Synthesis and mesomorphic properties of benzoxazole derivatives with lateral multifluoro substituents

Fluorinated aromatics is generally chosen as mesogenic cores to design novel liquid crystal compounds. Here, a series of benzoxazole derivatives with laterally multifluorinated biphenyl units, 2-(3′,3-difluoro ?4′-alkoxy-1,1′-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(3)PF(3)Bx), are synthesized and characterized, where methyl and nitro moieties are selected as terminal groups to investigate the effects of different polar substituents on the liquid crystal properties. The compounds nPF(3)PF(3)Bx show enantiotropic mesophases with mesophase ranges of 0–40°C and 0–63°C on heating and cooling for hydrogen-terminated derivatives (nPF(3)PF(3)BH), 43–93°C and 54–123°C for methyl-terminated ones (nPF(3)PF(3)BM), 60–108°C and 74–152°C for nitro terminated ones (nPF(3)PF(3)BN), respectively. They exhibit photoluminescence emission peaks at 390–392 nm and UV–vis absorption bands with maxima at 327–330 nm, respectively. The results reveal that lateral multifluoro substituents lead to a decrease in melting/clearing points, while electron-withdrawing terminal nitro moiety results in increases in both melting point and mesophase range.     

Synthesis and study the liquid crystalline properties of compounds containing benzoxazole core and terminal vinyl group

Terminal vinyl-based benzoxazole liquid crystalline compounds, 2-(3-fluoro-4?-alkoxy-1,1?-biphenyl ?4-yl)-5-(2-propenyloxymethyl)-benzoxazole (nPPF(2)BP), were synthesised and their structures were confirmed by infrared (IR) spectra, proton nuclear magnetic resonance (¹H-NMR) spectra, gas chromatography with electron impact-mass spectrometry (GC/EI-MS), matrix-assisted laser desorption/ionisation-time of flight (MALDI-TOF) mass spectrometry and elemental analysis (EA). The compounds show enantiotropic smectic/nematic phases with mesophase ranges are 71–97 °C and 87–136°C on heating and cooling processes for nPPF(2)BP, respectively. They give low melting points due to lateral fluoro substituent and flexible terminal 2-propenyloxymethyl chain. It is found that the compounds nPPF(2)BP with shorter alkoxy chain (n = 3, 4) exhibit a wide range of nematic mesophase, which is ascribed to enhanced π–π interaction caused by terminal vinyl moiety, whereas further elongation of the terminal alkoxy chain results in supressing nematic phase and increasing smectic mesophase. Compared with methyl terminated analogues, 2-propenyloxymethyl terminated compounds nPPF(2)BP display much lower melting points and wider or comparable mesophase range both in heating and cooling.     

Preparation and characterisation of laterally monofluorinated mesogenic benzimidazole-based compounds

Series of laterally monofluorinated compounds, 2-(4?-alkoxy-3-fluorobiphenyl-4-yl)-1H-benzimidazole derivatives (nPPF(3)Mx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(3)MH, nPPF(3)MM and nPPF(3)MN, respectively) at 5-position, were prepared and their structures were characterised. According to the results from differential scanning calorimetry and polarising optical microscopy, the present compounds nPPF(3)Mx exhibit enantiotropic smectic mesophases, for which the mesophase ranges are 13–67 and 47–111°C on heating and cooling for nPPF(3)MH, 84–112 and 126–154°C for nPPF(3)MM, and 23–102 and 49–117°C for nPPF(3)MN, respectively. Compared to non-fluorinated analogues, monofluorinated nPPF(3)Mx have low melting/clearing points and display enhanced mesophase range both in heating and cooling, which are attributed to the disruption of the side-to-side intermolecular packing caused by the ortho lateral fluoro substituents and the increased dipole–dipole interaction between the polar fluoro-substituted molecules, respectively. It is noted that nPPF(3)MM and nPPF(3)MN show a much wider mesophase range than nPPF(3)MH, which suggest that the substituent at benzimidazole moiety can improve the mesophase stability.     

Synthesis and mesomorphic properties of 2-(4′-alkoxybiphenyl-4-yl)-1H-benzimidazole derivatives

Three series of 2-(4′-alkoxybiphenyl-4-yl)-1H-benzimidazole derivatives (nM-x), which possessed 5-nitrobenzimidazole (nM-N series), benzimidazole (nM-H series) or 5-methylbenzimidazole (nM-M series) units at the end of the molecule, were synthesised and characterised by infrared, ¹H- and ¹³C-nuclear magnetic resonance spectra, electrospray ionisation-mass spectrometry and elemental analysis. Their phase transition behaviour was investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. All the compounds exhibited enantiotropic smectic mesophases with wide temperature domains for a carbon number in the alkoxy chain from 6 to 16, where the mesophase ranges were 14–91°C and 17–99°C during heating and cooling processes for the nM-N compounds, 7–25°C and 8–49°C for the nM-H compounds and 48–81°C and 52–85°C for the nM-M compounds, respectively. The effect of the length of alkoxy chain on mesomorphic properties was discussed. The nM-N and nM-M exhibited a much wider mesophase range whether during heating or cooling process than the corresponding nM-H series, especially for the longer terminal chain (n > 8), which indicated that the substituent in the benzimidazole moiety was helpful in increasing the mesophase stability.     

Nematic mesophase enhanced via lateral monofluorine substitution on benzoxazole-liquid crystals

Fluorine is widely used as a lateral substituent to modify the physical properties of liquid crystals. Here, laterally monofluorinated compounds, 2-(4?-alkoxy-2-fluorobiphenyl-4-yl)-benzoxazole derivatives (nPPF(2)Bx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(2)BH, nPPF(2)BM and nPPF(2)BN, respectively) at 5-position, were synthesised and characterised. It is interesting to note that these only display enantiotropic nematic mesophases with mesophase ranges of 12–28°C and 13–45°C on heating and cooling for nPPF(2)BH, 46–97°C and 62–120°C for nPPF(2)BM and 82–108°C and 87–113°C for nPPF(2)BN, which are very different from the corresponding monofluorine-substituted analogue (compounds I) with enantiotropic smectic or smectic/nematic mesophases. The enhanced nematic mesophase is attributed to the reduced π–π interaction/conjugation resulting from the twisted structure of the molecule caused by the introduction of a fluorine atom into the inter-ring of the biphenyl unit. These results suggest that modification of the monofluorine substituent position is an effective method to improve the nematic mesophase in benzoxazole-liquid crystals.     

Synthesis and characterisation of benzoxazole-based liquid crystals possessing 3,5-difluorophenyl unit

Series of fluorinated compounds, 2-(3′,5′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nFBx), were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. In the case of carbon atoms in the alkoxy chain between 4 and 10, they exhibited enantiotropic mesophases with the mesophase ranges of 12–119°C and 23–152°C on heating and cooling for compounds bearing different substituents (H, CH₃, Cl, and NO₂). With the exception of nitro-substituted compounds, the nFBx series displayed intense photoluminescence emission at 380–385 nm in methylene chloride solution when they were excited at their absorption maxima. Compared to non-fluorinated analogues, fluorinated compounds nFBx (apart from nitro-substituted compounds) exhibited much lower melting points, but comparable or slightly narrower mesophase ranges during both heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two lateral fluoro substituents.     

Preparation and properties of laterally multifluorinated benzoxazole-based nematic mesogens

Series of laterally multifluorinated heterocyclic compounds, 2-(2?,3-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (nPF(2)PF(3)Bx), are prepared and characterised. They mainly display enantiotropic nematic mesophases with wider mesophase ranges of 12–107°C (heating process) and 22–134°C (cooling process) than the corresponding analogues. The enhanced nematic mesophase stability is achieved via slightly increasing inter-ring twist angle with inter-ring lateral fluorine substitute in biphenyl unit, as well as through improving the molecular polarity with multifluorine substitutes. Meanwhile, two inter-ring lateral fluorine atoms lead to a decrease in melting/clearing points and a wide nematic mesophase range, which makes it possible for heterocyclic mesogens nPF(2)PF(3)Bx to use in nematic liquid crystal display mixtures.     

Preparation and properties of lateral monofluoro-substituted benzoxazole-based mesogenic compounds

A series of 2-(3?-fluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole liquid crystals (coded as nPF(3)PBx) were prepared, where a lateral fluorine substituent, as well as methyl, chlorine and nitro terminal groups, was introduced into the molecules to investigate the effects of different polar substituents on the liquid crystal properties. The mesomorphic and photophysical properties were investigated. The results show that compounds nPF(3)PBx have enantiotropic mesophases; meanwhile, they exhibit UV–vis absorption bands with maxima at 323–326 nm and photoluminescence emission peaks at 389–395 nm, respectively. It is noted that nPF(3)PBx with terminal polar groups or electron-withdrawing groups (NO₂, Cl) display higher clearing temperatures and wider mesophase range than those of the corresponding homologues with terminal non-polar groups or electron-donating groups (CH₃, H). Meanwhile, compared with two lateral fluorine-substituted analogues containing 3,5-difluorophenyl unit, lateral monofluoro-substituted nPF(3)PBx display enhanced mesophase range both in heating and cooling except for terminal methyl-substituted compounds, as well as show obvious red-shifted UV–vis absorption bands and photoluminescence emission, which are attributed to the enhanced dipole–dipole interaction caused by increased dipole moment.     

Effect of lateral bromo substituent on the phase behavior of four-ring azo/ester/azo liquid crystalline materials

ABSTRACT

In order to study the influence of lateral Br substitution on mesophase behaviour, five homologous series of 4-substituted phenylazo phenyl 4?-(3?-bromo-4?-alkoxyphenylazo) benzoates (In_a–e) have been synthesised. Within each homologous series, the alkoxy group varies from 6 to 16 carbons, while other terminal group substituents, X, are CH₃O, CH₃, H, Br and NO₂ groups; the mesophase behaviour of these series is compared with previously prepared laterally neat analogues, 4-substituted phenylazo phenyl 4?-(4?-alkoxyphenylazo) benzoates (IIn_a–e) and laterally methyl analogues, 4-substituted phenylazo phenyl 4?-(3?-methyl-4?-alkoxyphenylazo) benzoates (IIIn_a–e). Similar to lateral methyl analogues, the present series, lateral Br substitution showed that, independent of the polarity of the substituent X or the alkoxy-chain length, the nematic phase is predominant with relatively high stability and broad temperature ranges. The mesophase stability varies between 204.0°C and 335.0°C for the nematic phase and 169.6°C and 281.0°C for the SmA phase. Their total mesophase temperature ranges vary between 87.2°C and 201.4°C. All compounds were found to be thermally stable within the mesophase temperature range, except the lower homologue of the nitro and Br substituted derivatives. The obtained results are discussed in terms of molecular polarisability.     

Synthesis and thermal behavior of Janus dendrimers,part 2

The thermal properties of twelve Janus-type dendrimers up to the second generation were evaluated by termogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-bis-dodecyloxybenzoic acid, 3,5-bis-dodecyloxybenzoic acid or 3,4,5-tris-dodecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The thermal stability of the compounds was evaluated by TGA, displaying onset decomposition temperatures (T_d) at around 250 °C. DSC measurements upon heating and cooling confirmed that OH terminated Janus dendrimers featuring large polarity difference in opposite sides display liquid crystalline phases with exception of 3,5-type G1 dendrimer; while acetonide terminated dendrimers displayed merely melting transitions. Dendrimers having terminal alkyl chains at positions 3,4 or 3,4,5 in aromatic moieties exhibited enantiotropic mesophases. However, the thermal behavior of the dendrimers with 3,5-substitution pattern was different: the 3,5-type G1 dendrimer exhibit a lack of mesomorphic transition, and in the case of the 3,5-type G2 dendrimer, the mesophase was absent in the first heating scan but was observed during the subsequent cooling and heating scans at the rate of 10 °C/min.     

Synthesis and properties of mesogenic laterally fluorinated compounds containing benzoxazole unit

Series of mesogenic laterally fluorinated compounds, 2-(2′,3′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nB-Fx) bearing different substituents (H, CH₃, Cl, NO₂, coded as nB-FH, nB-FM, nB-FC and nB-FN, respectively) at 5-position, were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. nB-Fx with alkoxy chain lengths of 2 to 10 carbons exhibited enantiotropic mesophases, for which the mesophase ranges were 0°C–58°C and 0°C–71°C on heating and cooling for nB-FH, 41°C–93°C and 66°C–140°C for nB-FM, 44°C–133°C and 87°C–155°C for nB-FC, and 0°C–76°C and 0°C–95°C for nB-FN, respectively. Compared to non-fluorinated analogues, with the exception of nB-FC, fluorinated nB-Fx mainly exhibited nematic mesophase both in heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two ortho-lateral fluoro substituents. For nB-Fx series, nB-FM, nB-FC and nB-FN exhibited a much wider mesophase range than the corresponding nB-FH series, which indicated that the substituent at benzoxazole moiety was helpful in increasing the mesophase stability. With the exception of nB-FN, the nB-Fx series displayed intense photoluminescence emission at 379–383 nm in methylene chloride solution, when it was excited at its absorption maxima.     

Synthesis and mesomorphic properties of 7-alkoxybezopyrano[2,3-c]pyrazol-3-one

A new series of fused polyheterocyclic aromatic compounds, 7-alkoxybezopyrano[2,3-c]pyrazol-3-one (C- n BPP), were synthesised and characterised by infrared, ¹H-nuclear magnetic resonance (NMR), ¹³C-NMR and two-dimensional ¹H-¹³C cosy spectra. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. All of these compounds showed enantiotropic mesophases with temperature domains of 12–60°C and 22–69°C on heating and cooling processes for a carbon number of the alkoxy chain from 2 to 10. The effect of the length of the alkoxy chain on the mesomorphic properties was discussed. Comparison of C- n BPP and several kinds of coumarin derivatives indicated that the intermolecular hydrogen bonding acted as the driving force of the mesophase formation.     

Hybrid liquid crystals tetrazolyl and isoxazolyl cinnamates

In this work, a series of isoxazolyl and tetrazolylcinnamic ester hybrid liquid crystals (HLCs) were synthesised and their mesomorphic behaviour was analysed. Cinnamic acid derivatives were prepared by Knoevenagel condensation of malonic acid and arylaldehydes. Five-membered tetrazoles and isoxazoles were prepared by [3 + 2] 1,3-dipolar cycloaddition. Tetrazoles were synthesised by sodium azide addition to arylnitrile, while isoxazoles were synthetised by arylnitrile oxide addition to alkenes to form isoxazolines, followed by MnO₂-oxidation. Tetrazolyltolane compounds were also synthesised and their LC behaviour compared with cinnamic esters. HLCs containing isoxazole rings displayed a large mesophase range with high clearing temperature (T_c), with predominance of smectic mesophases SmA and SmC. The HLCs decomposed upon heating due to their high clearing temperature (>250°C). HLCs with tetrazole rings showed a narrow nematic mesophase range with enantiotropic or monotropic behaviour.     

New liquid crystalline di- and tetra-acrylates for network formation

New liquid crystalline diacrylates and tetra-acrylates containing four to six aromatic rings were synthesized and characterized, and their mesophase behaviour was investigated. They are designed to be used in combination with chiral molecules to form cholesteric mesophases which can be crosslinked by photopolymerization. The acrylates presented exhibit broad mesophase ranges since mesogenic moieties longer than three are employed. Most diacrylates show no isotropization, due to premature thermal polymerization above 180°C. Additionally, liquid crystalline dipropionates were synthesized as reference compounds which cannot be crosslinked, and selected examples of these exhibit isotropization temperatures as high as 238°C prior to thermal degradation. Substituents at the mesogenic moiety have a great influence on the mesophase characteristics. Bulky substituents such as the tert-butyl group, induce a nematic mesophase, whereas compounds with small substituents (e.g. OCH3) or unsubstituted molecules also exhibit smectic phases. Tetra-acrylates with unsubstituted and substituted mesogenic units feature nematic mesophases only as a result of the additional spacers attached. Here isotropization was observed without polymerization at temperatures around 120-160°C.     

The effect of terminal substituents on crystal structure,mesophase behaviour and optical property of azo-ester linked materials

A series of azo-ester linked mesogen containing liquid crystalline acrylate compounds C1-C6 having different terminal groups (–F, –Cl, –Br, –OCH₃, –OC₂H₅ and –OC₃H₇) were successfully synthesised and characterised. The chemical structure, purity, thermal stability, mesophase behaviour and optical property of the synthesised compounds were investigated by different instrumental techniques. X-ray crystal structure showed that compounds C1, C4 and C5 exhibited more stable E configuration with two bulky group in the opposite side of the N=N double bond motifs. The fluoro-substituted derivative (C1) is connected by the R¹₂(5) type of C–H…O hydrogen bond motifs whereas the molecules of C4, and C5 are connected to each other by means cyclic R²₂(8) type of C–H…O hydrogen bond motifs. Thermogravimetric study revealed that the investigated compounds exhibited excellent thermal stability. All the compounds showed enantiotropic liquid crystal (LC) phase behaviour and the mesophase formation was greatly influenced by the terminal substituents. Alkoxy (–OCH₃, –OC₂H₅ and –OC₃H₇) substituted compounds exhibited greater mesophase stability than those of halogen (–F, –Cl and –Br) terminated derivatives. UV-vis spectroscopic study revealed that the investigated compounds exhibited a broad absorption band around 300–420 nm with absorption maximum (λ_max) of nearly 370 nm.     

Thermotropic Liquid Crystals Based on Extended 2,5‐Disubstituted‐1,3,4‐Oxadiazoles: Structure–Property Relationships,Variable‐Temperature Powder X‐ray Diffraction,and Small‐Angle X‐ray Scattering Studies

A class of extended 2,5‐disubstituted‐1,3,4‐oxadiazoles R¹‐C₆H₄‐{OC₂N₂}‐C₆H₄‐R² (R¹=R²=C₁₀H₂₁O 1 a , p‐C₁₀H₂₁O‐C₆H₄‐C?C 3 a , p‐CH₃O‐C₆H₄‐C?C 3 b ; R¹=C₁₀H₂₁O, R²=CH₃O 1 b , (CH₃)₂N 1 c ; F 1 d ; R¹=C₁₀H₂₁O‐C₆H₄‐C?C, R²=C₁₀H₂₁O 2 a , CH₃O 2 b , (CH₃)₂N 2 c , F 2 d ) were prepared, and their liquid‐crystalline properties were examined. In CH₂Cl₂ solution, these compounds displayed a room‐temperature emission with λ_max at 340–471 nm and quantum yields of 0.73–0.97. Compounds 1 d , 2 a – 2 d , and 3 a exhibited various thermotropic mesophases (monotropic, enantiotropic nematic/smectic), which were examined by polarized‐light optical microscopy and differential scanning calorimetry. Structure determination by a direct‐space approach using simulated annealing or parallel tempering of the powder X‐ray diffraction data revealed distinctive crystal‐packing arrangements for mesogenic molecules 2 b and 3 a , leading to different nematic mesophase behavior, with 2 b being monotropic and 3 a enantiotropic in the narrow temperature range of 200–210 °C. The structural transitions associated with these crystalline solids and their mesophases were studied by variable‐temperature X‐ray diffractometry. Nondestructive phase transitions (crystal‐to‐crystal, crystal‐to‐mesophase, mesophase‐to‐liquid) were observed in the diffractograms of 1 b, 1 d , 2 b, 2 d , and 3 a measured at 25–200 °C. Powder X‐ray diffraction and small‐angle X‐ray scattering data revealed that the structure of the annealed solid residue 2 b reverted to its original crystal/molecular packing when the isotropic liquid was cooled to room temperature. Structure–property relationships within these mesomorphic solids are discussed in the context of their molecular structures and intermolecular interactions.     

Mesophase behaviour of laterally di-fluoro-substituted four-ring compounds

Four new groups of the di-fluoro-substituted 4-(2′-(or 3′)-fluoro phenylazo)-2-(or 3-) fluoro phenyl-4″-alkoxyphenylazo benzoates (In–IVn) were prepared and investigated for their mesophase behaviour. An alkoxy group of variable chain length (n = 6, 10 and 14 carbons) is attached to the terminal phenylazo benzoate moiety, and two lateral fluoro substituents are attached individually with different orientations to the other two adjacent rings. The molecular structures of the prepared compounds were confirmed by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. The study aims to investigate the steric effect of the spatial orientation and relative positions of the two lateral fluorine atoms on the mesomorphic properties in their pure states. The mesophase behaviour was investigated via differential scanning calorimetry and mesophases were identified by polarised light microscopy. The investigation shows that these compounds exhibit high enantiotropic mesophases (SmC and N) and broad mesophase temperature range. The type and stability of the mesophase depends on the length of the terminal alkoxy chain and the position the two fluoro substituents. A comparison between these investigated compounds with their corresponding three-ring analogues was discussed.     

Comparison of liquid crystalline properties of dimeric compounds of different skeletal shapes

Series of dimeric compounds of different skeletal shapes consisting of two triad aromatic ester type mesogenic moieties connected via polymethylene spacers were synthesized and their liquid crystalline properties compared. The two mesogenic units are connected in either Hor T-shape or in linear fashion. In general, it was found that mesophase temperature ranges for the T- and linear-shaped compounds are much wider than for the H-shaped compounds. Moreover, the former are enantiotropic thermotropic materials, whereas the latter tend to be monotropic unless the spacer length is fairly long, i.e. longer than decamethylene. Among the three series, the linearly linked twin compounds had the highest melting and isotropization temperatures. All of the linear and T-shaped dimeric compounds reported in this article form only nematic mesophases.     

Synthesis and mesomorphic behaviour of hexacatenar di-hydrazine derivatives

A new series of hydrazide derivatives of N,N-bis(3,4,5-tris(heptyloxy)benzoyl) (T7 series) were designed and synthesised. Investigations on the liquid crystalline properties by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarising optical microscopy (POM) showed that the di-hydrazine derivatives exhibited different mesophases, which were ascribed to the different structure of T7 series. The rectangular columnar mesophases of T7-ben remained stable down to room temperature during cooling, T7-fuma was decomposed at 259°C in the first heating, while T7-mal showed simple cubic mesophase and crystalline phase at room temperature during cooling. Comparing Fourier-transformed infrared (FTIR) at room temperature of T7 series, some differences were found in the N–H stretching vibration and C = O stretching vibration bands, indicating that T7 series had some differences in intermolecular hydrogen bond strength, which were caused by the different linking unit of T7 series. Intermolecular hydrogen bonding between –C = O and –N–H groups in crystalline and liquid crystalline phases was confirmed by temperature FTIR spectroscopy and temperature ¹H NMR spectroscopy.     

Comparison of liquid crystalline properties of dimeric compounds of different skeletal shapes

Series of dimeric compounds of different skeletal shapes consisting of two triad aromatic ester type mesogenic moieties connected via polymethylene spacers were synthesized and their liquid crystalline properties compared. The two mesogenic units are connected in either Hor T-shape or in linear fashion. In general, it was found that mesophase temperature ranges for the T- and linear-shaped compounds are much wider than for the H-shaped compounds. Moreover, the former are enantiotropic thermotropic materials, whereas the latter tend to be monotropic unless the spacer length is fairly long, i.e. longer than decamethylene. Among the three series, the linearly linked twin compounds had the highest melting and isotropization temperatures. All of the linear and T-shaped dimeric compounds reported in this article form only nematic mesophases.