Active Ag species in MFI zeolite for direct methane conversion in the light and dark

Photo-induced methane conversion was examined over Ag-MFI zeolite at room temperature. On the oxidized Ag-MFI zeolite, containing Ag⁺ exchanged cations, huge amounts of methane were adsorbed, even in the dark, and then converted to mainly ethane upon photo-irradiation without H₂ production. It was revealed that Ag _n ⁺ small clusters were formed at the expense of Ag⁺ ion during this photoreaction, and probably hydrogen would be stored as H⁺ on the ion-exchange sites instead of Ag⁺. On the other hand, the reduced sample containing larger clusters converted methane into alkene even without photo-irradiation.     

Dodecahydro-<Emphasis Type="Italic">closo</Emphasis>-dodecaborate anion intercalation into graphite oxide

It is demonstrated by X-ray diffraction that, in the case of dodecahydro-closo-dodecaborates with small cations (H⁺, Li⁺, Na⁺, K⁺, NH ₄ ⁺ ), the intercalation of the B₁₂H ₁₂ ^2? anion into the interlayer space of graphite oxide is more favorable than the crystallization of a free salt. In the case of large cations commensurable with B₁₂H ₁₂ ^2? (e.g., Cs⁺), no intercalation takes place because these cations and the dodecaborate-closo-dodecaborate anion form stable cubic crystals as a separate phase outside the graphite oxide structure.     

Theoretical study of the borane and diborane positive ions

Summary We describe the geometric, electronic and energetic (H _f) properties of B₂H ₆ ⁺ and BH ₃ ⁺ . Comparisons with experimental measurements have also been made with borane, diborane, BH, BH⁺ and BH ₂ ⁺ . All the theoretical calculations have been performed with various basis sets: 6-31G, 6-31G and 6-31⁺G (2d,f). The geometry optimizations are done at the SCF (RHF or UHF), MP2 and MP4 levels.     

Sorption characteristics of137Cs onto clay minerals: Effect of mineral structure and ionic strength

The sorption behavior of¹³⁷Cs onto kaolinite, bentonite, illite, and zeolite was studied at different ionic strengths of Na⁺, K⁺, Ca²⁺. A significant effect of ionic strengths on the sorption has been observed. Clay minerals with 21 structure (bentonite, illite) showed much higher sorption than that of 11 structure (kaolinite). Zeolite showed high selectivity for¹³⁷Cs sorption. Sorption behavior of¹³⁷Cs on clay minerals can be explained by their surface charge characteristics originated from mineral structure.     

Sorption of Cations of the Zn2+-Hg2+-NO3--H2O System by Biomass of Ostreatus Agaricaceae Basidiomycete and KB-4(H+) Cation Exchanger

Sorption of cations of the Zn²⁺-Hg²⁺-NO₃ ^--H₂O system by the biomass of basidiomycete (line 21 Pl. ostreatus f. florida) and by KB-4(H⁺) cation exchanger at pH 1.00 was studied. The results are discussed with regard to the state of cations in the solution before contact with the sorbent, sorbent properties, and sorption behavior of cations.     

The effect of curvature of Li-doped polycyclic hydrocarbon on its interaction energy with H<Subscript>2</Subscript> and H<Subscript>2</Subscript>O: DF-SAPT (DFT) calculation

In this work, the interaction of three Li⁺-doped polycyclic hydrocarbons (Li⁺-DPH) with H₂ and H₂O was calculated to investigate the effect of curvature of substrate on the interaction energy (E_int). For this purpose, the E_int and its decomposed energy components (electrostatic (E_elec), exchange (E_exch), induction (E_ind), and dispersion energy (E_disp)) were calculated using DF-SAPT (DFT) methodology for the selected systems (Li⁺-(3,3) carbon nanotube (Li⁺-CNT33), Li⁺-(6,6) carbon nanotube (Li⁺-CNT66), and Li⁺-graphene). According to the results, E_int does not change significantly with curvature for the interaction between both H₂ and H₂O gases and the selected Li⁺-DPH. Since the variation of the E_int with the curvature of Li⁺-DPH is not significant, the selection of a planar Li⁺-DPH is a trustworthy model to develop a general force field for describing the interaction between a Li⁺-DPH and adsorbed gases. The results reveal that, in the case of the H₂, the components E_elect, E_exch, E_ind, and E_disp have shown a decreasing trend with Li⁺-DPH’s curvature decrement. However, for the H₂O, E_elect, E_exch, and E_ind decrease from the Li⁺-CNT33 to the Li⁺-CNT66 while they increase from the Li⁺-CNT66 to the Li⁺-graphene. In this case, the E_disp increases with a decrease of the curvature of Li⁺-DPH. Finally, it can be seen that although the variation of the E_int with the curvature of Li⁺-DPH is not significant, the variation trend of the interaction energy components and the amount of variation depend on the gas molecule and in some cases are not negligible.     

Sorption of cobalt on bentonite

Sorption of Co on bentonite has been studied by using a batch technique. Distribution coefficients (K _d ) were determined for the bentonite-cobalt solution system as a function of contact time, pH, sorbent and sorbate concentration and temperature. Sorption data have been interpreted in terms of Freundlich, Langmuir and Dubinin-Radushkevich equations. Thermodynamic parameters for the sorption system have been determined at three different temperatures. The positive value of the heat of sorption, H ⁰=22.08 kJ/mol at 298 K shows that the sorption of cobalt on bentonite is endothermic, where as the negative value of the free energy of sorption, G ⁰=–10.75 kJ/mol at 298 K shows the spontaneity of the process. G ⁰ becomes more negative with an increase in temperature which shows that the sorption process is more favourable at higher temperatures. The mean free energyE7.7 kJ/mol for sorption of cobalt on bentonite shows that ion-exchange is the predominant mode of sorption in the concentration range of the metal studied i.e. 0.01 to 0.3 mol/dm³. The presence of some complementary cations depress the sorption of cobalt on bentonite in the order of K⁺>Ca²⁺>Mg²⁺>Na⁺. Some organic complexing agents and natural ligands also affect the sorption of cobalt. The desorption studies with ground water at low cobalt loadings on bentonite show that about 97% metal is irreversibly sorbed.     

Synthesis, structure, and ionic conductivity of Na5Li3Ti2S8

The compound Na₅Li₃Ti₂S₈ has been synthesized by the reaction of Ti with a Na/Li/S flux at 723 K. Na₅Li₃Ti₂S₈ crystallizes in a new structure type with four formula units in space group C2/c of the monoclinic system. The structure contains three crystallographically independent Na⁺ cations and two crystallographically independent Li⁺ cations. Na₅Li₃Ti₂S₈ possesses a channel structure that features two-dimensional layers built from Li(1)S₄ and TiS₄ tetrahedra. The layers, which are stacked along c, comprise eight-membered rings and sixteen-membered rings. Na(3)⁺ cations are located between the eight-membered rings and Na(1)⁺, Na(2)⁺, and Li(2)⁺ cations are located between the sixteen-membered rings. These cations are each octahedrally coordinated by six S²⁻ anions. The ionic conductivity σ_T of Na₅Li₃Ti₂S₈ ranges from 8.8×10⁻⁶ S/cm at 303 K to 3.8×10⁻⁴ S/cm at 483 K. The activation energy E_a is 0.40 eV.     

Thermodynamics of the System HNO3-UO2(NO3)2-H2O at 298.15 K

The sorption of ⁶⁰Co, ⁶⁵Zn, ⁷⁵Se, ¹⁰³Pd, ¹¹⁰Ag and ²⁰³Hg radionuclides by polyurethane foam (PUF) was investigated and optimized with respect to the selection of appropriate sorptive medium, metal, thiocyanate ions (except for ¹¹⁰Ag) and PUF concentration and equilibration time. The influence of common anions and cations on the sorption of each metal was examined. The sorption data subjected to different sorption isotherms have shown that the sorption of all the radionuclides followed Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The sorption capacity intensity and energy were evaluated for each element studied. The variation of sorption with temperature was monitored for all radionuclides except zinc and selenium. The values of H, S and G were estimated and found to be negative indicating exothermic and spontaneous nature of sorption. It was found that PUF is an effective and economical sorbent for traces of metal ions which can be used for the separation/preconcentration of these ions from their very dilute solutions and has useful applications in radioanalytical and environmental chemistry and in radioactive and industrial liquid waste management.     

Adsorption ability of Ga5N10 nanomaterial for removing metal ions contamination from drinking water by DFT

The electronic, magnetic, and thermodynamic properties of alkali/alkaline earth metal ion-adsorbed gallium nitride nanocage (Ga₅N₁₀_NC) have been investigated using density functional theory. The results denote that alkali/alkaline earth-metal ion-adsorbed Ga₅N₁₀_NC systems are stable compounds, with the most stable adsorption site being the center of the cage ring. The partial density of states (PDOS) can estimate a certain charge assembly between Li⁺, Na⁺, K⁺/ Be²⁺, Mg²⁺, Ca²⁺ and Ga₅N₁₀_NC which indicate the complex dominant of metallic features as: Ca²⁺ > Mg²⁺ > Be²⁺ >> K⁺ > Na⁺ > Li⁺. For confirmation of magnetic-alignment of Ga₅N₁₀_NC, monovalent (M⁺) and divalent (M²⁺) metal ions were added to the sample to measure the effects of metals on the magnetic-alignment properties of Ga₅N₁₀_NC. Furthermore, the reported results of NMR spectroscopy have exhibited that both M⁺ and M²⁺ can be optimized to achieve optimal alignment of nanocage in the presence of an applied magnetic field; however, chemical shift anisotropy spans for Ca²⁺– and Mg²⁺–containing samples is due to Ca²⁺ and Mg²⁺ ions binding to Ga₅N₁₀_NC. Regarding IR spectroscopy, Li⁺@ Ga₅N₁₀_NC and Be²⁺@ Ga₅N₁₀_NC with more electronegativity appear the most fluctuations through adsorption process. Moreover, based on NQR analysis, Ca²⁺ has shown a different graph of electric potential during trapping in Ga₅N₁₀_NC compared to other metal cations. Based on the results of $$ amounts in this research, the selectivity of metal ion adsorption by gallium nitride nanocage (ion sensor) has been approved as: K⁺>Na⁺> Li⁺ in alkali metals and Ca²⁺>Mg²⁺> Be²⁺ in alkaline earth metals.     

Heat of adsorption of carbon dioxyde and ethene on zeolites a exchanged with Li+, Ni2+ and Cu2+

Various contents of Li⁺, Ni²⁺ or Cu²⁺ were introduced in zeolite NaA by conventional cation exchange. Crystal damages are observed on samples having suffered the lowerpH. The heat of adsorption of CO₂ and C₂H₄ was determined by isothermal calorimetry. Very high initial heats (100–120 kJ mol^?1) are found in NaA as well as in Li⁺ exchanged samples, perhaps due to chemisorption on alkaline cations; they vanish when Ni²⁺ or Cu²⁺ replaces more than 20% of Na⁺, in like manner with Co²⁺ or ZnI²⁺. For the adsorption of C₂H₄, high initial heats are absent in the case of NaA, but gradually appear when divalent cations are introduced. Apart from these strong initial values, the heats of adsorption present a plateauvs. the adsorbed amount. Abnormal low values at the plateau are indicative of crystal damages.     

Quantitative structure-property relationships in the series of diazonium cations, intermediate products in the synthesis of analytical forms and dyes

It was demonstrated that the reduction potentials, dimerization potentials, and half-equivalence point potentials in the titration of aryldiazonium cations XC₆H₄N⁺N are linearly related to the quantum-chemically calculated values of electron affinities (A) and stabilization energies of radicals formed in the reduction of diazonium cations. Linear correlations between the frequencies (v) characterizing the set of stretching vibrations in the C—N⁺N fragment of XC₆H₄N⁺N cations and NN and C—N bond orders, charges on carbon atoms in the para positions of aromatic rings of C₆H₅X molecules, and mesomeric dipole moments (µ_m) of substituents X were found. Quantitative relationships relating µ_m and v to A were revealed. These relationships have clear physical meaning, are characterized by relatively large correlation coefficients, and possess predictive power for redox properties, electron affinity, and vibrational spectra of aryldiazonium cations and mesomeric dipole moments of atomic groups in organic molecules.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 2, 2005, pp. 149–156. Original Russian Text Copyright © 2005 by Pankratov.     

Zeolite ZSM-5 containing copper ions: The effect of the copper salt anion and NH<Subscript>4</Subscript>OH/Cu<Superscript>2+</Superscript> ratio on the state of the copper ions and on the reactivity of the zeolite in DeNO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Isotherms of copper cation sorption by H-ZSM-5 zeolite from aqueous and aqueous ammonia solutions of copper acetate, chloride, nitrate, and sulfate are considered in terms of Langmuir’s monomolecular adsorption model. Using UV-Vis diffuse reflectance spectroscopy, IR spectroscopy, and temperatureprogrammed reduction with hydrogen and carbon monoxide, it has been demonstrated that the electronic state of the copper ions is determined by the ion exchange and heat treatment conditions. The state of the copper ions has an effect on the redox properties and reactivity of the Cu-ZSM-5 catalysts in the selective catalytic reduction (SCR) of NO with propane and in N₂O decomposition. The amount of Cu²⁺ that is sorbed by zeolite H-ZSM-5 from aqueous solution and is stabilized as isolated Cu²⁺ cations in cationexchange sites of the zeolite depends largely on the copper salt anion. The quantity of Cu(II) cations sorbed from aqueous solutions of copper salts of strong acids is smaller than the quantity of the same cations sorbed from the copper acetate solution. When copper chloride or sulfate is used, the zeolite is modified by the chloride or sulfate anion. Because of the presence of these anions, the redox properties and nitrogen oxides removal (DeNO _x ) efficiency of the Cu-ZSM-5 catalysts prepared using the copper salts of strong acids are worse than the same characteristics of the sample prepared using the copper acetate solution. The addition of ammonia to the aqueous solutions of copper salts diminishes the copper salt anion effect on the amount of Cu(II) sorbed from these solutions and hampers the nonspecific sorption of anions on the zeolite surface. As a consequence, the redox and DeNO _x properties of Cu-ZSM-5 depend considerably on the NH₄OH/Cu²⁺ ratio in the solution used in ion exchange. The aqueous ammonia solutions of the copper salts with NH₄OH/Cu²⁺ = 6–10 stabilize, in the Cu-ZSM-5 structure, Cu²⁺ ions bonded with extraframework oxygen, which are more active in DeNO _x than isolated Cu²⁺ ions (which form at NH4OH/Cu2+ = 30) or nanosized CuO particles (which form at NH₄OH/Cu²⁺ = 3).     

Synthesis and crystal structures of 2,4,6-pyridine-tricarboxylic anions/guanidinium and tetraalkylammonium inclusion compounds

Two different hydrogen-bonded inclusion compounds, [2,4,6-C₅H₂N(COO^?)₃]_0.5·[C(NH₂) ₃ ⁺ ]_0.5·[(C₂H₅)₄N⁺]·2H₂O (1) and [2,4,6-C₅H₂N(COO^?)₃]·[C(NH₂) ₃ ⁺ ]·[(C₂H₅)₄N⁺]·[(C₃H₇)₄N⁺]·6H₂O (2) are reported in this paper, in which 2,4,6-pyridine-tricarboxylic anions, guanidiniums and water molecules jointly construct host lattices while tetraalkylammonium cations are accommodated as guest species. Both two compounds formed sandwich-like hydrogen-bond inclusion compounds. In compound 1, the dimers composed of 2,4,6-pyridine-tricarboxylic anions and guanidiniums form 2D hydrogen-bonded layers by connecting with water molecules. In compound 2, 2,4,6-pyridine-tricarboxylic anions, guanidiniums and water molecules contribute to generate an undulate rosette hydrogen-bonded architecture. Interestingly, in compound 2, there are two species of guest molecules, tetraethylammonium and tetrapropylammonium, which are alternately arranged between the neighboring layers. Mixed guest cations accommodated in hydrogen-bonded inclusion compounds are seldom seen.     

Variation of the composition and properties of lithium manganese oxide spinel in lithiation-delithiation cycles

The behavior of the variable-composition spinel Li_{1 + x} Mn_{2 ? x} O₄ is examined in repeated cycles consisting of lithiation in 0.2 M LiOH and delithiation in 0.3 M HNO₃. For 0 < x < 0.33, delithiation is accompanied by the redox reaction 2Mn³⁺ → Mn⁴⁺ + Mn²⁺ and Li⁺ ? H⁺ ion exchange. The spinel undergoes partial conversion into λ-□MnO₂. Vacancies (□) build up at the 8a sites of the spinel structure. Mn²⁺ ions pass into the solution, and, accordingly, the spinel dissolves. Lithiation is accompanied by the redox reaction 4Mn⁴⁺ → 3Mn³⁺ + Mn⁷⁺ and ion exchange, and the proportion of vacancies □ at the 8a sites of the spinel structure decreases. The spinel undergoes partial dissolution because of Mn²⁺ and MnO _? ⁴ ions passing into the solution. The Li⁺ selectivity of the spinel is the property of the crystallite core. The crystallite surface is capable of sorbing Na⁺ ions.     

Effect of ion-exchanged alkali metal cations on the photolysis of 2-pentanone included within ZSM-5 zeolite cavities: a study of ab initio molecular orbital calculations

The Norrish Type I and Type II reactions in the photolysis of 2-pentanone included within the alkali metal cation-exchanged ZSM-5 zeolite have been investigated by experimental and theoretical approaches. Changes in the molecular environment of the zeolite cavities by exchanging the cations had significant effects not only on the adsorption state but also on the photochemical reactions of the ketones included within the zeolite cavities. The yields of the photolysis decreased and the ratio of the Type I/Type II reactions increased, respectively, by changing the ion-exchanged cations from Cs⁺ to Li⁺. The observed IR and phosphorescence spectra of the adsorbed ketones and the ab initio molecular orbital calculations of this host-guest system indicate that the ketones interact with two different adsorption sites, i.e. the surface OH groups and alkali metal cations, while the interaction between the ketones and cations increased by changing the cations from Cs⁺ to Li⁺. Molecular orbital calculations were also carried out and indicated that the zeolite framework promotes the delocalization of the charge density of the alkali metal cations which can modify the interaction between the adsorbed ketones and cations, resulting in significant changes in the photolysis of these ketones.     

Reindarstellung und Kristallstruktur von Lithiumnitridhydrid,Li4NH,Li4ND

Preparation and Crystal Structure of Lithium Nitride Hydride, Li₄NH, Li₄ND Single phase Li₄NH was prepared by the reaction of Li₃N and LiH at 490°C. Its structure has been solved from x-ray and time-of-flight neutron powder diffraction data. Li₄NH crystallizes in an ordered variant of the Li₂O structure. N and H occupy the sites of two interpenetrating “extended” diamond lattices. Li occupies all N₂H₂ tetrahedral voids and is found to be shifted into a N₂H tetrahedral face. As a result H is in compressed tetrahedral coordination by Li, while N is in bisdisphenoidal coordination by Li. Alternatively, the Li₄NH structure may be regarded as a [Li₄N]⁺threedimensional net, its voids being filled up with H^?. Li₄NH is a reactive solid, which decomposes to imide when in contact with N₂ or H₂ at some 400°C.     

Partial exchange of the Li, Na and K alkaline cations in the HNi(PO4)·H2O layered compound

The exchange of the Li⁺(1), Na⁺(2) and K⁺(3) alkaline cations in the layered HNi(PO₄)·H₂O was carried out starting from a methanolic solution containing the Li(OH)·H₂O hydroxide for (1) and the M(OH) (M=Na and K) hydroxides together with the (C₆H₁₃NH₂)_0.75HNiPO₄·H₂O phases for (2) and (3). The compounds are stable until, approximately, 280 °C for (1) and 400 °C for phases (2) and (3), respectively. The IR spectra show the bands belonging to the water molecule and the (PO₄)³⁻ oxoanion. The diffuse reflectance spectra indicate the existence of Ni(II), d⁸, cations in slightly distorted octahedral geometry. The calculated Dq and Racah (B and C) parameters have a mean value of Dq=765, B=905 and , respectively, in accordance with the values obtained habitually for this octahedral Ni(II) cation. The study of the exchange process performed by X-ray powder diffraction indicates that the exchange of the Li⁺ cation in the lamellar HNi(PO₄)·H₂O phase is the minor rapid reaction, whereas the exchange of the Na⁺ and K⁺ cations needs the presence of the intermediate (C₆H₁₃NH₂)_0.75HNiPO₄·H₂O intercalate in order to obtain the required product with the sodium and potassium ions. The Scanning electronic microscopy (SEM) images show a mean size of particle of 5 μm. The Li⁺ exchanged compound exhibits small ionic conductivity (Ω cm⁻¹ is in the 10⁻⁸-10⁻⁹ range) probably restrained by the methanol solvent. Magnetic measurements carried out from 5 K to room temperature indicate antiferromagnetic coupling as the major interaction in the three phases. Notwithstanding the Li and K phases show a weak ferromagnetism at low temperatures.     

Zur Koordinationschemie des Rhenium(VII). V. Trioxo-trichlororhenate(VII) mit stickstoffhaltigen Kationen

Coordination Chemistry of Rhenium(VII). V. Trioxotrichlororhenates(VII) with Nitrogen-containing Cations Complex compounds of the composition A₂ReO₃C₃ were obtained by reaction of ReO₃Cl with the chlorides ACl (A = (CH₃)₄N⁺, (C₂H₅)₄N⁺, PyH⁺, ChinH⁺ (CH₃)₃NH⁺ and CH₃Py⁺) in inert solvents. It has been decuced from the Re? O stretching vibrations of the IR spectra, that the anion ReO₃Cl in connection with the cations (CH₃)₄N⁺ resp. (C₂H₅)₄N⁺ has the symmetry C_3v (cis-configuration). It is probable, that in cations including a NH-group a decrease of the symmetry towards C_s arises by means of the hydrogen bondings.     

Theoretical study of interaction of 2,6-dithiopurine with Li+, Na+, K+, Be2+, Mg2+, and Ca2+ metal cations

The geometries of the complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with different possible 2,6-dithiopurine anions (DTP) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d, p) basis set. The interactions of the metal cations at different nucleophilic sites of various possible 2,6-dithiopurine anions were considered. It was revealed that metal cations would interact with 2,6-dithiopurine anions in a bicoordinate manner. In the gas phase, the most preferred position for the interaction of Li⁺, Na⁺, and K⁺ cations is between the N₃ and S₂ sites, while all divalent cations Be²⁺, Mg²⁺, and Ca²⁺ prefer binding between the N₇ and S₆ sites of the corresponding 2,6-dithiopurine. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi’s polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between 2,6-dithiopurine anions and the metal cations. It was revealed that aqueous solution would have significant effect on the relative stability of complexes obtained by the interaction of 2,6-dithiopurine anions with Mg²⁺ and Ca²⁺ cations. The effect of metal cations on different NH and CS stretching vibrational modes of 2,6-dithiopurine has also been discussed.