Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.     

An evaluation of some commercial lead(II)-selective electrodes

Two types of commercial lead(II)-selective electrode, the Orion 94-82 and the R??i?ka lead Selectrode, are compared. Calibration curves were determined in both buffered and unbuffered lead-ion solutions repeatedly for several weeks. Selectivities with respect to copper(II), silver(I), mercury(II), iron(III), zinc and cadmium were examined as well as the pH response by the mixed solution method. The response times of the electrodes were also studied.     

Metal ion capillary zone electrophoresis with direct UV detection: Separation of metal cyanide complexes

Mixtures of cyanide complexes of iron(III), copper(I), iron(II), nickel(II), chromium(III), mercury(II), palladium(II), silver(I), cadmium(II), zinc(II), cobalt(II), and cobalt(III) have been separated by capillary zone electrophoresis using a fused silica capillary and 20 mM phosphate buffers containing 1–2 mM sodium cyanide. The complexes were detected by direct UV absorpticn at 214 nm; detection limits are in the mid ppb range for all metals except cadmium and zinc. The different detectability of various metal cyanide complexes enables the application of the method to the analysis of complex matrices such as cyanide plating bath solutions.     

Hexacyanoferrate-based composite ion-sensitive electrodes for voltammetry

Composite electrodes made of graphite, paraffin and metal hexacyanoferrates exhibit a voltammetric response of the hexacyanoferrate ions, the potential of which depends linearly on the logarithm of concentration of alkali and alkaline-earth metal ions. This behaviour has been observed on account of the fact that the electrochemical reaction is accompanied by an exchange of these ions between the solution and the zeolitic lattice of the hexacyanoferrates for charge compensation. The voltammetric determination of the formal potential of these electrodes in a solution allows the quantitative analysis of the ions which are exchanged between the metal hexacyanoferrates and the aqueous solutions. Iron(III), copper(II), silver(I), nickel(II) and cadmium(II) hexacyanoferrates have been studied for the determination of H(+), Li(+), Na(+), K(+), Rb(+), Cs(+), NH(+)(4), Mg(2+), Ca(2+) and Ba(2+). In some cases, the selectivity constants are as low as 3.10(-4), or even so small that their exact value is inaccessible. Electrodes made of iron (III), copper (II), silver (I), nickel (II) and cadmium (II) hexacyanoferrates are most suitable for the determination of potassium ions. Electrodes with nickel (II) and cadmium (II) hexacyanoferrates are also suitable for the determination of caesium ions. The working range of the electrodes also depends on the conductivity of the solutions and can range from 10(-5) to 1 mol l(-1). Typical standard deviations of the potential measurements are 3 mV.     

Stability constants of some metal dithizonates

The overall stability constants of electroneutral dithizonates of bismuth, cadmium, cobalt(II), copper(II), iron(II), lead(II), manganese(II), mercury(II), nickel, palladium(II), silver, tin(II) and zinc were determined by means of stoichiometric dilution in aqueous solution stabilized by hydroxylamine hydrochloride, at pH 5.50-10.02. Stability constants of complexes ML of bivalent metals were determined under similar conditions but with an excess of metal.     

1,3-pyrimidinyl(2,4,6-pyrimidine trione) and its metal chelates

Summary A new tetradentate ligand 1,3-pyrimidinyl(2,4,6-pyrimidine trione) and its chromium(III), manganese(II), iron(III), cobalt(II), nickel(II), copper(II), zinc(II) and cadmium(II) complexes have been prepared and characterized by elemental analysis, magnetic susceptibility measurements, and electronic and i.r. spectra. Conductivity measurements show the complexes to be non-electrolytes. An octahedral geometry for trivalent ions [iron(III) and chromium(III)] has been proposed, whereas all divalent metal ions, except for copper(II), appear to be tetrahedral. The 10 Dq values suggest that the ligand is as strong as ethylenediamine. The values indicate a considerable orbital overlap in the metal-ligand bond.     

Analytical procedure for the simultaneous voltammetric determination of toxic metals in dialysis fluids

A new analytical voltammetric procedure for the simultaneous determination of copper(II), lead(II), cadmium(II), zinc(II), chromium(VI), and manganese(II) in two kinds of dialysis fluid (peritoneal and haemodialysis fluids) is described. The voltammetric measurements were performed using, as working electrode, a stationary mercury electrode, and a platinum electrode and a Agmid R:AgClmid R:KCl ((sat.)) electrode as auxiliary and reference electrodes, respectively, employing 0.1 mol L(-1) dibasic ammonium citrate solution pH 6.9 as supporting electrolyte. For all the elements, the accuracy, expressed as relative recovery R%, was very satisfactory being in the range 94-105%, the precision, expressed as relative standard deviation s(r)%, was lower than 6%, while the limits of detection were of the order of a few units of microg L(-1). The analytical voltammetric procedure has been validated by comparison with spectroscopic (graphite furnace atomic absorption spectroscopy, GFAAS) measurements.     

Use of arsenite reduction in potentiometric methods for arsenic(III) or higher valent lead,manganese, chromium,and vanadium in some industrial products

A simple, rapid, and reliable method is given for determination of As(III) based on arsenite reduction of alcoholic iodine and titration of the equivalent iodide with Hg(II) using silver amalgam as the indicator electrode. Arsenite reduction is applied to the estimation of lead in minium, manganese in duralumin, chromium in zinc chromate, and vanadium and chromium in ilmenite, the excess of arsenite being determined by the same method used for As(III). The endpoints are accurately determined with very satisfactory potential breaks.     

Lead-selective electrodes based on lead(IV) oxide

Lead(IV) oxide electrodes are shown to give near-theoretical calibration slopes for lead(II) ions over the range 10^?3–10^?5 mol l^?1, and to have near-theoretical standard potentials in different acidic media. They are compared with lead sulphide-silver sulphide membrane electrodes and shown to be more tolerant of acidity and copper(II), mercury(II) and iron(III) ions. Iron(II) and manganese(II), however, interfere significantly. Some of the advantages of the lead(IV) oxide electrode are brought out in the determination of the solubility product of lead sulphate; implications for constructing phosphate- and sulphate-sensitive electrodes are mentioned.     

A new selective and high affinity polymeric complexing agent for transition metal ions

Summary The synthesis and characteristics of a new chelating glycinohydroxamate-containing polymer resin is described. The functionality of the polymer is 1.76 mmolg^–1. The hydrogen capacity, water regain and adsorption capacities for iron(III), cadmium(II), cobalt(II), copper(II), nickel(II) and zinc(II) were measured at various pH values; uptake of the metal ions increased with pH and was quantitative above pH 3 for most of the metal ions. All cations studied showed high exchange rates towards the resin. The half saturation times for iron(III), cadmium(II), copper(II) and zinc(II) were all less than 1 min. The coordination behaviour of the resin was studied with the help of e.p.r., i.r., u.v. and potentiometry. The pK _a of the resin is 10.70 and the log value of the stability constants for iron(III), copper(II), lead(II), zinc(II), cobalt(II), manganese(II), cadmium(II) and nickel(II) were measured as 21.81, 19.50, 19.20, 18.59, 18.51, 18.46, 18.37 and 18.36, respectively, at 25 ° C and I = 0.2M KCl.     

Complexing properties of N-2-sulfoethyl chitosans

For a new sulfoethylated chitosan derivative with the degree of substitution of amino group hydrogen atoms of 0.5, the dissociation constant of functional groups has been determined by potentiometric titration. Complexing properties of sulfoethylated chitosan toward copper(II), cobalt(II), nickel(II), zinc(II), manganese(II), cadmium(II), silver(I), lead(II), magnesium(II), calcium(II), strontium(II), and barium(II) ions have been studied potentiometrically. Alkaline earth and magnesium ions do not form complexes with sulfoethylated chitosan. For the other ions, stability constants of the resulting complexes have been determined. The most stable N-2-sulfoethyl chitosan complexes are those with copper(II) and silver(I) ions.     

Synthesis, characterization and analytical application of a hydroxamic acid resin

A chelating ion-exchange resin with hydroxamic acid functional groups was synthesized from styrene-maleic acid co-polymer cross-linked with divinylbenzene. A resin prepared from equimolar amounts of styrene and maleic anhydride with 0.75 mole% divinylbenzene gives the best sorption characteristics. The selectivity of the resin for metal ions is copper(II) > cobalt(II) > zinc(II) > nickel(II) > manganese(II) > chromium(III) > iron(III) > vanadium(V). Copper(II), chromium(III) and iron(III) in chromium plating baths can be separated by use of the resin and determined spectrophotometrically.     

Potentiometric study of complexation between taurine and metal ions

The protolytic and complexation properties of taurine are studied by a potentiometric method. The dissociation constants of 2-aminoethanesulfonic acid functional groups and the stability constants of taurine complexes with copper(II), cobalt(II), nickel(II), zinc(II), manganese(II), cadmium(II), silver(I), magnesium(II), calcium(II), strontium(II), and barium(II) ions are calculated.     

Solid State Conductivity and Catalytic Activity of Hexacyanoferrate(II)–Thiosemicarbazide Complexes of 3d-Metals

The temperature dependence of the resistivity of tablets of hexacyanoferrate(II)–thiosemicarbazide complexes of chromium(III), manganese(II), iron(III), cobalt(III), nickel(II), copper(II), and zinc(II) was measured in the range 20-90 °C. A relationship between the conductivity of a substance and the rate constant for the catalytic decomposition of hydrogen peroxide is established.     

The application of 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane to the extraction of metal ions

The use of 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (Tet) in chloroform solutions provides quantitative extraction of lead(II), cadmium(II), copper(II) and zinc(II) at different pH values from solutions containing perchlorate and cyclohexanecarboxylic acid. Nickel(II) and cobalt(II) ions are not extracted quantitatively. Single extractions of mixtures of copper with transition metals gave the best separations for the copper/nickel system. Separations of copper from cobalt, lead, manganese and iron were less satisfactory.     

Determination of trace chromium(VI) by an inhibition-based enzyme biosensor incorporating an electropolymerized aniline membrane and ferrocene as electron transfer mediator

A novel inhibition-based glucose oxidase (GOx) biosensor for environmental chromium(VI) detection is described. An electropolymerized aniline membrane has been prepared on a platinum electrode containing ferrocene as electron transfer mediator, on which GOx is cross-linked by glutaraldehyde. The mechanism of the redox reaction on the electrode and the performance of the sensor are studied. The sensor's response to glucose decreases when it is inhibited by chromium(VI), with a lower detection limit of 0.49?µg?L^?1, and the linear response range is divided into two parts, one of which is 0.49–95.73?µg?L^?1 and the other is 95.73?µg^?1 to8.05?mg?L^?1. The enzyme membrane is shown to be completely reactivated after inhibition, retaining 90% activity over more than forty days. Interference to chromium(VI) determination from lead(II), copper(II), cadmium(II), chromium(III), cobalt(II), tin(II) and nickel(II) is found to be minimal, while high concentrations of mercury(II) and silver(I) may interfere with the determination of trace chromium(VI). The sensor has been used for chromium(VI) determination in soil samples with good results.     

Application of multifunction group-containing ion exchange fibres for purification of waste water

The multifunction groups-containing ion exchange fibre is an amphoteric ion exchanger. It has high sorption capacities and good kinetic properties for the extraction of heavy metals. It might be an effective tool for removal and concentration of copper, cadmium, chromium, cobalt, nickel, lead, mercury, zinc and manganese.     

The determination of some toxic metals in human liver as a guide to normal levels in New Zealand. Part I. Determination of Bi, Cd, Cr, Co, Cu, Pb, Mn, Ni, Ag, T1 and Zn.

Procedures are described for the determination of bismuth, cadmium, chromium, cobalt, copper, lead, manganese, nickel, silver, thallium and zinc in post-mortem liver samples by atomic absorption spectrometry. The technique involves a simple HCl/HNO₃ digestion at 100 ±20 °C, gives good recoveries and appears to be applicable to other tissues, and blood. Results of analyses of post-mortem material from eleven subjects with no known exposure to toxic metals, are presented. They are comparable with overseas findings and show no excessive levels.     

Thermal decomposition of some divalent metal selenates

Thermogravimetry, differential thermal analysis and differential thermogravimetry have been used to study the decomposition of hydrated selenates of manganese(II), cobalt, nickel, copper(II), zinc and cadmium. Based on the results obtained, mechanisms of decomposition have been proposed. The decomposition temperatures of non-hydrates show a gradual increase from manganese(II) selenate to zinc selenate and then a sudden drop for cadmium selenate.     

Analytical applications of a liquid anion-exchanger for the separation of uranium(IV) in malonate solution

Uranium was quantitatively extracted with 4% Amberlite LA-1 in xylene at pH 2.5-4.0 from 0.001 M malonic acid. It was stripped from the organic phase with 0.01 M sodium hydroxide and determined spectrophotometrically at 530 nm as its complex with 4-(2-pyridylazo) resorcinol. Of various liquid anion-exchangers tested, Amberlite LA-1 was found to be best. Uranium was separated from alkali and alkaline earth metal ions, thallium(I), iron(II), silver, arsenic(III) and tin(IV) by selective extraction, and from zinc, cadmium, nickel, copper(II), cobalt(II), chromium(III), aluminium, iron(III), lead, bismuth, antimony(III) and yttrium by selective stripping. The separation from scandium, zirconium, thorium and vanadium(V) was done by exploiting differences in the stability of chloro-complexes.