A versatile synthesis for new 9,10-bis(4-alkoxyphenyl)-2,7-diiodophenanthrenes: useful precursors for conjugated polymers

A practical synthesis for 9,10-bis(alkoxyphenyl)-2,7-diiodophenanthrenes is described. 9,10-Bis(4-hexyloxyphenyl)-2,7-diiodophenanthrene was selectively obtained by a one-pot reaction of 10,10-bis-(4-hexyloxy-phenyl)-2,7-diiodo-10H-phenanthren-9-one with 1 equiv of triethylsilane in trifluoroacetic acid. The target molecular architecture was demonstrated to be a useful precursor for obtaining the corresponding poly(phenanthrene) and poly(phenanthrylene-vinylene).     

Synthesis of new polyconjugated compounds based on 9,10-diphenylphenanthrene

A procedure was developed for the synthesis of dimethyl 9,10-diphenylphenanthrene-2,7-dicarboxylate, and the latter was used as starting compound for the preparation of 9,10-diphenyl-2,7-bis(2-phenylethenyl) phenanthrene derivatives and 2,7-bis[(E)-2-(1,3-benzoxazol-2-yl)ethenyl]-9,10-diphenylphenanthrene, which showed strong luminescence in the solid state and in solution. Spectral properties of the products were studied.     

Light‐Harvesting Nanotubes Formed by Supramolecular Assembly of Aromatic Oligophosphates

A 2,7‐disubstituted phosphodiester‐linked phenanthrene trimer forms tubular structures in aqueous media. Chromophores are arranged in H‐aggregates. Incorporation of small quantities of pyrene results in the development of light‐harvesting nanotubes in which phenanthrenes act as antenna chromophores and pyrenes as energy acceptors. Energy collection is most efficient after excitation at the phenanthrene H‐band. Fluorescence quantum yields up to 23 % are reached in pyrene doped, supramolecular nanotubes.     

Dihydrophenanthrenes from Bletilla formosana

Three new dihydrophenanthrenes, 4-methoxy-9,10-dihydrophenanthrene-1,2,7-triol (1), 1-(4-hydroxybenzyl)-4,7-dimethoxy-9,10-dihydrophenanthrene-2-ol (2), and 1,3,6-tri(4-hydroxybenzyl)-4-methoxydihydrophenanthrene-2,7-diol (3) together with seven known phenanthrene derivatives, six known flavonoids, a bibenzyl and three phenolic compounds were isolated from the whole plant of Bletilla formosana. Their structures were elucidated by spectroscopic, mainly 2D NMR spectrometry and chemical methods.     

Tetraalkoxyphenanthrene: a new precursor for luminescent conjugated polymers

[reaction: see text] We have developed a convenient synthesis of tetraalkoxyphenanthrene derivatives and demonstrated their use to form luminescent conjugated oligomers and polymers. Palladium-catalyzed cross-coupling reactions of 2,7-diiodo-3,6-dimethoxy-9,10-di(2-ethylhexyloxy)phenanthrene produced high molecular weight poly(p-phenylene ethynylene)s and low molecular weight poly(p-phenylene vinylene)s. These new polymers, which are luminescent in the solid state and in solution, may be useful for developing LED or solar cell devices, or in chemical sensors.     

Synthesis and structures of diindeno-fused 1,12-diphenylbenzo[c]phenanthrene and 1,14-diphenyl[5]helicene bearing severe helical twists

Diindeno-fused 1,12-diphenylbenzo[c]phenanthrene 15 and 1,14-diphenyl[5]helicene 20 were prepared in a four-step synthetic sequence from 2,7-naphthalenedicarboxylic acid and 3,6-phenanthrenedicarboxylic acid, respectively. The X-ray structures of 15 and 20 show that the fused ring systems possess severe helical twists. The rotational barriers of the phenyl substituents were determined by the analysis of temperature-dependent 1H NMR spectra. [structure: see text]     

Oligo(2,7-fluorene ethynylene)s with pyrene moieties: synthesis, characterization, photoluminescence, and electroluminescence

A series of highly fluorescent, pyrene-modified oligo(2,7-fluorene ethynylene)s were synthesized and fully characterized. Different emissions were observed between pyrene-end-capped and pyrene-centered oligo(2,7-fluorene ethynylene)s. Moreover, these oligomers were applied to fabricate organic light-emitting diodes (OLEDs), and bright blue or green electroluminescence (EL) with good device performances was achieved in multilayer OLEDs. These pyrene-modified oligo(2,7-fluorene ethynylene)s could be used as optoelectronics materials or models to investigate fluorescent structure-property relationship of fluorene derivatives.     

Preparation of hexafluoro-1,8- and -2,7-naphthyridine

Hexachloro-1,8- and -2,7-naphthyridine have been prepared from 2,7-dichloro-1,8-naphthyridine and 1,3,6,8-tetrachloro-2,7- naphthyridine respectively. From these products and their starting materials a series of partially and totally fluorine substituted compounds have been derived.     

Steady-state and time-resolved studies of 2,7-carbazole-based conjugated polymers in solution and as thin films: determination of their solid state fluorescence quantum efficiencies

The UV–Vis absorption spectra and the luminescence properties of poly(N-octyl-2,7-carbazole) (POC) and poly(N-octyl-2,7-carbazole-alt-9,9-dioctyl-2,7-fluorene) PCF have been investigated in solution and in the solid state (thin films). No aggregate and/or excimer formation has been detected in these polymeric systems. From time-resolved fluorescence measurements in solution and in the solid state, the fluorescence efficiencies of the thin films have been estimated. It is found that the fluorescence efficiencies of these polycarbazoles in the solid state are quenched, as compared to those measured in fluid solutions, but remain relatively high (φ_F0.40), making them promising materials for electroluminescent devices.     

Synthesis and properties of naphthalene trimers linked by 1,3,4-oxadiazole spacers

Two types of naphthalene trimers linked by 1,3,4-oxadiazole spacers were synthesized and investigated for their physical and electronic properties. 2,6- and 2,7-isomers on central naphthalene moieties were obtained in the forms of pale yellow solids and colorless crystals, respectively. The melting point of the 2,6-isomer was higher than that of the 2,7-isomer. An X-ray crystallographic analysis revealed a π-stacked column with a short intermolecular distance in the crystals of the 2,6-isomer. The absorption maximum of the 2,6-isomer was red-shifted as compared to that of the 2,7-isomer, indicating a π-conjugation between di-2-naphthyloxadiazole moieties in the 2,6-isomer. The quantum yields of the 2,6- and 2,7-isomers were measured to be 0.97 and 0.74, relative to that of 2,5-di-2-naphthyl-1,3,4-oxadiazole (0.85). Molecular orbital (MO) calculations demonstrated that the 2,6-isomer had a higher electron affinity than the 2,7-isomer. Thus, the crosslinking of building blocks is important for the design of functional materials.     

Synthesis of epoxy resins derivatives of naphthalene-2,7-diol and their cross-linked products

The aim of this study was the synthesis of three different epoxy compounds based on naphthalene-2,7-diol (2,7-NAF.EP, 2,7-NAF.WEP, 2,7-NAF.P.EP) and then their cross-linking by triethylenetetramine (TETA). All epoxides were prepared by the reaction of naphthalene-2,7-diol with epichlorohydrin but under different conditions and with other catalysts. The structures of the obtained compounds before and after the cross-linking reactions were confirmed by the attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FT-IR). The ATR/FT-IR spectra of cross-linked compounds show disappearance of the C–O–C bands (about 915 cm^?1) derived from the epoxy groups. DSC and TG/DTG measurements indicated that the obtained materials possess good thermal resistance; they are stable up to about 250 °C. The hardness of the cross-linked products was determined using the Shore D method. The highest value of hardness was obtained for the 2,7-NAF.EP-POL. Additionally, the UV–Vis absorption spectra of the obtained polymers were registered and evaluated.

     

Photocyclodehydrofluorination

Mallory‐type photocyclization involves a series of photoreactions of stilbenes, o‐terphenyls and related derivatives, which undergo intramolecular cyclization via dihydrophenanthrene intermediates. In typical Mallory photocyclizations, oxidants are usually needed to produce the final phenanthrene‐containing product. In the research described here, appropriately fluorinated stilbenes and o‐terphenyls undergo ring closure and HF is eliminated. This photocyclodehydrofluorination (PCDHF) reaction is very useful to produce a wide range of selectively fluorinated polynuclear aromatic hydrocarbons that possess a phenanthrene (or heterocyclic analogue of phenanthrene) substructure. These fluorinated products are of great interest in various aspects of the materials science.     

Photoinduced electron transfer and nonlinear absorption in poly(carbazole-alt-2,7-fluorene)s bearing perylene diimides as pendant acceptors

This paper reports the synthesis, photophysical behavior, and use in nanosecond optical-pulse suppression of a poly(2,7-carbazole-alt-2,7-fluorene) and a poly(3,6-carbazole-alt-2,7-fluorene) in which the carbazole N-positions are linked by an alkyl chain to one of the nitrogen atoms of a perylene-3,4,9,10-tetracarboxylic diimide (PDI) acceptor. It was found that the PDI pendants on the polymer side chain aggregated even in dilute solution, which extended the onset of PDI absorption into the near-infrared (NIR). Transient-absorption spectra of these polymers provide evidence for efficient electron transfer following either donor or acceptor photoexcitation to form long-lived charge-separated species, which exhibit strong absorption in the NIR. The spectral overlap between the transient species and the long-wavelength absorption edge of the aggregated PDI leads to reverse saturable absorption at 680 nm that can be used for optical-pulse suppression. Additionally, at high input energies, two-photon absorption mechanisms may also contribute to the suppression. PDI-grafted polymers exhibit enhanced optical-pulse suppression compared with blends of model materials composed of unfunctionalized poly(carbazole-alt-2,7-fluorene)s and PDI small molecules.     

Short-time pyrolysis and spectroscopy of unstable compounds: 9. Elucidation of thermal rearrangement mechanisms by Curie-point and flow pyrolysis

Aromatic hydroxy and carbonyl compounds undergo elimination of carbon monoxide upon pyrolysis. The methods of Curie-point and vacuum-flow pyrolysis have been used. A flow pyrolysis apparatus coupled with a cell for low-temperature ultraviolet and infrared measurements is described. 1,5- 1,6-, 1,7-, 2,6- and 2,7-naphthalenediol are pyrolyzed to give 4-, 5-, 6-, and 7-indenole. 2,3-Naphthalenediol eliminates the first CO to form 2-indanone, which can eliminate CO, forming benzocyclobutene. Fuchsone loses CO and the resulting biradical rearranges either to benzo[c]phenanthrene or to 1-phenylacenaphthylene. Bisanthrone forms (phenanthreno-9′,10′:9,10-phenanthrene)-1,1′-methylene ketone and dibenzo[g, p]chrysene by the same mechanism.     

Complexation and extraction of PAHs to the aqueous phase with a dinuclear Pt(II) diazapyrenium-based metallacycle

New palladium and platinum metallacycles have been synthesized by reaction between a 2,7-diazapyrenium-based ligand and Pd(II) and Pt(II) complexes. The inclusion complexes between the metallacycles and polycyclic aromatic hydrocarbons (PAHs) in CD(3)NO(2) and D(2)O were studied by NMR spectroscopy. The structures of the inclusion complexes of the Pt metallacycle as host with pyrene, phenanthrene, and triphenylene were confirmed by single crystal X-ray crystallography. The association constants between the Pt metallacycle and the selected PAHs were determined in CH(3)CN following the characteristic charge-transfer band displayed in their UV/Vis absorption spectrum. Although in aqueous solution all the complexes showed a 1:1 stoichiometry, in CH(3)CN the Job plot indicated a 2:1 stoichiometry for complexes with triphenylene and benzo[a]pyrene. The estimated association constants in water correlate with the hydrophobicity of the PAH, indicating that hydrophobic forces play an important role in the complexation process.     

含硫甲基的芴-苯结构化合物的合成、结构和性能

通过双Suzuki偶联反应一步合成了2种含硫甲基的芴-苯结构化合物2,7-二(4-硫甲基苯基)-9,9-二己基-芴(a)和2,7-二(2,6-二甲基-4-硫甲基苯基)-9,9-二己基-芴(b).紫外-可见和荧光光谱以及分子轨道理论计算表明,位阻较小的化合物a具有更好的共轭性能,其最大紫外-可见吸收波长达到351nm,比两端苯基含4个邻位取代基的化合物b红移了38nm;化合物a的最大荧光发射波长达到410nm,为典型的蓝光化合物,比化合物b红移了43nm.化合物a和b都具有较高的荧光量子产率,分别为59%和65%,在光电材料方面具有潜在的应用前景.     

Self-assembling poly(dioxaborole)s as blue-emissive materials

Conjugated, borole-linked polymers have been self-assembled based on boronate ester formation between a fluorene-2,7-diboronic acid and 1,2,4,5-tetrahydroxybenzene. Readily soluble polymers with molecular weights approaching 60 000 have been generated with materials exhibiting extended conjugation over approximately 3-5 borole linkages. Emission from these polymers reaches into the visible (blue) range, representing a novel class of blue-emitting materials.     

Evaluation of image sticking property on liquid crystal displays with polymer layers produced from phenanthrene-carrying monomers

As a model of polymer-sustained-alignment liquid crystal display (PSA-LCD), the liquid crystal (LC) cells having the polymer layers produced from monomers of phenanthrene (Phen)-carrying monomers, 2,7-, 3,8-, 1,8- and 3,6-dimethacryloyl-oxy-phenanthrene (DMAPhen), were prepared and investigated image sticking phenomenon with evaluations of residual direct current voltage (V_rDC) and difference in pretilt angle before and after application of alternate current voltage (Δtilt). The V_rDC values were small for the LC cells with the polymer layers produced from the Phen-carrying monomers used in this study. On the other hand, Δtilt depends on the molecular structure of the Phen-carrying monomer. The Δtilt values became small with increasing the linearity of the monomer structure for the Phen-carrying monomers. The findings would be useful for obtaining the small level of image sticking in the PSA-LCDs produced from the Phen-carrying monomers.     

Copolymers comprising 2,7-carbazole and bis-benzothiadiazole units for bulk-heterojunction solar cells

On the basis of theoretical considerations of the intramolecular charge transfer (ICT) effect, we have designed a series of donor (D)–acceptor (A) conjugated polymers based on bis‐benzothiadiazole (BBT). A PPP‐type copolymer of electron‐rich 2,7‐carbazole (CZ) and electron‐deficient BBT units poly[N‐(2‐decyltetradecyl)‐2,7‐carbazole‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazole)}] ( PCZ‐BBT ), a PPV‐type copolymer poly[N‐(2‐decyltetradecyl)‐2,7‐carbazolevinylene‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazolevinylene)}] ( PCZV‐BBTV ), and a tercopolymer based on carbazole, thiophene, and BBT poly[N‐(2‐decyltetradecyl)‐2,7‐(di‐2‐thienyl)carbazole‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazole)}] ( PDTCZ‐BBT ) have been synthesized to understand the influence of BBT acceptor structure and linkage on the photovoltaic characteristics of the resulting materials. Both the HOMO and LUMO of the resulting polymers are found to be deeper‐lying than those of benzothiadiazole‐based polymers. The measured electrochemical band gaps (eV) are in the following order: PDTCZ‐BBT (1.65 eV) < PCZV‐BBTV (1.69 eV) < PCZ‐BBT (1.75 eV). All the polymers provide a photovoltaic response when blended with a fullerene derivative as an electron acceptor. The best cell reaches a power conversion efficiency of 2.07 % estimated under standard solar light conditions (AM1.5G, 100 mW cm^?2). We demonstrate for the first time that BBT‐based polymers are promising materials for use in bulk‐heterojunction solar cells.     

Polycarbazoles: 25 Years of Progress

Summary: Carbazole‐based oligomeric and polymeric materials have been studied for almost 25 years for their unique electrical, electrochemical and optical properties. Interestingly, carbazole units can be linked in two different ways leading to either poly( 3,6 ‐carbazole) or poly( 2,7 ‐carbazole) derivatives. While the former class seems to be very interesting for electrochemical and phosphorescence applications, the latter shows very promising optical properties in the visible range for light emitting diodes (LED). The major intrinsic difference between these two classes is the effective conjugation length: poly(2,7‐carbazole) materials having the longer one, due to their poly(p‐phenylene)‐like structure. Using different synthetic strategies and substitution patterns, the physico‐chemical properties of both classes can be fine‐tuned, leading to high performance materials for a large number electronic applications.

Chemical structures for poly(3,6‐carbazole) and poly(2,7‐carbazole) and the materials used as the starting points for their respective syntheses.