Broadband super-collimation with low-symmetric photonic crystal

We investigate dispersive properties of two dimensional photonic crystal (PC) called star-shaped PC (STAR-PC) in order to succeed super-collimation over a broad bandwidth. Both time- and frequency-domain numerical methods are conducted. Due to introduced low-symmetry in the primitive cell, flat contours are observed at the fifth band for transverse magnetic mode. The proposed structure supports a super-collimation effect over a broad wavelength range between 1443 nm and 1701 nm with a bandwidth of Δω = 16.42%. The intrinsic characteristic of STAR-PC provides in-plane beam propagation with a limited diffraction length of 120a, where a is the lattice constant. By means of STAR-PC, one may realize super-collimation based single-mode optical devices with a low insertion loss, reduced dispersion and wide bandwidth.     

New probing techniques of radiative shocks

Radiative shock waves propagating in xenon at a low pressure have been produced using 60 joules of iodine laser (λ = 1.315 μm) at PALS center. The shocks have been probed by XUV imaging using a Zn X-raylaser (λ = 21 nm) generated with a 20-ns delay after the shock creating pulse. Auxiliary high-speed silicon diodes allowed performing space- and time-resolved measurement of plasma self-emission in the visible and XUV. The results show the generation of a shock wave propagating at 60 km/s preceded by a radiative precursor. This demonstrates the feasibility of radiative shock generation using high power infrared lasers and the use of XRL backlighting as a suitable diagnostic for shock imaging.     

Compact WDM demultiplexer for seven channels in photonic crystal

We demonstrate a new device concept for wavelength division demultiplexing based on planar photonic crystal waveguides. The filtering of wavelength channels is realized by shifting the cutoff frequency of the fundamental photonic bandgap mode in consecutive sections of the waveguide. The shift is realized by modifying the size of the border holes.The proposed demultiplexer has an area equal to (16.5 μm × 6.5 μm) and thus it is verified that this structure is very small and can be integrated easily into optical integrated circuits with nanophotonic technologies. The output wavelengths of designed structure can be tuned for communication applications, around 1550 nm. The wavelengths of demultiplexer channels are λ₁ = 1.590 μm, λ₂ = 1.566 μm, λ₃ = 1.525 μm, λ₄ = 1.510 μm, λ₅ = 1.484 μm, λ₆ = 1.450 μm, λ₇ = 1.400 μm respectively. Designs offering improvement of number of the separate wavelengths (seven), miniaturization of the structure (107.25 μm²) is our aim in this work.In our structure, we consider that the 2D triangular lattice photonic crystal is composed of air holes surrounded by dielectric. Its parameters are: radius of holes (r = 0.130 μm), lattice constant (a = 0.380 μm), and index of membrane (n = 3.181:InP). The numerical model used to simulate the structure of the demultiplexer is based on the finite difference time domain (FDTD).     

Phase errors in FSE signals due to low frequency electromagnetic interference

ObjectiveTo quantitatively evaluate induced phase errors in fast spin echo (FSE) signals due to low frequency electromagnetic inference (EMI).MethodsSpecific form of Bloch equation is numerically solved in time domain for two different FSE pulse sequences (ETL = 8) with two different bandwidths. A single spin is modeled at x = 10 cm, EMI frequencies are simulated from 1 to 1000 Hz and phase errors at different echo times are calculated.ResultsPhase errors in the received echo signals induced by EMI are significantly higher at low frequencies (< 200 Hz) than at high frequencies and the phase errors at low frequencies can be effectively reduced by using high receiving bandwidth.ConclusionPulse sequence bandwidth can be used to control the phase errors in the FSE signals due to low frequency EMI.     

High-spatial-resolution monitoring of strong magnetic field using Rb vapor nanometric-thin cell

We have implemented the so-called λ-Zeeman technique (LZT) to investigate individual hyperfine transitions between Zeeman sublevels of the Rb atoms in a strong external magnetic field B in the range of 2500 ? 5000 G (recently it was established that LZT is very convenient for the range of 10 ? 2500 G). Atoms are confined in a nanometric thin cell (NTC) with the thickness L = λ, where λ is the resonant wavelength 794 nm for Rb D₁ line. Narrow velocity selective optical pumping (VSOP) resonances in the transmission spectrum of the NTC are split into several components in a magnetic field with the frequency positions and transition probabilities depending on the B-field. Possible applications are described, such as magnetometers with nanometric local spatial resolution and tunable atomic frequency references.     

Novel atmospheric extinction measurement techniques for aerospace laser system applications

Novel techniques for laser beam atmospheric extinction measurements, suitable for manned and unmanned aerospace vehicle applications, are presented in this paper. Extinction measurements are essential to support the engineering development and the operational employment of a variety of aerospace electro-optical sensor systems, allowing calculation of the range performance attainable with such systems in current and likely future applications. Such applications include ranging, weaponry, Earth remote sensing and possible planetary exploration missions performed by satellites and unmanned flight vehicles. Unlike traditional LIDAR methods, the proposed techniques are based on measurements of the laser energy (intensity and spatial distribution) incident on target surfaces of known geometric and reflective characteristics, by means of infrared detectors and/or infrared cameras calibrated for radiance. Various laser sources can be employed with wavelengths from the visible to the far infrared portions of the spectrum, allowing for data correlation and extended sensitivity. Errors affecting measurements performed using the proposed methods are discussed in the paper and algorithms are proposed that allow a direct determination of the atmospheric transmittance and spatial characteristics of the laser spot. These algorithms take into account a variety of linear and non-linear propagation effects. Finally, results are presented relative to some experimental activities performed to validate the proposed techniques. Particularly, data are presented relative to both ground and flight trials performed with laser systems operating in the near infrared (NIR) at λ = 1064 nm and λ = 1550 nm. This includes ground tests performed with 10 Hz and 20 kHz PRF NIR laser systems in a large variety of atmospheric conditions, and flight trials performed with a 10 Hz airborne NIR laser system installed on a TORNADO aircraft, flying up to altitudes of 22,000 ft.     

Ablation depth control with 40 nm resolution on ITO thin films using a square,flat top beam shaped femtosecond NIR laser

We reported on the ablation depth control with a resolution of 40 nm on indium tin oxide (ITO) thin film using a square beam shaped femtosecond (190 fs) laser (λ_p=1030 nm). A slit is used to make the square, flat top beam shaped from the Gaussian spatial profile of the femtosecond laser. An ablation depth of 40 nm was obtained using the single pulse irradiation at a peak intensity of 2.8 TW/cm². The morphologies of the ablated area were characterized using an optical microscope, atomic force microscope (AFM), and energy dispersive X-ray spectroscopy (EDS). Ablations with square and rectangular types with various sizes were demonstrated on ITO thin film using slits with varying x–y axes. The stereo structure of the ablation with the depth resolution of approximately 40 nm was also fabricated successfully using the irradiation of single pulses with different shaped sizes of femtosecond laser.     

Low loss propagation in slow light photonic crystal waveguides at group indices up to 60

We have designed slow light photonic crystal waveguides operating in a low loss and constant dispersion window of Δλ = 2 nm around λ = 1565 nm with a group index of n_g = 60. We experimentally demonstrate a relatively low propagation loss, of 130 dB/cm, for waveguides up to 800 μm in length. This result is particularly remarkable given that the waveguides were written on an electron-beam lithography tool with a writefield of 100 μm that exhibits stitching errors of typically 10–50 nm. We reduced the impact of these stitching errors by introducing “slow–fast–slow” mode conversion interfaces and show that these interfaces reduce the loss from 320 dB/cm to 130 dB/cm at n_g = 60. This significant improvement highlights the importance of the slow–fast–slow method and shows that high performance slow light waveguides can be realised with lengths much longer than the writing field of a given e-beam lithography tool.     

High-peak-power,short-pulse-width,LD end-pumped,passively Q-switched Nd:YAG 946 nm laser

High-peak-power, short-pulse-width diode pumped 946 nm Nd:YAG laser in passively Q-switching operation with Cr⁴⁺:YAG is reported. The highest average output power reaches 3.4 W using the Cr⁴⁺:YAG with initial transmissivity T₀=95%. When the T₀=90% Cr⁴⁺:YAG is employed, the maximum peak power of 31.4 kW with a pulse width of 8.3 ns at 946 nm is generated.     

Photoluminescence characterization of a novel red-emitting phosphor In2(MoO4)3:Eu3+ for white light emitting diodes

The red-emitting phosphor In₂(MoO₄)₃:Eu³⁺ with cubic crystal structure was synthesized by a conventional solid-state reaction technique and its photoluminescence properties were investigated. The prepared phosphor can be efficiently excited by ultraviolet (395 nm) and blue (466 nm) light. The emission spectra of the phosphor manifest intensive red-emitting lines at 612 nm due to the electric dipole ⁵D₀→⁷F₂ transitions of Eu³⁺. The chromaticity coordinates of x=0.63, y=0.35 (λ_ex=395 nm) and x=0.60, y=0.38 (λ_ex=466 nm) are close to the standard of National Television Standard Committee values (NTSC) values. The concentration quenching of In₂(MoO₄)₃:Eu³⁺ is 40 mol% and the concentration self-quenching mechanism under 466 nm excitation was the dd intereaction. As a result of the strong emission intensity and good excitation, the phosphor In₂(MoO₄)₃:Eu³⁺ is regarded as a promising red-emitting conversion material for white LEDs.     

Luminescence of Eu2+–vc− dipoles and their associates in CsI:Eu crystals

Spectral-kinetics properties of photo-scintillation excited with single light pulses of a nitrogen laser (λ=337.1 nm, t_1/2=5 ns, Q=1 mJ) have been studied in CsI:Eu crystals at temperature within 80–300 K. It is found that the exponential decay of 463 nm emission band has a time constant which grows from 0.85 μs at 78 K to 1.6 μs at 380 K. Such an anomalous temperature behavior of 463 nm emission decay kinetics is discussed in terms of the crystal thermal expansion. It has been proposed that 463 nm emission is caused by a cluster center consisting of three dipoles Eu²⁺v_c^? bounded with each other in a hexagon. Owing to the exchange resonance in the cluster, the energy passes from an excited dipole to a non-excited one and the distance between them gets longer due to thermal expansion of the crystal.     

Ultrastructural analysis of the low level laser therapy effects on the lesioned anterior tibial muscle in the Gerbil

Low level laser therapy (LLLT) is known for its positive results but studies on the biological and biomodulator characteristics of the effects produced in the skeletal muscle are still lacking. In this study the effects of two laser dosages, 5 or 10 J/cm², on the lesioned tibial muscle were compared. Gerbils previously lesioned by 100 g load impact were divided into three groups: GI (n = 5) controls, lesion non-irradiated; GII (n = 5), lesion irradiated with 5 J/cm² and GIII (n = 5), lesion irradiated with 10 J/cm², and treated for 7 consecutive days with a laser He–Ne (λ = 633 nm). After intracardiac perfusion, the muscles were dissected and reduced to small fragments, post-fixed in 1% osmium tetroxide, dehydrated in increasing alcohol concentrations, treated with propylene oxide and embedded in Spurr resin at 60 °C. Ultrafine cuts examined on a transmission electron microscope (Jeol 1010) revealed in the control GI group a large number of altered muscle fibers with degenerating mitochondria, intercellular substance containing degenerating cell fragments and budding blood capillaries with underdeveloped endothelial cells. However, groups GII and GIII showed muscle fibers with few altered myofibrils, regularly contoured mitochondria, ample intermembrane spaces and dilated mitochondrial crests. The clean intercellular substance showed numerous collagen fibers and capillaries with multiple abluminal processes, intraluminal protrusions and several pinocytic vesicles in endothelial cells. It was concluded that laser dosages of 5 or 10 J/cm² delivered by laser He–Ne (λ = 633 nm) during 7 consecutive days increase mitochondrial activity in muscular fibers, activate fibroblasts and macrophages and stimulate angiogenesis, thus suggesting effectivity of laser therapy under these experimental conditions.     

Laser micro-machined semi-slinky like MEMS structures: Novel interface coolers

Laser micro-machining has recently been considered a precision and reproducible manufacturing technique in MEMS fabrication because of the superior characteristics of a focused laser beam. It is not only a unique tool but also an invisible optical drill. The aim of the present paper is two-fold: to manufacture novel miniaturized titanium 3D MEMS surface structures in order to increase the cooling performance. Second is to find the behaviors of the operational parameters which controlling the laser-material interaction mechanisms and also suggest the best adjustments in order to achieve this novel semi-slinky like spiral MEMS surface structures with using a 20 W ytterbium fiber laser. Pure titanium micro-MEMS product which has novel interface coolers was manufactured using a ytterbium fiber laser (λ=1060 nm) with 40 ns pulse duration. Best adjustments were, respectively, the pulse duration: 40 ns, the pulse energy: 0.4 mJ, the laser scanning speed: 336.1 mm/s, the peak power density: 17.46 ? 10⁸ W/cm².     

Ultra-broad and flat supercontinuum generation in short photonic crystal fiber combined with conventional fibers

In order to gain ultra-broad and flat super-continuum (SC) spectrum, we propose and demonstrate a new scheme. By coupling a train of short pulses with 100 fs width and 16.2 mW average power generated by a mode-locked laser into the scheme – short photonic crystal fiber (PCF) combined with conventional fibers. The SC spectrum has 491 nm bandwidth at −15 dBm below the spectral peak with ±0.5 dBm uniformity 100 nm in only 0.45 m PCF. The spectral bandwidth generated in the scheme increases 292 nm than spectrum generated in the two conventional fibers, and increases 152 nm than spectrum generated in the three convention fibers.     

Design of multi-layer mirrors for measuring optical phase modulation at 1300 nm

A theoretical design and experimental realization of multi-layer mirrors for Fabry–Perot interferometry and optical telecommunications is described in this work. The mirrors were designed and fabricated by 13 successive thin layers to achieve very high reflectance at optical wavelengths around 1300 nm. Thin layers are ZnS and MgF₂ presenting high and low refractive index, respectively. Layer thickness λ_o/2 at λ_o=656 nm. Experimental results include characterization of transmittance of mirrors around 1300 nm. Additionally, the mirrors were integrated in a Fabry–Perot interferometer to characterize optical sources emitting at 1300 nm. Finally to show a practical application, optical phase modulation was analyzed, using the fabricated mirrors through a scanning Fabry–Perot interferometer acting as high-resolution optical spectrum analyzer (OSA).     

Tuneability of Sm(1 − x)CexFeO3 ± λ perovskites: Thermal stability and electrical conductivity

Trimetallic perovskite oxides, Sm_(1 ? x)Ce_xFeO_3 ± λ (x = 0–0.05), were prepared by thermal decomposition of amorphous citrate precursors followed by calcinations. The material properties of the substituted perovskites were characterized by X-ray diffraction (XRD), X-ray florescence spectroscopy (XRF), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The doped materials exhibited a single perovskite phase in air up to 1350 °C and have specific surface areas in the range of 2.696–8.665 m²/g. In reducing atmosphere (5%v/vH₂/N₂), the unsubstituted perovskite (x = 0) decomposed into two phases while the ceria stabilized materials (x = 0.01, x = 0.03, x = 0.05) remained in a single phase as revealed by XRD analysis. Their conductivities were measured by the four point probe method in air and in dilute hydrogen (5%v/vH₂/N₂) separately. The ceria substituted materials show increased stability versus reduction and phase separation for a wide temperature range (up to 1000 °C). Although undoped SmFeO₃ has higher conductivity under oxidizing conditions than ceria doped SmFeO₃ due its p-type nature, the situation is reversed under reducing conditions. The ceria substituted perovskites (Sm_(1 ? x)Ce_xFeO_3 ± λ, x = 0–0.05) showed higher conductivity in reducing than in oxidizing conditions, suggesting that ceria doping at the A-site has changed the SmFeO₃ from p-type to n-type semi-conducting behavior.     

Low-threshold continuous-wave Tm3+:YAlO3 laser

We describe a continuous-wave, low-threshold Tm:YAlO₃ (Tm:YAP) laser operating at 1945 nm with incident threshold pump powers in the 10–20 mW range. The z-cavity containing a 2-mm-long Tm:YAP crystal with 4 at.% Tm³⁺ concentration was end pumped by a continuous-wave Ti:sapphire laser at 795 nm. Tight focusing of the pump and the laser beams enabled low-threshold operation. The power performance of two different cavity configurations with 5-cm radius (R = 5 cm cavity) and 10-cm radius (R = 10 cm cavity) curved mirrors was tested. The best performance was obtained with the R = 10 cm configuration, where, the incident threshold pump power could be lowered to 10 mW after optimizing the polarization direction of the pump beam and by employing double pumping. Theoretical estimation of the threshold power was in good agreement with the experimental observations. The laser could be further tuned from 1842 to 1994 nm.     

Exciton-polariton state in nanocrystalline SiC films

We studied the features of optical absorption in the films of nanocrystalline SiC (nc-SiC) obtained on the sapphire substrates by the method of direct ion deposition. The optical absorption spectra of the films with a thickness less than ~500 nm contain a maximum which position and intensity depend on the structure and thickness of the nc-SiC films. The most intense peak at 2.36 eV is observed in the nc-SiC film with predominant 3C-SiC polytype structure and a thickness of 392 nm. Proposed is a resonance absorption model based on excitation of exciton polaritons in a microcavity. In the latter, under the conditions of resonance, there occurs strong interaction between photon modes of light with λ_ph=521 nm and exciton of the 3С polytype with an excitation energy of 2.36 eV that results in the formation of polariton. A mismatch of the frequencies of photon modes of the cavity and exciton explains the dependence of the maximum of the optical absorption on the film thickness.     

Remote sensing estimation of Chlorophyll a and suspended sediment concentration in turbid water based on spectral separation

Chlorophyll a and suspended sediment are important indicators of water quality, and remote sensing estimation of them is difficult due to the optical complexity of turbid water. The spectrum above water surface is influenced by phytoplankton, suspended sediment and colored dissolved organic material in water, thus spectral separation is important before estimating one specific component. Based on the field experiment of pond water and Taihu lake, China, this study calculated the Gaussian parameters of Chlorophyll a (Chla) and suspended sediment (SS) through spectral decomposition, and then these parameters were used to separate the mixed spectrum of water samples from pond water and Taihu lake. After spectral separation, the Chla estimation model based on the peak height at 650 nm has high accuracy (R² = 0.78, RMSE = 4.80 mg/m³), better than the band-ratio model; the SS estimation model based on the peak height at 811 nm (R² = 0.82, RMSE = 6.80 mg/L) performs better than the single-band model. Results in this study indicate that spectral separation based on Gaussian parameters is a good method for Chla and SS estimation in turbid lake water.     

Specific features of nonlinear optical effects in several stilbene derivatives

Measurements of three different stilbene derivative molecules incorporated into the PMMA and polycarbonate (PC) matrices using 10 ns Nd:YAG nanosecond laser λ = 1064 nm) as the fundamental ones were done. The chromophore molecules were incorporated into the corresponding matrices and aligned by the dc-electric field up to 4 kV/cm during the spin coating. We have established that the optimal content of the chromophore corresponded to the concentration of about 8.9% in weighting units. The samples had a thickness of about 0.5 mm. Theoretical quantum chemical simulations of the theoretical hyperpolarizability tensor β (SHG) and the magnitude polarizability tensor α for various excitation energies for the three modified stilbenes principally confirm the obtained results.