Stereoselectivity in the Diels‐Alder Cycloadditions of a Facially Dissymmetric Bicyclo[2.2.2]octadiene‐Grafted Maleic Anhydride with Exocyclic Butadienes. Unexpected Facial Selectivity in the Cycloaddition with 2,3,5,6‐tetramethylidenebicyclo[2.2.2]octene

The Diels‐Alder cycloadditions of facially dissymmetric maleic anhydride 1 with facially nonequivalent exocyclic 1,3‐butadienes(dimethylidenebicyclo[2.2.2]octene 3 and 2,3,5,6‐tetramethylidenebicyclo[2.2.2]‐octene ( 4 )) were investigated. In each cycloaddition, the reaction occurred via the course in which 1 added exclusively by its syn‐face (same face as the etheno‐bridge) onto either π‐face of the exocyclic 1,3‐butadiene systems to produce only two of the four possible stereoisomeric monocycloadducts ( 8a / 8b and 9a / 9b ). In the Diels‐Alder cycloaddition of 1 with bis‐exocyclic butadiene 4 , however, both monocycloadducts 9a and 9b underwent subsequent cycloaddition with distinctive facial selectivity to produce the C_s‐symmetric bis‐cyclohexanobarrelene 10a as only bis‐cycloadduct.     

Microwave‐Assisted Facile Synthesis and Crystal Structure of cis‐9,10,11,15‐Tetrahydro‐9,10[3′,4′]‐furanoanthracene‐12,14‐dione

A facile synthesis and crystal structure of cis‐9,10,11,15‐tetrahydro‐9,10[3′,4′]‐furanoanthracene‐12,14‐dione from the reaction of anthracene and maleic anhydride in xylene in a short time and high yield using a modified commercial domestic microwave oven is reported.     

Synthesis of Trichlorophenol Derivatives

An expedient three‐step procedure for the synthesis of trichlorophenol derivatives based on the acid‐catalyzed rearrangement of the bicyclic ketone precursors 6a–e in high overall yield is described. The bicyclic ketone precursors 6a–e were obtained from Diels–Alder cycloadducts of β‐substituted vinyl acetates with tetrachloro‐5,5‐dimethoxycyclopentadiene in two steps.     

2,5-二甲基噻吩硫氧化物与C60的Diels-Alder反应研究

通过2,5-二甲基噻吩硫单氧化物(亚砜)和2,5-二甲基噻吩硫二氧化物(砜)与C60的Diels-Alder环加成反应,分离获得了稳定加成产物。     

A Complete Guide on the Influence of Metal Clusters in the Diels–Alder Regioselectivity of Ih‐C80 Endohedral Metallofullerenes

The chemical functionalization of endohedral metallofullerenes (EMFs) has aroused considerable interest due to the possibility of synthesizing new species with potential applications in materials science and medicine. Experimental and theoretical studies on the reactivity of endohedral metallofullerenes are scarce. To improve our understanding of the endohedral metallofullerene reactivity, we have systematically studied with DFT methods the Diels–Alder cycloaddition between s‐cis‐1,3‐butadiene and practically all X@I_h‐C₈₀ EMFs synthesized to date: X=Sc₃N, Lu₃N, Y₃N, La₂, Y₃, Sc₃C₂, Sc₄C₂, Sc₃CH, Sc₃NC, Sc₄O₂ and Sc₄O₃. We have studied both the thermodynamic and kinetic regioselectivity, taking into account the free rotation of the metallic cluster inside the fullerene. This systematic study has been made possible through the use of the frozen cage model (FCM), a computationally cheap approach to accurately predicting the exohedral regioselectivity of cycloaddition reactions in EMFs. Our results show that the EMFs are less reactive than the hollow I_h‐C₈₀ cage. Except for the Y₃ cluster, the additions occur predominantly at the [5,6] bond. In many cases, however, a mixture of the two possible regioisomers is predicted. In general, [6,6] addition is favored in EMFs that have a larger charge transfer from the metal cluster to the cage or a voluminous metal cluster inside. The present guide represents the first complete and exhaustive investigation of the reactivity of I_h‐C₈₀‐based EMFs.     

Dendron–polymer conjugates via the diels–alder “click” reaction of novel anthracene‐based dendrons

Diblock and triblock dendron–polymer conjugates containing biodegradable polyester dendron blocks and polyethylene glycol (PEG) polymer were synthesized using the Diels–Alder “click” cycloaddition reaction. PEG polymers with furan‐protected maleimide functionality were synthesized and reacted with biodegradable polyester dendrons containing an anthracene moiety at their focal point. First through third generations of biodegradable polyester dendrons containing an anthracene unit at their focal point were synthesized using a divergent strategy. Efficient conjugation of the dendrons to polymers was demonstrated using ¹HNMR and size exclusion chromatography. This modular approach provides an easy access to the design of multivalent PEG conjugates. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3191–3201     

Combining Photodeprotection and Ligation into a Dual-Color Gated Reaction System

We report a photochemical reaction system which requires activation by two colors of light. Specifically, a dual wavelength gated system is established by fusing the visible light mediated deprotection of a dithioacetal with the UV light activated Diels–Alder reaction of an o-methylbenzaldehyde with N -ethylmaleimide. Critically, both light sources are required to achieve the Diels–Alder adduct, irradiation with visible or UV light alone does not lead to the target product. The introduced dual gated photochemical system is particularly interesting for application in light driven 3D printing, where two color wavelength activated photoresists may become reality.     

Hetero Diels–Alder Cycloaddition of Indene for the Formal Synthesis of Onychnine

A highly regio‐ and stereoselective hetero Diels–Alder cycloaddition of indene with N‐sulfonyl‐1‐aza‐1,3‐butadiene was achieved. Subsequent transformation of the 5H‐indeno [l,2‐b]pyridine via elimination and reduction provides a new route to azafluorenone (e.g., 1‐methyl‐4‐azafluorene) for the synthesis of onychnine.     

Diverse Reactivity of Dienes with Pentaphenylborole and 1-Phenyl-2,3,4,5-Tetramethylborole Dimer

The reactions of a monomeric borole and a dimeric borole with 2,3-dimethyl-1,3-butadiene and 1,3-cyclohexadiene were investigated. The monomeric borole reacted at ambient temperature whereas heat was required to crack the dimer to form the monomer and induce reactivity. 2,3-Dimethyl-1,3-butadiene reacts to give diverse products resulting from a cycloaddition process with the B−C moiety of the boroles acting as a dienophile, followed by rearrangements to furnish bicyclic species. For 1,3-cyclohexadiene, a [4+2] process is observed in which 1,3-cyclohexadiene serves as the dienophile and the boroles as the diene partner. The experimental results are corroborated with mechanistic theoretical calculations that indicate boroles can serve as either a diene or dienophile in cycloaddition reactions with dienes.     

Synthesis of chalcone‐based fluorescent polymers: Diels‐Alder reaction of chalcones and their polymerization through ROMP

Ring opening metathesis polymerization (ROMP) was carried out on Diels‐Alder adducts formed from reactions between chalcones and cyclopentadiene. Most of the chalcones gave predominantly endo‐adducts and the exo‐adducts were obtained in good yields from reacting cyclopentadiene with furfurylidine acetone and N,N,diethylaminobenzylidine‐(4‐hydroxy)acetophenone. These exo‐adducts were subjected to ROMP using Grubbs catalyst, bis(tricyclohexylphosphine)benzylidinedichloride. The monomers and polymers were characterized using spectroscopic techniques like FT‐IR, ¹HNMR. The polymers were characterized using TGA, DSC, and GPC. The polymers were found to possess fluorescent properties and poly[2‐(4‐diethylamino)phenyl‐3,5‐divinylcyclopentyl](4‐hydroxyphenyl) methanone was found to have good emissive property at two wavelengths. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1521–1531, 2008     

Assembly of the 6/3/5/6 tetracyclic core of rearranged-type C19-diterpenoid alkaloids

A synthetic study toward the structurally complex rearranged-type C₁₉-diterpenoid alkaloids leading to construction of the strained 6/3/5/6 tetracyclic core is presented. The synthesis features an intramolecular Diels–Alder cycloaddition reaction to assemble the highly substituted central cyclopropane motif, which may serve as a key strategy for the total synthesis of relevant natural product molecules.     

Synthesis of Cyclopentadienyl Capped Polyethylene and Subsequent Block Copolymer Formation Via Hetero Diels‐Alder (HDA) Chemistry

In the current contribution it is demonstrated – for the first time – that poly(ethylene) ( = 1 400 as well as 2 800 g · mol⁻¹, PDI = 1.2) can be readily equipped with highly reactive cyclopentadienyl (Cp) end groups. The Cp terminal poly(ethylene) can subsequently be reacted in an efficient hetero Diels‐Alder (HDA) reaction with macromolecules (poly(isobornyl acrylate) ( = 4 600 g · mol⁻¹, PDI = 1.10) and poly(styrene) ( = 6 300 g · mol⁻¹, PDI = 1.13) featuring strongly electron withdrawing thiocarbonyl thio end groups, prepared via reversible addition fragmentation chain transfer (RAFT) polymerization employing benzylpyridin‐2‐yldithioformate (BPDF) as transfer agent. The resulting block copolymers have been analyzed via high‐temperature size exclusion chromatography (SEC) as well as nuclear magnetic resonance (NMR) spectroscopy. The current system allows for the removal of the excess of the non‐poly(ethylene) containing segment via filtration of the poly(ethylene)‐containing block copolymer. However, the reaction temperatures need to be judiciously selected. Characterization of the generated block copolymers at elevated temperatures can lead – depending on the block copolymer type – to the occurrence of retro Diels‐Alder processes. The present study thus demonstrates that RAFT‐HDA ligation can be effectively employed for the generation of block copolymers containing poly(ethylene) segments.

     

Enantiodivergent [4+2] Cycloaddition of Dienolates by Polyfunctional Lewis Acid/Zwitterion Catalysis

Diels–Alder reactions have become established as one of the most effective ways to prepare stereochemically complex six-membered rings. Different catalysis concepts have been reported, including dienophile activation by Lewis acids or H-bond donors and diene activation by bases. Herein we report a new concept, in which an acidic prodiene is acidified by a Lewis acid to facilitate deprotonation by an imidazolium–aryloxide entity within a polyfunctional catalyst. A metal dienolate is thus formed, while an imidazolium–ArOH moiety probably forms hydrogen bonds with the dienophile. The catalyst type, readily prepared in few steps in high overall yield, was applied to 3-hydroxy-2-pyrone and 3-hydroxy-2-pyridone as well as cyclopentenone prodienes. Maleimide, maleic anhydride, and nitroolefin dienophiles were employed. Kinetic, spectroscopic, and control experiments support a cooperative mode of action. High enantioselectivity was observed even with unprecedented TONs of up to 3680.     

Enantioselective Redox-Divergent Chiral Phosphoric Acid Catalyzed Quinone Diels–Alder Reactions

An efficient enantioselective construction of tetrahydronaphthalene-1,4-diones as well as dihydronaphthalene-1,4-diols by a chiral phosphoric acid catalyzed quinone Diels–Alder reaction with dienecarbamates is reported. The nature of the protecting group on the diene is key to the success of achieving high enantioselectivity. The divergent “redox” selectivity is controlled by using an adequate amount of quinones. Reversible redox switching without erosion of enantioselectivity was possible from individual redox isomers.