高盐油藏下两性/阴离子表面活性剂协同获得油水超低界面张力

研究了在高盐油藏中, 利用两性/阴离子表面活性剂的协同效应获得油水超低界面张力的方法. 两性表面活性剂十六烷基磺基甜菜碱与高盐矿化水具有很好的相容性, 但在表面活性剂浓度为0.07%-0.39%(质量分数)范围内仅能使油水界面张力达到10^-2 mN·m^-1量级, 加入阴离子表面活性剂十二烷基硫酸钠后则可与原油达到超低界面张力. 通过探讨表面活性剂总浓度、金属离子浓度、复配比例对油水动态界面张力的影响, 发现两性/阴离子表面活性剂混合体系可以在高矿化度、低浓度和0.04%-0.37%的宽浓度范围下获得10^-5 mN·m^-1量级的超低界面张力, 并分析了两性/阴离子表面活性剂间协同获得超低界面张力的机制.     

Interfacial dilational properties of anionic gemini surfactants with polymethylene spacers

The dilational properties of anionic gemini surfactants alkanediyl-α,ω-bis(m-octylphenoxy sulfonate) (C₈C_mC₈) with polymethylene spacers at the water–air and water–decane interfaces were investigated by oscillating barriers and interfacial tension relaxation methods. The influences of oscillating frequency and bulk concentration on the dilational properties were explored. The experimental results show that the linking spacer plays an important role in the interfacial dilational properties. The moduli pass through one maximum for all three gemini surfactants at both water–air and water–decane interfaces. However, the values of moduli at the water–air interface are obviously higher than those at the water–decane interface because the sublayer formed by spacer chains will be destroyed by the insertion of oil molecules. Moreover, with the increase of spacer length, the surface adsorption film becomes more viscous at high concentration, which can be attributed to the process involving the formation of the sublayer. On the other hand, the spacers of the adsorbed C₈C₆C₈ molecules will extend into the oil phase when the interface is compressed. As a result, the interfacial film becomes more elastic with the increase of spacer length at high concentration. The experimental results obtained by the interfacial tension relaxation measurements are in accord with those obtained by the oscillating barriers method.     

Molecular dynamics simulation of four typical surfactants at oil/water interface

In the present study, we have performed molecular dynamics simulations to describe the microscopic behaviors of the anionic, nonionic, zwitterion, and gemini surfactants at oil/water interface. The abilities of reducing the interfacial tension and forming the stable interfacial film of the four surfactants have been investigated through evaluating interfacial thickness, interface formation energy and radial distribution function. The results show that the four kinds of surfactants can form in stable oil/water interface of monolayer, and the gemini surfactant can form the more stable monolayer. The results of the above three parameters demonstrate that the gemini surfactant has the best simulation effect in the four surfactants. From the calculated interfacial tension values, the gemini surfactant possess the more powerful ability of reducing the interfacial tension than others, so it is more suitable to be used as the surfactant for flooding. In addition, the effects of different electric field intensities on surfactants were calculated, through the radial distribution function of the hydrophilic group in the surfactant and the oxygen atom in the water. We have found that the adding of the periodic electric field can significantly affect the diffusion behavior of the molecules, and nonionic surfactant has stronger demulsification capability than others.     

Effect of Polymer on Dynamic Interfacial Tensions of Anionic–nonionic Surfactant Solutions

The dynamic interfacial tensions (IFTs) of enhanced oil recovery (EOR) surfactant/polymer systems against n-decane have been investigated using a spinning drop interfacial tensiometer in this paper. Two anionic–nonionic surfactants with different hydrophilic groups, C₈PO₆EO₃S (6-3) and C₈PO₆EO₆S (6-6), were selected as model surfactants. Partially hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM) were employed. The influences of surfactant concentration, temperature, polymer concentration, and oleic acid in the oil on IFTs have been studied. The experimental results show that anionic–nonionic surfactants can form compact adsorption films and reach ultralow IFT (10^?3 mN/m) under optimum conditions. The addition of polymer has great influence on dynamic IFTs between surfactant solutions and n-decane mainly by the formation of looser mixed films resulting from the penetration of polymer chains into the interface. The compact surfactant film will also be weakened by the competitive adsorption of oleic acid, which results in the increase of IFT. Moreover, the penetration of polymer chains will be further destroyed surfactant/polymer mixed layer and lead to the obvious increase of IFT. On the other hand, polymers show little effect on the IFTs of 6-6 systems than those of 6-3 because of the hindrance of longer EO chain of 6-6 at the interface.     

Synthesis and Performance of Novel Sulfonate Gemini Surfactant with Trialkyl Chains

A new type of sulfonate gemini surfactant with three lipophilic alkyl chains (3C₁₀-DS) was synthesized, and the structure of the product was confirmed by using the infrared spectrum and mass spectrum. Its critical micelle concentration (CMC) is 0.41 mmol/L, one order of magnitude lower than those of convectional (single-chain) surfactants, and the minimum surface tension is 27.6 mN/m. The interfacial tension (IFT) between the compound system of 3C₁₀-DS and petroleum sulfonate (PS) and the simulated oil reaches ultra-low levels (10^?3 mN/m), and there exists significant synergistic effect between 3C₁₀-DS and PS. The compound flooding system consisting of polymer and the mixture of 3C₁₀-DS and PS can effectively improve oil recovery for high-medium permeability cores and have a good application prospect in enhancing oil recovery.     

Effect of Alkyl Chain Length on the Interfacial Dilational Properties of Hydroxy-Substituted Alkyl Benzenesulfonates

Dilational rheological behaviors of adsorption layers of three surfactants, sodium 2-hydroxy-3,5-dioctyl benzene sulfonate (C₈C₈), sodium 2-hydroxy-3-octyl-5-decyl benzene sulfonate (C₈C₁₀), and sodium 2-hydroxy-3-octyl-5-dodecylbenzenesulfonate (C₈C₁₂) formed at air–water and decane–water interfaces, have been investigated as a function of concentration and frequency (0.002–0.1 Hz) by the oscillating bubble/drop method. The experimental results show that the dilational moduli of hydroxy-substituted alkyl benzenesulfonates are obviously higher than those of the common surfactants, because the interfacial interactions between alkyl chains are improved drastically by the unique arrangement of C₈C₈ molecules at the interface. However, the moduli at the decane–water interface are much lower than those at the surfaces because decane molecules will insert into the surfactant molecules adsorbed at the interface and destroy the interactions between alkyl chains. With an increase in the number of carbon atom of 5-alkyl, the surface dilational modulus decreases because the orientation of the surfactant molecules at the surface varies from parallel to tilt. On the other hand, the diffusion-exchange process dominates the interfacial behavior and the interfacial modulus improves with the increase in the length of the alkyl chain.     

Interfacial Dilational Properties of Hydrophobically Modified Partly Hydrolyzed Polyacrylamide and Anionic Surfactants at the Water-Decane Interface

The dilational viscoelastic properties of hydrophobically modified partly hydrolyzed polyacrylamide and anionic surfactants (4,5-diheptyl-2-propylbenzene sulfonate and gemini surfactant C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte have been investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. Experimental results show that at low surfactant concentration, the increase of the dilational modulus by the addition of surfactant molecules at low frequency might be explained by the mix-adsorption of the polymer chains and surfactant molecules. At the same time, polymer chain could sharply decrease the dilational modulus of surfactant film mainly due to the weakening of the strong interactions among long alkyl chains in surfactant molecules. At high surfactant concentration, the addition of surfactant molecules can decrease the dilational modulus of polymer solution due to the fast process involving in the exchange of surfactant molecules between the interface and the mixed complex formed by surfactant molecules and hydrophobic micro-domains. The added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally increases the frequency dependence of the interfacial dilational modulus. The data obtained on the relaxation processes via interfacial tension relaxation measurements can explain the results from oscillating barriers measurements very well.     

The ultralow interfacial tensions between crude oils and gemini surfactant solutions

In this paper, the interfacial tension between crude oil and solution of cationic gemini surfactant has been studied. It is found that the interfacial tension between crude oil and water is closely related to the nature of a gemini surfactant and oil; meanwhile, in the case without additives, some gemini surfactants or mixtures of some gemini surfactants can reduce the interfacial tension between crude oil and water to an ultralow value.     

Synthesis of a new sulfobetaine surfactant with double long alkyl chains and its performances in surfactant-polymer flooding

A new zwitterionic surfactant with double long alkyl chains, 3-((3-((1,3-bis (decyloxyl) propane-2-yl) oxy) -2-hydroxypropyl) dimethylamonio) -2-hydroxypropane-1-sulfonate (diC₁₀GE-HSB), was synthesized, and its performances in Surfactant-Polymer (SP) flooding were studied. As a hydrophobic surfactant diC₁₀GE-HSB solely cannot reduce Daqing crude oil/connate water IFT to ultralow, but ultralow IFT can be achieved by using binary mixtures of diC₁₀GE-HSB with various conventional hydrophilic surfactants such as α–olefin sulfonates, dodecyl polyoxyethylene (10) ether, and cetyl dimethyl hydroxypropyl sulfobetaine, over a wide total concentration range (0.625?～?10?mM) at reservoir temperature. This new sulfobetaine surfactant is therefore a good candidate for SP flooding free of alkali.     

Interfacial activity of a novel family of polymeric surfactants

A novel series of polymeric surfactants based on carboxy methyl cellulose and alkyl poly(etheroxy) acrylate were synthesized by ultrasonic irradiation. These polymeric surfactants have exhibit excellent surface activity due to their unique structure. The influences of salt, alcohol and alkali on the interfacial activity of these polymeric surfactants were studied by interfacial tensiometery, dynamic laser scattering (DLS), UV spectroscope and environmental scanning electrical microscope (ESEM). The surface tension and interfacial tension (IFT) properties change little with NaCl added. The formed micelles shrink, their size becomes smaller. Alcohols cause the IFT to decrease a little because a small amount of free chains present in solution. Under the influence of added alkali, the IFT of the polymeric surfactants, in aqueous solution, decreases so much that sometimes it is less than 10⁻² mN/m. Using data from the equivalent alkane scan, one cannot draw the conclusion that the action of alkali with the acidic components in crude oil leads to the ultra-low IFT. The analyses by UV, DLS and ESEM show that the micelles formed by polymeric surfactants could be disaggregated or destroyed sharply by the action of alkali. So the size of micelles decreases greatly and the number of free chains increases. That more polymeric surfactants molecules move to the interface of oil/water and rearrange at the interface of oil/water is believed to be the main reason of the ultra-low IFT (10⁻³ mN/m) that is obtained.     

Effect of Cationic and Zwitterionic Surfactants on Contact Angle of Quartz–Water–Crude Oil System

The influences of four cationic surfactants hexadecyl glycidyl ether ammonium chloride and four zwitterionic surfactants hexadecyl glycidyl ether glycine Betaine solutions on contact angle of crude oil on a quartz surface were investigated using a captive drop method. The effects of surfactant type, structure, and concentration on contact angle were expounded. From obtained results it appears that the adsorbed surfactant at oil–water interface reduces the interfacial tension and the adsorption at quartz–water interface improves interfacial free energy, which results in reducing the stable value of contact angle and weakening dynamic behavior. At high concentration, the zwitterionic surfactant with branched-chain may form semi-micelle at quartz surface. As a result, the stable value of contact angle passes through a sharp minimum with the increasing concentration.     

CMC系列高分子表面活性剂与原油超低界面张力形成机理的研究

采用动态激光光散射及环境扫描电镜研究了羧甲基纤维素系列高分子表面活性剂与大庆原油形成超低界面张力的机理.结果表明,CMC系列高分子表面活性剂具有与低分子量表面活性剂相比拟的表/界面活性,其水溶液的表面张力可达2835mN/m,界面张力达到10^-110mN/m.碱的加入可显著降低高分子表面活性剂与原油的界面张力,在适当条件下界面张力达到超低值(10^-3mN/m),可望作为三次采油的驱油剂.等效烷烃模型研究表明,用碱与原油酸性组分的作用来解释碱能使界面张力下降至超低值的传统观点是不完善的,加入碱能使高分子表面活性剂胶束解缔,胶束数量增多,胶束粒径减小,单分子自由链增加,有利于高分子表面活性剂向界面迁移和排布,这是高分子表面活性剂和碱复配体系与原油界面张力下降至超低值的主要原因.     

Synthesis and properties of nonylphenol-substituted dodecyl sulfonate

Nonylphenol-substituted dodecyl sulfonate (C₁₂-NPAS) was synthesized via sulfonation-alkylation-neutralization using 1-dodecene, SO₃, and nonylphenol as raw materials. The properties such as surface tension, interfacial tension (IFT), wettability, foam properties, and salinity tolerance of C₁₂-NPAS were systematically investigated. The results show that the critical micelle concentration (CMC) of C₁₂-NPAS was 0.22?mmol?·?L^?1 and the surface tension at the CMC (γ_CMC) of C₁₂-NPAS was 29.4 mN/m. When compared with the traditional surfactants sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), and linear alkylbenzene sulfonate (LAS), the surface properties of C₁₂-NPAS were found to be superior. The IFT between Daqing crude oil and a weak-base alkaline/surfactant/polymer (ASP) oil flooding system containing 0.1?wt% of C₁₂-NPAS can reach an ultralow level of 2.79?×?10^?3 mN/m, which was lower than that found for the traditional surfactant heavy alkylbenzene sulfonate (HABS). The salinity and hardness tolerance of C₁₂-NPAS were much stronger than those found for conventional surfactants, petroleum sulfonate, and LAS. C₁₂-NPAS also shows improved wetting performance, foamability, and foam stability.     

多元体系油水界面上常见表面活性剂行为的分子动力学模拟

采用分子动力学模拟研究了以十二烷基苯磺酸钠(SDBS)为代表的阴离子型表面活性剂,以十二烷基三甲基溴化铵(DTAB)为代表的阳离子型表面活性剂,以壬基酚聚氧乙烯醚(NPE)为代表的非离子型表面活性剂,以十二烷基二甲基甜菜碱(Betaine)为代表的两性表面活性剂及空白实验.模拟了表面活性剂在油水界面上的行为,考察了表面活性剂分子与石油分子之间的径向分布函数(RDF)、石油分子在竖直方向的均方位移(MSD)、油水界面张力(IFT)、石油层与岩石层之间的相互作用能、石油层的相对浓度在竖直方向的分布及石油分子质心位置随模拟时间的变化关系等,讨论了不同表面活性剂的洗油性能.结果表明:(1)SDBS,NPE和Betaine分子初始状态下呈近似的规律排列,非极性端部分插入油相中,极性端延伸进入水相中;随后表面活性剂的极性端表现出聚集趋势,逐渐形成一个外部亲油内部亲水的一个胶束状粒子,粒子随模拟的进行逐渐融入到油层当中;DTAB从开始的近似规则排列逐渐变为无规排列,但是始终保持亲油端插入到油相中,亲水端位于油水界面上.(2)表面活性剂分子与石油分子之间的相互作用强弱顺序为Betaine≈DTABSDBSNPE.(3)由质心高度和动力过程中的图像截图分析,表面活性剂洗油效果的顺序为BetaineSDBSNPEDTABNone.模拟结果与实际的驱油结果一致,从分子层面上解释了不同表面活性剂洗油的规律.     

Interfacial tension of alkylglucosides in different APG/oil/water systems

The interfacial performance of pure alkylglucosides (C₈G₁, C₁₀G₁ and C₁₂G₁) and of technical grade alkylpolyglucoside (APG) surfactants was investigated in three different water/oil systems (decane, isopropylmyristate and 2-octyldodecanol). From the dependence of the interfacial tension on the surfactant concentration below the CMC the cross-sectional area of the molecules at the decane/water interface was estimated. The plateau values of the interfacial tension at the CMC _c are independent of temperature and almost independent of added electrolyte in the decane/water system. The ability of the surfactants to lower the oil/water interfacial tension is most pronounced for the nonpolar oil. The partition coefficient of the surfactant between oil and water phase (k _c) was estimated from the CMC and the observed break point of the interfacial tension after equilibration of the two phases. In decane/water,k _c is nearly zero for all surfactants studied. For the polar oils,k _c increases with the chain length of the surfactant up tok _c10 for C₁₂G₁ in octyldodecanol/water. The values of _c in the different oil/water systems appear to be correlated withk _c and exhibit a minimum neark _c=1.     

Synthesis and aqueous solution properties of homologous gemini surfactants with different head groups

A series of homologous gemini surfactants possessing identical hydrophobic chains but different ionic head groups (cationic, anionic, zwitterionic) were synthesized, and their aqueous solution properties were examined. The results showed that the surface activities of gemini surfactants are superior to those of corresponding conventional monomeric surfactants, and molecular arrangements of gemini surfactants at the air-water interface are tighter than those of corresponding conventional surfactants. It was also found that zwitterionic gemini surfactant possesses the highest surface activity among the three surfactants. The behavior at the air-water interface is closely related to the molecular structural features of surfactants, which provide an indication for synthesizing highly-efficient surfactants.      

Interactions between synthetic and indigenous naphthenic acids and divalent cations across oil–water interfaces: effects of addition of oil-soluble non-ionic surfactants

Interactions between naphthenic acids and divalent metal cations across model oil–alkaline water interfaces were investigated by correlating changes in dynamic interfacial tension (IFT), to plausible reaction mechanisms. The measurements were carried out by using a CAM 200 optical instrument, which is based on the pendant drop technique. The naphthenic acids used were synthesised model compounds as well as commercial acid mixtures from crude distillation and extracted acid fractions from a North Sea crude oil. The divalent cations involved Ca²⁺, Mg²⁺, Sr²⁺, and Ba²⁺, which are all common in co-produced formation water and naphthenate deposits. The results show that the dynamic IFT strongly depends on naphthenic acid structure, type of divalent cation, and the concentration of the compounds as well as the pH of the aqueous phase. Introducing divalent cations to systems involving saturated naphthenic acids caused mostly a permanent lowering of the IFT. The decline in IFT is due to electrostatic attraction forces across the interface between the cations in the aqueous phase and the carboxylic-groups at the o/w interface, which cause a higher interfacial density of naphthenic acid monomers. The permanent lowering in IFT is likely due to formation of positively charged monoacid complexes, which possess high interfacial activity. On the other hand, in the case of the aromatic model compounds, the cations affected the IFT differently. This is mainly discussed in light of degree of cation hydration and steric conditions. Various oil-soluble non-ionic surfactant mixtures were also introduced to systems involving a model naphthenic acid and Ca²⁺ in order to investigate how the interfacial competition affected the local interactions. Based on the behaviour of dynamic IFT, probable inhibition mechanisms are discussed.Electronic Supplementary Material Supplementary material is available for this article at     

Effect of Crude Oil Fractions on Interfacial Tensions of Novel Sulfobetaine Solutions

The dynamic interfacial tensions (IFTs) of two novel zwitterionic surfactants with different hydrophobic groups, alkyl sulfobetaine (ASB), and xylyl substituted alkyl sulfobetaine (XSB), against kerosene, crude oil, and model oils containing crude oil fractions, such as resins, asphaltenes, saturates, aromatics, and acidic fractions, have been investigated by a spinning drop interfacial tensiometer. The experimental results show that XSB solutions show higher interfacial activity than ASB against kerosene because of the larger size of the hydrophobic part of the XSB molecule. The petroleum acids have high interfacial activity and can adsorb onto the interface. For ASB solutions, the synergism mixed adsorption of betaine and acid molecules lowers IFT values. On the one hand, the partly displacement of XSB molecules by petroleum acid at the interface results in the increase of IFTs. Therefore, resins, aromatics, and acidic fractions show strong effects on IFTs of betaine solutions. On the other hand, asphaltenes and saturates have little effect on interfacial properties. Moreover, the hydrophilic part of the betaine molecule at the interface may vary its orientation from vertical to flat with aging time. Therefore, the dynamic IFT curves of ASB solutions against model oils show “V” shape for resins, aromatics, and acidic fractions.     

Dilational Viscoelasticity of the Zwitterionic Gemini Surfactants with Polyoxyethylene Spacers at the Interfaces

The dilational viscoelasticity of zwitterionic gemini surfactants C₈E_xNC₁₂ with polyoxyethylene spacers at the water-air and water-decane interfaces were investigated by oscillating barriers method. The experiments were carried out at different concentrations with an accessible frequency range of 0.005 to 0.1 Hz. Interfacial tension relaxation method was employed to obtain dilational parameters in a reasonably broad frequency range. Experimental results show that the values of dilational elasticity and viscosity of C₈E_xNC₁₂ are larger than those of common nonionic surfactants, such as T × 100, and the dilational viscoelasticity at the water-decane is close to that at the water-air interface on the whole_. The results may be attributed to Coulombic attraction, and the possible schematic diagrams of adsorbed molecules with different polyoxyethylene spacers at the water-air and water-decane interfaces are proposed. We also analyzed C₈E_xNC₁₂ from the results of relaxation experiments and Cole-Cole plots.     

界面扩张流变法研究C12mimBr对Gemini12-2-12在空气/水界面聚集行为的影响

采用界面扩张流变技术研究了季铵盐偶联表面活性剂C₁₂-(CH₂)₂-C₁₂·2Br (Gemini12-2-12)及其与离子液体表面活性剂溴化1-十二烷基-3-甲基咪唑(C₁₂mimBr)复配体系的动态界面张力、扩张流变性质和界面弛豫过程等, 探讨了C₁₂mimBr 对C₁₂mimBr/Gemini12-2-12 混合体系界面性质的影响及C₁₂mimBr 对Gemini12-2-12界面聚集行为影响的机制. 结果表明, 随着离子液体表面活性剂的不断引入, 体系界面吸附达到平衡所需的时间逐渐缩短, 扩张模量和相角明显降低, 界面吸附膜由粘弹性膜转变为近似纯弹性膜; 同时, 界面及其附近的弛豫过程也发生显著变化, 慢弛豫过程消失, 快弛豫过程占主导地位, 且离子液体浓度越高, 快弛豫的贡献越大. 这些界面性质的变化主要归因于离子液体表面活性剂C₁₂mimBr参与界面形成及两表面活性剂在界面竞争吸附的结果. 少量离子液体表面活性剂C₁₂mimBr 的加入可以填补疏松的Gemini12-2-12 界面上的空位, 形成混合界面吸附膜. 随着C₁₂mimBr 含量的增加, 嵌入界面的C₁₂mimBr 分子数不断增多, 导致界面上相互缠绕的Gemini12-2-12烷基链“解缠”, 在体相和界面分子扩散交换的过程中“解缠”的Gemini12-2-12分子从界面上解吸回到体相, 与此同时, C₁₂mimBr 分子相对较小的空间位阻及较强的疏水作用促使其优先扩散至界面进而取代Gemini12-2-12分子, 最终界面几乎完全被C₁₂mimBr分子所占据.