REAuAl4Ge2 and REAuAl4(AuxGe1−x)2 (RE=rare earth element): Quaternary intermetallics grown in liquid aluminum

The two families of intermetallic phases REAuAl₄Ge₂ (1) (RE=Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Tm and Yb) and REAuAl₄(Au_xGe_1−x)₂ (2) (x=0.4) (RE=Ce and Eu) were obtained by the reactive combination of RE, Au and Ge in liquid aluminum. The structure of (1) adopts the space group R-3m (CeAuAl₄Ge₂, , ; NdAuAl₄Ge₂, , ; GdAuAl₄Ge₂, , ; ErAuAl₄Ge₂, , ). The structure of (2) adopts the tetragonal space group P4/mmm with lattice parameters: , for EuAuAl₄(Au_xGe_1−x)₂ (x=0.4). Both structure types present slabs of “AuAl₄Ge₂” or “AuAl₄(Au_xGe_1−x)₂” stacking along the c-axis with layers of RE atoms in between. Magnetic susceptibility measurements indicate that the RE atoms (except for Ce and Eu) possess magnetic moments consistent with +3 species. The Ce atoms in CeAuAl₄Ge₂ and CeAuAl₄(Au_xGe_1−x)₂ (x=0.4) appear to be in a mixed +3/+4 valence state; DyAuAl₄Ge₂ undergoes an antiferromagnetic transition at 11 K and below this temperature exhibits metamagnetic behavior. The Eu atoms in EuAuAl₄(Au_xGe_1−x)₂ (x=0.4) appear to be in a 2+ oxidation state.     

Crystal structures and cation ordering of Sr2AlSbO6 and Sr2CoSbO6

The two double perovskite oxides Sr₂AlSbO₆ and Sr₂CoSbO₆ were prepared and their structures studied with the X-ray powder diffraction method. At room temperature the crystal structure of Sr₂AlSbO₆ is cubic , with . It was found that depending on the preparation conditions, the Al³⁺ and Sb⁵⁺ cations can be either entirely or partially ordered. In the case of the partially ordered Sr₂AlSbO₆ sample, the extension of cation ordering was estimated from the -dependent broadening of the diffraction peaks and the results were interpreted as evidence of the formation of anti-phase domains in the material. Low-temperature Raman spectroscopic measurements demonstrated that the cubic phase of Sr₂AlSbO₆ is stable down to 79 K.The room-temperature crystal structure of Sr₂CoSbO₆ is trigonal (space group with and . At 470 K, however, the material undergoes a continuous phase transition and its structure is converted to cubic (space group . The studied Sr₂CoSbO₆ sample was partially ordered, but unlike Sr₂AlSbO₆, no indication of the formation of anti-phase domains was observed.     

Defect structure of Sb2−xFexTe3 single crystals

Single crystals of Sb_2−xFe_xTe₃ (c_Fe=0-9.5×10¹⁹ cm⁻³) were prepared by Bridgman method. The interpretation of the reflection spectra in plasma resonance region indicates that Fe increases the concentration of holes (acceptor) and each Fe atom incorporated in Sb₂Te₃ structure liberates 0.4-0.5 hole. Observed effect is elucidated by means of point defect model. According to the model Fe atoms enter the structure and form uncharged substitutional defects . Since this defect cannot affect the free-carrier concentration directly, we assume an interaction of the entering Fe-atoms with natives defects leading to a rise in the concentration of antisite defects , to a decrease of concentration, and to an increase in the concentration of holes.     

Synthesis and magnetic properties of the quasi-one-dimensional compound Ca0.83(Cu1−xCox)O2

A new solid solution of the quasi-one-dimensional composite crystal, , has been synthesized under of O₂ at 830°C. The non-doped compound Ca_0.83CuO₂ consists of two interpenetrating monoclinic subsystems of the [Ca] atoms and the edge-shared square planar [CuO₂] chains. Upon increasing x, both the subsystems undergo a phase change from monoclinic to orthorhombic (M-O). The M-O change occurs at x∼0.04 for the [(Cu,Co)O₂] subsystem, while such a change occurs at x∼0.17 for the [Ca] subsystem. Magnetic susceptibility measurements show an evolution from a short-range ordered state near x=0 to a long-range antiferromagnetic state for the samples with x?0.15. The effective magnetic moment μ_eff is found to increase with increasing x from for x=0.10 to for x=0.30, suggesting that the solid solution can be regarded as Ca_0.83[Cu_0.66²⁺Cu_0.34−x³⁺Co_x³⁺]O₂, in which a mixed state of Cu²⁺(S=1/2), Cu³⁺(S=0) and high-spin Co³⁺(S=2) ions is realized.     

Crystal structures of Rb2U2O7 and Rb8U9O31, a new layered rubidium uranate

Two alkali metal uranates Rb₂U₂O₇ and Rb₈U₉O₃₁ have been synthesized by solid state reaction at high temperature and their crystal structures determined from single crystal X-ray diffraction data, collected with a three circles Brucker SMART diffractometer equipped by Mo(Kα) radiation and a charge-coupled device (CCD) detector. Their structures were solved using direct methods and Fourier difference techniques and refined by a least-square method on the basis of F² for all unique reflections, with R₁=0.043 for 53 parameters and 746 independent reflections with I?2σ(I) for Rb₂U₂O₇, monoclinic symmetry, space group P2₁/c, , , , β=108.81(1)°, , , Z=2 and R₁=0.036 for 141 parameters and 2065 independent reflections with I?2σ(I) for Rb₈U₉O₃₁, orthorhombic, space group Pbna, , , , , , Z=4.The Rb₂U₂O₇ structure presents a strong analogy with that of K₂U₂O₇ and can be described by layers of distorted UO₂(O₄) octahedra built from dimeric units of edge shared octahedra further linked together by opposite corners. In Rb₈U₉O₃₁ puckered layers are formed by the association of two different uranium polyhedra, pentagonal bipyramids and distorted octahedra. The structure of Rb₈U₉O₃₁ is built from a regular succession of infinite ribbons similar to those observed in diuranates M₂U₂O₇ (MK, Rb) and infinite three polyhedra wide ribbons , to create an original undulated sheets .For both compounds Rb⁺ ions occupy the interlayer space and exhibit comparable mobility with conductivity measurements indicating an Arrhenius-type behavior.     

Synthesis and structure of three manganese oxalates: MnC2O4·2H2O, [C4H8(NH2)2][Mn2(C2O4)3] and Mn2(C2O4)(OH)2

Three manganese oxalates have been hydrothermally synthesized, and their structures determined by single-crystal X-ray diffraction. MnC₂O₄·2H₂O (I) is orthorhombic, P2₁2₁2₁, , , , , Z=4, final R, R_w=0.0832, 0.1017 for 561 observed data (I>3σ(I)). The one-dimensional structure consists of chains of oxalate-bridged manganese centers. [C₄H₈(NH₂)₂][Mn₂(C₂O₄)₃] (II) is triclinic, , , , , α=81.489(2)°, β=81.045(2)°, γ=86.076(2)°, , Z=1, final R, R_w=0.0467, 0.0596 for 1773 observed data (I > 3σ (I)). The three-dimensional framework is constructed from seven coordinate manganese and oxalate anions. The material contains extra-framework diprotonated piperazine cations. Mn₂(C₂O₄)(OH)₂ (III) is monoclinic, P2₁/c, , , , β=91.10(3)°, , Z=1, final R₁, wR2=0.0710, 0.1378 for 268 observed data (I>2σ (I)). The structure is also three dimensional, with layers of MnO₆ octahedra pillared by oxalate anions. The hydroxide group is found bonded to three manganese centers resulting in a four coordinate oxygen.     

Synthesis, structure, band gap, and electronic structure of CsAgSb4S7

The compound CsAgSb₄S₇ has been synthesized by the reaction of the elements in a Cs₂S₃ flux at 773 K. The compound crystallizes in a new structure type with eight formula units in space group C2/c of the monoclinic system in a cell at 153 K of dimensions , , , β=97.650(1)°, and . The structure contains two-dimensional layers separated by Cs atoms. Each layer is built from edge-sharing one-dimensional and chains. Each Ag atom is tetrahedrally coordinated to four S atoms. Each Sb³⁺ center is pyramidally coordinated to three S atoms to form an SbS₃ group. CsAgSb₄S₇ is insulating with an optical band gap of 2.04 eV. Extended Hückel calculations indicate that the band gap in CsAgSb₄S₇ is dominated by the Sb 5s and S 3p states above and below the Fermi level.     

Low-temperature flux syntheses and characterizations of two 1-D anhydrous borophosphates: Na3B6PO13 and Na3BP2O8

Two new anhydrous sodium borophosphates with one-dimensional structure, Na₃B₆PO₁₃(1) and Na₃BP₂O₈(2), were synthesized by low-temperature molten salts techniques using boric acid and sodium dihydrogen phosphate as flux, respectively. The crystal structures were solved by means of single-crystal X-ray diffraction (1, orthorhombic, Pnma (no. 62), , , , Z=4; 2 , monoclinic, C2/c (no. 15), , , , β=92.492(5)°, Z=8). Compound 1 is characterized by an infinite chain of containing eight-membered rings in which all vertexes of borate groups contribute to interconnection. Compound 2 reveals an infinite straight chain built of vertex-sharing four-membered rings, and chains in neighboring layers arranged along different orientations. The relations between structures and the synthetic conditions with only traced water are discussed.     

Structural and conductivity studies of CsKSO4Te(OH)6 and Rb1.25K0.75SO4Te(OH)6 materials

The crystal structures of the title compounds were solved using the single-crystal X-ray diffraction technique. At room temperature CsKSO₄Te(OH)₆ was found to crystallize in the monoclinic system with Pn space group and lattice parameters: ; ; ; β=106.53(2)°; ; Z=4 and . The structural refinement has led to a reliability factor of R₁=0.0284 (wR₂=0.064) for 7577 independent reflections. Rb_1.25K_0.75SO₄Te(OH)₆ material possesses a monoclinic structure with space group P2₁/a and cell parameters: ; ; ; β=106.860(10)°; ; Z=4 and . The residuals are R₁=0.0297 and wR₂=0.0776 for 3336 independent reflections. The main interest of these structures is the presence of two different and independent anionic groups (TeO₆⁶⁻ and SO₄²⁻) in the same crystal.Complex impedance measurements (Z^*=Z^′—iZ^″) have been undertaken in the frequency and temperature ranges 20-10⁶ Hz and 400-600 K, respectively. The dielectric relaxation is studied in the complex modulus formalism M^*.     

A universally applicable composite modulated structure approach to ordered BaxMyTi8−yO16 hollandite-type solid solutions

A wide range of barium titanate hollandites of the form (M=Zn, Co, Mg, Fe and Mn) and (M=Fe) with nominal x ranging from 1.0 to 1.4 have been synthesized and examined to investigate the solid solution range and the nature of the ordering of the Ba ions. Electron diffraction studies confirm that the barium titanate hollandites are composite modulated single phase solid solutions made up of mutually incommensurable (along b) framework and Ba ion sub-structures. The overall superspace group symmetry was found to be I′2/m(0,,0)1. The symbol I′ here refers to the superspace centering operation (see below). Both the framework and the Ba sub-structures have the same I2/m average structure space group symmetry. The solid solution ranges for the hollandites were calculated from the positions of well-defined superlattice peaks in X-ray diffraction patterns. The effect of cooling rate on Ba ion ordering is also examined.     

In3Ir3B, In3Rh3B and In5Ir9B4, the first indium platinum metal borides

The first indium platinum metal borides have been synthesized and structurally characterized by single crystal X-ray diffraction data. In₃Ir₃B and In₃Rh₃B are isotypic. They crystallize with the hexagonal space group and Z=1. The lattice constants are , for In₃Ir₃B and , for In₃Rh₃B. The structure which is derived from the Fe₂P type is characterized by columns of boron centered triangular platinum metal prisms inserted in a three-dimensional indium matrix. The indium atoms are on split positions. In₅Ir₉B₄ (hexagonal, space group , , , Z=1) crystallizes with a structure derived from the CeCo₃B₂ type. The structure can be interpreted as a layer as well as a channel structure. In part the indium atoms are arranged at the vertices of a honeycomb net (Schlaefli symbol 6³) separating slabs consisting of double layers of triangular Ir₆B prisms, and in part they form a linear chain in a hexagonal channel formed by iridium prisms and indium atoms of the honeycomb lattice.     

Phase transitions in Ca3(BN2)2 and Sr3(BN2)2

α-Ca₃(BN₂)₂ crystallizes in the cubic system (space group: ) with one type of calcium ions disordered over of equivalent (8c) positions. An ordered low-temperature phase (β-Ca₃(BN₂)₂) was prepared and found to crystallize in the orthorhombic system (space group: Cmca) with lattice parameters: , , and . Structure refinements on the basis of X-ray powder data have revealed that orthorhombic β-Ca₃(BN₂)₂ corresponds to an ordered super-structure of cubic α-Ca₃(BN₂)₂. The space group Cmca assigned for β-Ca₃(BN₂)₂ is derived from by a group-subgroup relationship.DSC measurements and temperature-dependent in situ X-ray powder diffraction studies showed reversible phase transitions between β- and α-Ca₃(BN₂)₂ with transition temperatures between 215 and 240 °C.The structure Sr₃(BN₂)₂ was reported isotypic with α-Ca₃(BN₂)₂ () with one type of strontium ions being disordered over of equivalent (2c) positions. In addition, a primitive () structure has been reported for Sr₃(BN₂)₂. Phase stability studies on Sr₃(BN₂)₂ revealed a phase transition between a primitive and a body-centred lattice around 820 °C. The experiments showed that both previously published structures are correct and can be assigned as α-Sr₃(BN₂)₂ (, high-temperature phase), and β-Sr₃(BN₂)₂ (, low-temperature phase).A comparison of Ca₃(BN₂)₂ and Sr₃(BN₂)₂ phases reveals that the different types of cation disordering present in both of the cubic α-phases () have a directing influence on the formation of two distinct (orthorhombic and cubic) low-temperature phases.     

(NH3CH2CH2NH3)B6O9(OH)2: Synthesis and crystal structure of a novel layered borate templated by ethylenediamine

A novel intercalated borate compound (NH₃CH₂CH₂NH₃)B₆O₉(OH)₂, has been solvothermally synthesized, and structurally characterized by single crystal X-ray diffraction. Compound crystallizes in the monoclinic, space group P2(1)/c, , , , β=93.32(3)°, , Z=4. Its oxoborate structure is built up from 1-D polyborate chains with 3, 11-membered boron rings bonded diamine molecules through electrostatic attraction and hydrogen bond interactions to construct 2-D layered compound. Other characterizations by IR, element analysis, thermal analysis and specific surface area are also discussed.     

Structures of the reduced niobium oxides Nb12O29 and Nb22O54

The crystal structure of Nb₂₂O₅₄ is reported for the first time, and the structure of orthorhombic Nb₁₂O₂₉ is reexamined, resolving previous ambiguities. Single crystal X-ray and electron diffraction were employed. These compounds were found to crystallize in the space groups P2/m (, , , β=102.029(3)^°) and Cmcm (, , ), respectively and share a common structural unit, a 4×3 block of corner sharing NbO₆ octahedra. Despite different constraints imposed by symmetry these blocks are very similar in both compounds. Within a block, it is found that the niobium atoms are not located in the centers of the oxygen octahedra, but rather are displaced inward toward the center of the block forming an apparent antiferroelectric state. Bond valence sums and bond lengths do not show the presence of charge ordering, suggesting that all 4d electrons are delocalized in these compounds at the temperature studied, T=200 K.     

Structural and electronic phase transitions in Sr1−xCexMnO3 perovskites

The structures of eight members of the series Sr_1−xCe_xMnO₃ with 0.075?x?0.4 have been established using synchrotron X-ray powder diffraction. These exhibit the sequence of structures

     

The disordered structures and low temperature dielectric relaxation properties of two misplaced-displacive cubic pyrochlores found in the Bi2O3-MO-Nb2O5 (M=Mg, Ni) systems

The disordered structures and low temperature dielectric relaxation properties of Bi_1.667Mg_0.70Nb_1.52O₇ (BMN) and Bi_1.67Ni_0.75Nb_1.50O₇ (BNN) misplaced-displacive cubic pyrochlores found in the Bi₂O₃-M^IIO-Nb₂O₅ (M=Mg, Ni) systems are reported. As for other recently reported Bi-pyrochlores, the metal ion vacancies are found to be confined to the pyrochlore A site. The B₂O₆ octahedral sub-structure is found to be fully occupied and well-ordered. Considerable displacive disorder, however, is found associated with the O′A₂ tetrahedral sub-structure in both cases. The A-site ions were displaced from Wyckoff position 16d (, , ) to 96 h (, , ) while the O′ oxygen was shifted from position 8b (, , ) to Wyckoff position 32e (, , ). The refined displacement magnitudes off the 16d and 8b sites for the A and O′ sites were 0.408 Å/0.423 Å and 0.350 Å/0.369 Å for BMN/BNN, respectively.     

Synthesis and characterization of the rare-earth dicyanamides Ln[N(CN)2]3 with Ln=La, Ce, Pr, Nd, Sm, and Eu

The rare-earth dicyanamides Ln[N(CN)₂]₃ (Ln=La, Ce, Pr, Nd, Sm, Eu) were obtained via ion exchange in aqueous medium and subsequent drying: The crystal structures were solved and refined based on X-ray powder diffraction data and they were found to be isotypic: Ln[N(CN)₂]₃; Cmcm (no. 63), Z=4, Ln=La: , , ; Ce: , , ; Pr: , , ; Nd: , , ; Sm: , , ; Eu: , , ). The compounds represent the first dicyanamides with trivalent cations. The Ln³⁺ ions are coordinated by three bridging N atoms and six terminal N atoms of the dicyanamide ions forming a three capped trigonal prism. The structure type is related to that of PuBr₃. The novel compounds Ln[N(CN)₂]₃ have been characterized by IR and Raman spectroscopy (Ln=La) and the thermal behavior has been monitored by differential scanning calorimetry (Ln=Ce, Nd, Eu).