modified Symmetrical Chiral Phase‐Transfer Catalysts: Substituent Effect of 4,4′,6,6′‐Positions of Binaphthyl Rings in the Asymmetric Alkylation of a Glycine Derivative

A series of symmetrical chiral phase‐transfer catalysts with 4,4′,6,6′‐tetrasubstituted binaphthyl units have been designed, and these aryl‐ and trialkylsilyl‐substituted phase‐transfer catalysts, which included a highly fluorinated catalyst, were prepared. The chiral efficiency of these chiral phase‐transfer catalysts was investigated in the asymmetric alkylation of tert‐butylglycinate–benzophenone Schiff base under mild phase‐transfer conditions, and the eminent substituent effect of the 4,4′,6,6′‐positions of the binaphthyl units on enantioselection was observed. In particular, the OctMe₂Si‐substituted catalyst was found to be highly efficient for the phase‐transfer alkylation of tert‐butylglycinate–benzophenone Schiff base with various alkyl halides, including sec‐alkyl halides. The highly fluorinated catalyst was also utilized as a recyclable chiral phase‐transfer catalyst by simple extraction with fluorous solvents.     

Catalytic Asymmetric Synthesis of Alkynyl Aziridines: Both Enantiomers of cis‐Aziridines from One Enantiomer of the Catalyst

Alkynyl aziridines can be obtained from the catalytic asymmetric aziridination (AZ reaction) of alkynyl imines with diazo compounds in high yields and high asymmetric inductions mediated by a chiral boroxinate or BOROX catalyst. In contrast to the AZ reaction with aryl‐ and alkyl‐substituted imines, alkynyl imines react to give cis‐substituted aziridines with both diazo esters and diazo acetamides. Remarkably, however, the two diazo compounds give different enantiomers of the cis‐aziridine from the same enantiomer of the catalyst. Theoretical considerations of the possible transition states for the enantiogenic step reveal that the switch in enantiomers results from a switch from Si‐face to Re‐face addition to the imine, which in turn is related to a switch from reaction with an E‐imine in the former and a Z‐isomer of the imine in the latter.     

SiO2 Nanoparticle‐catalyzed Facile and Efficient One‐pot Synthesis of N‐alkyl‐2,5‐bis[(E)‐2‐phenylvinyl]‐1,3‐dioxol‐4‐amine Under Solvent‐free Conditions

1,3‐Dioxole‐4‐amine derivatives have been prepared efficiently in one‐pot reaction using nanosized SiO₂ as a heterogeneous catalyst. The present method does not involve any hazardous organic solvents or catalysts. The high surface‐to‐volume ratio of SiO₂ nanoparticle has promising features for the reaction response such as the short reaction time, good to excellent yields, easy of operation and work‐up procedure, and purification of products by non‐chromatographic methods.     

Vaulted Biaryls in Catalysis: A Structure–Activity Relationship Guided Tour of the Immanent Domain of the VANOL Ligand

The active site in the BOROX catalyst is a chiral polyborate anion (boroxinate) that is assembled in situ from three equivalents of B(OPh)₃ and one of the VANOL ligand by a molecule of substrate. The substrates are bound to the boroxinate by H bonds to oxygen atoms O1–O3. The effects of introducing substituents at each position of the naphthalene core of the VANOL ligand are systematically investigated in an aziridination reaction. Substituents in the 4,4′‐ and 8,8′‐positions have a negative effect on catalyst performance, whereas, substituents in the 7‐ and 7′‐positions have the biggest impact in a positive direction.     

Modulation of Multifunctional N,O,P Ligands for Enantioselective Copper‐Catalyzed Conjugate Addition of Diethylzinc and Trapping of the Zinc Enolate

In this work, we have successfully synthesized a new family of chiral Schiff base–phosphine ligands derived from chiral binaphthol (BINOL) and chiral primary amine. The controllable synthesis of a novel hexadentate and tetradentate N,O,P ligand that contains both axial and sp³‐central chirality from axial BINOL and sp³‐central primary amine led to the establishment of an efficient multifunctional N,O,P ligand for copper‐catalyzed conjugate addition of an organozinc reagent. In the asymmetric conjugate reaction of organozinc reagents to enones, the polymer‐like bimetallic multinuclear Cu? Zn complex constructed in situ was found to be substrate‐selective and a highly excellent catalyst for diethylzinc reagents in terms of enantioselectivity (up to >99 % ee). More importantly, the chirality matching between different chiral sources, C₂‐axial binaphthol and sp³‐central chiral phosphine, was crucial to the enantioselective induction in this reaction. The experimental results indicated that our chiral ligand (R,S,S)‐ L1 ‐ and (R,S)‐ L4 ‐based bimetallic complex catalyst system exhibited the highest catalytic performance to date in terms of enantioselectivity and conversion even in the presence of 0.005 mol % of catalyst (S/C=20 000, turnover number (TON)=17 600). We also studied the tandem silylation or acylation of enantiomerically enriched zinc enolates that formed in situ from copper‐ L4 ‐complex‐catalyzed conjugate addition, which resulted in the high‐yield synthesis of chiral silyl enol ethers and enoacetates, respectively. Furthermore, the specialized structure of the present multifunctional N,O,P ligand L1 or L4 , and the corresponding mechanistic study of the copper catalyst system were investigated by ³¹P NMR spectroscopy, circular dichroism (CD), and UV/Vis absorption.     

Chiral Calcium–BINOL Phosphate Catalyzed Diastereo‐ and Enantioselective Synthesis of syn‐1,2‐Disubstituted 1,2‐Diamines: Scope and Mechanistic Studies

A highly enantioselective, chiral, Lewis acid calcium–bis(phosphate) complex, Ca[ 3 a ]_n, which catalyzes the electrophilic amination of enamides with azodicarboxylate derivatives 2 to provide versatile chiral 1,2‐hydrazinoimines 4 is disclosed. The reaction gives an easy entry to optically active syn‐1,2‐disubstituted 1,2‐diamines 6 in high yields with excellent enantioselectivities, after a one‐pot reduction of the intermediate 1,2‐hydrazinoimines 4 . The geometry and nature of the N‐substituent of the enamide affect dramatically both the reactivity and the enantioselectivity. Although the calcium–bis(phosphate) complex was a uniquely effective catalyst, the exact nature of the active catalytic species remains unclear. NMR spectroscopy and MS analysis of the various calcium complexes Ca[ 3 ]_n reveals that the catalysts exist in various oligomer forms. The present mechanistic study, which includes nonlinear effects and kinetic measurements, constitutes a first step in understanding these calcium–bis(phosphate) complex catalysts. DFT calculations were carried out to explore the mechanism and the origin of the enantioselectivity with the Ca[ 3 ]_n catalysts.     

Double Stereodifferentiation in the Catalytic Asymmetric Aziridination of Imines Prepared from α‐Chiral Amines

The catalytic asymmetric aziridination of imines and diazo compounds (AZ reaction) mediated by boroxinate catalysts derived from the VANOL and VAPOL ligands was investigated with chiral imines derived from five different chiral, disubstituted, methyl amines. The strongest matched and mismatched reactions with the two enantiomers of the catalyst were noted with disubstituted methyl amines that had one aromatic and one aliphatic substituent. The synthetic scope for the AZ reaction was examined in detail for α‐methylbenzyl amine for cis‐aziridines from α‐diazo esters and for trans‐aziridines from α‐diazo acetamides. Optically pure aziridines could be routinely obtained in good yields and with high diastereoselectivity and the minor diastereomer (if any) could be easily separated. The matched case for cis‐aziridines involved the (R)‐amine with the (S)‐ligand, but curiously, for trans‐aziridines the matched case involved the (R)‐amine with the (R)‐ligand for imines derived from benzaldehyde and n‐butanal, and the (R)‐amine with the (S)‐ligand for imines derived from the bulkier aliphatic aldehydes pivaldehyde and cyclohexane carboxaldehyde.     

One‐Pot Organocatalytic Asymmetric Synthesis of 3‐Nitro‐1,2‐dihydroquinolines by a Dual‐Activation Protocol

Generally, amine‐catalyzed enantioselective transformations rely on chiral enamine or unsaturated iminium intermediates. Herein, we report a protocol involving dual activation by an aromatic iminium and hydrogen‐bonding. An enantioselective aza‐Michael–Henry domino reaction of 2‐aminobenzaldehydes with nitroolefins has been developed through this protocol using primary amine thiourea catalysts to provide a variety of 3‐nitro‐1,2‐dihydroquinolines in moderate yields and with up to 90 % ee. The mechanism for the catalytic enantioselective reaction was confirmed by ESI mass spectrometric detection of the reaction intermediates. The products formed are substructures found in skeletons of important biological and pharmaceutical molecules.     

Secondary Amine‐Catalyzed Asymmetric γ‐Alkylation of α‐Branched Enals via Dienamine Activation

The direct and enantioselective γ‐alkylation of α‐substituted α,β‐unsaturated aldehydes proceeding under dienamine catalysis is described. We have found that the Seebach modification of the diphenyl‐prolinol silyl ether catalyst in combination with saccharin as an acidic additive promotes an S_N1 alkylation pathway, while ensuring complete γ‐site selectivity and a high stereocontrol. Theoretical and spectroscopic investigations have provided insights into the conformational behavior of the covalent dienamine intermediate derived from the condensation of 2‐methylpent‐2‐enal and the chiral amine. Implications for the mechanism of stereoinduction are discussed.     

Polymer‐Supported Enantioselective Bifunctional Catalysts for Nitro‐Michael Addition of Ketones and Aldehydes

Introduction of an L ‐amino acid as a spacer and a urea‐forming moiety in a polymer‐supported bifunctional urea–primary amine catalyst, based on (1R, 2R)‐(+)‐1,2‐diphenylethylenediamine, significantly improves the catalyst’s activity and stereoselectivity in the asymmetric addition of ketones and aldehydes to nitroolefins. Yields and enantioselectivities, unprecedented for immobilized catalysts, were obtained with such challenging donors as acetone, cyclopentanone, and α,α‐disubstituted aldehydes, which usually perform inadequately in this reaction (particularly when a secondary‐amine‐based catalyst is used). Remarkably, though in the examined catalysts the D ‐amino acids as spacers were significantly inferior to the L isomers, for the chosen configuration of the diamine (match–mismatch pairs) the size of the side chain of the amino acid hardly influenced the enantioselectivity of the catalyst. These results, combined with the reactivity profile of the catalysts with substrates bearing two electron‐withdrawing groups and the behavior of the catalysts’ analogues based on tertiary (rather than primary) amine, suggest an enamine‐involving addition mechanism and a particular ordered C? C bond‐forming transition state as being responsible for the catalytic reactions with high enantioselectivity.     

Polymer supported copper(II) amine‐imine complexes in the C‐N and A3 coupling reactions

New polymer supported Cu(II) complexes based on an epoxy functionalized gel type resin were prepared using the multi‐stage procedures. The reactions of epoxy groups with ethylenediamine or tris(2‐aminoethyl)amine, and then NH₂ groups with salicylaldehydes were used for the preparation of a series of amine‐imine functionalized polymer supports. Copper(II) acetate was used as a source of metal ions. The complexes were characterized using ICP‐OES, FTIR, DR UV–Vis and TGA techniques, and tested as catalysts in two model C‐N and a series of A³ coupling reactions. Their catalytic activity was rather low in the C‐N coupling reactions between imidazole and iodobenzene or phenylboronic acid. However, the second of the reactions could be conducted effectively under milder conditions. The complexes were efficient used as recyclable catalysts in the A³ coupling reactions. A series of aromatic aldehydes and secondary amines and phenylacetylene could be coupled using 1% mol catalyst.     

Transition‐Metal‐Free Hydrogen Autotransfer: Diastereoselective N‐Alkylation of Amines with Racemic Alcohols

A practical method for the synthesis of α‐chiral amines by alkylation of amines with alcohols in the absence of any transition‐metal catalysts has been developed. Under the co‐catalysis of a ketone and NaOH, racemic secondary alcohols reacted with Ellman's chiral tert‐butanesulfinamide by a hydrogen autotransfer process to afford chiral amines with high diastereoselectivities (up to >99:1). Broad substrate scope and up to a 10 gram scale production of chiral amines were demonstrated. The method was applied to the synthesis of chiral deuterium‐labelled amines with high deuterium incorporation and optical purity, including examples of chiral deuterated drugs. The configuration of amine products is found to be determined solely by the configuration of the chiral tert‐butanesulfinamide regardless of that of alcohols, and this is corroborated by DFT calculations. Further mechanistic studies showed that the reaction is initiated by the ketone catalyst and involves a transition state similar to that proposed for the Meerwein–Ponndorf–Verley (MPV) reduction, and importantly, it is the interaction of the sodium cation of the base with both the nitrogen and oxygen atoms of the sulfinamide moiety that makes feasible, and determines the diastereoselectivity of, the reaction.     

Methyl‐Selective α‐Oxygenation of Tertiary Amines to Formamides by Employing Copper/Moderately Hindered Nitroxyl Radical (DMN‐AZADO or 1‐Me‐AZADO)

Methyl‐selective α‐oxygenation of tertiary amines is a highly attractive approach for synthesizing formamides while preserving the amine substrate skeletons. Therefore, the development of efficient catalysts that can advance regioselective α‐oxygenation at the N‐methyl positions using molecular oxygen (O₂) as the terminal oxidant is an important subject. In this study, we successfully developed a highly regioselective and efficient aerobic methyl‐selective α‐oxygenation of tertiary amines by employing a Cu/nitroxyl radical catalyst system. The use of moderately hindered nitroxyl radicals, such as 1,5‐dimethyl‐9‐azanoradamantane N‐oxyl (DMN‐AZADO) and 1‐methyl‐2‐azaadamanane N‐oxyl (1‐Me‐AZADO), was very important to promote the oxygenation effectively mainly because these N‐oxyls have longer life‐times than less hindered N‐oxyls. Various types of tertiary N‐methylamines were selectively converted to the corresponding formamides. A plausible reaction mechanism is also discussed on the basis of experimental evidence, together with DFT calculations. The high regioselectivity of this catalyst system stems from steric restriction of the amine‐N‐oxyl interactions.     

Stereoelectronic Effects in Ligand Design: Enantioselective Rhodium‐Catalyzed Hydrogenation of Aliphatic Cyclic Tetrasubstituted Enamides and Concise Synthesis of (R)‐Tofacitinib

We herein report the development of a conformationally defined, electron‐rich, C₂‐symmetric, P‐chiral bisphosphorus ligand, ArcPhos, by taking advantage of stereoelectronic effects in ligand design. With the Rh‐ArcPhos catalyst, excellent enantioselectivities and unprecedentedly high turnovers (TON up to 10 000) were achieved in the asymmetric hydrogenation of aliphatic carbocyclic and heterocyclic tetrasubstituted enamides, to generate a series of chiral cis‐2‐alkyl‐substituted carbocyclic and heterocyclic amine derivatives in excellent enantiomeric ratios. This method also enabled an efficient and practical synthesis of the Janus kinase inhibitor (R)‐tofacitinib.     

Low‐Valent Ruthenium Induced Simultaneous Reduction of Nitro Group and C‐C Double Bond in Nitroolefin 1‐Phenyl‐2‐Nitropropene‐1

The reduction of 1‐phenyl‐2‐nitropropene‐1 ( 1 ) on using ruthenium complexes was studied in detail in order to correlate this method with those previously recorded in the literature for the hydrogenation of nitroolefins. A variety of products was isolated by varying the reaction temperature and solvent. Among them was 1‐phenyl‐2‐propylamine ( 4 ), completely reduced from the selective both double bond and nitro group. 1‐Phenyl‐2‐propanol ( 5 ) was observed due to reduction of phenylacetone at 125 °C in the presence of ruthenium catalyst. When reaction temperature was lower than 125 °C, by employing RuCl₂(PPh₃)₃ complex, 1‐phenyl‐2‐nitropropane ( 2 ) and phenylacetone ( 3 ) were obtained, respectively. Ru‐BINAP complexes were attempted to produce chiral amine from starting material 1‐phenyl‐2‐nitropropene‐1 ( 1 ).     

Enhancement of the Catalytic Activity of Chiral H8‐BINOL Titanium Complexes by Introduction of Sterically Demanding Groups at the 3‐Position

The activity of chiral titanium catalysts derived from H₈‐BINOL ligands in the enantioselective arylation of an aldehyde with PhTi(OiPr)₃ is significantly enhanced by an increase of the size of the substituent at the 3‐position. High enantioselectivity (> 90 % ee) can be obtained even at a substrate/catalyst ratio (S/C) of 800 for DTBP‐H₈‐BINOL (DTBP=3,5‐di‐tert‐butylphenyl) and DAP‐H₈‐BINOL (DAP=3,5‐di(9‐anthraceny)phenyl). These titanium catalysts are successfully applied to the enantioselective arylation and heteroarylation of aldehydes at a S/C ratio of 400 by using organotitanium reagents generated in situ from bromide precursors. The remarkable weakening of the intramolecular aggregation of the two ?Ti(OiPr)₃ units in a DPP‐H₈‐BINOL (DPP=3,5‐diphenylpheny)‐derived bis‐titanium complex is revealed by X‐ray and variable‐temperature (VT)‐NMR studies. Based on these observations, a catalytic cycle, involving the rate‐limiting aryl group transfer followed by aldehyde complexation and enantioselective arylation, is proposed to account for the high activity of the 3‐substituted H₈‐BINOL catalyst system.     

Efficient Cluster‐Based Catalysts for Asymmetric Hydrogenation of α‐Unsaturated Carboxylic Acids

The new clusters [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)], [H₄Ru₄(CO)₁₀(1,1‐P‐P)] and [H₄Ru₄(CO)₁₁(P‐P)] (P‐P=chiral diphosphine of the ferrocene‐based Josiphos or Walphos ligand families) have been synthesised and characterised. The crystal and molecular structures of eleven clusters reveal that the coordination modes of the diphosphine in the [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)] clusters are different for the Josiphos and the Walphos ligands. The Josiphos ligands bridge a metal–metal bond of the ruthenium tetrahedron in the “conventional” manner, that is, with both phosphine moieties coordinated in equatorial positions relative to a triangular face of the tetrahedron, whereas the phosphine moieties of the Walphos ligands coordinate in one axial and one equatorial position. The differences in the ligand size and the coordination mode between the two types of ligands appear to be reflected in a relative propensity for isomerisation; in solution, the [H₄Ru₄(CO)₁₀(1,1‐Walphos)] clusters isomerise to the corresponding [H₄Ru₄(CO)₁₀(μ‐1,2‐Walphos)] clusters, whereas the Josiphos‐containing clusters show no tendency to isomerisation in solution. The clusters have been tested as catalysts for asymmetric hydrogenation of four prochiral α‐unsaturated carboxylic acids and the prochiral methyl ester (E)‐methyl 2‐methylbut‐2‐enoate. High conversion rates (>94 %) and selectivities of product formation were observed for almost all catalysts/catalyst precursors. The observed enantioselectivities were low or nonexistent for the Josiphos‐containing clusters and catalyst (cluster) recovery was low, suggesting that cluster fragmentation takes place. On the other hand, excellent conversion rates (99–100 %), product selectivities (99–100 % in most cases) and good enantioselectivities, reaching 90 % enantiomeric excess (ee) in certain cases, were observed for the Walphos‐containing clusters, and the clusters could be recovered in good yield after completed catalysis. Results from high‐pressure NMR and IR studies, catalyst poisoning tests and comparison of catalytic properties of two [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)] clusters (P‐P=Walphos ligands) with the analogous mononuclear catalysts [Ru(P‐P)(carboxylato)₂] suggest that these clusters may be the active catalytic species, or direct precursors of an active catalytic cluster species.     

PC‐Activated Bimetallic Rhodium Xantphos Complexes: Formation and Catalytic Dehydrocoupling of Amine–Boranes

{Rh(xantphos)}‐based phosphido dimers form by P? C activation of xantphos (4,5‐bis(diphenylphosphino)‐9,9‐dimethylxanthene) in the presence of amine–boranes. These dimers are active dehydrocoupling catalysts, forming polymeric [H₂BNMeH]_n from H₃B?NMeH₂ and dimeric [H₂BNMe₂]₂ from H₃B?NMe₂H at low catalyst loadings (0.1 mol %). Mechanistic investigations support a dimeric active species, suggesting that bimetallic catalysis may be possible in amine–borane dehydropolymerization.     

Enantioselective Radical‐Polar Crossover Reactions of Indanonecarboxamides with Alkenes

Highly efficient asymmetric intermolecular radical‐polar crossover reactions were realized by combining a chiral N,N′‐dioxide/Ni^II complex catalyst with Ag₂O under mild reaction conditions. Various terminal alkenes and indanonecarboxamides/esters underwent radical addition/cyclization reactions to afford spiro‐iminolactones and spirolactones with good to excellent yields (up to 99 %) and enantioselectivities (up to 97 % ee). Furthermore, a range of different radical‐mediated oxidation/elimination or epoxide ring‐opening products were obtained under mild reaction conditions. The Lewis acid catalysts exhibited excellent performance and precluded the strong background reaction.