Positron lifetime spectroscopy in ordered nanoporous polymers

Positron annihilation lifetime spectroscopy (PALS) is a common technique used to characterize the porosity of polymers. Here, we expand its use to the study of ordered nanoporous polymer monoliths. Polystyrene (PS) monoliths with aligned cylindrical pores ranging in diameters from 15 to 35 nm were examined. Such large pores push the boundaries of the PALS technique. To achieve robust measurement, our system used larger detectors than those typically used for monolithic polymer samples. This was done to improve data rates while sacrificing timing resolution. Pore sizes determined using PALS were consistent with measurements made using small angle x‐ray scattering. In addition, PALS was able to detect the collapse of the pores when the monolithic sample was heated above the T_g of PS. Because PALS measurements are not sensitive to the nature of the order within the structure nor are they, sensitive to the open or closed nature of the pores this technique could be expanded to a variety of other sample types. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1157–1161     

Effect of water on glass transition in starch/sucrose matrices investigated through positron annihilation lifetime spectroscopy: a new approach

Glass transition is studied through positron annihilation lifetime spectroscopy (PALS) in maize starch matrices containing 10 (batch STS10) and 20 (STS20) w/w% sucrose, as a function of temperature (T) and water content (c(w)). To circumvent important losses of water upon heating while recording the PALS spectra, a new method is developed: instead of a series of measurements of τ(3), the triplet positronium lifetime, at different T, the latter is kept constant and the series relates to c(w), which is left to decrease at a constant rate. Similarly to the changes in τ(3) with T, the τ(3)vs. c(w) plots obtained show a smooth linear increase until a break, denoting the occurrence of glass transition, followed by a sharper increase. The gradients appear to be independent of T. The variation of the glass transition temperature, T(g), with c(w) shows a broad sigmoid with a large linear central part; as expected from the plasticising effect of sucrose, the plot for STS20 lies some 10 K below that for STS10. Results from differential scanning calorimetry for STS20 yield T(g) values some 15 K higher than from PALS. On the basis of the general shape of the τ(3)vs. T variations, a general equation is set for τ(3)(T, c(w)), leading one to expect a similar shape for τ(3)vs. c(w), as experimentally observed.     

Positron studies of the temperature-dependence of free volumes in Polydimethylsiloxane/poly(propylene oxide) urethane/urea membranes

Free-volume parameters in polyurethane/urea membranes have been studied by positron annihilation lifetime and Doppler broadening measurements. The bi-soft segment membranes were obtained by varying the ratio of the structural constituents, polypropylene oxide and polydimethylsiloxane (PU/PDMS), with PDMS content from 25 to 75 wt%. The free-volume holes determined by PALS are correlated with gas permeation features. The phase separation of the various soft and hard segments in the membranes is mirrored in both lifetime and Doppler results.     

Comparison of sieving matrices for on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments

Commercially available, replaceable sieving matrices and their solvent modulated forms were evaluated for use in on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments in capillary electrophoresis. The fragments were labeled with dyes that can be excited by the 488 nm line of an argon ion laser and have lifetimes in the range of 0.8 ns to 3.8 ns. The sieving matrices and buffer systems included poly(vinylpyrrolidone) (PVP), poly(ethyleneoxide) (PEO), hydroxyethylcellulose (HEC), Tris-borate-EDTA (TBE) and Tris-TAPS-EDTA buffers modified with DMSO and formamide. Selection of the optimal sieving matrix is based on the separation efficiency and the enhancement of lifetime resolution of DNA fragments. Best results for both electrophoretic resolution and lifetime detection were obtained using a poly(ethyleneoxide)/TBE gel buffer in the presence of 10% formamide. Received: 25 August 2000 / Revised: 7 November 2000 / Accepted: 14 November 2000     

Positron annihilation and relaxation dynamics from dielectric spectroscopy and nuclear magnetic resonance: cis-trans-1,4-poly(butadiene)

We report a joint analysis of positron annihilation lifetime spectroscopy (PALS), dielectric spectroscopy (BDS), and nuclear magnetic resonance (NMR) on cis-trans-1,4-poly(butadiene) (c-t-1,4-PBD). Phenomenological analysis of the orthopositronium lifetime τ(3)-T dependence by linear fitting reveals four characteristic PALS temperatures: T(b1)(G)=0.63T(g)(PALS), T(g)(PALS), T(b1)(L)=1.22T(g)(PALS), and T(b2)(L)=1.52T(g)(PALS). Slight bend effects in the glassy and supercooled liquid states are related to the fast or slow secondary β process, from neutron scattering, respectively, the latter being connected with the trans-isomers. In addition, the first bend effect in the supercooled liquid coincides with a deviation of the slow effective secondary β(eff) relaxation related to the cis-isomers from low-T Arrhenius behavior to non-Arrhenius one and correlates with the onset of the primary α process from BDS. The second plateau effect in the liquid state occurs when τ(3) becomes commensurable with the structural relaxation time τ(α)(T(b2)). It is also approximately related to its crossover from non-Arrhenius to Arrhenius regime in the combined BDS and NMR data. Finally, the combined BDS and NMR structural relaxation data, when analyzed in terms of the two-order parameter (TOP) model, suggest the influence of solidlike domains on both the annihilation behavior and the local and segmental chain mobility in the supercooled liquid. All these findings indicate the influence of the dynamic heterogeneity in both the primary and secondary relaxations due to the cis-trans isomerism in c-t-1,4-PBD and their impact into the PALS response.     

Evolution of the crosslink structure in the elastomers NR and SBR

An experimental positron annihilation lifetime spectroscopy (PALS), differential scanning calorimetry (DSC) and small angle X-ray scattering (SAXS) study of the effect of the advance of the crosslinking reaction on the free volume in a copolymer of styrene–butadiene and natural rubbers was carried out. The crosslink density developed in SBR specimens with different sulfur contents and cure temperatures was studied. SAXS technique was applied to study the process of crosslinking in NR as a function of the cure temperature. Finally, a study of different SBR/NR blends is presented using PALS and DSC.     

辐射交联聚乙烯的正电子湮灭研究

Positron annihilation lifetime spectroscope(PALS) was applied to investigate the micro-structural changes of polyethylene(PE) which was irradiated by γ-ray or ultraviolet radiation, the spectra were decomposed into three lifetime components using PATFIT package. Then it was found that the shifts of the degree of cross linking and crystallinity were detected effectively in samples. Moreover, a small quantity of oxygen, which involved in the cross linking process, was measured sensitively by PALS. The regularity of positron lifetime intensity vs radiation intensity in γ irradiated sample was opposite to that in ultraviolet irradiated one, which is due to the preparation methods of samples and the change of polar functional group in initiator. Furthermore, contrastive patterns were studied by positron doppler broaden(DB) method and the results were agreed well with PALS data mentioned above.     

Natural rubber/styrene-butadiene rubber blends prepared by solution mixing: Influence of vulcanization temperature using a Semi-EV sulfur curing system on the microstructural properties

Blends of natural rubber (NR) and styrene-butadiene rubber (SBR) were prepared by solution mixing and vulcanized with sulfur and accelerator in a Semi-EV system at 433 K and 443 K in order to study the vulcanization kinetic and the influence of vulcanization temperature on final structure of the blends. The vulcanization kinetic studied through the variation in rheometer curves was analyzed using the Ding and Leonov model, which takes into account the reversion effect during the cure process. The average free nanohole volume and the fractional free volume of samples with different NR/SBR ratio were estimated using positron annihilation lifetime spectroscopy (PALS). Also, the crosslink density was determined by means of swelling tests in a solvent. For all the compounds, a correlation between the free nanohole volume and the delta torque obtained from the respective rheometer curves was established.     

Nanoporosity of Polymer Membrane Materials and Sorbents According to Positron Annihilation and Low-Temperature Gas Sorption Data

Based on the experimental data obtained by the authors in a number of previous studies, the limits of applicability of positron annihilation lifetime spectroscopy (PALS) and low-temperature gas sorption (LTGS) to determination of nanoporosity (size distribution of nanopores in the range from a few fractions of a nanometer to 50 nm) in polymeric membrane materials and sorbents are discussed. It turns out that none of these methods is universal. The possibility of using each of them is determined by different factors, with the cases considered being finely divided polymer materials and the membranes per se cast from powders. It has been shown that the particle size factor is important for the applicability of LTGS. The possibility of using PALS depends on the concentration of nanopores of a given size.     

Tunable pores in mesoporous silica films studied using a pulsed slow positron beam

Positron annihilation lifetime spectroscopy (PALS) based on a pulsed slow positron beam was applied to study mesoporous silica films, synthesized using amphiphilic PEO–PPO–PEO triblock copolymers as structure-directing agents. The pore size depends on the loading of different templates. Larger pores were formed in silica films templated by copolymers with higher molecular-weights. Using 2-dimensional PALS, open porosity of silica films was also found to be influenced by the molecular-weight as well as the ratio of hydrophobic PPO moiety of the templates.     

Comparison of sieving matrices for on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments

Commercially available, replaceable sieving matrices and their solvent modulated forms were evaluated for use in on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments in capillary electrophoresis. The fragments were labeled with dyes that can be excited by the 488 nm line of an argon ion laser and have lifetimes in the range of 0.8 ns to 3.8 ns. The sieving matrices and buffer systems included poly(vinylpyrrolidone) (PVP), poly(ethyleneoxide) (PEO), hydroxyethylcellulose (HEC), Tris-borate-EDTA (TBE) and Tris-TAPS-EDTA buffers modified with DMSO and formamide. Selection of the optimal sieving matrix is based on the separation efficiency and the enhancement of lifetime resolution of DNA fragments. Best results for both electrophoretic resolution and lifetime detection were obtained using a poly(ethyleneoxide)/TBE gel buffer in the presence of 10% formamide.     

Radiation effect on positronium formation in low-temperature polyethylene

The irradiation effect of γ-rays on polyethylene (PE) has been studied by positron annihilation lifetime spectroscopy (PALS). In the case of non-irradiated PE samples, at a low temperature below the glass-transition temperature, the intensity of the long-lived component of positronium, I₃, increases due to an increase in the concentration of trapped electrons. However, the increase in I₃ obtained in a few MGy γ-irradiated samples became very small due to the effect of induced radicals. It has been observed that the trapped electrons were affected by the intensity of the positron sources used for a PALS experiment.     

Synthesis of silica nanoparticles using oil-in-water emulsion and the porosity analysis

A set of silica particles was synthesized in oil–in–water emulsion with particle diameters ranging from ~42?nm to ~115?nm approximately. The porosity of the nanoparticles was analyzed using conventional nitrogen sorption and positron annihilation lifetime spectroscopy (PALS) techniques. The isotherm obtained using nitrogen sorption indicated that the particles were ‘non-porous?? however fitting data with Density Functional Theory model revealed a low concentration pore with diameters from 1.4?nm to 1.7?nm. The pore size was independent of the particle size. In contrast, analysis with PALS revealed a single pore size of ~0.6?nm present in all samples. Difference in results obtained for micropores <4?nm diameter is proposed to be dependent on models used and sample conditions for analysis.     

Towards a rehabilitation of the generalized rank annihilation method (GRAM)

The trilinear PARAFAC model occupies a central place in multiway analysis, because the components of a data array can often be uniquely resolved. This paper compares the resolution for a large variety of methods, namely the generalized rank annihilation method (GRAM), alternating least squares (ALS), alternating trilinear decomposition (ATLD), alternating coupled vectors resolution (ACOVER), alternating slice-wise diagonalization (ASD), alternating coupled matrices resolution (ACOMAR), self-weighted alternating trilinear decomposition (SWATLD), and pseudo alternating least squares (PALS). The comparison was conducted using Monte Carlo simulations. It was shown that GRAM performs well for moderately and highly overlapped data. These results argue strongly against the previously claimed superiority of the alternatives listed above.     

Study of the size and numerical concentration of the free volume of carbon filled HDPE composites by the positron annihilation method

In this paper, the size and numerical concentration of free volume of high density polyethylene/carbon black (HDPE/CB) composite were investigated by positron annihilation lifetime spectroscopy (PALS). The PALS were measured in two series of samples, one with various CB contents in the composites and the other with changing the temperature of HDPE/CB composite containing 25 phr CB. It was found that the important parameters of PALS show their fluctuation around the percolation threshold. The conductivity of HDPE/CB is controlled by CB contribution, and that can be reflected in o-Ps lifetime. The temperature dependence of positron lifetimes reveals that the existence of glass transition temperatures and the size of free volume holes increases when temperature increases above glass transition. The results observed from the second set of samples suggest that positive temperature coefficient is in some way related with free volume expansion. The experiment facts implied that the conductivity of HDPE/CB was related with not only the size of free volume holes but also the number of free volume holes. The Doppler-broadening of HDPE/CB was also investigated.     

Positronium annihilation lifetimes and dielectric spectroscopy studies on diethyl phthalate: phenomenological correlations and microscopic analyses in terms of the extended free volume model by Cohen-Grest

A combined positronium annihilation lifetime spectroscopy (PALS) and dielectric spectroscopy (DS) study on a typical van der Waals glass-former diethyl phthalate (DEP) was performed and the results were compared. From phenomenological point of view, the mutual relationships between the characteristic PALS temperatures, the glass temperature TgPALS, and the crossover temperatures Tb1L and Tb2L on the ortho-positronium (o-Ps) lifetime versus the temperature plot, have been discussed with respect to the characteristic DS temperatures, the glass temperature TgDS and the dynamic crossover temperature TBST, concerning the crossover behavior of primary alpha-relaxation times. Next, simultaneous application of the extended free volume (EFV) model by Cohen-Grest on the temperature dependence of both the mean free volume hole size data as extracted from PALS and the dielectric alpha-relaxation time revealed a good agreement between the experimental Tb1L and the characteristic EFV temperatures T0DS and T0PALS at which a free volume percolation should occur. These results indicate the important role of free volume in control of the primary (alpha) dynamics of supercooled DEP.     

Amorphous-amorphous transition in glassy polymers subjected to cold rolling studied by means of positron annihilation lifetime spectroscopy

In this study, polycarbonate (PC) and polystyrene (PS) are subjected to plastic deformation by means of cold rolling and the resulting variation of the free volume and its subsequent time evolution after rolling is investigated by means of positron annihilation lifetime spectroscopy (PALS). The value of the long lifetime component that is attributed to the decay of ortho-positronium (tau(o-Ps)) and its intensity (I(o-Ps)) are used to characterize, respectively, the size and the concentration of the free-volume holes. In addition to the PALS experiments, the effect of plastic deformation on the dynamic tensile modulus is investigated. The PALS results show that both for well-aged PC and PS an increase of tau(o-Ps) and a decrease of I(o-Ps) occur upon plastic deformation. During the subsequent aging, tau(o-Ps) tends to return to the value assumed before plastic deformation, while I(o-Ps) remains constant with time. These results corroborate the idea of an amorphous-amorphous transition, rather than that of a "mechanical rejuvenation" as proposed in the past to explain the ability of plastic deformation to reinitiate physical aging. Finally, a linear relation between the size of the free-volume holes and the dynamic tensile modulus is found, which suggests that the stiffness of amorphous glassy polymers is fully determined by their nanoscopic structure.     

The buildup of the electric field during positron annihilation lifetime spectroscopy measurement

Positron annihilation lifetime spectra were measured on pure polystyrene (PS) and PS samples whose film surfaces were coated with gold, graphite (GR‐PS), or M_oS₂. The results showed the longest lifetime remained constant with measured time in all experimental samples, whereas the corresponding intensity decreased with time at different rates. The experimental phenomena were associated with the buildup of an electric field inside the polymer during extended positron annihilation lifetime spectroscopy (PALS) measurement. The decrease in the rate was attributed to the presence of conductive film causing the neutrality between positive charges and negative charges, thereby reducing the buildup of the electric field. Additionally, we also performed PALS measurement on GR‐PS under different experimental conditions, such as the conductive film being grounded or not grounded or the presence of an external electric field. These results further indicated that the buildup of the electric field was responsible for the decrease in the intensity with time. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 332–336, 2001     

Revealing the Nano‐Level Molecular Packing in Chitosan–NiO Nanocomposite by Using Positron Annihilation Spectroscopy and Small‐Angle X‐ray Scattering

Chitosan–NiO nanocomposite (CNC) is shown to be a potential dielectric material with promising properties. CNCs containing NiO nanoparticles (0.2, 0.6, 1, 2, 5 wt %) are prepared through chemical methods. The inclusion of NiO nanoparticles in the chitosan matrix is confirmed by scanning electron microscopy (SEM) and X‐ray diffraction. The morphology of the NiO nanoparticles and the nanocomposites is investigated by transmission electron microscopy and SEM, respectively. Positron annihilation lifetime spectroscopy (PALS) and the coincidence Doppler broadening (CDB) technique are used to quantify the free volume and molecular packing in the nanocomposites. The triplet‐state positronium lifetime and the corresponding intensity show the changes in nanohole size, density, and size distribution as a function of NiO loading. Small‐angle X‐ray scattering indicates that the NiO aggregates are identical in all the CNCs. The momentum density distribution obtained from CDB measurements excludes the possibility of a contribution of vacant spaces (pores) available in NiO aggregates to the free volume of nanocomposites upon determination by using PALS. The results show systematic variation in free‐volume properties and nano‐level molecular packing as a function of NiO loading, which is presumed to play a vital role in determining the various properties of the nanocomposites.     

Transport properties of water in hydroxypropyl methylcellulose

The relation between the self-diffusion coefficient, D_self, of water and the free volume hole size, V_h, has been investigated in a hydroxypropyl methylcellulose (HPMC)-water system in the water content range 0.08-0.36 w/w, at room temperature. Furthermore, the thermal properties of the water in the HPMC-water system, as measured with differential scanning calorimetry (DSC) and the tensile storage, E′, and tensile loss, E″, moduli, of the HPMC-water systems, as determined with dynamic mechanical analysis (DMA), have been probed. Pulsed-field gradient nuclear magnetic resonance (PFG NMR) was used to measure the D_self of water and positron annihilation lifetime spectroscopy (PALS) was used to measure the ortho-Positronium (o-Ps) lifetime in the HPMC-water system. The glass transition temperature of the HPMC was found to be reduced by the water to room temperature in the water content range 0.10-0.15 w/w. The relation between ln D_self of water and the inverse free volume hole size of the HPMC-water system was non-linear. Furthermore, the PALS measurements showed that molecular water co-existed with water clusters in the HPMC-water system.