Laser-controlled switching of dc or rf signals up to the GHz range: A new field of laser application

A new technique for high-speed optoelectronic modulation and switching of dc or rf signals up to the GHz range, using ‘fast’ laser-controlled silicon microstrip devices, has been developed. The technique is based on well known applications of photosensitive CdS or Si devices as switching or triggering elements in ‘slow’ circuitry. The switching actions are achieved via laser- excited highly conductive solid-state plasmas. Applying nanosecond or picosecond laser pulses permits dc pulses or microwave pulses as short as a single cycle to be generated, demonstrating the practical significance of laser application in future pulse shaping and sampling techniques.     

Optimization of type-II frequency doubling of spatial and temporal limited laser light in nonlinear crystals

Type-II frequency doubling of short Gaussian laser pulses is studied theoretically. The situation is analysed when the group velocity mismatch and the walk-off angle of the interacting waves limit the frequency conversion efficiency. It is shown that with collinear ‘o’ and ‘e’ polarized fundamental waves a temporal and spatial separation of the fundamental beams is necessary to compensate for both effects. Results of the presented model are discussed for KDP crystals.     

Radiation effects in concentrated alloys and compounds: equilibrium and kinetics of driven systems

What organization of condensed matter does resist irradiation, as a function of irradiation conditions? How to characterize the latter? We survey the advances in the field during the past three decades, when irradiation effects reduce to nuclear collisions. While in simple cases (structure defined by a scalar order parameter) one may define a stochastic potential, which yields the stationary states of the compounds under irradiation and their respective stability, in more general cases, we are left with brute force atomistic simulations to explore materials' behaviour as a function of irradiation conditions. Special attention is given to the kinetics of concentration fields under irradiation, a question with several practical implications. We conclude that irradiation conditions are best defined by three parameters: the cascade features (number of displacements and replacements, length of replacement sequences, …), the frequency of cascade occurrence, and the cumulated dose. We suggest cascade features be named ‘(elementary) dose’ and the cascade occurrence frequency ‘dose rate’. To cite this article: G. Martin, P. Bellon, C. R. Physique 9 (2008).     

Formation of the nanodots and change of the characteristics of thin magnetic films under laser irradiation

Results of experimental investigations of laser radiation interaction with the Ti, Co, NiFe, TbFe and LaSrMnO₃ films are presented. It is shown, that it is possible to improve magnetic characteristics and to obtain magnetic films with regular distribution of nanodots by the laser radiation. It is observed an increasing of magnetic permeability and the reduction of the coercive force after irradiation of the NiFe films by the nanosecond laser pulses that are induced by the substantial growth of the size of the nanodots in the process of recrystallization. Magnetic nanodots of 100–200 nm size are produced by the method of the laser cutting of the continuous magnetic films, or are formed in a nonmagnetic matrix by the diffusion in the multilayered films and oxidization of TbFe and LaSrMnO_3−x films at the irradiation of the nanosecond laser pulses.     

On the environmental decoherence and spin interference in mesoscopic loop structures

Mechanisms of ‘environmental decoherence’ such as surface scattering, Elliot–Yafet process and precession mechanisms, as well as their influence on the spin phase relaxation are considered and compared. It is shown that the ‘spin ballistic’ regime is possible, when the phase relaxation length for the spin part of the wave function (L^(s)) is much greater than the phase relaxation length for the ‘orbital part’ (L^(e)). In the presence of an additional magnetic field, the spin part of the electron's wave function (WF) acquires a phase shift due to additional spin precession about that field. If the structure length L is chosen to be L^(s)>L>L^(e), it is possible to ‘wash out’ the quantum interference related to the phase coherence of the ‘orbital part’ of the WF, retaining at the same time that related to the phase coherence of the spin part and, hence, to reveal corresponding conductance oscillations.     

New Developments in the Eight Vertex Model II. Chains of Odd Length

We study the transfer matrix of the 8 vertex model with an odd number of lattice sites N. For systems at the root of unity pointsη=mK/L with m odd the transfer matrix is known to satisfy the famous ‘‘TQ’’ equation where Q(υ) is a specifically known matrix. We demonstrate that the location of the zeroes of this Q(υ) matrix is qualitatively different from the case of evenN and in particular they satisfy a previously unknown equation which is more general than what is often called ‘‘Bethe’s equation.’’ For the case of even m where no Q(υ) matrix is known we demonstrate that there are many states which are not obtained from the formalism of the SOS model but which do satisfy the TQ equation. The ground state for the particular case of η=2K/3 and N odd is investigated in detail.     

Stretched exponential relaxation and dispersive conductivity behavior in lithium bismuth silicate glasses

Glasses having compositions xLi₂O∙(85 − x)Bi₂O₃∙15SiO₂ (x = 35, 40, and 45 mol%) were prepared by normal melt quenching technique. Electrical relaxation and conductivity in these glasses were studied using impedance spectroscopy in the frequency range from 20 Hz to 1 MHz and in the temperature range from 453 to 603 K. The ac and dc conductivities, activation energy of the dc conductivity and relaxation frequency were extracted from the impedance spectra. The dc conductivity increases with increase in Li₂O content providing modified glass structure and large number of mobile lithium ions. Similar values of activation energy for dc conduction and for conductivity relaxation time indicate that the ions overcome the same energy barrier while conducting and relaxing. The non-exponential character of relaxation processes increases with decrease in stretched exponential parameter ‘β’ as the composition parameter ‘x’ increases. The observed conductivity spectra follow a power law with exponent ‘s’ which increases regularly with frequency and approaches unity at higher frequencies. Nearly constant losses (NCL) characterize this linearly dependent region of the conductivity spectra. A deviation from the ‘master curve’ for various isotherms of conductivity spectra was also observed in the high-frequency region and at low temperatures, which supports the existence of different dynamic processes like NCL in addition to the ion hopping processes in the investigated glass system.     

Processing of W/Si and Si/W bilayers and multilayers with single and multiple excimer-laser pulses

Interdiffusion phenomena, thermal damage and ablation of W/Si and Si/W bilayers and multilayers under XeCl-excimer laser (=308 nm) irradiation at fluences of 0.15, 0.3 and 0.6 J/cm² were studied. Samples were prepared by UHV e-beam evaporation onto oxidized Si. The thickness of W and Si layers and the total thickness of the structures were 1–20 nm and 40–100 nm, respectively. 1 to 300 laser pulses were directed to the same irradiation site. At 0.6 J/cm² the samples were damaged even by a single laser pulse. At 0.3 J/cm² WSi₂ silicide formation, surface roughening and ablation were observed. The threshold for significant changes depends on the number of pulses: it was between 3–10 pulses and 10–30 pulses for bilayers with W and Si surfaces, respectively, and more than 100 pulses for multilayers with the same total thickness of tungsten. At 0.15 J/cm² the periodicity of the multilayers was preserved. Temperature profiles in layered structures were obtained by numerical simulations. The observed differences of the resistance of various bilayers and multilayers against UV irradiation are discussed.     

Holography and electronic speckle pattern interferometry in geophysics

Geophysical applications of holography and ESPI are reviewed. First, laboratory experiments of rock deformation and failure with holographic interferometry and holographic in situ stressmeters are briefly summarized. Then, holographic measurements of tunnel deformations made in Japan are described. The holographic recording system, consisting of an He---Ne gas laser and associated optical elements, was installed in a tunnel at the Amagase Crustal Movement Observatory, Japan in 1984. Tunnel deformations caused by tidal and tectonic forces have been precisely determined using the ‘real-time’ technique of holographic interferometry. Finally, some attempts to apply ESPI to geophysical measurements are introduced.     

Generation of picosecond and subpicosecond light pulses with saturable absorbers

Single light pulses, generated by a mode-locked Nd-glass laser, were shortened with saturable absorbers of low initial transmissionT ₀. The pulse duration was reduced from 8 to 2.6 ps after a single pass through a dye cell ofT ₀=10^–7. Light pulses as short as 0.5 ps were observed after five transits through an absorberamplifier system. Detailed calculations of the stationary and the transient situation (with respect to the dye relaxation time) are presented to demonstrate optimum conditions for the pulse shortening.     

Far infrared sub-nanosecond pulse generation in GaP with a time-synchronized mode-locked double-frequency Nd: Glass laser system

Light pulses of 149 m wavelength and 700 ps duration are generated by non-collinear phase-matched difference frequency mixing of laser pulses at 1053.5 and 1061 nm in a (110) cut GaP crystal. The pump laser pulses are generated in a time-synchronized mode-locked double-frequency Nd:glass laser system consisting of a silicate glass branch and a phosphate glass branch. A photon conversion efficiency of 4 × 10^–6 is achieved. The non-linear susceptibility constant of GaP is determined to be d ₁₄ = (10 ± 1) pm V^–1.     

Global noise characteristics of a laser Doppler vibrometer-II. Experiments using beam dynamics

The use of a laser Doppler vibrometer to obtain velocity information from vibrating structures has gained wide acceptance in recent years. Although use of such an instrument can yield a spatially dense matrix of velocity information, several users have noted ‘noise’ at certain points in the spatial field. The technique by which the SLDV system operates results in occasional velocity ‘drop-outs’ which are unidirectional, always estimating the velocity response closer to zero than reality. These ‘drop-out’ areas occur more predominately at points of maximum velocity response with small rotational components. Alternatively, points exhibiting minimum velocity response with large rotational components are less susceptible to the ‘noise’. In this paper, an experiment to visualize the speckle pattern motions received by the photo-detectors during these vibration conditions is presented. Theories regarding the source(s) of the ‘noise’ are developed.     

High-p jets in diffractive electroproduction

The diffractive production of high-p jets in deep-inelastic scattering is studied in the semiclassical approach. The p-spectra of and diffractive final states are found to be qualitatively different. For fina states, which are produced by ‘hard’ colour-singlet exchange, the p-spectrum is much softer than for final states, where the colour neutralization is ‘soft’. Furthermore, the two different final states can be clearly distinguished by their diffractive mass distributions.     

The Order Parameter of the Chiral Potts Model

An outstanding problem in statistical mechanics is the order parameter of the chiral Potts model. An elegant conjecture for this was made in 1983. It has since been successfully tested against series expansions, but there is as yet no proof of the conjecture. Here we show that if one makes a certain analyticity assumption similar to that used to derive the free energy, then one can indeed verify the conjecture. The method is based on the ‘‘broken rapidity line’’ approach pioneered by Jimbo et al. (J. Phys. A 26:2199--2210 (1993).).     

Prepulse dependence ofJ=0−1 lasing at 32.6 nm in neon-like titanium

The dependence of the intensity of the 3p—3s,J = 0–1 lasing line at 32.6 nm in neon-like titanium on the prepulse level has been investigated experimentally. Titanium slabs were irradiated with 1.315 µm/450 ps pulses from the Asterix IV iodine laser using a defined prepulse of 5.2 ns before the main pulse. It is found that for pump energies close to the minimum energy for which lasing is observed, a prepulse level of order 0.5% gives the highest XUV laser intensity, whereas a higher prepulse level, of order 10% and more, is required for optimum XUV lasing far above the threshold. For a 2.7 cm long titanium target lasing was observed down to a pump irradiance of 2.5 TW/cm² (50 J/450 ps) for the 0.5% prepulse.     

Dark matter problem and effective curvature Lagrangians

A ‘radical’ conservative unifying model of scalar dark matter and modified gravity is proposed here. After a conformal mapping, the dependence of the effective Lagrangian on the curvature is not only singular but also bifurcates into several almost Einsteinian spaces, distinguished only by a different gravitational strength and cosmological constant. A swallow tail or butterfly catastrophe in the bifurcation set indicates the possibility for the coexistence of different Einsteinian domains in our Universe. This finding may shed new light on the nature and large scale distribution not only of dark matter but also on ‘dark energy’, regarded as an effective cosmological constant.     

Phase-stepping interferometry: Five-frame algorithm with an arbitrary step

The present paper offers a new formula for calculating the phase in interferometric measurements by the phase-stepping method. The proposed five-frame algorithm utilizes equal phase steps with an arbitrary value. Results are presented on computer simulation of the errors occurring at a phase-step different from 90 ° and due to vibrations in the system ‘interferometer-object’.     

Development of ultra-short pulse VUV laser system for nanoscale processing

We have developed intense vacuum ultraviolet (VUV) radiation sources for advanced material processing, such as photochemical surface reactions and precise processing on a nanometer scale. We have constructed a new VUV laser system to generate sub-picosecond pulses at the wavelength of 126 nm. A seed VUV pulse was generated in Xe as the 7th harmonic of a 882-nm Ti:sapphire laser. The optimum conversion was achieved at the pressure of 1.2 Torr. The seed pulse will be amplified by the Ar₂^*\mathrm{Ar}_{2}^{*} media generated by an optical-field-induced ionization Ar plasma produced by the Ti:sapphire laser. We have obtained a gain coefficient of g=0.16 cm⁻¹. Our developing system will provide VUV ultra-short pulses with sub-μJ energy at a repetition rate of 1 kHz.     

Implementation of controlled phase shift gates and Collins version of Deutsch-Jozsa algorithm on a quadrupolar spin-7/2 nucleus using non-adiabatic geometric phases

In this work controlled phase shift gates are implemented on a qaudrupolar system, by using non-adiabatic geometric phases. A general procedure is given, for implementing controlled phase shift gates in an ‘N’ level system. The utility of such controlled phase shift gates, is demonstrated here by implementing 3-qubit Deutsch–Jozsa algorithm on a spin-7/2 quadrupolar nucleus oriented in a liquid crystal matrix.     

Amplification in Ni-like Nb at 204.2 Å pumped by a table-top laser

We identified for the first time the 3d ⁹4d ¹ S – 3d ⁹4p ¹ P line in Ni-like Nb at 204.2 Å that was predicted to show gain. When pumped with a train of pulses containing less than 1 J per pulse, significant emission was recorded at 204.2 Å following the second and the third pulses. We measured the small signal gain coefficient per Joule of incident laser energy to be 1.49±0.42 cm^–1 J^–1 for this laser transition, which is higher by several orders of magnitude than that reported for other collisional laser systems in this wavelength range.