Conductance study of the complexation of substituted and lariat 16-crown-5 derivatives with alkali metal ions in nonaqueous solvents

Formation constants (K _ML) of 1:1 complexes of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) and 15,15-dimethyl-16-crown-5 (DM16C5) with alkali metal ions were determined in acetonitrile (AN) and propylene carbonate (PC) by conductometry at 25°C. Except for the case of Li⁺-and K⁺-16C5 complexes in PC, the selectivity sequences of L16C5 and DM16C5 are identical with those of the parent crown ether 16-crown-5 (16C5) regardless of the solvent (AN, PC, methanol) (Na¹ > Li⁺ > K⁺ > Rb⁺ > Cs⁺), which show the size-fit correlation. The selectivities of L16C5 and DM16C5 for the alkali metal ions are governed not by the sidearms but by the cavity size. The stability of the crown ether complex is dependent not on the dielectric constant but largely on the donor number of the solvent. TheK _ML(M₁ ⁺)/K _ML(M₂ ⁺) ratio of L16C5 or 16C5 varies very much with the solvent in the cases of M₁=Na, M₂=K and M₁=Na, M₂=Li, but that of DM16C5 is almost constant regardless of the solvent.     

Solvent extraction of sodium perrhenate by 3m-crown-m ethers (m = 5, 6) and their mono-benzo-derivatives into 1,2-dichloroethane: Elucidation of an overall extraction equilibrium based on component equilibria containing an ion-pair formation in water

Equilibrium constants () for the ion-pair formation of a complex ion NaL⁺ with ReO₄⁻ in water were determined potentiometrically at 25 °C and the ionic strength (I) of 0 mol dm⁻³ using a Na⁺-selective electrode. Here, crown ethers, L, were 15-crown-5 ether (15C5), benzo-15C5, 18-crown-6 ether (18C6) and benzo-18C6. Also, NaReO₄ was extracted by the L into 1,2-dichloroethane and then extraction constants (K_ex/mol⁻² dm⁶) for the species, NaLReO₄, were determined at 25 °C by AAS. These K_ex values were resolved into four component equilibrium constants containing K_MLA calculated at given I values. Based on these data, extraction-abilities of the L against the perrhenate were discussed in comparison with those of sodium picrate-L systems reported previously.     

Solvent extraction of silver picrate by 3m-crown-m ethers (m = 5, 6) and its mono-benzo-derivative from water into benzene or chloroform: elucidation of an extraction equilibrium using component equilibrium constants

Ion-pair formation constant (K_AgPic in mol⁻¹ dm³) of silver picrate (AgPic), those (K_AgLPic) of its ion-pair complexes (AgLPic) with crown ethers (L) and complex formation constants (K_AgL) of Ag⁺ with L (15-crown-5 ether (15C5) and benzo-15C5) in water (w) were determined potentiometrically at 25 °C. Compounds used as L were 18-crown-6 ether (18C6), its benzo-derivative (B18C6) and the two 15C5 derivatives. Extraction constants (K_ex in mol⁻¹ dm³) of AgPic with L (15C5, 18C6, B18C6) from acidic w-phases into either C₆H₆ or CHCl₃ were recalculated from K_AgPic, K_AgL, K_AgLPic and data opened in previous papers. Thus obtained K_ex was divided into five component equilibrium constants containing K_AgL and K_AgLPic anew. Then, contributions of the component constants, K_AgL, K_AgLPic and distribution constants of AgLPic between the w- and C₆H₆-phases, to K_ex were discussed and compared with corresponding extraction systems of NaPic and KPic with18C6.     

Solvent extraction of univalent and bivalent metal picrates with 1,2-bis[2-(2-methoxyethoxy)ethoxy] benzene (noncyclic crown ether) into CHCl3

The overall extraction equilibrium constants, K_ex, of 1:1:m complexes of 1,2-bis[2-(2-methoxyethoxy)ethoxyjbenzene (AC · B18C6) with uni- and bivalent metal picrates, MA _m were determined at 25°C between CHCl₃ and water, and thereby the ion-pair complex-formation constants,K _MLA,o, of AC · B18C6 with the univalent metal picrates in CHCl₃ were calculated. The AC · B18C6 is an open-chain analog of benzo-18-crown-6 (B18C6). The equilibrium constants of AC · B18C6 were compared with those of B18C6. K_ex sequences of AC · B18C6 for uni- and bivalent metals are Tl⁺ > K⁺ > Rb⁺ > Cs⁺ > Na⁺ > Li⁺ and Pb²⁺ > Ba²⁺ > Sr²⁺, respectively. The same extraction-selectivity was observed for B18C6, but the extractability of AC · B18C6 for the same cation is much lower than that of B18C6; the extraction selectivity of AC · B18C6 for alkali metals is lower than that of B18C6. TheK _MLA,o sequence of AC · B18C6 is K⁺ > Rb⁺ > Tl⁺ > Cs⁺ Na⁺, which is consistent with that of B18C6. ButK _MLA,o of AC · B18C6 is much smaller than the correspondingK _MLA,o of B18C6; the selectivity of AC · B18C6 among alkali metal picrates in CHCl₃ is lower than that of BI8C6. This reflects the difference in the structures between AC · B18C6 (acyclic and flexible) and B18C6 (cyclic and rigid).     

Spectrophotometric determination of trace amounts of lead(II) by ion-pair extraction with cryptand (2.2.2) and eosin

The solvent extraction of ion-pair complexes of calcium, strontium and lead (2.2.2) cryptates is described. The extraction equilibrium constants (D_C, K_ex and K_D) at room temperature are reported. The formation of the positively-charged lead cryptate ion and its extraction into chlorobenzene as an ion-pair with eosin are the basis of the proposed spectrophotometric determination of traces of lead. The high molar absorptivity of the ion-pair complex (? = 1.1 × 10⁵ l mol^-1 cm^-1) and the linearity of the calibration graph over the range 0–10^-5 M, allow even 0.1 ppm lead to be determined. The selectivity is high; there is no interference from cations often occurring with lead, such as Bi³⁺, Sn²⁺, Hg²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Ca²⁺, Pd²⁺, Ag⁺ and Tl⁺.     

Extraction of Pb2+ with sodium dicarbollylcobaltate in the presence of 15-crown-5

From extraction experiments with ²² Na as a tracer, the exchange extraction constant corresponding to the equilibrium Pb²⁺ (aq)+2 NaL⁺ (nb)PbL₂ ²⁺ (nb)+2 Na⁺ (aq) in the two-phase water-nitrobenzene system (L = 15-crown-5; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K_ex (Pb²⁺ , 2NaL⁺ ) = 4.7±0.1. Moreover, the stability constant of the complex PbL₂ ²⁺ in nitrobenzene saturated with water was calculated for a temperature of 25 °C as log _nb (PbL₂ ²⁺ ) = 17.9±0.1.     

Extraction of lithium with nitrobenzene solution of strontium bis-1,2-dicarbollylcobaltate in the presence of 15-crown-5

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium 2Li⁺(aq)+SrL₂ ²⁺(nb) 2LiL⁺(nb)+Sr²⁺(aq) taking place in the two-phase water-nitrobenzene system (L=15-crown-5; aq=aqueous phase, nb=nitrobenzene phase) was evaluated as logK _ex (2Li⁺;SrL₂ ²⁺)=−3.7. Further, the stability constant of the 15-crown-5—lithium complex in nitrobenzene saturated with water was calculated: log β_nh(LiL⁺)=7.0.     

Extraction of several lanthanide and actinide radionuclides with crown ethers

The solvent extraction of several lanthanide radionuclides (¹⁴⁴Ce,¹⁴⁷Nd,¹⁵⁴Eu,¹⁷⁰Tm and¹⁶⁹Yb from aqueous picric acid solutions with (4-methylbenzo-15-crown-5) in chloroform has been investigated. The extracted species are found to be 1∶2∶3 (metal/crown/ picrate) complexes from slope analysis. The extraction equilibrium constants (K_ex) have been determined at 25 °C. The order of K_ex values for trivalent lanthanides is Nd³⁺> >Eu³⁺>Ce³⁺>Tm³⁺>Yb³⁺. This suggests that the ionic size of Nd³⁺ (r=0.995 Å) may be nearer to the cavity size of (4-methylbenzo-15-crown-5) than the other lanthanides. The extraction of thorium(IV) and uranium(IV, VI) by some crown ethers from nitric, hydrochloric and picric acid solutins have been studied. In nitric acid media, thorium(IV) forms a 1∶2 complex with DC18C6 or DC24C8, resembling plutonium(IV) and neptunium(IV) (identification of these reagents is given in Table 1 and Fig. 1). In hydrochloric acid media, the extraction of uranium(IV, VI) leads to a large loading and may be suitable for practical application. The far infrared spectra of the extracted complex in 1,2-dichloroethane have been examined for the UO₂Cl₂?DCI8C6, UO₂Cl₂?DC24C8, Th(NO₃)₄?DC18C6 and Th (NO₃)₄?DC24C8 systems. The spectra show the existence of direct bonding between the extracted metal ion and the oxygen donor in the ring of these crown ethers.     

Extraction of silver from water into nitrobenzene using sodium dicarbollylcobaltate in the presence of valinomycin

Summary From extraction experiments andg-activity measurements, the extraction constant corresponding to the Ag⁺(aq) + NaL⁺(nb)?AgL⁺(nb) + Na⁺(aq) equilibrium in the two-phase water-nitrobenzene system (L=valinomycin; aq=aqueous phase, nb=nitrobenzene phase) was evaluated as log K_ex(Ag⁺,NaL⁺)=-0.6±0.1. The stability constant of the valinomycin-silver complex in nitrobenzene saturated with water was calculated: log b_nb(AgL⁺)=4.6±0.1. The stability constants of complexes of some univalent cations with valinomycin were summarized and discussed.     

Extraction equilibria of various metal picrates with 19-crown-6 between benzene and water. Effect of the extra methylene group on extraction ability and selectivity

The overall extraction equilibrium constants (K(ex)) of picrates of Li(+), Na(+), K(+), Rb(+), Cs(+), Ag(+), Tl(+), and Sr(2+)with 19-crown-6 (19C6) were determined between benzene and water at 25 degrees C. The K(ex) values were analyzed into the constituent equilibrium constants, i.e. the extraction constant of picric acid, the distribution constant of the crown ether, the formation constant of the metal ion-crown ether complex in water, and the ion-pair extraction constant of the complex cation with the picrate anion. The effects of an extra methylene group of 19C6 on the extraction ability and selectivity are discussed in detail by comparing the constituent equilibrium constants of 19C6 with those of 18-crown-6 (18C6). The K(ex) value of 19C6 for each metal ion is lower than that of 18C6, which is mostly attributed to the higher lipophilicity of 19C6. The extraction ability of 19C6 for the univalent metal ions decreases in the order Tl(+)>K(+)>Rb(+)>Ag(+)>Cs(+)>Na(+)Li(+), which is the same as that observed for 18C6. The difference in logK(ex) between the univalent metals is generally smaller for 19C6 than for 18C6. The extraction selectivity of 19C6 is governed by the selectivity in the ion-pair extraction, whereas that of 18C6 depends on both the selectivities in the ion-pair extraction and in the complexation in water.     

Solvent extraction of sodium from water into nitrobenzene by using strontium dicarbollylcobaltate in the presence of benzo-15-crown-5

Summary From extraction experiments andg-activity measurements, the extraction constant corresponding to the 2Na⁺(aq)+SrL(nb)?2NaL⁺(nb)+Sr²⁺(aq) equilibrium taking place in the two-phase water-nitrobenzene system (L=benzo-15-crown-5; aq=aqueous phase, nb=nitrobenzene phase) was evaluated as log K_ex(2Na⁺,SrL)=1.0±0.1. Further, the stability constant of the benzo-15-crown-5-sodium complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log b_nb(NaL⁺)=7.8±0.1.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Extraction of lead from water into nitrobenzene by using strontium dicarbollylcobaltate in the presence of benzo-15-crown-5

Summary From extraction experiments andg-activity measurements, the extraction constant corresponding to the equilibrium Pb²⁺(aq)+SrL(nb)?PbL(nb)+Sr²⁺(aq)taking place in the two-phase water-nitrobenzene system (L = benzo-15-crown-5; aq = aqueous phase, nb = nitrobenzene phase) was evaluated aslog K_ex(Pb²⁺,SrL)=0.1±0.1. Further, the stability constant of the benzo-15-crown-5-lead complex in nitrobenzene saturated with water was calculated for a temperature of25 °C:log b_nb(PbL)=13.2±0.1.     

Extraction of Sodium and Potassium Perchlorates with Dibenzo-18-crown-6 into Various Organic Solvents. Quantitative Elucidation of Anion Effects on the Extraction-Ability and -Selectivity

The constants for overall extraction into various diluents of low dielectric constants (K_ex) and aqueous ion-pair formation (K_MLA) of dibenzo-18-crown-6 (DB18C6)–sodium and potassium perchlorate 1:1:1 complexes (MLA) were determined at 25°C. The K_ex value was analyzed by the four underlying equilibrium constants. The K_MLA values were determined by applying our established method to this DB18C6/alkali metal perchlorate extraction system. The K_M(DB18C6)A value of the perchlorate is much greater for K⁺ than for Na⁺, and is much smaller than that of the picrate. The K_MLA value makes a negative contribution to the extractability of DB18C6 for MClO₄, whereas the value of the MLA distribution-constant does a major one. The partition behavior of M(DB18C6)ClO₄ obeys the regular solution theory. However, the M(DB18C6)ClO₄ complexes in the diluent of high dipole moment somewhat undergo the dipole–dipole interaction. DB18C6 always shows high extraction selectivity for KClO₄ over NaClO₄, which is governed largely by the much greater K_MLA value for K⁺ than for Na⁺. The K⁺ extraction-selectivity of DB18C6 over Na⁺ for perchlorate ions is comparable to that for picrate ions. By comparing this perchlorate system with the picrate one, the anion effects on the extraction-efficiency and -selectivity of DB18C6 for Na⁺ and K⁺ was discussed in terms of the fundamental equilibrium constants.     

Structural and Chemical Features of Extraction with Crown Ethers

Unlike linear extracting agents, in the extraction of metal salts from aqueous solutions of inorganic acids with crown ethers, the inclusion compounds, whose composition depends on several external and internal factors, go to the organic phase. The study of the molecular structure of the formed complexes by X-ray diffraction analysis showed that adducts of crown ethers with inorganic acids are host–guest complexes in which the hydroxonium ion is in the polyether macrocycle cavity. When the aqueous phase contains metal ions capable of displacing the hydroxonium ions from the macrocycle (K⁺, Pb²⁺, Hg²⁺, Sr²⁺, NH₄ ⁺), complexes containing metal cations as the guest in the macrocycle cavity, according to X-ray diffraction data, go to the organic phase. In addition, metals forming ionic associates (AuCl₄ ^-, FeCl₄ ^-, GaCl₄ ^-) in an aqueous solution are extracted with crown ethers in accordance with the anion-exchange mechanism. A system in which traces of metals in the 2 M HNO₃ +5 M HCl mixture serve as the aqueous phase was proposed for estimation of the general extraction ability of crown ethers. Such a system can be used for metal extraction via any possible mechanism. The stereochemical peculiarities of the extraction ability of crown ethers (compared to linear molecules) can be used for selective extraction and separation of metals.     

Fine‐tuning of electromembrane extraction selectivity using 18‐crown‐6 ethers as supported liquid membrane modifiers

Selectivity of electromembrane extractions (EMEs) was fine‐tuned by modifications of supported liquid membrane (SLM) composition using additions of various 18‐crown‐6 ethers into 1‐ethyl‐2‐nitrobenzene. Gradually increased transfer of K⁺, the cation that perfectly fits the cavity of 18‐crown‐6 ethers, was observed for EMEs across SLMs modified with increasing concentrations of 18‐crown‐6 ethers. A SLM containing 1% w/v of dibenzo‐18‐crown‐6 in 1‐ethyl‐2‐nitrobenzene exhibited excellent selectivity for EMEs of K⁺. The established host–guest interactions between crown ether cavities in the SLM and potassium ions in donor solution ensured their almost exhaustive transfer into acceptor solution (extraction recovery ～92%) within 30 min of EME at 50 V. Other inorganic cations were not transferred across the SLM (Ca²⁺ and Mg²⁺) or were transferred negligibly (NH₄⁺, Na⁺; extraction recovery < 2%) and had only subtle effect on EMEs of K⁺. The high selectivity of the tailor‐made SLM holds a great promise for future applications in EMEs since the range of similar selective modifiers is very broad and may be applied in various fields of analytical chemistry.     

Extraction of barium picrate into nitrobenzene in the presence of benzo-15-crown-5

From extraction experiments with ¹³³Ba as a tracer, the extraction constant corresponding to the equilibrium Ba²⁺(aq) + 2A^-(aq) + 2L(nb) BaL₂ ²⁺(nb) + 2A^-(nb) in the two-phase water-nitrobenzene system (A^- = picrate, L = benzo-15-crown-5; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (BaL₂ ²⁺, 2A^-) = 5.7. Furthermore, the stability constant of the benzo-15-crown-5 - barium complex in nitrobenzene saturated with water was calculated: log b_nb (BaL₂ ²⁺) = 14.6.     

New Potassium- and Cesium-selective Ionophoric Bis(crown ether)s Derived from Xanthene-4,5-dicarboxylic Acid

A series of bis(crown ether)sbased-upon a xanthene-4,5-dicarboxylic acid skeletonwas prepared and their ionophoric properties towardalkali metal cations were investigated. Bis(crownether)s bearing 15-crown-5 and 18-crown-6 moietiesexhibited pronounced extraction efficiencies towardK⁺ and Cs⁺ ions, respectively, and theextraction constant estimated by solvent extractionstudies was as high as 10⁹ for the 2-K⁺ and 3-Cs⁺ systems. Using UVtitration of potassium picrate with 2 in THF, thecomplex was found to have a structure of a completelyencapsulated guest in the host. In transportexperiments, the bis(crown ether)s showed nosignificant selectivity pattern compared withextraction results, again implying the strongcomplexation of bis(crown ether)s. Ion-selectiveelectrode studies also demonstrated that the selectiveionophoric properties of 2 toward K⁺ werereminiscent of the natural antibiotic valinomycinexcept for a somewhat slow response.     

Ion-pair extraction of transition metal cations from aqueous media using novel N2O2-macrocyclic crown ligands

Three new macrocyclic crown ether ligands containing nitrogen–oxygen donor atoms were designed and synthesized from 1,4-bis(2′-formylphenyl)-1,4-dioxabutane and 4-nitro-o-phenylenediamine. Ion-pair extraction of metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Pb²⁺ from aqueous phase to the organic phase was carried out using the novel ligands. The solvent effect over the metal picrate extractions was investigated at 25 ± 0.1 °C by using UV–visible spectrometry. The extractability and the values of the extraction constants (log K_ex) were determined for the extracted complexes.     

Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).