Determination of WR-1065 and WR-33278 by liquid chromatography with electrochemical detection

A liquid chromatographic method using electrochemical detection is presented for measuring the thiol WR-1065 12-(3-aminopropylamino) ethanethiol] and its symmetrical disulfide WR-33278 [NH2(CH2)3NHCH2CH2S]2. WR- 1065 is the active, radioprotective drug derived from the phosphorothioate pro-drug WR-2721 (amifostine). External standard curves for both compounds were linear over the range of 40-200 pmol injected (r2 = 0.999 and 0.996 for the thiol and disulfide, respectively). The detection and quantitation limits for WR-1065 were 9 and 18 pmol, respectively, whereas the corresponding values for WR-33278 were 30 and 59 pmol, respectively. Within- and between-day determinations of measurement Vision and accuracy for both compounds validated the suitability of this assay method.     

Surface characterization and platelet compatibility evaluation of the binary mixed self-assembled monolayers

This report describes a technique that used mixed self-assembled monolayer (SAM) as a model surface to evaluate the effect of steric hindrance on the SAM packing quality and its platelet compatibility. Two series of binary mixed SAMs were formed by mixing the bulky terminated alkanethiol (HS(CH2)10PO3H2) with a smaller terminated one (HS(CH2)9CH3 and HS(CH2)11OH) respectively. Surface characterization results showed the hydrophilicity on these two series of mixed SAMs changed with the solution mole fraction of PO3H2 terminated thiol, chi(PO3H2,soln), and reached to a nearly constant value as chi(PO3H2,soln) was 0.6 for PO3H2+CH3 SAM and 0.4 for PO3H2+OH SAM. This finding should be due to the gradual saturation of surface PO3H2 functionality on these mixed SAMs. The XPS analysis indicated the addition of the CH3 and OH terminated thiol could reduce the steric hindrance effect of PO3H2 functionality on monolayer formation and, henceforth, improve the SAM packing quality. In vitro platelet adhesion assay revealed the platelet compatibility on the PO3H2+OH SAMs was better than that on the PO3H2+CH3 and the pure PO3H2 ones. Moreover, the PO3H2+OH SAM with a low chi(PO3H2,soln) value exhibited the least platelet activating property of these two mixed SAM systems. These findings suggested that material's surface wettability and surface charge density should act collectively in affecting its platelet compatibility.     

Molecular QCA cells. 2. Characterization of an unsymmetrical dinuclear mixed-valence complex bound to a Au surface by an organic linker

Utilization of binary information encoded in the charge configuration of quantum-dot cells (the quantum-dot cellular automata, QCA, paradigm) requires surface-bound molecule-sized dots for room temperature operation. Molecular QCA cells are mixed-valence complexes, and the evaluation of a surface-bound unsymmetrical, heterobinuclear, two-dot, Fe-Ru molecular QCA cell is described. The tailed complex, trans-[Ru(dppm)(2)(C[triple bond]CFc)(N[triple bond]CCH(2)CH(2)-NH(2))][PF(6)] (dppm = methylbis(diphenylphosphane), Fc = (eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))), is covalently modified with the molecular adapter, HS(CH(2))(10)COOH, for binding to a Au surface. Preparation and characterization of the films by AFM, XPS, and electrochemical techniques are reported. Cyclic voltammetric techniques are used to assess film growth, coverage and uniformity, effects of thiol diluents on areal densities of the complex, and stabilities of the accessible redox states. Amperometric techniques are used to investigate the efficiency of both chemical and electrochemical oxidation in producing the mixed-valence dication on the surface.     

A Method for the Measurement of total Drug Convertible to Cysteamine: Application to Pharmacokinetic Experiments with Ethiofos

Abstract

An analytical method has been developed for the quantification of cysteamine (2-aminoethanethiol) in plasma. A reductive sample pretreatment is used to convert disulfide-bound cysteamine to the free thiol which is subsequently separated by HPLC and detected by electrochemical detection (LCEC). The method was developed to follow drug disposition after administration of ethiofos (WR-2721, S-2-(3-aminopropylamino) ethyl phosphorothioic acid) and WR-1065 (2-(3-aminopropylamino)ethanethiol). Standard calibration curves were linear over the range 0.01- to 25.0 /μg/mL (0.130-324 μM) and a minimum detectable quantity of 0.01 μg/mL was calculated at a signal-to-noise ratio of 3. Assay precision over the same range averaged 2% (coefficient of variation) and relative recovery, used as a measure of accuracy, was 100Z. Stability of cysteamine in plasma, relative to an internal standard (2-aminopropanethiol, WR-186) was good; stored samples were found to contain an average of 94.6 ± 10.4z of the original cysteamine concentration following 28 days at -75 °C.

This method was successfully applied in dosing experiments with rhesus monkeys in which ethiofos was administered into the cephalic vein (IV), portal vein (P) and duodenum. In IV experiments total VR-1065 plasma concentrations greatly exceeded total cysteamine concentrations. While results indicate formation of free and bound cysteamine is not a major metabolic pathway of ments total VR-1065 plasma concentrations greatly exceeded total cysteamine concentrations. While results indicate formation of free and bound cysteamine is not a major metabolic pathway of ethiofos, increased levels of bound cysteamine were observed.     

Sequence dependence of DNA radioprotection by the thiols WR-1065 and WR-151326

Sequence-dependent variations of DNA structure modulate radiation-induced strand breakage. Thiols reduce breakage by scavenging damaging radiolytic OH ^. and repairing sugar radicals. As shown by sequencing gel electrophoresis, WR-1065 radioprotection is modulated by sequence, whereas that of WR-151326, a larger thiol, is more evenly distributed. Molecular modelling was performed on complexes of a 53 bp oligonucleotide (belonging to a natural restriction fragment) with one molecule of WR-1065 or WR-151326. Energy minimised structures exhibit a broadening of the minor groove of an AAATT motif upon WR-1065 binding, and a narrowing of the groove upon WR-151326 binding. Consequently, the accessibility to OH^˙ of H4′ (whose abstraction leads to strand breakage) increases near WR-1065, whereas it decreases near WR-151326. This modifies locally the otherwise homogeneous radioprotection. The effect of WR-151326 strengthens the protection at all tested binding sites, whereas that of WR-1065 diminishes it in some regions, in good agreement with the observed radioprotection distribution. Received: 24 April 1998 / Accepted: 4 August 1998 / Published online: 11 November 1998     

Interaction of amphetamine and its N-alkyl-substituted derivatives with micro- and mesoporous adsorbents in polar liquids

The process of concentrating amphetamine (1-phenyl-2-propanamine, C6H5CH2CH(NH2)CH3) and its N-alkyl substituted derivatives C6H5CH2CH(NHR)CH3 and C6H5CH2CH(N(CH3)R)CH3 (R=(CH2)(n)CH3 at n=0, 1, 2, and 3) from diluted aqueous solution was investigated using six adsorbents having different textures and chemical compositions. Three chemically modified carbon adsorbents prepared from plum stones and routinely used SPE cartridges packed with graphitized adsorbents such as Hypercarb and Envicarb and polymeric LiChrolut EN were applied. Recovery rates of amphetamines increase nearly linearly with growing free energy of solvation due to better adsorption of amphetamines with larger side groups from polar solution. Reduction of a carbon surface leads to a decrease in the recovery rate. Its minimal values are observed for the adsorption of amphetamines on graphitized carbons due to both lower adsorption and worse desorption (elution) in comparison with those for activated carbons.     

Design of heterogeneous catalysts via multiple active site positioning in organic-inorganic hybrid materials

Catalytic materials bearing multiple sulfonic acid functional groups and positioned at varying distances from one another on the surface of mesoporous solids are prepared to explore the effects that the spatial arrangement of active sites have on catalytic activity and selectivity. A series of organosiloxane precursors containing either disulfide or sulfonate ester functionalities (synthons of the eventual sulfonic acid groups) are synthesized. From these molecular precursors, a variety of organic-inorganic hybrid, mesostructured SBA-15 silica materials are prepared using a postsynthetic grafting procedure that leads to disulfide and sulfonate ester modified silicas: [Si]CH(2)CH(2)CH(2)SS-pyridyl, 2.SBA, [Si]CH(2)CH(2)CH(2)SSCH(2)CH(2)CH(2)[Si], 3.SBA, [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OCH(2)CH(3), 4.SBA, and [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OC(6)H(4)O(SO(2))(C(6)H(4))CH(2)CH(2)[Si], 6.SBA ([Si] = (tbd1;SiO)(x)()(RO)(3)(-)(x)()Si, where x = 1, 2). By subsequent chemical derivatization of the grafted species, thiol and sulfonic acid modified silicas are obtained. The materials are characterized by a variety of spectroscopic ((13)C and (29)Si CP MAS NMR, X-ray diffraction) and quantitative (TGA/DTA, elemental analysis, acid capacity titration) techniques. In all cases, the organic fragment of the precursor molecule is grafted onto the solid without measurable decomposition, and the precursors are, in general, attached to the surface of the mesoporous oxide by multiple siloxane bridges. The disulfide species 2.SBA and 3.SBA are reduced to the corresponding thiols 7.SBA and 8.SBA, respectively, and 4.SBA and 6.SBA are transformed to the aryl sulfonic acids 11.SBA and 12.SBA, respectively. 7.SBA and 8.SBA differ only in terms of the level of control of the spatial arrangement of the thiol groups. Both 7.SBA and 8.SBA are further modified by oxidation with hydrogen peroxide to produce the alkyl sulfonic acid modified materials 9.SBA and 10.SBA, respectively. The performances of the sulfonic acid containing SBA-15 silica materials (with the exception of 12.SBA) are tested as catalysts for the condensation reaction of phenol and acetone to bisphenol A. The alkyl sulfonic acid modified material 10.SBA derived from the cleavage and oxidation of the dipropyl disulfide modified material 3.SBA is more active than not only its monosite analogue 9.SBA, but also the presumably stronger acid aryl sulfonic acid material 11.SBA. It appears that a cooperative effect between two proximal functional groups may be operating in this reaction.     

Synthesis and characterization of a novel functionalized azanonaborane cluster for boron neutron capture therapy

The reactivity of an azanonaborane cluster containing free amino groups {H2N(CH2)4H2NB8H11NH(CH2)4NH2} towards ketones and aldehydes is investigated. In a one step reaction, the reductive amination of some ketones and aldehydes (namely acetone, benzaldehyde, 3-hydroxybenzaldehyde, 4-hydroxybenzaldehyde, 4-nitrobenzaldehyde, 4-acetoxybenzaldehyde, and 4-acetamidobenzaldehyde) with an azanonaborane cluster in the presence of H3BNH2(CH2)4NH2 gives monoalkylamino derivatives of the azanonaborane cluster {RHN(CH2)4H2NB8H11NH(CH2)4NHR} where (R =(Me)2CH-, C6H5CH2-, 3-OHC6H4CH2-, 4-OHC6H4CH2-, 4-NO2C6H4CH2-, 4-MeOCOC6H4CH2-, or 4-NH2COC6H4CH2-). The functionalized derivatives of the {B8N} cluster can be used in boron neutron capture therapy for tumors (BNCT). Similarly, the reductive amination of 5-(4"-formylphenyl)-10,15,20-triphenylporphyrin with the {B8N} cluster gave a porphyrin bearing azanonaborane cluster, while a porphyrin dimer linked by an azanonaborane moiety was obtained following the same method, starting with a 2:1 molar ratio of porphyrin:{B8N} cluster. 5,10,15,20-Tetraformylphenylporphyrin gave the chance to increase the percentage of boron in the resulting boronated porphyrin, which is considered an important factor for a BNCT delivery agent. With these compounds, the cell toxicity using V79 cells was carried out to determine whether these compounds would have favorable biological properties.     

Synthesis and structure of cyclic phosphate, phosphoramidate, phosphonates, and phosphonium salts. Phosphatrane formation

Reaction of tris(2-hydroxy-3,5-dimethylbenzyl)amine (6) with phosphorus reagents led to the formation of the phosphoramidate, N[CH2(Me2C6H2)O]2PO (1), the phosphate N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)(OPh) (2), the phosphonium salts N[CH2(Me2C6H2)O]3PMe+I- (3A) and N[CH2(Me2C6H2)O]3PMe+I3- (3B), and the phosphonates N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)Me (4) and N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OSiMe3]P(O)Me (5). X-ray analysis provided molecular structures for all of the compounds. The solid-state structural representations were supported in solution by an analysis of the NCH2 proton NMR patterns. The structures of 3A and 3B show the presence of phosphatranes with weak P-N donor interactions. These represent the first phosphatranes containing all six-membered rings. Variable temperature analysis of the 1H NMR spectra of 3A indicates fluxional behavior whereby a racemic mixture of the chiral phosphonium salt rapidly intraconverts at room temperature. The activation energy for the enantiomeric conversion of the clockwise and anticlockwise orientations of the propeller-like phosphatrane is 11.2 kcal/mol, which is compared to that of the isoelectronic silatrane N[CH2(Me2C6H2)O]3SiMe (E), 10.3 kcal/mol.     

Reaction chemistry and ligand exchange at cadmium-selenide nanocrystal surfaces

The surface chemistry of cadmium selenide nanocrystals, prepared from tri-n-octylphosphine selenide and cadmium octadecylphosphonate in tri-n-octylphosphine oxide, was studied with 1H and {1H}31P NMR spectroscopy as well as ESI-MS and XPS. The identity of the surface ligands was inferred from reaction of nanocrystals with Me3Si-X (X = -S-SiMe3, -Se-SiMe3, -Cl and -S-(CH2CH2O)4OCH3)) and unambiguous assignment of the organic byproducts, O,O'-bis(trimethylsilyl)octadecylphosphonic acid ester and O,O'-bis(trimethylsilyl)ocatdecylphosphonic acid anhydride ester. Nanocrystals isolated from these reactions have undergone exchange of the octadecylphosphonate ligands for -X as was shown by 1H NMR (X = -S-(CH2CH2O)4OCH3) and XPS (X = -Cl). Addition of free thiols to as prepared nanocrystals results in binding of the thiol to the particle surface and quenching of the nanocrystal fluorescence. Isolation of the thiol-ligated nanocrystals shows this chemisorption proceeds without displacement of the octadecylphosphonate ligands, suggesting the presence of unoccupied Lewis-acidic sites on the particle surface. In the presence of added triethylamine, however, the octadecylphosphonate ligands are readily displaced from the particle surface as was shown with 1H and {1H}31P NMR. These results, in conjunction with previous literature reports, indicate that as-prepared nanocrystal surfaces are terminated by X-type binding of octadecylphosphonate moieties to a layer of excess cadmium ions.     

Stability of carboplatin and oxaliplatin in their infusion solutions is due to self-association

Carboplatin and oxaliplatin are commonly used platinum anticancer agents that are sold as ready-to-use aqueous infusion solutions with shelf lives of 2 and 3 years, respectively. The observed rate constants for the hydrolysis of these drugs, however, are too large to account for their long shelf lives. We here use electrospray-trap mass spectrometry to show that carboplatin and oxaliplatin are self-associated at concentrations in their ready-to-use infusion solutions (~27 mM and 13 mM, respectively) and, as expected, when the drug concentration is reduced to more physiologically relevant concentrations (100 μM and 5 μM, respectively) the association equilibrium is shifted in favor of the monomeric forms of these drugs. Using (1)H NMR we measure the intensity of the NH resonance of the two symmetry-equivalent NH(3) molecules of carboplatin, relative to the intensity of the γ-methylene CH resonance, as a function of total drug concentration. Then, by fitting the data to models of different molecularity, we show that the association complex is a dimer with a monomer-dimer association constant of K (M(-1)) = 391 ± 127. The work presented here shows that carboplatin and oxaliplatin mainly exist as association complexes in concentrated aqueous solution, a property that accounts for the long term stability of their ready-to-use infusion solutions, and that these association complexes may exist, to some extent, in the blood after injection.     

Reaction of thiols with N-bonded sulfenamide complexes of cobalt(III): steric effect and reaction pathway

The products and kinetics of the reaction of several thiols (RSH = 2-aminoethanethiol, cysteine, penicillamine, cysteine ethyl ester) with N-bonded sulfenamide complexes ([Co(en)(2)(NH(2)S(CH(2))(2)NH(2)](3+) (IA), [Co(en)(2)(NH(2)SCH(2)CH(CO(2)H)NH(2)](3+) (IC), [Co(en)(2)(NH(2)SC(CH(3))(2)CH(CO(2)H)NH(2)](3+) (IP)) have been studied. The reaction proceeds by nucleophilic attack at sulfur with cleavage of the N-S bond to form a disulfide and leave a coordinated NH(3) ligand. The kinetics (pH 4-10) reveal that the deprotonated thiol, RS(-), is the reactive nucleophile and that the N-deprotonated sulfenamide complex is unreactive. The reactions of IP are approximately 10(4) times slower than those of IA or IC, and the reasons and consequences of this large steric effect are discussed. It is concluded, on the basis of these and other observations from the literature, that there will be substantial steric retardation to nucleophilic attack at two-coordinate sulfur in a R-C(CH(3))(2)-S-X-R' unit because of the regiospecificity of the reaction. The acid dissociation constants of IP and the X-ray structure of its bromide salt also are reported.     

Theoretical study on the reactivities of stannylene and plumbylene and the origin of their activation barriers

The potential energy surfaces corresponding to the reactions of heavy carbenes with various molecules were investigated by employing computations at the B3LYP and CCSD(T) levels of theory. To understand the origin of barrier heights and reactivities, the model system (CH3)2X+Y (X=C, Si, Ge, Sn, and Pb; Y=CH4, SiH4, GeH4, CH3OH, C2H6, C2H4, and C2H2) was chosen for the present study. All reactions involve initial formation of a precursor complex, followed by a high-energy transition state, and then a final product. My theoretical investigations suggest that the heavier the X center, the larger the activation barrier, and the less exothermic (or the more endothermic) the chemical reaction. In particular, the computational results show that (CH3)2Sn does not insert readily into C-H, Si-H, C-H, Ge-H, or C-C bonds. It is also unreactive towards C=C bonds, but is reactive towards C identical with C and O-H bonds. My theoretical findings are in good agreement with experimental observations. Furthermore, a configuration mixing model based on the work of Pross and Shaik is used to rationalize the computational results. It is demonstrated that the singlet-triplet splitting of a heavy carbene (CH3)2X plays a decisive role in determining its chemical reactivity. The results obtained allow a number of predictions to be made.     

Synthesis and characterization of mixed-ligand oxorhenium complexes with the SNN type of ligand. Isolation of a novel ReO[SN][S][S] complex

A new series of mixed-ligand oxorhenium complexes 4-9, with ligands 1-3 (L1H2) containing the SNN donor set and monodentate thiols as coligands (L2H), is reported. All complexes were synthesized using ReOCl3(PPh3)2 as precursor. They were isolated as crystalline products and characterized by elemental analysis and IR and NMR spectroscopy. The ligands 1 and 2 (general formula RCH2CH2NHCH2CH2SH, where R = N(C2H5)2 in 1 and pyrrolidin-1-yl in 2) act as tridentate SNN chelates to the ReO3+ core, leaving one open coordination site cis to the oxo group. The fourth coordination site is occupied by a monodentate aromatic thiol which acts as a coligand. Thus, three new "3 + 1" [SNN][S] oxorhenium complexes 4-6 (general formula ReO[RCH2CH2NCH2CH2S][SX], where R = N(C2H5)2 and X = phenyl in 4, R = N(C2H5)2 and X = p-methylphenyl in 5, and R = pyrrolidinlyl and X = p-methylphenyl in 6) were prepared in high yield. Complex 4 adopts an almost perfect square pyramidal geometry (tau = 0.07), while 6 forms a distorted square pyramidal geometry (tau = 0.24). In both complexes 4 and 6, the basal plane is formed by the SNN donor set of the tridentate ligand and the S of the monodentate thiol. On the other hand, the ligand 3, [(CH3)2CH]2NCH2CH2NHCH2CH2SH, acts as a bidentate ligand, probably due to steric hindrance, and it coordinates to the ReO3+ core through the SN atoms, leaving two open coordination sites cis to the oxo group. These two vacant positions are occupied by two molecules of the monodentate thiol coligand, producing a novel type of "2 + 1 + 1" [SN][S][S] oxorhenium mixed-ligand complexes 7-9 (general formula ReO[[(CH3)2CH]2NCH2CH2NHCH2CH2S][SX][SX], where X = phenyl in 7, p-methylphenyl in 8, and benzyl in 9). The coordination sphere about rhenium in 7 and 8 consists of the SN donor set of ligand 3, two sulfurs of the two monodentate thiols, and the doubly bonded oxygen atom in a trigonally distorted square pyramidal geometry (tau = 0.44 and 0.45 for 7 and 8, respectively). Detailed NMR assignments were determined for complexes 5 and 8.     

Folding control and unfolding free energy of yeast iso-1-cytochrome c bound to layered zirconium phosphate materials monitored by surface plasmon resonance

The free energy change (Delta G degrees ) for the unfolding of immobilized yeast iso-1-cytochrome c (Cyt c) at nanoassemblies was measured by surface plasmon resonance (SPR) spectroscopy. Data show that SPR is sensitive to protein conformational changes, and protein solid interface exerts a major influence on bound protein stability. First, Cyt c was self-assembled on the Au film via the single thiol of Cys-102. Then, crystalline sheets of layered alpha-Zr(O(3)POH)(2).H(2)O (alpha-ZrP) or Zr(O(3)PCH(2)CH(2)COOH)(2).xH(2)O (alpha-ZrCEP) were adsorbed to construct alpha-ZrP/Cyt c/Au or alpha-ZrCEP/Cyt c/Au nanoassemblies. The construction of each layer was monitored by SPR, in real time, and the assemblies were further characterized by atomic force microscopy and electrochemical studies. Thermodynamic stability of the protein nanoassembly was assessed by urea-induced unfolding. Surprisingly, unfolding is reversible in all cases studied here. Stability of Cyt c in alpha-ZrP/Cyt c/Au increased by approximately 4.3 kJ/mol when compared to the unfolding free energy of Cyt c/Au assembly. In contrast, the protein stability decreased by approximately 1.5 kJ/mol for alpha-ZrCEP/Cyt c/Au layer. Thus, OH-decorated surfaces stabilized the protein whereas COOH-decorated surfaces destabilized it. These data quantitate the role of specific functional groups of the inorganic layers in controlling bound protein stability.     

N-heterocyclic phosphenium cations: syntheses and cycloaddition reactions

A series of trifluoromethanesulfonate (OTf) salts of N-heterocyclic phospheniums (NHP) bearing phenyl (1a), para-methoxyphenyl (1b), 2,6-diisopropylphenyl (1c) and mesityl (1d) substituents is reported. The compounds are made by a modification to a literature procedure that improves the overall yields for and by 15 and 23%, respectively. Two unwanted side-products in the synthesis of , the diammonium salt, [(2,6-iPr-C6H3)N(H)2CH2CH2N(H)2(2,6-iPr-C6H3)]Cl2 (4) and the bisphosphine (2,6-iPr-C6H3)N(PCl2)CH2CH2N(PCl2)(2,6-iPr-C6H3) (5), are crystallographically characterized, as is the intermediate cyclic chlorophosphine, C1PN(4-OMe-C6H4)CH2CH2N(4-OMe-C6H4) (3b). The phenyl-substituted NHP is fully characterized, including by X-ray crystallography, for the first time; this compound contains a short P-O contact of 2.1850(14) A. Cycloaddition reactions of with 2,3-dimethyl-1,3-butadiene give the expected spirocyclic phospholeniums, 7,8-dimethyl-1,4-diaryl-1,4-diaza-5-phopshoniaspiro[4.4]non-7-ene, as their OTf salts (6a-d), while reactions with N,N'-dimesityl-1,4-diaza-1,3-butadiene give, except in the case of , which is too bulky to react, the aza analogues, 1,4-dimesityl-6,9-diaryl-1,4,6,9-tetraaza-5-phosphoniaspiro[4.4]non-2-ene (7a, 7b and 7d). The sterically congested is in thermal equilibrium with and free diazadiene, and undergoes a substitution reaction with 2,3-dimethyl-1,3-butadiene to give .     

Synthesis and Structural Characterization of Pd[CH3O（O）C6H3CHNNC（S）NH2]（C5H5N）

1 INTRODUCTION Palladium (Ⅱ) coordination and organometallic compounds usually show square planar environments at the metal center[1], and have experienced an im- portant development in the past years due to their acting as intermediates in different types of catalytic reactions and numerous applications in organic synthesis[2]. Although palladium plays an increase- ingly recognized role as a biometal[3], little is known about the structure and function of palladium compounds in living …     

Water-soluble carbosilane dendrimers: synthesis biocompatibility and complexation with oligonucleotides; evaluation for medical applications

Novel amine- or ammonium-terminated carbosilane dendrimers of type nG-[Si{OCH2(C6H3)-3,5-(OCH2CH2NMe2)2}]x, nG-[Si{O(CH2)2N(Me)(CH2)2NMe2}]x and nG-[Si{(CH2)3NH2}]x or nG-[Si{OCH2(C6H3)-3,5-(OCH2CH2NMe3 +I-)2}]x, nG-[Si{O(CH2)2N(Me)(CH2)2NMe3 +I-}]x, and nG-[Si{(CH2)3NH3 +Cl-}]x have been synthesized and characterized up to the third generation by two strategies: 1) alcoholysis of Si--Cl bonds with amino alcohols and subsequent quaternization with MeI, and 2) hydrosilylation of allylamine with Si--H bonds of the dendritic systems and subsequent quaternization with HCl. Quaternized carbosilane dendrimers are soluble in water, although degradation is apparent due to hydrolysis of Si--O bonds. However, dendrimers containing Si--C bonds are water-stable. The biocompatibility of the second-generation dendrimers in primary cell cultures of peripheral blood mononuclear cells (PBMCs) and erythrocytes have been analyzed, and they show good toxicity profiles over extended periods. In addition, we describe a study on the interactions between the different carbosilane dendrimers and DNA oligodeoxynucleotides (ODNs) and plasmids along with a comparative analysis of their toxicity. They can form complexes with DNA ODNs and plasmids at biocompatible doses via electrostatic interaction. Also a preliminary transfection assay has been accomplished. These results demonstrate that the new ammonium-terminated carbosilane dendrimers are good base molecules to be considered for biomedical applications.     

铑催化合成气转化为乙醇反应中甲酰基中间体的化学捕获

本文采用化学捕获法对铑基催化剂上合成气转化反应中的甲酰基中间体进行了化学捕获,在CO+2D_2反应后,用CH_3I进行的化学捕获反应中生成了CH_3CHO、CH_3CDO两种形式的乙醛;补充的Ar吹扫实验显示DCO的甲基化反应对生成的CH_3CDO有重要贡献。因此,甲酰基的确是合成气反应中的C_1含氧中间体。根据这一结果,初步探讨了合成气反应中CH_x物种的生成途径。     

Methane oxidation at redox stable fuel cell electrode La0.75Sr0.25Cr0.5Mn0.5O(3-delta)

Because of its widespread availability, natural gas is the most important fuel for early application of stationary fuel cells, and furthermore, methane containing biogases are one of the most promising renewable energy alternatives; thus, it is very important to be able to efficiently utilize methane in fuel cells. Typically, external steam reforming is applied to allow methane utilization in high temperature fuel cells; however, direct oxidation will provide a much better solution. Recently, we reported good electrochemical performance for an oxide anode La0.75Sr0.25Cr0.5Mn0.5O3 (LSCM) in low moisture (3% H2O) H2 and CH4 fuels without significant coking in CH4. Here, we investigate the catalytic activity of this oxide with respect to its ability to utilize methane. This oxide is found to exhibit fairly low reforming activity for both H2O and CO2 reforming but is active for methane oxidation. LSCM is found to be a full oxidation catalyst rather than a partial oxidation catalyst as CO2 production dominates CO production even in CH4-rich CH4/O2 mixtures. X-ray adsorption spectroscopy was utilized to confirm that Mn was the redox active species, clearly demonstrating that this material has the oxidation catalytic behavior that might be expected from a Mn perovskite and that the Cr ion is only present to ensure stability under fuel atmospheres.