Electrochemical Behaviour of HOPG and CVD‐Grown Graphene Electrodes Modified with Thick Anthraquinone Films by Diazonium Reduction

Highly oriented pyrolytic graphite (HOPG) and graphene grown on Ni (Ni‐Gra) or Cu (Cu‐Gra) by chemical vapour deposition were modified with thick anthraquinone (AQ) films (7?60 nm) by redox grafting of the pertinent diazonium salt. Glassy carbon (GC) electrodes were used for comparison. The AQ‐modified GC electrodes showed excellent blocking properties towards the Fe(CN)₆^3?/4? redox probe, although it was noted that in the case of Ni‐Gra and Cu‐Gra, the blocking ability depended strongly on the underlying substrate. Oxygen reduction studies revealed good electrocatalytic activity of AQ‐modified HOPG, Ni‐Gra, and Cu‐Gra, compared with the bare electrodes.     

Blocking Behavior of Covalently Attached Anthraquinone Towards Solution‐Based Redox Probes

The electrochemical properties of glassy carbon (GC) electrodes modified with 9,10‐anthraquinone (AQ) have been investigated. Electrografting of GC surface was carried out from the solution of the AQ diazonium derivative. The blocking action of GC/AQ electrodes for Fe(CN)$\rm{{_{6}^{3-}}}$ and Ru(NH₃)$\rm{{_{6}^{3+}}}$ redox probes was studied using cyclic voltammetry (CV) and the rotating disk electrode (RDE) method. It was established that the extent of blocking was a function of AQ surface concentration. A peculiar behavior was observed at the potentials of AQ reduction.     

Electroanalytical Study of Prussian Blue Modified Glassy Carbon Paste Electrodes

Two types of glassy carbon (GC) powder (i.e., Sigradur K and Sigradur G) have been mixed with mineral oil to obtain glassy carbon paste electrodes (GCPE's). The electrochemical behavior of such electrodes at different percentages of glassy carbon has been evaluated with respect to the electrochemistry of ferricyanide as revealed with cyclic voltammetry and the best paste composition was chosen. GC was then modified with Prussian Blue (PB), mixed at different percentages with unmodified GC and with a fixed amount of mineral oil in order to obtain PB modified glassy carbon paste electrodes (PB‐GCPE's). PB‐GCPE's with different percentages of GC modified with PB (PB‐GC) were compared and the dependence on the amount of PB on their performances was evaluated by studying the parameters of cyclic voltammetry (i.e., current peak, ΔE_p, anodic and cathodic current ratio, charge density) and the amperometric response to H₂O₂. Data interpretation based on the GC surface area is presented. GCPE's with a selected amount of PB‐GC were then tested as H₂O₂ probes and all the analytical parameters together with the dependence on pH were evaluated. Some preliminary experiments with these electrodes assembled as glucose, lysine and lactate biosensors are also reported.     

Oxygen reduction on carbon nanomaterial-modified glassy carbon electrodes in alkaline solution

Electroreduction of oxygen in alkaline solution on glassy carbon (GC) electrodes modified with different carbon nanomaterials has been studied. Electrochemical experiments were carried out in 0.1 M KOH employing the rotating disk electrode and rotating ring-disk electrode methods. The GC disk electrodes were modified with carbon nanomaterials using polytetrafluoroethylene as a binder. Four different carbon nanomaterials were used: multiwalled carbon nanotubes, carbon black powder, and two carbide-derived carbons (CDC). For the first time, the electrocatalytic behavior of CDC materials toward oxygen reduction is explored. Electrochemical characterization of the materials showed that all the carbon nanomaterial-modified GC electrodes are highly active for the reduction of oxygen in alkaline solutions.     

2D Hexagonal Boron Nitride (2D‐hBN) Explored as a Potential Electrocatalyst for the Oxygen Reduction Reaction

Crystalline 2D hexagonal Boron Nitride (2D‐hBN) is explored as a potential electrocatalyst towards the oxygen reduction reaction (ORR) when electrically wired via a drop‐casting approach upon a range of carbon based electrode surfaces; namely, glassy carbon (GC), boron‐doped diamond (BDD), and screen‐printed graphitic electrodes (SPEs). We consider the ORR in acidic conditions and critically evaluate the performance of unmodified and 2D‐hBN modified electrodes, implementing coverage studies (commonly neglected in the literature) in order to ascertain the true impact of this novel nanomaterial. The behaviour of 2D‐hBN towards the ORR is shown to be highly dependent upon both the underlying carbon substrate and the coverage/mass utilised. 2D‐hBN modified SPEs are found to exhibit the most beneficial response towards the ORR, reducing the peak potential by ca . 0.28 V when compared to an unmodified/bare SPE. Such improvements at this supporting substrate are inferred due to favourable 2D‐hBN interaction with ridged surfaces exposing a high proportion of edge regions/sites, where conversely, we show that relatively smooth substrate surfaces (such as GC) are less conducive towards successful 2D‐hBN immobilisation. In this paper, we reveal for the first time (in the specific case of using a rough supporting substrate) that 2D‐hBN gives rise to beneficial electrochemical behaviour towards the ORR. Unfortunately, this material is not considered an electrocatalyst for use within fuel cells given that the estimated number of electrons transferred during the ORR ranges between 1.90–2.45 for different coverages, indicating that the ORR at 2D‐hBN predominantly produces hydrogen peroxide. 2D‐hBN does however have potential and should be explored further by those designing, fabricating and consequently electrochemically testing modified electrocatalysts towards the ORR.     

Electrocatalytic Dioxygen Reduction at Glassy Carbon Electrode Modified with Polyaniline Grafted Multiwall Carbon Nanotube Film

The work details the electrocatalysis of oxygen reduction reaction (ORR) in 0.5 M H₂SO₄ medium on a modified electrode containing a film of polyaniline (PANI) grafted multi‐wall carbon nanotube (MWNT) over the surface of glassy carbon electrode. We have fabricated a novel modified electrode in which conducting polymer is present as connected unit to MWNT. The GC/PANI‐g‐MWNT modified electrode (ME) is fabricated by electrochemical polymerization of a mixture of amine functionalized MWNT and aniline with GC as working electrode. Cyclic voltammetry and amperometry are used to demonstrate the electrocatalytic activity of the GC/PANI‐g‐MWNT‐ME. The GC/PANI‐g‐MWNT‐ME exhibits remarkable electrocatalytic activity for ORR. A more positive onset potential and higher catalytic current for ORR are striking features of GC/PANI‐g‐MWNT‐ME. Rapid and high sensitivity of GC/PANI‐g‐MWNT‐ME to ORR are evident from the higher rate constant (7.92×10² M^?1 s^?1) value for the reduction process. Double potential chronoamperometry and rotating disk and rotating ring‐disk electrode (RRDE) experiments are employed to investigate the kinetic parameters of ORR at this electrode. Results from RDE and RRDE voltammetry demonstrate the involvement of two electron transfer in oxygen reduction to form hydrogen peroxide in acidic media.     

Electrocatalytic Activity of Nanohybrids Based on Carbon Nanomaterials and MFe2O4 (M=Co,Mn) towards the Reduction of Hydrogen Peroxide

We report the advantages of hybrid nanomaterials prepared with electrogenerated ferrites (MFe₂O₄; M: Co, Mn) and multi‐walled carbon nanotubes (MWCNTs) or thermally reduced graphene oxide (TRGO) on the electro‐reduction of hydrogen peroxide. Glassy carbon electrodes (GCE) modified with these hybrid nanomaterials dispersed in Nafion/isopropanol demonstrated a clear synergism on the catalytic reduction of reduction of hydrogen peroxide at pH 13.00. The intimate interaction between MFe₂O₄ and carbon nanomaterials allowed a better electronic transfer and a facilitated regeneration of M²⁺ at the carbon nanomaterials, reducing the charge transfer resistances for hydrogen peroxide reduction and increasing the sensitivities of the amperometric response.     

XPS analysis of glassy carbon electrodes chemically modified with 8‐hydroxyquinoline‐5‐sulphonic acid

Glassy carbon (GC) modified electrodes were obtained by cycling the potential in an 8‐hydroxyquinoline‐5‐sulphonic acid (HQSA) solution. These electrodes were successfully tested as sensors of some species of alimentary and pharmaceutical interest, showing improved performances with respect to those of unmodified GC electrodes and of GC electrodes cycled under the same experimental conditions but in the absence of HQSA. As a matter of fact, in the wide potential range explored for modifying the electrodes, even in the absence of HQSA, complex redox processes leading to the production of several functional groups take place at the surface of glassy carbon itself. An XPS investigation was consequently performed to better understand the effective nature of active species present on the surface of HQSA modified electrodes. The spectroscopic experiments involved acquiring survey and detailed scans of an HQSA powder standard sample and of GC electrodes cycled both in the presence and in the absence of HQSA. The experimental value of the binding energy of the S2p_3/2 level of HQSA‐modified electrodes was found equal to that of the HQSA standard powder, thus confirming that HQSA molecules are adsorbed on the surface of the GC/HQSA electrodes and that they maintain their chemical structure and properties. Copyright © 2011 John Wiley & Sons, Ltd.     

Oxygen electroreduction on anthraquinone-modified nickel electrodes in alkaline solution

The electrochemical reduction of oxygen has been studied on anthraquinone (AQ) modified nickel electrodes in 0.1 M KOH solution using the rotating disk electrode (RDE) technique. Modification of the Ni electrode surface with AQ by electrochemical reduction of the corresponding diazonium salt was carried out in two different media (in acetonitrile and in aqueous acidic solution). The AQ-modified Ni electrodes showed a good electrocatalytic activity for O₂ reduction. The RDE data indicate that the reduction of oxygen on Ni/AQ electrodes proceeds by a two-electron pathway in alkaline solution. The O₂ reduction results obtained for Ni/AQ electrodes are compared with those of AQ-modified glassy carbon electrodes.     

Carbon Nanodots as Electrocatalysts towards the Oxygen Reduction Reaction

Electrocatalysts perform a key role in increasing efficiency of the oxygen reduction reaction (ORR) and as a result, efforts have been made by the scientific community to develop novel and cheap materials that have the capability to exhibit low ORR overpotentials and allow the reaction to occur via a 4 electron pathway, thereby mimicking as close as possible to traditionally utilised platinum. In that context, two different types of carbon nanodots (CNDs) with amide (CND‐CONH₂) and carboxylic (CND‐COOH) surface groups, have herein been fabricated and shown to exhibit excellent electrocatalytic activity towards the ORR in acid and basic media (0.1 M H₂SO₄ and 0.1 M KOH). CND surface modified carbon screen‐printed electrodes allow for a facile electrode modification and enabling the study of the CNDs electrocatalytic activity towards the ORR. CND‐COOH modified SPEs are found to exhibit improved ORR peak current and reduced overpotential by 21.9 % and 26.3 %, respectively compared to bare/unmodified SPEs. Additionally, 424 μg cm⁻² CND‐COOH modified SPEs in oxygenated 0.1 M KOH are found to facilitate the ORR via a near optimal 4 (3.8) electron ORR pathway. The CNDs also exhibited excellent long‐term stability and tolerance with no degradation being observed in the achievable current with the ORR current returning to the baseline level within 100 seconds of exposure to a 1.5 M solution of methanol. In summary, the CND‐COOH could be utilised as a cathodic electrode for PEMFCs offering greater stability than a commercial Pt electrode.     

Electrocatalysis of oxygen reduction on glassy carbon electrodes modified with anthraquinone moieties

Anthraquinone groups were electrochemically grafted to glassy carbon (GC) electrodes via methylene linker to study the oxygen reduction reaction (ORR) in alkaline medium. Two different anthraquinone derivatives, 2-bromomethyl-anthraquinone or 2-chloromethyl-anthraquinone, were used to modify the GC electrode surface. Several modification conditions encompassing potential cycling and electrolysis at a fixed potential were employed in order to vary the surface concentration of MAQ groups (Γ _MAQ) and to study the dependence of the O₂ reduction behaviour on electrografting procedure. Cyclic voltammetry confirmed the presence of anthraquinone moieties attached to the GC electrode and Γ _MAQ varied in the range of (0.5–2.4)?×?10^?10 mol cm^?2. Oxygen reduction was studied on MAQ-modified GC electrodes of various surface coverage using the rotating disc electrode (RDE) and rotating ring-disc electrode (RRDE) methods. The RDE and RRDE results of O₂ reduction reveal that GC/MAQ electrodes show rather similar electrocatalytic behaviour towards the ORR yielding hydrogen peroxide as the final product.     

Electrocatalytic Reduction of Oxygen at Anthraquinonedisulfonate/Polypyrrole Composite Film Modified Electrodes and Its Application to the Electrochemical Oxidation of Azo Dye

We report here the electrocatalytic reduction of oxygen on thin anthraquindisulfonate (AQDS)/poplypyrrole (PPy) composite film modified electrodes and its application to the electrooxidation of azo dye‐amaranth. The polymer‐coated cathode exhibited good electrocatalytic activity towards oxygen reduction reaction (ORR), and allowed the formation of strong oxidant hydroxyl radical (^.OH) in the medium via Electro‐Fenton's reaction between cathodically generated H₂O₂ and added or regenerated Fe²⁺. The electrochemical behaviors of ORR in various pH solutions were described using cyclic voltammetry (CV), rotating disk electrode (RDE) and chronoamperometric (CA) techniques. The effect of solution pH on amaranth mineralization by the Fe²⁺/H₂O₂ and Fe³⁺/H₂O₂ electrooxidation systems was studied. In addition, the long‐term electrocatalytic activity and stability of the AQDS/PPy composite film during multiple experimental runs were also examined electrochemically.     

Electrochemiluminescence Based on Solid State Tri(4,7‐diphenyl‐1,10‐phenanthroline) Ruthenium(II) Ditetrakis(4‐chlorophenyl) Borate Immobilized on Carbon Fibers

A simple method for immobilization of tri(4,7‐diphenyl‐1,10‐phenanthroline) ruthenium(II) ditetrakis(4‐chlorophenyl) borate ([Ru(dpp)₃][(4‐Clph)₄B]₂) on carbon fiber electrodes was developed. Excellent electrochemical activity and electrochemiluminescence (ECL) signal of the coated carbon fiber electrodes were observed using oxalate as the co‐reactant. In addition, the effects of pH, scan rate, nitrogen and oxygen on ECL intensity were also studied. To demonstrate the reliability, the coated carbon fiber electrodes were used as ECL detectors and very low concentration of phenol was detectable (5.0×10^?8 M).     

Comparative Studies on Electrocatalytic Activities of Chemically Reduced Graphene Oxide and Electrochemically Reduced Graphene Oxide Noncovalently Functionalized with Poly(methylene blue)

This study compares the electrocatalytic activities of chemically reduced graphene oxide (crGO) and electrochemically reduced graphene oxide (erGO), which are both noncovalently functionalized with a polyaromatic dye, poly(methylene blue) (polyMB), toward the oxidation of β‐nicotinamide adenine dinucleotide (NADH). PolyMB‐crGO and polyMB‐erGO composites were obtained via electropolymerization of methylene blue on crGO and GO modified glassy carbon (GC) electrodes, respectively. Cyclic voltammetry (CV) results indicate that these two types of integrated electrodes reveal different electrocatalytic activities. PolyMB‐crGO integrated electrode possesses lower catalytic oxidation potential, suggesting higher catalytic activity. The present study is helpful for the understanding and screening of graphene‐based advanced carbon nanomaterials for potential electrochemical applications.     

Electrocatalysis of oxygen reduction on multi-walled carbon nanotube supported copper and manganese phthalocyanines in alkaline media

Manganese phthalocyanine (MnPc) and copper phthalocyanine (CuPc)-modified electrodes were prepared using multi-walled carbon nanotubes (MWCNTs) as a support material. The catalyst materials were heat treated at four different temperatures to investigate the effect of pyrolysis on the oxygen reduction reaction (ORR) activity of these electrocatalysts. The MWCNT to metal phthalocyanine ratio was varied. Scanning electron microscopy (SEM) was employed to visualise the surface morphology of the electrodes and the x-ray photoelectron spectroscopic (XPS) study was carried out to analyse the surface composition of the most active catalyst materials. The ORR was studied in 0.1 M KOH solution employing the rotating disk electrode (RDE) method. Glassy carbon (GC) electrodes were modified with carbon nanotube-supported metal phthalocyanine catalysts using Tokuyama AS-4 ionomer. The RDE results revealed that the highest electrocatalytic activity for ORR was achieved upon heat treatment at 800 °C. CuPc-derived catalyst demonstrated lower catalytic activity as compared to the MnPc-derived counterpart, which is in good agreement with previous literature, whereas the activity of MnPc-based catalyst was higher than that reported earlier.     

Electrocatalysis of Cyclic Voltammetrically Prepared Co‐MnO2 Composite towards Oxygen Reduction Reaction (ORR)

For the first time, cobalt particles were electrodeposited on the surface of manganese oxides by cyclic voltammetry (CV) from an aqueous solution of 0.1 M Na₂SO₄ containing 5 mM CoSO₄, and then the samples obtained were characterized by scanning electron microscopy (SEM) and energy dispersive X‐ray analysis (EDAX), respectively. And then, the as‐prepared Co/MnO₂‐coated graphite electrode was employed to the oxygen reduction reaction (ORR). Interestingly, the reduction peak potential of ORR on a Co/MnO₂‐modified graphite electrode was positively shifted for about 100 mV as compared with that on a MnO₂‐modified graphite electrode, indicating that the electrocatalysis of Co/MnO₂ composite towards ORR is superior to that of pure MnO₂.     

Silica‐modified Electrodes for Electrochemical Detection of Malachite Green

New silica‐modified glassy carbon electrodes prepared with three different sorts of ordered mesoporous silica (OMS) were characterized and tested for the electrochemical detection of Malachite Green (MG). The electrodes were prepared by drop casting using silica suspensions and, for stability sake, a Nafion coating was deposited on the electrode top by the same technique. Square wave anodic stripping voltammetry was used to investigate the effect of various experimental parameters (deposition time, solution pH, silica type and concentration) on the performance of the modified electrodes. The best electrode (GC/MCM‐41‐NH₂/Nafion) with detection limit 0.36 μM, sensitivity 0.164±0.003 A/M; linear domain 1–6 μM was applied to detect MG in a commercial product commonly used as biocide in aquaria for ornamental fish.     

Influence of Metal Nanoparticles on the Electrocatalytic Oxidation of Glucose by Poly(NiIIteta) Modified Electrodes

Conductive polymeric [Ni^II(teta)]²⁺ (teta=C‐meso‐5,5,7,12,12,14‐hexamethyl‐1,4,8,11‐tetra‐azacyclotetradecane) films (poly(Ni)) have been deposited on the surface of glassy carbon (GC), Nafion (Nf) modified GC (GC/Nf) and Nf stabilized Ag and Au nanoparticles (NPs) modified GC (GC/Ag‐Nf and GC/Au‐Nf) electrodes. The cyclic voltammogram of the resulting electrodes, show a well defined redox peak due to oxidation and reduction of poly(Ni) system in 0.1 M NaOH. They show electrocatalytic activity towards the oxidation of glucose. AFM studies reveal the formation of poly(Ni) film on the modified electrodes. Presence of metal NPs increases electron transfer rate and electrocatalytic oxidation current by improving the communication within the Nf and poly(Ni) films. In the presence of metal NPs, 4 fold increase in current for glucose oxidation was observed.     

Bismuth/Polyaniline/Glassy Carbon Electrodes Prepared with Different Protocols for Stripping Voltammetric Determination of Trace Cd and Pb in Solutions Having Surfactants

To improve reproducibility, stability and sensitivity, a bismuth (Bi) thin film was coated on glassy carbon (GC) substrates which surfaces were modified with a porous thin layer of polyaniline (PANI) via multipulse potentiostatic electropolymerization to form Bi/PANI/GC electrodes (Bi/PANI/GCEs). The Bi/PANI/GCEs were used successfully for simultaneous detection and determination of Cd²⁺ and Pb²⁺ ions, and various parameters were studied with reference to square wave anodic stripping voltammetric (SWASV) signals. The experimental results depicted that the environment‐friendly Bi/PANI/GCEs had the ability to rapidly monitor trace heavy metals even in the presence of surface‐active compounds.     

A Novel Enzymatic Glucose Biosensor and Nonenzymatic Hydrogen Peroxide Sensor Based on (3‐Aminopropyl) Triethoxysilane Functionalized Reduced Graphene Oxide

In the present study, a novel enzymatic glucose biosensor using glucose oxidase (GOx) immobilized into (3‐aminopropyl) triethoxysilane (APTES) functionalized reduced graphene oxide (rGO‐APTES) and hydrogen peroxide sensor based on rGO‐APTES modified glassy carbon (GC) electrode were fabricated. Nafion (Nf) was used as a protective membrane. For the characterization of the composites, Fourier transform infrared spectroscopy (FTIR), X‐ray powder diffractometer (XRD), and transmission electron microscopy (TEM) were used. The electrochemical properties of the modified electrodes were investigated using electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The resulting Nf/rGO‐APTES/GOx/GC and Nf/rGO‐APTES/GC composites showed good electrocatalytical activity toward glucose and H₂O₂, respectively. The Nf/rGO‐APTES/GC electrode exhibited a linear range of H₂O₂ concentration from 0.05 to 15.25 mM with a detection limit (LOD) of 0.017 mM and sensitivity of 124.87 μA mM⁻¹ cm⁻². The Nf/rGO‐APTES/GOx/GC electrode showed a linear range of glucose from 0.02 to 4.340 mM with a LOD of 9 μM and sensitivity of 75.26 μA mM⁻¹ cm⁻². Also, the sensor and biosensor had notable selectivity, repeatability, reproducibility, and storage stability.