光弹性等倾线获取的图像处理技术

提出一种对数微分法,有效地解决了光弹性实验中等倾线的提取问题,不仅可消除平面偏振光场中等差线对等倾线的影响,而且能高精度地提取任意复杂受力模型等倾线.最后给出了等倾线提取及精度分析的两个实例,实验证明;本方法具有广阔的应用前景.     

网状系杆拱连续梁桥的光弹性应力分析

采用光弹性冻结应力法对网状系杆拱连续梁桥进行了不同工况下的应力分析,给出了边界应力分布和主应力迹线,为优化工程设计提供了参考依据．     

地铁车站地下拱型结构的光弹性应力分析

本文用三维光弹性法,对地铁车站地下拱型结构进行了实验应力分析并绘出主应力迹线。文中还提出对加压用乳胶气囊进行高温、高压预处理工艺,使乳胶气囊和模型曲面很好地吻合,从而提高了加载的准确度。     

光弹性等倾线的同时全场显示方法

本文提出同时实时记录对应于两个或两个以上主应力方向角的等倾线方法,改变了每次只能测绘一条等倾线的传统方法,不仅极大地缩短了等倾线检测时间,而且提高了检测精度。     

彩色光弹性干涉影像分析系统

自行开发的“彩色光弹性干涉影像分析系统”首先利用CCD成像和图像采集设备,将光弹图像以数字图像的形式存储到计算机,然后通过对存储的光弹图像进行处理,得到物体边界、等差线、等倾线等数据。最后根据这些数据,绘制出主应力迹线,并进行二维的和三维的应力分析。本文着重介绍了系统整体设计以及系统研制的难点问题(彩色光弹图像处理、主应力迹线的绘制等)。系统可以通过对彩色图像进行分解,应用目前已经比较成熟的灰度光弹图像处理技术,来完成彩色图像的处理;也可以直接应用彩色信息来确定条纹级数,进行相关处理。彩色图像能够比灰度图像提供更精确的图像信息,以满足高精度测量的要求。     

光弹等差线与等倾线参数的全场检测法

本文研究了一种自动获得全场等差线级数与等倾线参数角的方法.该方法是根据“相移”思想,利用数字图像处理技术,对光弹等差线图与等倾线图进行位相检测,经过去包裹处理,确定出全场各点的等差条纹级次与主应力方向角.最后通过典型实验,考核了这种方法的正确性与处理精度。     

光弹性分析中主应力分离的新方法

本文利用极坐标形式双调和方程通解得到应力第一不变量函数,结合光弹性实验等差线,用边界配置法求得满足求解对象边界条件的主应力和函数。于是由本文方法得到的主应力和函数和光弹性中的等差线,可求得物体内部各点的主应力值。     

计算机辅助光弹性应力分析

本文提出一种新的计算机辅助光弹性应力分析方法,它具有全电子记录、全自动应力场分析、光路简单等优点。相位技术的采用使数据精度大大提高。文中给出了几种实验光路以及提高图象质量的方法,用对经受压圆盘光弹实验证明了方法的可行性。     

五腿混凝土平台的三维光弹性应力分析

本文叙述了三维光弹性在五腿混凝土平台中的应用。为了简化和完成这个试验,采用了模拟四分之一的平台结构的光弹性模型,它承受着与原型相应的各种荷载,并且仔细地处理了它的边界约束条件。实验分析采用冻结法,最后确定了一些重要截面内外边界上的轴向和环向应力,并且得到了腿柱和罐体连接部位的应力集中。     

边界元法与光弹性实验相结合的应力分析法

本文介绍了边界无法与光弹性实验相结合进行应力分析的方法。叙述了用边界无法求解主应力的基本原理。结合光弹性实验等差线条纹图,可分离出主应力。     

Photoelastic model measurement with rotated principal axes by scattered-light photoelasticity

The method of measurement of a three-dimensional photoelastic model with rotated principal axes has not yet been fully experimentally established. It is known that a three-dimensional photoelastic model can be reduced to an optically equivalent model. In this paper, the optically equivalent model is realized from a stratified model consisting of two layers of the frozen stress model. The secondary principal stress direction and the relative phase retardation of the frozen disk model in the stratified frozen stress model are determined for the entire field from Stokes parameters obtained by scattered-light photoelasticity using unpolarized light. The accuracy of these values is confirmed by a comparison with results only from the frozen stress disk model.     

复杂三维结构物的光弹性实验研究

应用光弹性原理和方法,根据有关相似原理,对研究对象的几何尺寸进行缩比、模型设计及加工成型．然后将模型在危险载荷作用下,进行应力冻结、切片及应力分析．确定了模型不同截面上的应力及其变化规律,为优化设计和调整数值计算方法提供了有价值的依据．     

数字图像处理技术用于等倾线条纹的处理

本文利用数字图像处理技术,对光弹性条纹进行处理,实现了等倾线与等差线的分离,提高了等倾线的测试精度。同时利用微机系统进行主应力迹线的绘制,提高了主应力迹线绘制的准确性.     

Limitation of fourier transform photoelasticity: Influence of isoclinics

The application of the Fourier transform to photoelasticity was used in the evaluation of the retardation using a carrier system of fringes. In photoelasticity, the light intensity from the analyzer in a circular polariscope depends on both the retardation (isochromatics) and the isoclinic parameter. The theoretical analysis shows that the angle between the principal stresses in the model and in the carrier system of fringes influences the evaluation of the retardation (isochromatics), as occurs when misaligned compensators (namely, Babinet) are used. As a consequence, this method may not be applied as a full-field technique, although the error is small if the angle between the principal stresses in the model and in the carrier is less than 25 deg. Numerical simulations and experimental tests were conducted to corroborate this prediction.     

Computer aided photoelasticity by an optimum phase stepping method

In this paper an automated photoelastic method based on the phase stepping technique is described. It provides full-field maps of the isoclinic parameter and the relative retardation. The technique is based on processing six images of a photoelastic specimen acquired using plane and circularly polarized light. The number of acquisitions and the type of polariscope used in this approach have been chosen with the aim at reducing the influence of quarter wave plate errors and obtaining raw photoelastic data in a periodic form suitable for easy applications of automatic unwrapping routines.     

结构局部应力场全景光弹测量方法研究

针对大型结构局部复杂应力场直观测量的需求,提出了全景光弹测试技术。在经典光弹实验系统中,偏振系统的大小限制了试件尺寸;同时理想光源系统的复杂性降低了实验测量的机动性。由于这两方面的限制导致经典光弹方法在测量大型复杂结构时存在较多的非确定性。为此建立了一个等效偏振系统,通过在试件表面镀制偏振膜的办法将偏振系统依附于试件表面,以解决试件尺寸限制问题。同时放弃了理想光源而采用自然光源,以提高测量的机动性。通过四点弯曲实验来检验本文方法的有效性。结果表明提出的测量技术是有效可靠的。利用本文提出的方法,对实际桥梁中缩尺试件的局部应力场进行了测量,得到了可用于结构模型修正的应力中心线信息。     

2D and 3D separation of stresses using automated photoelasticity

A procedure for the separation of full-field photoelastic images for use with an automated polariscope is described. Regions of background in the image are identified thus producing the boundary of the model. The shear difference method is used to calculate the components of stress along all raster lines in the image using photoelastic parameters at the boundary points to calculate the initial values of stress. Algorithms were also used to evaluate the stress components along raster lines which did not contain boundary points. A plastic template was used to evaluate the efficiency of the boundary routine. It was found that it was able to identify edges to within approximately one pixel on screen. The complete procedure for stress separation was evaluated using a stress frozen disc in compression and a turbine slot. The values of stress found using the automated polariscope with the stress-separation procedure were found to agree well with theory and with results determined using the method of Tardy compensation and manual analysis. The automated polariscope was also used to analyze three-dimensional stress components along arbitrary lines of a 3D model. A two-model slicing regime was used to analyze a strut subjected to a vertical load. This work was compared to results obtained by Frocht and Guernsey on an identical model machined from Fosterite and subjected to a higher load. Good agreement was found between the results for points away from the region of loading. Significant differences were found near to the load point, however. A finite element analysis of the same problem suggested that this was due to the effects of plasticity.     

提取等倾线的数字图象处理法

本文详细介绍了应用数字图象处理技术进行图象相除和图象相减,获取没有等色线干扰的、精确定位的和倍增信息的等倾线的全场分析方法,并作了典型验证实验,为光测弹性力学的改革提供了途径和理论依据。