Design of a compact polarization splitter based on the dual-elliptical-core photonic crystal fiber

We propose a compact polarization splitter based on dual-elliptical-core photonic crystal fiber. Two elliptical cores are introduced to increase the difference of effective index between x-polarized and y-polarized mode and three elliptical modulation air holes are used to control the power transfer between the two cores. By optimizing the structure parameters, the length of the polarization splitter is distinctly shortened. Numerical results demonstrate that the compact splitter has the length of 775 μm and up to 50 dB extinction ratio at the central wavelength of 1.55 μm. The corresponding bandwidth of 32 nm could be achieved from the wavelength of 1.534–1.566 μm with the extinction ratio over 20 dB     

A novel polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber

A kind of polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber has been proposed. The polarization splitter is based on the phenomenon of resonant tunneling. We use the finite element method and the full-vector beam propagating method to analyze the characteristics of three-core photonic crystal fiber. Compare with the silica glass three-core PCF, the ZnTe tellurite glass three-core PCF have higher extinction ratios and lower coupling loss, the extinction ratios ERA = ? 164.2681 dB and ERC = ? 37.1742 dB at the wavelength λ = 1.55 μm, and the coupling loss is lower than 0.02 dB. The 8.7983-mm-long splitter is proposed to achieve extinction ratio better than ? 20 dB and a bandwidthof 20 nm.     

Analysis of the characteristics of the polarization splitter based on tellurite glass dual-core photonic crystal fiber

A novel kind of polarization splitter based on tellurite glass dual-core photonic crystal fiber is proposed. The characteristics of the polarization splitter have been studied by the finite element method. By adjusting the ellipticity of the dual-core PCF, a very high value of birefringence can be reached. The high birefringence can increase the D-value of coupling length in the two orthogonal polarization directions, then the polarization-independent splitter can be achieved. Comparing with the SF57 glass dual-core PCF, the tellurite glass dual-core PCF has higher extinction ratio, the extinction ratio can reach ?31 dB at the wavelength $\lambda =1.55\mathrm{\mu }\mathrm{m}$. The 0.36-mm-long splitter is proposed to achieve extinction ratio better than ?10 dB and a bandwidth of 20 nm.     

A low transmission loss THz polarization splitter based on dual-core optical fiber

We propose a design of a low loss terahertz polarization splitter based on a dual-core terahertz fiber with crossed dielectric strips in the fiber cross section. Low transmission loss is realized by extending the mode field to the air holes adjacent to the solid material. An 11.4-cm-long terahertz polarization splitter is obtained with the extinction ratio better than −15 dB and a bandwidth of 16 μm.     

A compact polarization splitter utilizing directional coupler with left-handed material

A compact polarization splitter (PS) with left-handed material (LHM) sandwiched between two right-handed material (RHM) waveguides of a directional coupler (DC) is proposed. Its operation is by setting the coupling length of TM polarization be half that of TE polarization. Theoretic analysis exhibits that the PS with a very small size of 138.4 μm × 18.6 μm can be realized due to the inclusion of LHM even when the RHM with small birefringence is used.     

TE/TM-mode pass polarizers and splitter based on an asymmetric twin waveguide and resonant coupling

A new passive TE/TM-mode polarization filter for an InP system based on an asymmetric twin waveguide and resonant coupling is investigated. Linear taper sections with different taper angles are introduced to couple between the two vertically separated waveguides. The underlying waveguide is designed to enable direct edge coupling from an optical fiber. At a wavelength of 1.55?μm power extinction ratios of 20 dB for the TE- and more than 10 dB for the TM-polarization are reported for devices shorter than 400?μm. An increased extinction ratio can be obtained by concatenating structures. Furthermore, we show this concept can be expanded to a polarization splitter.     

Single-mode fiber design proposal using evolutionary technique with ultra low bending-loss appropriate in FTTH application

A proposal for the new single mode optical fiber containing four cladding layer with ultra low bending loss is presented. The suggested design method is based on the Genetic Algorithm optimization technique. Compared to the work reported in [1], our designed structure exhibits very small bending loss over the wide communication band (1.3–1.65 μm). Simulation results show bending loss of 6.78e?14 dB/turn at 1.55 μm for single turn of 5 mm radius. The best value reported in [1] was 2e?3 dB/turn for the same wavelength and radius of curvature.     

A surface-plasmon-polariton wavelength splitter based on a metal–insulator–metal waveguide

A surface-plasmon-polariton (SPP) wavelength splitter based on a metal–insulator–metal waveguide with multiple teeth is proposed. Using the transfer-matrix method, a plasmonic band gap is identified in the multiple-toothed structure, and the splitting wavelength of the SPP splitter can be easily adapted by adjusting the widths of the teeth and the gaps. The proposed wavelength splitter is further verified through finite-difference time-domain (FDTD) simulations, in which SPPs with incident wavelengths of 756 nm and 892 nm are successfully split and guided in opposite directions in the waveguide, with extinction ratios of 30 dB and 29 dB, respectively.     

Highly birefringent photonic crystal fiber polarization splitter made of soft glass

A soft glass dual core polarization splitter based on highly birefringent photonic crystal fiber (PCF) is proposed and the full vector finite element method (FEM) is employed to analyze the impacts of structural parameters on birefringence and the coupling length, and simulation results show that high birefringence on the order of 10⁻² can be obtained at 1.55 μm, moreover, hole size, hole pitch and elliptic ratio all affect birefringence and the coupling length. Based on these results, the PCF's structure is optimized to realize a polarization splitter of 282 μm whose largest extinction ratio is around −45.42 dB at 1.55 μm. Meanwhile, the bandwidth at the extinction ratio of −10 dB is about 90 nm, and around 32 nm at −20 dB.     

A new design of low-loss and ultra-flat zero dispersion photonic crystal fiber using hollow ring defect

New hollow ring defect structure is introduced in photonic crystal fiber design for ultra- flat zero dispersion with very low waveguide losses. The hollow ring defect consisted of a central hole surrounded by a doped silica ring provides highly flexible defect engineering capabilities in photonic crystal fibers to achieve precise control of dispersion value and dispersion slope while independently maintaining low waveguide losses, which was not attainable in previous designs. A nearly flat zero dispersion of D=0±0.51 ps/nm km was obtained in the wavelength range of 1.44–1.61 μm with the maximum slope of ?2.7×10^?2 ps/nm² km. The confinement loss was less than 5.75×10^?8 dB/m along with the bending loss of 2.8×10^?6 dB/m for the radius of 10 mm, and splice loss of less than 1.57 dB to conventional single mode fiber at 1.55 μm.     

A linearly-polarized tunable Yb-doped fiber laser using a polarization dependent fiber loop mirror

A Ytterbium-doped linearly-polarized fiber laser is constructed with a polarization maintaining fiber Sagnac loop mirror. The fiber loop mirror made of polarization maintaining fiber coupler has a polarization dependent reflectivity, which provides the necessary polarization discrimination between the slow and fast axes. With a fiber Bragg grating written in normal polarization maintaining fiber as an output coupler, laser output of up to 5.6 W at 1070 nm is generated with a polarization extinction ratio of > 20 dB and an overall efficiency of 55%. The broadband polarization dependent reflection of the fiber loop mirror offers advantages of easy spectral tuning and simple linearly-polarized laser generation.     

Wavelength conversion based on high nonlinear microstructured fiber

A wavelength conversion based on high nonlinear microstructured fiber is demonstrated. Core diameter and pitch of the microstructured fiber used in this wavelength conversion method are 2.05 μm and 5.0 μm, respectively. Diameter of the air-holes in the fiber cladding is 4.50 μm, the nonlinear coefficient of the microstructured fiber is 112.2 W^?1 km^?1 and it is 60 times higher than that of a conventional dispersion-shift fiber, the length of the fiber is 100 m. Four-wave-mixing effect is improved in the high nonlinear microstructure fiber and then the efficiency of the wavelength conversion is improved also. 10 Gbps Not-Return-to-Zero (NRZ) modulation format and 10 Gbps Return-to-Zero (RZ) modulation format are converted effectively by our method. This study can provide a new alternative solution for high effective all-light wavelength conversion in high speed optical communication systems with multi-wavelengths and all-light optical networks.     

八边形晶格双芯光子晶体光纤偏振分束器

分别以碲玻璃和SF6玻璃作为基质材料,设计制作了一种基于双折射效应的新型八边形晶格双芯光子晶体光纤偏振分束器。应用全矢量有限元法（FEM）分析了碲玻璃和SF6两种双芯光子晶体光纤中结构参数对双折射和相对耦合长度特性的影响,数值模拟了碲玻璃和SF6两种偏振分束器的性能。结果表明：在碲玻璃和SF6两种双芯光子晶体光纤中,增大椭圆率可同时增加结构的双折射和相对耦合长度,与SF6玻璃偏振分束器相比较,碲玻璃偏振分束器具有更高的消光比和更大的带宽,即在工作波长为1.55 μm处,消光比达到最小值-53.46 dB,且消光比小于-20 dB的带宽为120 nm。     

Theory and experiment of flat-top all-fiber comb filter based on two high birefringence fiber Sagnac loop filters

A simple flat-top all-fiber comb filter based on two high birefringence fiber (HBF) Sagnac loop filters is presented. The proposed flat-top comb filter consists of two HBF Sagnac loop filters with two polarization controllers (PCs) and a fiber circulator. According to the theoretical analysis, with proper settings of the polarization state of the PCs, the comb filter can realize flat-top passband and the channel spacing also can be switched when the comb filter is convex spectrum. The 0.3 dB bandwidth of the flat-top passband is 0.49 nm with a free spectral range of 1.4 nm. The maximum extinction ratio is nearly 20 dB. The comb filter with switchable channel spacing can be obtained from 0.7 nm to 1.4 nm.     

Low-threshold all-fiber 1000 nm supercontinuum source based on highly non-linear fiber

We present an highly efficient all-fiber compact supercontinuum source that exhibits a nearly flat spectrum from 1.1 μm to 2.1 μm. This broadband infrared optical source is made-up of a highly non-linear fiber pumped by a 1.55 μm self-Q-switched Er-Brillouin nanosecond pulsed fiber laser, which in turn is pumped by a low-power 1480 nm laser diode. In this work we highlight the great potential of highly non-linear fiber for supercontinuum generation with respect to conventional dispersion-shifted fiber by demonstrating a significant 10 dB power enhancement in the short wavelength side of the supercontinuum.     

Advanced multifunctional optical switch for multimode optical fiber networks

In this work, an advanced multifunctional optical switch based on multimode fibers is proposed. It can work as a 3 × 1 optical multiplexer/combiner, a 2 × 2 optical switch, a variable optical attenuator and a variable optical power splitter. All these functionalities can be developed in the same device without any hardware modification, only by using the proper ports and control electronics.The proposed switch has been developed for being used in the visible and near infrared wavelength range: 450–650 nm for optical fiber automobile applications, 650–850 nm for home broadband applications; and 850–1300 nm for multimode fiber access networks. Up to three different types of twisted nematic liquid crystal cells have been designed and fabricated for fulfilling these different wavelength ranges as part of the proposed device.The multifunctional switch has been implemented and experimentally tested. Crosstalk usually better than ? 15 dB at 532 nm, 660 nm and 850 nm, in any state has been measured. Switching is achieved at voltage levels of 4 Vrms. Fiber to fiber insertion losses when operating as a 2 × 2 optical switch, range from 10 to 15 dB within 200 nm wavelength range; with a non-optimized optics for collimation and coupling.     

Novel optical add-drop multiplexer based on dual racetrack resonators

In this paper, we designed and fabricated a four-channel optical add-drop multiplexer (OADM) based on dual racetrack resonators. The size of the fabricated device is only 2400 μm × 500 μm. The fabricated device can effectively and perfectly realize the signals upload and download. The free spectral range (FSR) of OADM is about 15.2 nm. We take the spectral responses near 1555 nm as an example. When the device acts as an optical drop multiplexer, the minimum insertion loss is 4.481 dB and the maximum extinction ratio is 31.931 dB. The maximum adjacent channels crosstalk is -9.845 dB. When the device acts as an optical add multiplexer, the minimum insertion loss is 0.944 dB and all of the extinction ratios are bigger than 25 dB. The maximum crosstalk is -16.531 dB which indicates the crosstalk can be neglected.     

Ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber

An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber(GDC-PCF)that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm.Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.     

Flat and compact switchable dual wavelength output at 1060 nm from ytterbium doped fiber laser with an AWG as a wavelength selector

A dual-wavelength ytterbium doped fiber laser with a narrowest spacing of 0.53 nm and widest spacing of 12.2 nm at 1064 nm is presented in this paper. An arrayed waveguide grating (AWG) together with an optical channel selector (OCS) have also been incorporated in the proposed setup that works as a switchable mechanism giving 23 different wavelength tunings. Producing an average output power of ?8 dB m and side mode suppression ratio (SMSR) of 59.65 dB, this dual-wavelength fiber laser is quite stable with an output power variance as low as 0.47 dB giving it an advantage due to its switching ability and stable dual-wavelength output powers.     

Incident angle and temperature dependence of WSi wire-grid polarizer

The dependences of the incident angle and thermal durability of a tungsten silicide (WSi) wire-grid polarizer were examined. A WSi grating with a 0.5 fill factor, 260 nm depth, and 400 nm period was formed on a Si surface using two-beam interference and dry etching. The TM transmission spectrum of the fabricated element was greater than 60% at the incident angle of θ = 40° (the angle between the incident direction and the perpendicular axis to the grating direction) in the 4–10 μm wavelength range. An extinction ratio of 22.2 dB was achieved at 2.5 μm wavelength. Additionally, results show that this polarizer has higher thermal resistance than that of commercial infrared polarizers. Therefore, this polarizer is effective for taking a polarized thermal image of high temperatures.