A.c. conductivity and relaxation in LiCoVO4 ceramics

The LiCoVO₄ compound is synthesized by solution-based chemical method. X-ray diffraction analysis exhibits a single phase nature of the compound with cubic structure. The dielectric constant (ε_r), tangent loss (tanδ) and a.c. conductivity (σ_ac) have been studied as a function of frequency and temperature using complex impedance spectroscopy (CIS) technique. The variation of (ε_r and tanδ) with frequency at studied temperatures shows a dispersive behavior at low frequencies. Frequency dependence of σ_ac at different temperatures obeys Jonscher’s universal power law governed by the relation: σ_ac = σ_dc + Aωⁿ, where n is the frequency exponent in the range of 0 ⩽ n ⩽ 1 and A is a constant that depends upon temperature.     

High resolution emission spectroscopy of the E2Π–X2Σ+ transition of SrH and SrD

Emission spectra of SrH and SrD have been studied at high resolution using a Fourier transform spectrometer. The molecules have been produced in a high temperature furnace from the reaction of strontium metal vapor with H₂/D₂ in the presence of a slow flow of Ar gas. The spectra observed in the 18 000–19 500 cm^?1 region consist of the 0–0 and 1–1 bands of the E²Π–X²Σ⁺ transition of the two isotopologues. A rotational analysis of these bands has been obtained by combining the present measurements with previously available pure rotation and vibration–rotation measurements for the ground state, and improved spectroscopic constants have been obtained for the E²Π state. The present analysis provides spectroscopic constants for the E²Π state as ΔG(½) = 1166.1011(15) cm^?1, B_e = 3.805503(32) cm^?1, α_e = 0.098880(47) cm^?1, r_e = 2.1083727(89) Å for SrH, and ΔG(½) = 839.1283(23) cm^?1, B_e = 1.918564(15) cm^?1, α_e = 0.034719(23) cm^?1, r_e = 2.1121943(83) Å for SrD.     

Diffusion-promoted-desorption mechanism for D2 desorption from Si(100) surfaces

Temperature-programmed-desorption (TPD) spectra and isothermal desorption rates of D₂ molecules from a Si(100) surface have been calculated to reproduce experimental β_1, A-TPD spectra and isothermal desorption rate curves. In the diffusion-promoted-desorption (DPD) mechanism, hydrogen desorption from the Si(100) (2 × 1) surfaces takes place via D atom diffusion from doubly-occupied Si dimers (DODs) to their adjacent unoccupied Si dimers (UODs). Taking a clustering interaction among DODs into consideration, coverages θ_DU of desorption sites consisting of a pair of a DOD and UOD are evaluated by a Monte Carlo (MC) method. The TPD spectra for the β_1, A peak are obtained by numerically integrating the desorption rate equation R = ν_A exp(? E_d, A / k_BT)θ_DU, where ν_A is the pre-exponential factor and E_d, A is the desorption barrier. The TPD spectra calculated for E_d, A = 1. 6 eV and ν_A = 2.7 × 10⁹ /s are found to be in good agreement with the experimental TPD data for a wide coverage range from 0.01 to 0.74 ML. Namely, the deviation from first-order kinetics observed in the coverage dependent TPD spectra as well as in the isothermal desorption rate curves can be reproduced by the model simulations. This success in reproducing both the experimental TPD data and the very low desorption barrier validates the proposed DPD mechanism.     

The experimental study of Ba 6pjnk |M| = 0, 1 autoionizing series

The spectra of the Ba 6pnk autoionizing Stark states with |M| = 0, 1, converging to the 6p_1/2⁺ and 6p_3/2⁺ ionization thresholds, are measured as a function of the electric field strength F. Several 6p_jnk Stark manifolds with n = 13–15 have been systematically studied in order to explore their characteristics of configuration interaction. Experimental results are analyzed by fitting them to the Lorentzian profile, from which the positions and widths are determined. Different spectroscopic properties between the Ba 6p_1/2nk and 6p_3/2nk autoionizing Stark states are investigated. Comparison between the Ba 6p_jnk autoionizing Stark states with |M| = 0 and those with |M| = 1 are made.     

The layered iron phosphate KMgFe(PO4)2: Crystal structure,Mössbauer spectroscopy and ionic conductivity

A new iron phosphate, KMgFe(PO₄)₂ has been synthesized and investigated by X-ray diffraction, Mössbauer spectroscopy and ionic conductivity. This compound crystallizes in the monoclinic space group C2/c with the parameters a = 18.529(7) Å, b = 5.402(3) Å, c = 9.374(9) Å, β = 120.64(5)° and Z = 4. Its original structure can be described as the stacking along the [101] direction of [MgFe(PO₄)^?₂]_∞ layers of corner-sharing MO₄ (M = 0.5 Fe + 0.5 Mg) and PO₄ tetrahedra. The K⁺ ions are occupying the inter-layer space. The Mössbauer spectroscopy confirms the occurrence of only tetrahedral Fe³⁺ ions and gives a definitive proof of the disordered character of their distribution. Ionic conductivity results obtained by the impedance spectroscopy technique show that this material is a two-dimensional ionic conductor, with low activation energy, 0.51 eV, that is interpreted on the basis of two-dimensional pathways.     

Interaction of dioxouranium(VI) ion with EDTA at different ionic strengths

The formation of complex species of dioxouranium(VI) ion with EDTA was studied in the pH range of 1–3.5 and at 25 °C using a combination of potentiometric and spectrophotometric techniques. Results showed evidence for formation of the following species: [UO₂H₄EDTA]²⁺, [UO₂H₃EDTA]⁺, and [UO₂H₂EDTA]. Investigations were performed in sodium perchlorate as background electrolyte at 0.1, 0.3, 0.5, 0.7, and 1.0 mol dm^? 3. The parameters based on the formation constants were calculated, and the dependences of protonation and the stability constants on ionic strength are described. The dependence on ionic strength of the formation constants was analyzed using the specific ion interaction theory (SIT) model. The stability constant values at infinite dilution, obtained using SIT model, are log β°₁₄₁ = 6.77, log β°₁₃₁ = 5.99 and log β°₁₂₁ = 9.29, where indexes for the overall stability constant, β_pqr, refer to the equilibrium pUO₂²⁺ + qH⁺ + rL^4? ? M_pH_qL_r^{(2p + q ? 4r)}. The specific interaction coefficients are also reported.     

Effects of excessive Zn2+ ions on intrinsic magnetic and structural properties of Ni0.2Zn0.6Cu0.2Fe2O4 powder prepared by chemical coprecipitation method

Zn(OH)₂ is a kind of amphoteric compound. Therefore, for chemical coprecipitation method, the precipitation of Zn²⁺ ions may be incomplete if using NaOH as precipitator. In this study, single-phase powder specimens with a nominal composition Ni_0.2Zn_0.6Cu_0.2Fe₂O₄ were prepared with chemical coprecipitation method, and the effects of excessive Zn²⁺ content (x, x = 3%, 5%, 7%, 9%) in working solution on intrinsic magnetic and structural properties were studied by vibrating sample magnetometer and X-ray diffractometer, respectively. It was found that the magnetization when H_m = 398 kA/m (5000 Oe) reached a maximum when x = 5%, and then decreased with the increase of x, which was attributed to the effect of different amount of Zn²⁺ in A sites on the A–B and B–B exchange interaction. Moreover, it was found that the lattice parameter was affected by the Zn²⁺ and Fe³⁺ ions due to their different ion radius to a certain extent.     

Recombination luminescence of CsI(Tl) under electron pulse irradiation

The luminescence kinetics of CsI(Tl) exposed to an electron pulse irradiation (E_e = 250 keV, t_1/2 = 10 ns, j = 2 ÷ 160 mJ/cm²) has been studied. It has been discovered that the slow emission rise is due to hole V_k–Tl⁰ recombination luminescence at temperature from 100 to 160 K and electron–V_kA recombination, where electrons released from single Tl⁰ at temperature from 180 to 300 K. The effect of Tl concentration on both processes has been investigated.     

A single-crystal study of the electrochemically Li-ion intercalated spinel-type Li4Ti5O12

Single crystals of Li_4 + xTi₅O₁₂ were prepared by means of electrochemical Li-ion intercalation technique using parent Li₄Ti₅O₁₂ single crystals. The obtained Li_4 + xTi₅O₁₂ (x = 1.35) crystallizes in the cubic spinel-related type structure, space group Fd3?m, and lattice parameters of a = 8.346(2) Å and V = 581.3(5) Å³ and Z = 8. The Li-ion intercalated sites were successfully determined to be both the 8a and 16c sites by using the difference Fourier synthesis map. The structure was determined by single-crystal X-ray structure analysis and refined to the conventional value of R = 3.7% for 132 independent observed reflections. The chemical composition has been determined to be Li_5.35Ti₅O₁₂ from the result of site-population refinements. In addition, theoretical electron density distributions and total energy were calculated for three postulated compounds of “Li_4.5Ti_4.5O₁₂” and “Li_4.5 + xTi_4.5O₁₂” with x = 1.5 and 3.0.     

First principles study of the structure,electronic state and stability of AlnAsm− anions

Structural and electronic properties of semiconductor binary microclusters Al_nAs_m⁻ anions have been investigated using the B3LYP-DFT method in the ranges of n = 1,2 and m = 1–7. Full structural optimization, adiabatic electron affinities calculation and frequency analysis are performed with the basis of 6–311 + G(d). The charged-induced structural changes in these anions have been discussed. The strong As–As bond is also favored over Al–As bonds in the Al_nAs_m⁻ anions in comparison with corresponding neutral cluster. Among different AlAs_m⁻ and Al₂As_m⁻ (m = 1–7) anions, AlAs₄⁻ and Al₂As₃⁻ are most stable.     

Titanium oxide thin layers deposed by dip-coating method: Their optical and structural properties

TiO₂ thin films were prepared by sol-gel method. The structural investigations performed by means of X-ray diffraction (XRD) technique and scanning electron microscopy (SEM) showed the shape structure at T = 600 °C. The optical constants of the deposited film were obtained from the analysis of the experimentally recorded transmittance spectral data in the wavelength of 200–3000 nm range. The values of some important parameters of the studied films are determined, such as refractive index n and thickness d. In this work, using the transmission spectra, we have calculated the dielectric constant (ε_∞) for four layered TiO₂ films; a simple relation is suggested to estimate the third-order optical nonlinear susceptibility χ⁽³⁾. It has been found that the dispersion data obeyed the single oscillator of the Wemple–DiDomenico model, from which the dispersion parameters and high-frequency dielectric constant were determined. The estimations of the corresponding band gap E_g, χ⁽³⁾ and ε_∞ are 2.57 eV, 0.021 · 10⁻¹⁰ esu and 5.20, respectively.     

Resonances in the final Rydberg state population of multiply charged ions ArVIII,KrVIII, and XeVIII escaping solid surfaces

The appearance of resonances (pronounced maxima at n_A = n_res) in the probability distributions for the population of the Rydberg state (n_A, l_A, m_A) of multiply charged ions (Z ? 1) escaping solid surfaces at intermediate velocities (v ≈ 1 a.u.) is discussed. Within the framework of the time-symmetrized two-state vector model, in which the state of a single active electron is described by two wave functions Ψ₁ and Ψ₂, the resonances are explained by means of an electron tunneling in the very vicinity of the ion–surface potential barrier top. To include this specific feature of electron transitions into the model, the appropriate etalon equation method is used in the calculation of the function Ψ₁. We consider the ions ArVIII, KrVIII, and XeVIII with the same core charges Z = 8 a.u., but with different core polarizations. The effect of the ionic core polarization is associated with the function Ψ₂. The population probabilities for n_A ≈ n_res are complemental to those obtained recently for n_A < n_res, and in sufficiently good agreement with available beam-foil experimental data. The pronounced resonances in the final population distributions are recognized only in the case of ArVIII ion and for the lower values of the solid work function (argon anomaly).     

Structural,ferroelectric, optical properties of A-site-modified Bi0.5(Na0.78K0.22)0.5Ti0.97Zr0.03O3 lead-free piezoceramics

We reported the role of A-site modification on the structural, ferroelectric, optical and electrical field-induced strain properties of Bi_0.5(Na_0.78K_0.22)_0.5Ti_0.97Zr_0.03O₃ lead-free piezoceramics. The Li⁺ ions with concentration from 0 to 5 mol% were used to substitute at A-site. There was no phase transition when Li⁺ ions was added up to 5 mol%. The electric field-induced strain (S_max/E_max) values increased from 600 to 643 pm/V for 2 mol% Li⁺-added which results from distortion both rhombohedral and tetragonal phase structures. The band gap reduced from 2.88 to 2.68 eV and the saturation polarization decreased from 46.2 to 26.1 μC/cm² when Li⁺ ions concentration increased from 0 to 5 mol% respectively. We expect that this work could be helpful for further understanding the role of A-site dopants in comparison with B-site modification in lead-free Bi_0.5(Na,K)_0.5TiO₃-based ceramics.     

Effect of Li-substitution on piezoelectric and ferroelectric properties of (Bi0.92Na0.92−xLix)0.5Ba0.06Sr0.02TiO3 lead-free ceramics

New lead-free ceramics (Bi_0.92Na_0.92−xLi_x)_0.5Ba_0.06Sr_0.02TiO₃ have been fabricated by a conventional ceramic technique and their electrical properties have been studied. X-ray diffraction studies reveal that Li⁺, Ba²⁺ and Sr²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure. The partial substitution of Li⁺ for Na⁺ increases the remanent polarization P_r of the ceramics. Because of the large P_r and low coercive field E_c, the ceramics with x = 0.075–0.125 exhibit excellent piezoelectric properties: d₃₃ = 189–235 pC/N, k_p = 33.6–36.3% and k_t = 51.6–54.3%. The ceramics exhibit relaxor behaviors after the substitution of Li⁺ for Na⁺. Our results also suggest that polar and non-polar phases may coexist in the ceramics at temperatures above the depolarization temperature T_d.     

Electronic structure and fundamental absorption edges of KPb2Br5, K0.5Rb0.5Pb2Br5, and RbPb2Br5 single crystals

X-ray photoelectron core-level and valence-band spectra for pristine and Ar⁺-ion irradiated (001) surfaces of KPb₂Br₅, K_0.5Rb_0.5Pb₂Br₅, and RbPb₂Br₅ single crystals grown by the Bridgman method have been measured and fundamental absorption edges of the ternary bromides have been recorded in the polarized light at 300 K and 80 K. The present X-ray photoelectron spectroscopy (XPS) results reveal high chemical stability of (001) surfaces of K_xRb_1?xPb₂Br₅ (x=0, 0.5, and 1.0) single crystals. Substitution of potassium for rubidium in K_xRb_1?xPb₂Br₅ does not cause any changes of binding energy values and shapes of the XPS constituent element core-level spectra. Measurements of the fundamental absorption edges indicate that band gap energy, E_g, increases by about 0.14 and 0.19 eV when temperature decreases from 300 K to 80 K in KPb₂Br₅ and RbPb₂Br₅, respectively. Furthermore, there is no dependence of the E_g value for KPb₂Br₅ upon the light polarization, whilst the band gap energy value for RbPb₂Br₅ is bigger by 0.03–0.05 eV in the case of E6c compared to those in the cases of E6a and E6b.     

Dielectric properties and study of AC electrical conduction mechanisms by non-overlapping small polaron tunneling model in Bis(4-acetylanilinium) tetrachlorocuprate(II) compound

In the present work, the synthesis and characterization of the Bis(4-acetylanilinium) tetrachlorocuprate(II) compound are presented. The structure of this compound is analyzed by X-ray diffraction which confirms the formation of single phase and is in good agreement the literature. Indeed, the Thermo gravimetric Analysis (TGA) shows that the decomposition of the compound is observed in the range of 420–520 K. However, the differential thermal analysis (DTA) indicates the presence of a phase transition at T=363 k. Furthermore, the dielectric properties and AC conductivity were studied over a temperature range (338–413 K) and frequency range (200 Hz–5 MHz) using complex impedance spectroscopy. Dielectric measurements confirmed such thermal analyses by exhibiting the presence of an anomaly in the temperature range of 358–373 K. The complex impedance plots are analyzed by an electrical equivalent circuit consisting of resistance, constant phase element (CPE) and capacitance. The activation energy values of two distinct regions are obtained from log σT vs 1000/T plot and are found to be E=1.27 eV (T<363 K) and E=1.09 eV (363 K<T).The frequency dependence of ac conductivity, σ_ac, has been analyzed by Jonscher's universal power law σ(ω)=σ_dc+Aω^s. The value of s is to be temperature-dependent, which has a tendency to increase with temperature and the non-overlapping small polaron tunneling (NSPT) model is the most applicable conduction mechanism in the title compound.     

Synthesis,crystal structure,spectroscopic characterization and optical properties of bis(4-acetylanilinium) tetrachlorocobalt (II)

The chemical preparation, crystal structure, spectroscopic investigations and optical features are given for a novel organic–inorganic hybrid material [C₈H₁₀NO]₂CoCl₄.The compound is crystallized in the orthorhombic space group Cmca, with the following unit cell parameters: a=19.461(2) Å, b=15.523(2) Å, c=13.7436(15) Å, and Z=8. The atomic arrangement shows an alternation of organic and inorganic layers along the b-axis. The cohesion between these entities is performed by N–H…Cl and N–H…O hydrogen bonds and π–π stacking interactions.Infrared and Raman spectra at room temperature are recorded in the 4000−400 and 4000−0 cm⁻¹ frequency regions, respectively and analyzed on the basis of literature data. This study confirms the presence of the organic cation [C₈H₁₀NO]⁺ and of the [CoCl₄]²⁻ anion. UV–vis spectroscopy results showed the indirect transition with band gap energy 2.98 eV.     

Photolysis of SF6 adsorbed on Si(111)-7 × 7 by monochromatic soft X-ray

Continuous-time photoelectron spectroscopy (PES) and photon-exposure-dependent photon-stimulated desorption (PSD) were employed to investigate the monochromatic soft X-ray-induced dissociation of SF₆ molecules adsorbed on Si(111)-7 × 7 at 30 K (SF₆ dose = 3.4 × 10¹³ molecules/cm², ～ 0.5 monolayer). The photon-induced evolution of adsorbed SF₆ was monitored at photon energies of 98 and 120 eV [near the Si(2p) edge], and sequential valence-level PES spectra made it possible to deduce the photolysis cross section as a function of energy. It was found that the photolysis cross sections for 98 and 120 eV photons are ～ 2.7 × 10^? 17 and ～ 3.7 × 10^?17 cm², respectively. The changes in the F^? and F⁺ PSD ion yields were also measured during irradiation of 120 eV photons. The photon-exposure dependencies of the F^? and F⁺ ion yields show the characteristics: (a) the dissociation of adsorbed SF₆ molecules is ascribable to the substrate-mediated dissociations [dissociative attachment (DA) and dipolar dissociation (DD) induced by the photoelectrons emitting from the silicon substrate]; (b) at early stages of photolysis, the F^? yield is mainly due to DA and DD of the adsorbed SF₆ molecules, while at high photon exposure the F^? formation by electron capture of the F⁺ ion is likely to be the dominant mechanism; (c) the F⁺ ion desorption is associated with the bond breaking of the surface SiF species; (d) the surface SiF is formed by reaction of the surface Si atom with the fluorine atom or F^? ion produced by scission of S–F bond of SF_n (n = 1–6) species.     

Kinetics for the reactions of phenyl with methanol and ethanol: Comparison of theory and experiment

The kinetics of the C₆H₅ reactions with CH₃OH and C₂H₅OH has been measured by pulsed-laser photolysis/mass-spectrometry (PLP/MS) employing acetophenone as the radical source. Kinetic modeling of the benzene formed in the reactions over the temperature range 306–771 K allows us to reliably determine the total rate constants for H-abstraction reactions. In order to improve our low temperature measurements down to 304 K we have also applied the cavity ring-down spectrometric technique using nitrosobenzene as the radical source. Both sets of data agree closely. A weighted least-squares analysis of the two complementary sets of data for the two reactions gave the total rate constants k(CH₃OH) = (7.82 ± 0.44) × 10¹¹ exp [?(853 ± 30)/T] and k(C₂H₅OH) = (5.73 ± 0.58) × 10¹¹ exp [?(1103 ± 44)/T] cm³ mol^?1 s^?1 for the temperature range studied. Theoretically, four possible product channels of the C₆H₅ + CH₃OH reaction producing C₆H₆ + CH₃O, C₆H₆ + CH₂OH, C₆H₅OH + CH₃ and C₆H₅OCH₃ + H and five possible product channels of the C₆H₅ + C₂H₅OH reaction producing C₆H₆ + C₂H₅O, C₆H₆ + CH₂CH₂OH, C₆H₆ + CH₃CHOH, C₆H₅OH + CH₃CH₂ and C₆H₅OCH₂CH₃ + H have been computed at the G2M//B3LYP/6?311+G(d, p) level of theory. The hydrogen abstraction channels were predicted to have lower energy barriers than those for the substitution reactions and their rate constants were calculated by the microcanonical variational transition state theory at 200–3000 K. The predicted rate constants are in good agreement with the experimental values. Significantly, the rate constant for the CH₃OH reaction with C₆H₅ was found to be greater than that for the C₂H₅OH reaction and both reactions were found computationally to be dominated by H-abstraction from the hydroxyl group attributable to the affinity of the phenyl toward the OH group and the predicted lower energy barriers for the OH attack.     

Comparative study of large-solid-core photonic crystal fibers: Dispersion and effective mode area

In this study, large-solid-core photonic crystal fibers with fixed air-hole diameter d = 0.84 μm and with fixed pitch length Λ = 4.2 μm are investigated for different d/Λ ratios. The dispersions and the effective mode-areas are obtained and compared for both the structures. It is seen that the dispersion management is easier by using the fixed d structures, but for working around the same zero dispersion points in a large interval of d/Λ the fixed Λ structures are more available. The A_eff values larger than 100 μm² are obtained with d/Λ smaller than 0.2 for both the two structures. A_eff increases rapidly with decreasing d/Λ to 0.1 and then reaches to A_eff value of 500 μm² at the d/Λ = 0.1 for the fixed d structures. The single-mode regime for the two structures is also discussed.