A molecular wire modified glassy carbon electrode for achieving direct electron transfer to native glucose oxidase

Here we describe a strategy for achieving direct electron transfer to native glucose oxidase (GOx), an enzyme in which the redox active centre is buried deep within the glycoprotein. To achieve this a glassy carbon electrode is modified with a mixed monolayer of 4-carboxyphenyl and a 20 Å long oligo(phenylethynyl) molecular wire (MW), assembled from the respective aryl diazonium salts. Subsequently GOx is adsorbed to the interface, followed by covalent attachment. The redox chemistry of the active centre of glucose oxidase, flavin adenine dinucleotide, was observed at an E_1/2 of –443 mV (vs. Ag|AgCl). The enzyme was shown to retain its activity. Most importantly, in the absence of oxygen the electrode was still able to biocatalytically turn over glucose at −400 mV, thereby demonstrating that the enzyme was being recycled back to its catalytically active oxidized form from its inactive reduced form. The rate of enzyme turnover was 1.1 s⁻¹.     

A microfluidic glucose biofuel cell to generate micropower from enzymes at ambient temperature

A Y-shaped microfluidic channel is applied for the first time to the construction of a glucose/O₂ biofuel cell, based on both laminar flow and biological enzyme strategies. During operation, the fuel and oxidant streams flow parallel at gold electrode surfaces without convective mixing. At the anode, the glucose oxidation is performed by the enzyme glucose oxidase whereas at the cathode, the oxygen is reduced by the enzyme laccase, in the presence of specific redox mediators. Such cell design protects the anode from an interfering parasite reaction of O₂ at the anode and offers the advantage of using different streams of oxidant and fuel for optimal performance of the enzymes. Electrochemical characterizations of the device show the influence of the flow rate on the output potential and current density. The maximum power density delivered by the assembled biofuel cell reached 110 μW cm^?2 at 0.3 V with 10 mM glucose at 23 °C. The microfluidic approach reported here demonstrates the feasibility of advanced microfabrication techniques to build an efficient microfluidic glucose/O₂ biofuel cell device.     

Ionic liquid/mesoporous carbon/protein composite microelectrode and its biosensing application

A functional composite was prepared by mixing mesoporous carbon, glucose oxidase (GOD) and 1-butyl-3-methylimidazolium hexafluorophosphate, an ionic liquid, and characterized by SEM and RA-IR. The composite was filled in a microcavity to fabricate a paste microelectrode, demonstrating direct electrochemistry of GOD with a pair of well-defined redox peaks. The composite microelectrode was used as a glucose microsensor, showing good sensitivity over a concentration range from 10.0 to 80.0 μmol/L and a Michaelis–Menten constant of 2.42 μmol/L. This work demonstrates an efficient and accurate approach to study direct electrochemistry with potential applications in various enzymatic biosensors.     

Direct-growth of polyaniline nanowires for enzyme-immobilization and glucose detection

Amperometric enzyme biosensor based on the glucose oxidase (GOx) incorporated polyaniline nanowires (PANI-NWs) on carbon cloth (CC) electrode was demonstrated. The simple, direct-growth of PANI-NWs on CC, via electrochemical polymerization, provides free-standing, template-independent, hence almost (interfacial) defects-free nanostructures. The defect-free interfaces, along with the excellently sensitive organic nanostructured-surface, as evident from its significantly large effective surface area (24 times the geometric area) for redox-sensing, allows efficient entrapment/immobilization and sensing of biomolecules, via rapid electron-transfer at NWs-CC. The GOx-immobilized PANI-NWs/CC, even in initial unoptimized stage, exhibited an excellent sensitivity, ～2.5 mA mM^?1 cm^?2, to glucose, over detection range 0–8 mM, adequate for clinical monitoring of human glucose levels. The report clearly reveals a cost-effective simple system possessing enormous potentiality for biosensors, bioenergy and bioelectronics applications.     

Direct electrochemical conversion of bilirubin oxidase at carbon nanotube-modified glassy carbon electrodes

We report on direct electron transfer reactions of bilirubin oxidase at multi-walled carbon nanotube (MWCNT) modified glassy carbon electrodes (GCE). The bioelectrocatalytic oxygen reduction was recorded using linear sweep voltammetry (LSV) with BOD in solution, adsorbed and covalently linked to the nanotubes. The MWCNT modification of GC electrodes strongly enhances the oxygen reduction compared to the signals at unmodified GCE. Under anaerobic conditions with a high protein concentration in solution a pair of redox peaks with a formal potential of 450 ± 15 mV vs Ag/AgCl, 1 M KCl (pH 7.4) was found with cyclic voltammetry. The redox conversion is indicated to be surface-controlled and pH-dependent (54.5 mV/pH). The quasi-reversible redox reaction might be attributed to the trinuclear T2/T3 cluster of BOD.     

Design of a bioelectrocatalytic electrode interface for oxygen reduction in biofuel cells based on a specifically adapted Os-complex containing redox polymer with entrapped Trametes hirsuta laccase

The design of the coordination shell of an Os-complex and its integration within an electrodeposition polymer enables fast electron transfer between an electrode and a polymer entrapped high-potential laccase from the basidiomycete Trametes hirsuta. The redox potential of the Os^3+/2+-centre tethered to the polymer backbone (+ 720 mV vs. NHE) is perfectly matching the potential of the enzyme (+ 780 mV vs. NHE at pH 6.5). The laccase and the Os-complex modified anodic electrodeposition polymer were simultaneously precipitated on the surface of a glassy carbon electrode by means of a pH-shift to 2.5. The modified electrode was investigated with respect to biocatalytic O₂ reduction to H₂O. The proposed modified electrode has potential applications as biofuel cell cathode.     

Membrane-less and mediator-free enzymatic biofuel cell using carbon nanotube/porous silicon electrodes

Membrane-less and mediator-free direct electron transfer enzymatic biofuel cells (BFCs) with bioelectrodes comprised of single wall carbon nanotubes (SWNTs) deposited by two methods on porous silicon (pSi) substrates, are reported. In one method the SWNTs were grown by chemical vapor deposition (CVD) and then functionalized with carboxylic groups, and in the second method, pre-synthesized carboxylated SWNTs (c-SWNTs) were electrophoretically deposited on gold-coated pSi. Anodic glucose oxidase (GOx) and cathodic laccase (Lac) were immobilized on the pSi/SWNT substrates to form BFCs in pH 7 phosphate buffer solution. A peak power density of 1.38 μW/cm² (with a lifetime of 24 h) down to 0.3 μW/cm² was obtained for a BFC comprised of c-SWNT/enzyme electrodes in 4 mM glucose solution as fuel, corresponding to normal blood sugar concentration, and air as oxidant. BFCs of this relatively simple architecture have the potential for further optimization of power output and lifetime.     

Direct electrochemistry of hemoglobin and glucose oxidase in electrodeposited sol–gel silica thin films on glassy carbon

This work points out that electrogeneration of silica gel (SG) films on glassy carbon electrodes (GCEs) can be applied to immobilize biomolecules – hemoglobin (Hb) or glucose oxidase (GOD) or both of them in mixture – without preventing their activity. These proteins were physically entrapped in the sol–gel material in the course of the electro-assisted deposition process applied to form the thin films onto the electrode surface. SG films were prepared from a precursor solution by applying a suitable cathodic potential likely to induce a local pH increase at the electrode/solution interface, accelerating thereby polycondensation of the silica precursors with concomitant film formation. Successful immobilization of proteins was checked by various physico-chemical techniques. Both Hb and GOD were found to undergo direct electron transfer, as demonstrated by cyclic voltammetry. GCE–SG–Hb gave rise to well-defined peaks at potentials E_c = −0.29 V and E_a = −0.17 V in acetate buffer, corresponding to the Fe^III/Fe^II redox system of heme group of the protein, while GCE–SG–GOD was characterized by the typical signals of FAD group at E_c = −0.41 V and E_a = −0.33 V in phosphate buffer. These two redox processes were also evidenced on a single voltammogram when both Hb and GOD were present together in the same SG film. Hb entrapped in the silica thin film displayed an electrocatalytic behavior towards O₂ and H₂O₂ in solution, respectively in the mM and μM concentration ranges. Immobilized GOD kept its biocatalytic properties towards glucose. Combined use of these two proteins in mixture has proven to be promising for detection of glucose in solution via the electrochemical monitoring of oxygen consumption (decrease of the oxygen electrocatalytic signal).     

Direct electrochemistry study of glucose oxidase on Pt nanoparticle-modified aligned carbon nanotubes electrode by the assistance of chitosan–CdS and its biosensoring for glucose

Aligned carbon nanotubes (ACNTs) electrode has been developed for the direct protein electrochemistry and enzyme-biosensor study involving two types of nanoparticles. Pt nanoparticles (Pt_nano) were electro-modified on the ACNTs’ each tube, greatly increasing the electrode surface area for locating protein and also its electronic transfer ability. Glucose oxidase (GOD) with chitosan (CS) and CdS nanoparticles electrochemically coated on each tube of ACNTs–Pt_nano by the electrodeposition reaction of CS when pH value passing its pKa. The CdS nanoparticles between ACNTs electrode and GOD have stimulated the GOD’s direct electron transfer during its redox reaction of FAD/FADH₂. The CS–GOD–CdS/ACNTs–Pt_nano electrode also offer sensitive response to the substrate of glucose with detection limit of 46.8 μM (S/N = 3) and apparent Michaelis–Menten constant of 11.86 mM.     

An easy compartment-less biofuel cell construction based on the physical co-inclusion of enzyme and mediator redox within pressed graphite discs

We report on the easy and fast immobilization of glucose oxidase (GOD) and laccase by mechanical compression with graphite particles to form disc electrodes. The electrical wiring of GOD and laccase was efficiently carried out by their co-inclusion with ferrocene (Fc) and 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS) respectively. A glucose/air compartment-less biofuel cell was constructed based on the association of GOD-ferrocene-graphite disc and laccase-ABTS – graphite disc electrodes as bioanode and biocathode respectively. Such biofuel cell yielded a power density of 23 μW cm^?2 at 0.33 V as well as an open-circuit voltage and a short-circuit current of 0.63 V and 166 μA, respectively.     

Gold sputtered electrode surfaces enhance direct electron transfer reactions of human cytochrome P450s

We immobilized human cytochrome P450 (CYP), a membrane-bound enzyme, onto both smooth and nanostructured surfaces of gold electrodes via a naphthalene thiolate monolayer film. Rapid electron transfer of CYP with an electrode as a redox partner took place when the enzyme was immobilized onto an electrode surface with nanostructures. This structure was easily prepared by conventional sputtering techniques. A well-defined pair of peaks was observed at ? 0.175 V (vs. SHE) with the largest heterogeneous electron transfer rate constant of 340 s^? 1 for human CYP. The positive redox potential shift of 45 mV upon drug (testosterone) binding was clearly detected, which corresponded to a change in the spin states of heme iron in CYP. The present study showed that gold sputtered surfaces are very useful for direct electron transfer reactions of human CYP isoforms.     

Oxygen transport through laccase biocathodes for a membrane-less glucose/O2 biofuel cell

The present study reports the development of operational membrane-less glucose/O₂ biofuel cell based on oxygen contactor. Glucose oxidation was performed by glucose oxidase (GOx) co-immobilized with the mediator 8-hydroxyquinoline-5-sulfonic acid hydrate (HQS) at the anode, whereas oxygen was reduced by laccase co-immobilized with 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS²⁻) at the cathode. Both enzymes and mediators were immobilized within electropolymerized polypyrrole polymers.Nevertheless, this system is limited by the secondary reaction of O₂ electro-reduction at the anode that reduces the electron flow through the anode and thus the output voltage. In order to avoid the loss of current at the anode in glucose/O₂ biofuel cell, we developed a strategy to supply dissolved oxygen separate from the electrolyte. Porous carbon tubes were used as electrodes and modified on the external surface by the couple enzyme/mediator. The inside of the cathode tube was continuously supplied with saturated dioxygen solution diffusing from the inner to the external surface of the porous tube. The assembled biofuel cell was studied under nitrogen at 37 °C in phosphate buffer at pH 5.0 and 7.0. The maximum power density reached 27 μW cm⁻² at a cell voltage of 0.25 V at pH 5.0 with 10 mM glucose. The power density was twice as high as compared to the same system with oxygen bubbling directly in the cell.     

Dispersion of multi-wall carbon nanotubes in polyethylenimine: A new alternative for preparing electrochemical sensors

In this work we report on the analytical performance of glassy carbon electrodes modified with a dispersion of multi-wall carbon nanotubes in polyethylenimine (GCE/(PEI/CNT)). The resulting electrodes show an excellent electrocatalytic activity toward different bioanalytes like ascorbic acid, dopamine, 3,4-dihydroxyphenylacetic acid (dopac) and hydrogen peroxide. An important decrease in the overvoltages for the oxidation of ascorbic acid (505 mV) and hydrogen peroxide (350 mV) and for the reduction of hydrogen peroxide (450 mV), as well as a dramatic improvement in the reversibility of the electrochemical behavior of dopamine and dopac is obtained. The currents are higher than those obtained with other dispersant agents like Nafion, concentrated acids or chitosan, evidencing the high efficiency of the dispersion in PEI. The GCE/(PEI/CNT) demonstrated to be highly reproducible, with 3.0% RSD for the sensitivity of hydrogen peroxide for 10 electrodes prepared with five different dispersions. Differences in sensitivity of 10.0% were obtained for hydrogen peroxide with electrodes prepared using the same dispersion even after 14 days preparation. The CNT/PEI layer immobilized on glassy carbon electrodes has been also used as a platform for building supramolecular architectures based on the self-assembling of polyelectrolytes without any pretreatment of the electrode surface, oxidation or derivatization of the carbon nanotubes, just taking advantages of the polycationic nature of the polymer used for dispersing the nanotubes. The self-assembling of glucose oxidase has allowed us to obtain a supramolecular multistructure for glucose biosensing, with detection limits of 11 μM (0.02 g/L). Such an excellent performance of GCE/(PEI/CNT) toward hydrogen peroxide and the effectiveness of the use of CNT/PEI as a platform for obtaining supramolecular multistructures, represents a very good alternative for developing other enzymatic biosensors.     

Enhancement of the performances of a single concentric glucose/O2 biofuel cell by combination of bilirubin oxidase/Nafion cathode and Au–Pt anode

This work deals with a novel preparation method of bilirubin oxidase/2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid electrode. The enzyme and its mediator were adsorbed on carbon Vulcan XC-72R before their immobilization into a Nafion^® matrix. Promising results were obtained when this biocathode was associated with Au₇₀Pt₃₀ nanoparticles as anode in a single concentric glucose/O₂ biofuel cell (BFC). The latter BFC delivered at 37 °C a power density of 90 μW cm^?2 for a cell voltage of 0.4 V in phosphate buffer (pH 7.4) containing 0.01 M glucose. Moreover, the electrical performances were increased with the concentration of glucose by generating up to 190 μW cm^?2 for a cell voltage of 0.52 V when the concentration of the renewable fuel reached 0.7 M.     

Iron (III) nanocomposites for enzyme-less biomimetic cathode: A promising material for use in biofuel cells

In this paper, we discuss the synthesis and electrochemical properties of a new material based on iron oxide nanoparticles stabilized with poly(diallyldimethylammonium chloride) (PDAC); this material can be used as a biomimetic cathode material for the reduction of H₂O₂ in biofuel cells. A metastable phase of iron oxide and iron hydroxide nanoparticles (PDAC–FeOOH/Fe₂O₃-NPs) was synthesized through a single procedure. On the basis of the Stokes–Einstein equation, colloidal particles (diameter: 20 nm) diffused at a considerably slow rate (D = 0.9 × 10^? 11 m s^? 1) as compared to conventional molecular redox systems. The quasi-reversible electrochemical process was attributed to the oxidation and reduction of Fe³⁺/Fe²⁺ from PDAC–FeOOH/Fe₂O₃-NPs; in a manner similar to redox enzymes, it acted as a pseudo-prosthetic group. Further, PDAC–FeOOH/Fe₂O₃-NPs was observed to have high electrocatalytic activity for H₂O₂ reduction along with a significant overpotential shift, ΔE = 0.68 V from ? 0.29 to 0.39 V, in the presence and absence of PDAC–FeOOH/Fe₂O₃-NPs. The abovementioned iron oxide nanoparticles are very promising as candidates for further research on biomimetic biofuel cells, suggesting two applications: the preparation of modified electrodes for direct use as cathodes and use as a supporting electrolyte together with H₂O₂.     

Design of an Os Complex‐Modified Hydrogel with Optimized Redox Potential for Biosensors and Biofuel Cells

Multistep synthesis and electrochemical characterization of an Os complex‐modified redox hydrogel exhibiting a redox potential ≈+30 mV (vs. Ag/AgCl 3 m KCl) is demonstrated. The careful selection of bipyridine‐based ligands bearing N,N‐dimethylamino moieties and an amino‐linker for the covalent attachment to the polymer backbone ensures the formation of a stable redox polymer with an envisaged redox potential close to 0 V. Most importantly, the formation of an octahedral N6‐coordination sphere around the Os central atoms provides improved stability concomitantly with the low formal potential, a low reorganization energy during the Os^3+/2+ redox conversion and a negligible impact on oxygen reduction. By wiring a variety of enzymes such as pyrroloquinoline quinone (PQQ)‐dependent glucose dehydrogenase, flavin adenine dinucleotide (FAD)‐dependent glucose dehydrogenase and the FAD‐dependent dehydrogenase domain of cellobiose dehydrogenase, low‐potential glucose biosensors could be obtained with negligible co‐oxidation of common interfering compounds such as uric acid or ascorbic acid. In combination with a bilirubin oxidase‐based biocathode, enzymatic biofuel cells with open‐circuit voltages of up to 0.54 V were obtained.     

Mediated electron transfer with P450cin

P450cin stereoselectively hydroxylated its natural substrate 1,8-cineole to 2β-hydroxy-1,8-cineole in an electrochemical cell which allowed for substitution of the natural cofactor NADPH by artificial redox mediators. Cobalt sepulchrate, phenosafranine, safranine T, FAD and FMN enabled artificial electron transfer from the platinum electrode to P450cin via the redox partner protein cindoxin. The highest product formation, 6.50 ± 0.60 nmol (product) nmol (P450)^?1 min^?1 cm^?2, was achieved using cobalt sepulchrate. Surprisingly, phenosafranine and safranine T enabled electron transfer even in the absence of NADPH, cindoxin, and cindoxin reductase, thereby illustrating that none of the natural redox partners is needed for product formation.     

An enzymatic glucose/O2 biofuel cell: Preparation,characterization and performance in serum

This study demonstrates a new kind of single-walled carbon nanotubes (SWNT)-based compartment-less glucose/O₂ biofuel cell (BFC) with glucose dehydrogenase (GDH) and bilirubin oxidase (BOD) as the anodic and cathodic biocatalysts, respectively, and with poly(brilliant creysl blue) (BCB) adsorbed onto SWNT nanocomposite as the electrocatalyst for the oxidation of NADH. The prepared GDH-polyBCB-SWNT bioanode exhibits an excellent electrocatalytic activity toward the oxidation of glucose biofuel; in 0.10 M phosphate buffer containing 20 mM NAD⁺ and 100 mM glucose, the oxidation of glucose commences at −0.25 V and the current reaches its maximum of 310 μA/cm² at −0.05 V vs. Ag/AgCl. At the BOD-SWNT biocathode, a high potential output is achieved for the reduction of O₂ due to the direct electron transfer property of BOD at the SWNTs. In 0.10 M phosphate buffer, the electrocatalytic reduction of O₂ is observed at a high potential of 0.53 V vs. Ag/AgCl with an electrocatalytic current plateau of ca. 28 μA/cm² at 0.45 V under ambient air and ca. 102 μA/cm² under O₂-saturated atmosphere. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 40 mM glucose under O₂-saturated atmosphere, the power density of the assembled SWNT-based glucose/O₂ BFC reaches 53.9 μW/cm² at 0.50 V. The performance and the stability of the glucose/O₂ BFC are also evaluated in serum. This study could offer a new route to the development of new kinds of enzymatic BFCs with a high performance and provide useful information on future studies on the enzymatic BFCs as in vivo power sources.     

A glucose/O2 biofuel cell base on nanographene platelet-modified electrodes

This study demonstrated a novel nanographene platelets (NGPs)-based glucose/O₂ biofuel cell (BFC) with the glucose oxidase (GOD) as the anodic biocatalysts and the laccase as the cathodic biocatalysts. The GOD/NGPs-modified electrode exhibited good catalytic activity towards glucose oxidation and the laccase/NGPs-modified electrode exhibited good catalytic activity towards O₂ electroreduction. The maximum power density was ca. 57.8 μW cm^? 2 for the assembled glucose/O₂ NGPs-based BFC. These results indicated that the NGPs were very useful for the future development of novel carbon-based nanomaterials BFC device.     

Direct electrochemistry of glucose oxidase on a graphite nanosheet–Nafion composite film modified electrode

The direct electrochemistry of glucose oxidase (GOD) immobilized in a modified electrode based on a composite film of exfoliated graphite nanosheets (GNSs) and Nafion has been investigated for the first time. Direct electron communication between GOD and the electrode was achieved with a fast electron transfer rate (12.6 s^?1). In addition, the bioactivity of GOD was retained after immobilization in the composite film and glucose could be determined based on the decrease of the electrocatalytic response of the reduced form of GOD to dissolved oxygen. The resulting biosensor exhibited higher sensitivity (3.4 μA mM^?1). Considering much lower cost of GNSs and ready preparation from graphite, the GNSs-based modified electrode described here is superior to the carbon nanotubes (CNTs)-based modified electrodes and should have wide applications in third-generation biosensors, bioelectronics and electrocatalysis.