A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Cyclophane-lectin Conjugates as a New Class of Water-soluble Host

A conjugate composed of tetraaza[6.1.6.1]paracyclophane bearing carboxylic acids and lectin, a carbohydrate binding protein, was prepared. The specific saccharide-binding abilities as well as the secondary structural features of the lectin were not disturbed, when the cyclophane were covalently bound to the lectin. The conjugate was found to act as a water-soluble host for inclusion of anionic guest molecules such as 6-p-toluidino-naphthalene-2-sulfonate (TNS) and 8-anilinonaphthalene-1-sulfonate (ANS) in aqueous acetate buffer (pH 4.0) with binding constants of 4.2 × 10⁴ and 1.5 × 10⁴ dm³ mol⁻¹, respectively. The obtained binding constants were much larger than those by untethered water-soluble cyclophane. A highly desolvated microenvironment was provided by the cyclophane cavity on the protein surfaces so that the tight host–guest interaction, which brought about the marked motional repression of the entrapped guests, became effective. The conjugate also showed molecular discrimination capabilities toward the anionic guests through electrostatic repulsion mechanism originating from acid-dissociation equilibrium of carboxylic acids of the cyclophane branches.     

Preparation and multivalently enhanced guest-binding affinity of water-soluble cyclophane heptadecamers

Water-soluble cyclophane heptadecamers (17a and 17b), which were constructed with the core cyclophane heptadecamer and 36 polar side chains with a terminal galactose or glucose residue, respectively, were prepared. An analogous cyclophane pentamer (5a) was also prepared. The stoichiometry for the complex of the cyclophane oligomers with fluorescence guests such as TNS was confirmed to be 1:1 host:guest by a Job plot. The guest-binding affinity of cyclophane heptadecamers 17a and 17b was much enhanced relative to that of a corresponding monocyclic cyclophane (1a), i.e., the 1:1 binding constant (K) values for 17a with TNS, 2,6-ANS, and 1,8-ANS were ca. 1700-, 1600-, and 1500-fold larger than those of 1a for the identical guests, respectively, which reflects the multivalency effects in macrocycles. Meanwhile, the corresponding K values for the cyclophane pentamer 5a with TNS, 2,6-ANS, and 1,8-ANS were ca. 250-, 250-, and 110-fold larger than those of 1a for the identical guest, respectively.     

From Packed “Sandwich” to “Russian Doll”: Assembly by Charge‐Transfer Interactions in Cucurbit[10]uril

As the host possessing the largest cavity in the cucurbit[n]uril (CB[n]) family, CB[10] has previously displayed unusual recognition and assembly properties with guests but much remains to be explored. Herein, we present the recognition properties of CB[10] toward a series of bipyridinium guests including the tetracationic cyclophane known as blue box along with electron‐rich guests and detail the influence of encapsulation on the charge‐transfer interactions between guests. For the mono‐bipyridinium guest (methylviologen, MV ²⁺), CB[10] not only forms 1:1 and 1:2 inclusion complexes, but also enhances the charge‐transfer interactions between methylviologen and dihydroxynaphthalene ( HN ) by mainly forming the 1:2:1 packed “sandwich” complex (CB[10] ? 2 MV ²⁺ ?HN ). For guest 1 with two bipyridinium units, an interesting conformational switching from linear to “U” shape is observed by adding catechol to the solution of CB[10] and the guest. For the tetracationic cyclophane‐blue box, CB[10] forms a stable 1:1 inclusion complex; the two bipyridinium units tilt inside the cavity of CB[10] according to the X‐ray crystal structure. Finally, a supramolecular “Russian doll” was built up by threading a guest through the cavities of both blue box and CB[10].     

A Macrocycle Based on a Heptagon‐Containing Hexa‐peri‐hexabenzocoronene

A cyclophane is reported incorporating two units of a heptagon‐containing extended polycyclic aromatic hydrocarbon (PAH) analogue of the hexa‐peri‐hexabenzocoronene (HBC) moiety (hept‐HBC). This cyclophane represents a new class of macrocyclic structures that incorporate for the first time seven‐membered rings within extended PAH frameworks. The saddle curvature of the hept‐HBC macrocycle units induced by the presence of the nonhexagonal ring along with the flexible alkyl linkers generate a cavity with shape complementarity and appropriate size to enable π interactions with fullerenes. Therefore, the cyclophane forms host–guest complexes with C₆₀ and C₇₀ with estimated binding constants of K_a=420±2 m ^?1 and K_a=(6.49±0.23)×10³ m ^?1, respectively. As a result, the macrocycle can selectively bind C₇₀ in the presence of an excess of a mixture of C₆₀ and C₇₀.     

Switching Between Giant Positive and Negative Thermal Expansions of a YFe(CN)6‐based Prussian Blue Analogue Induced by Guest Species

The control of thermal expansion of solid compounds is intriguing but remains challenging. The effect of guests on the thermal expansion of open‐framework structures was investigated. Notably, the presence of guest ions (K⁺) and molecules (H₂O) can substantially switch thermal expansion of YFe(CN)₆ from negative (α _v=−33.67×10⁻⁶ K⁻¹) to positive (α _v=+42.72×10⁻⁶ K⁻¹)—a range that covers the thermal expansion of most inorganic compounds. The mechanism of such substantial thermal expansion switching is revealed by joint studies with synchrotron X‐ray diffraction, X‐ray absorption fine structure, neutron powder diffraction, and density functional theory calculations. The presence of guest ions or molecules plays a critical damping effect on transverse vibrations, thus inhibiting negative thermal expansion. An effective method is demonstrated to control the thermal expansion in open‐framework materials by adjusting the presence of guests.     

Host–guest complexation of antioxidative caffeic and ferulic acid amides with a functionalized cyclophane

Host?guest complexation has been studied by ¹H NMR on the benzyl and phenethyl amides of ferulic and caffeic acids as the guests in chloroform and acetonitrile; the counter host is a cyclophane which integrates four phenylene rings, amino and amide groups in the macrocyclic framework and bears four pendant methyl acetate ester arms. CAPE, one of the best known natural antioxidants, also has been studied for comparison. Among the guests studied, ferulic acid benzyl amide shows NMR shifts due to the formation of a host?guest complex in chloroform. The complexation occurs in two steps with the formation constants K ₁?=?[HG]/[H][G]?=?6?M^?1 and β ₂?=?[HG₂]/[H][G]²?=?87?M^?2. Two guest molecules are bound on the surface of the macrocyclic framework of a host molecule by two hydrogen bonds, NH(host amide)···O=C(guest amide) and C=O(host ester)···HO(guest phenol). The latter hydrogen bond may protect the bioactive site, i.e., phenol OH, of guest molecules captured in the complex against undesirable oxidation. This feature is observed only for ferulic acid benzyl amide in chloroform; the cyclophane ester interacts with this amide, distinctively from the other hydroxycinnamic acid derivatives.     

Glycoluril‐Derived Molecular Clips are Potent and Selective Receptors for Cationic Dyes in Water

Molecular clip 1 remains monomeric in water and engages in host–guest recognition processes with suitable guests. We report the K_a values for 32 1? guest complexes measured by ¹H NMR, UV/Vis, and fluorescence titrations. The cavity of 1 is shaped by aromatic surfaces of negative electrostatic potential and therefore displays high affinity and selectivity for planar and cationic aromatic guests that distinguishes it from CB[n] receptors that prefer aliphatic over aromatic guests. Electrostatic effects play a dominant role in the recognition process whereby ion–dipole interactions may occur between ammonium ions and the C=O groups of 1 , between the SO₃^? groups of 1 and pendant cationic groups on the guest, and within the cavity of 1 by cation–π interactions. Host 1 displays a high affinity toward dicationic guests with large planar aromatic surfaces (e.g. naphthalene diimide NDI+ and perylene diimide PDI+) and cationic dyes derived from acridine (e.g. methylene blue and azure A). The critical importance of cation–π interactions was ascertained by a comparison of analogous neutral and cationic guests (e.g. methylene violet vs. methylene blue; quinoline vs. N‐methylquinolinium; acridine vs. N‐methylacridinium; neutral red vs. neutral red H⁺) the affinities of which differ by up to 380‐fold. We demonstrate that the high affinity of 1 toward methylene blue (K_a=3.92×10⁷ m ^?1; K_d=25 nm ) allows for the selective sequestration and destaining of U87 cells stained with methylene blue.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Efficient syntheses of π-electron deficient macrocycles

ABSTRACT

Cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) cyclophane represents an ideal π-electron deficient macrocycles, which demonstrates the extraordinary ability of hosting a variety of π-electron-rich guests in its rigid, preorganised cavity. However, this macrocycle undergoes large ring strain and therefore its preparation is often low yielding. In order to increase its yields, high-dilution conditions and template-directed synthesis are employed, which are rather time-consuming, i.e. a few weeks including template removal. Herein, we attempt to solve these problems by either using click reaction, or decreasing the ring strain by using a flexible linker. Three analogues of CBPQT⁴⁺ ring were synthesised without the need of guest template, each of which contains two bipyridinium units. Two of these three macrocycles are able to recognise π-electron rich guests within their cavities. However, the one obtained via click reaction demonstrates low guest recognition ability.     

Induced‐Fit Binding of π‐Electron‐Donor Substrates to Macrocyclic Aromatic Ether Imide Sulfones: A Versatile Approach to Molecular Assembly

Novel macrocyclic receptors that bind electron‐donor aromatic substrates through π‐stacking donor–acceptor interactions are obtained by cycloimidisation of an amine‐functionalised aryl ether sulfone with pyromellitic and 1,4,5,8‐naphthalenetetracarboxylic dianhydrides. These macrocycles can form complexes with a wide variety of π‐donor substrates, including tetrathiafulvalene, naphthalene, anthracene, pyrene, perylene and functional derivatives of these polycyclic hydrocarbons. The resulting supramolecular assemblies range from simple 1:1 complexes to [2]‐ and [3]pseudorotaxanes and even (as a result of crystallographic disorder) an apparent polyrotaxane. Direct five‐component self‐assembly of a metal‐centred [3]pseudorotaxane is also observed on complexation of a macrocyclic ether imide with 8‐hydroxyquinoline in the presence of palladium(II) ions. Binding studies in solution were carried out by using ¹H NMR and UV/Vis spectroscopy, and the stoichiometries of binding were confirmed by Job plots based on the charge‐transfer absorption bands. The highest association constants were found for strong π‐donor guests with large surface areas, notably perylene and 1‐hydroxypyrene, for which K_a values of 1.4×10³ and 2.3×10³ M ^?1, respectively, were found. Single‐crystal X‐ray analyses of the receptors and their derived complexes reveal large induced‐fit distortions of the macrocyclic frameworks as a result of complexation. These structures provide compelling evidence for the existence of strong attractive forces between the electronically complementary aromatic π systems of host and guest.     

1,3‐Alternate Tetraamido‐Azacalix[4]arenes as Selective Anion Receptors

Six tetraaza[1.1.1.1]cyclophane derivatives bearing peripheral amide groups were prepared according to two distinct synthetic strategies that depend on the connection pattern between the aryl units. NMR experiments combined with the X‐ray structures of two tetraamide derivatives 4 b and 10 show that these cavitands adopt a 1,3‐alternate conformation both in solution and in the solid state. Consequently, the four amide groups of the aza[1.1.1.1]‐m,m,m,m‐cyclophane isomer 10 can contribute to the same recognition process towards neutral water molecules or anion guests. NMR experiments, mass spectrometry analyses and single‐crystal X‐ray structures confirm the anion‐binding ability of this receptor. Absorption spectrophotometric titrations in nonpolar solvents provided evidence for the selectivity of 10 to chloride anions in the halide series, with a corresponding association constant K_a reaching 2.5×10⁶ m ^?1.     

A Macrocycle Based on a Heptagon-Containing Hexa-peri-hexabenzocoronene

A cyclophane is reported incorporating two units of a heptagon-containing extended polycyclic aromatic hydrocarbon (PAH) analogue of the hexa-peri-hexabenzocoronene (HBC) moiety (hept-HBC). This cyclophane represents a new class of macrocyclic structures that incorporate for the first time seven-membered rings within extended PAH frameworks. The saddle curvature of the hept-HBC macrocycle units induced by the presence of the nonhexagonal ring along with the flexible alkyl linkers generate a cavity with shape complementarity and appropriate size to enable π interactions with fullerenes. Therefore, the cyclophane forms host–guest complexes with C₆₀ and C₇₀ with estimated binding constants of K_a=420±2 m ⁻¹ and K_a=(6.49±0.23)×10³ m ⁻¹, respectively. As a result, the macrocycle can selectively bind C₇₀ in the presence of an excess of a mixture of C₆₀ and C₇₀.     

Tri- and tetraurea piperazine cyclophanes: synthesis and complexation studies of preorganized and folded receptor molecules

A series of symmetrical tri‐ and tetrameric N‐ethyl‐ and N‐phenylurea‐functionalized cyclophanes have been prepared in nearly quantitative yields (86–99 %) from the corresponding tri‐ and tetraamino‐functionalized piperazine cyclophanes and ethyl or phenyl isocyanates. Their conformational and complexation properties have been studied by single‐crystal X‐ray diffraction, variable‐temperature NMR spectroscopy, and ESI‐MS analysis. The rigid 27‐membered trimeric cyclophane skeleton assisted by a seam of intramolecular hydrogen bonds results in a preorganized ditopic recognition site with an all‐syn conformation of the urea moieties that, complemented by a lipophilic cavity of the cyclophane, binds molecular and ionic guests as well as ion pairs. The all‐syn conformation persists in acidic conditions and the triprotonated triurea cyclophane binds an unprecedented anion pair, H₂PO₄^????HPO₄^2?, in the solid state. The tetra‐N‐ethylurea cyclophane is less rigid and demonstrates an induced‐fit recognition of diisopropyl ether in the solid state. The guest was encapsulated within the lipophilic interior of a quasicapsule, formed by intramolecular hydrogen‐bond‐driven folding of the 36‐membered cyclophane skeleton. In the gas phase, the essential role of the urea moieties in the binding was demonstrated by the formation of monomeric 1:1 complexes with K⁺, TMA⁺, and TMP⁺ as well as the ion‐pair complexes [KI+K]⁺, [TMABr+TMA]⁺ and [TMPBr+TMP]⁺. In the positive‐mode ESI‐MS analysis, ion‐pair binding was found to be more pronounced with the larger tetraurea cyclophanes. In the negative mode, owing to the large size of the binding site, a general binding preference towards larger anions, such as the iodide, over smaller anions, such as the fluoride, was observed.     

Switching Between Giant Positive and Negative Thermal Expansions of a YFe(CN)6-based Prussian Blue Analogue Induced by Guest Species

The control of thermal expansion of solid compounds is intriguing but remains challenging. The effect of guests on the thermal expansion of open-framework structures was investigated. Notably, the presence of guest ions (K⁺) and molecules (H₂O) can substantially switch thermal expansion of YFe(CN)₆ from negative (α_v=−33.67×10⁻⁶ K⁻¹) to positive (α_v=+42.72×10⁻⁶ K⁻¹)—a range that covers the thermal expansion of most inorganic compounds. The mechanism of such substantial thermal expansion switching is revealed by joint studies with synchrotron X-ray diffraction, X-ray absorption fine structure, neutron powder diffraction, and density functional theory calculations. The presence of guest ions or molecules plays a critical damping effect on transverse vibrations, thus inhibiting negative thermal expansion. An effective method is demonstrated to control the thermal expansion in open-framework materials by adjusting the presence of guests.     

New Cyclophanes as Initiator Cores for the Construction of Dendritic Receptors: Host-guest complexation in aqueous solutions and structures of solid-state inclusion compounds

Cyclophanes 3 and 4 were prepared as initiator cores for the construction of dendrophanes (dendritic cydophanes) 1 and 2 , respectively, which mimic recognition sites buried in globular proteins. The tetra-oxy[6.1.6.1]paracyclophane 3 was prepared by a short three-step route (Scheme 1) and possesses a cavity binding site shaped by two diphenylmethane units suitable for the inclusion of flat aromatic substrates such as benzene and naphthalene derivatives as was shown by ¹H-NMR binding titrations in basic D₂O phosphate buffer (Table 1). The larger cyclophane 4 , shaped by two wider naphthyl(phenyl)methane spacers, was prepared in a longer, ten-step synthesis (Scheme 2) which included as a key intermediate the tetrabromocyclophane 5 . ¹H-NMR Binding studies in basic borate buffer in D₂O/CD₃OD demonstrated that 4 is an efficient steroid receptor. In a series of steroids (Table 1), complexation strength decreased with increasing substrate polarity and increasing number of polar substituents; in addition, electrostatic repulsion between carboxylate residues of host and guest also affected the binding affinity strongly. The conformationally flexible tetrabromocyclophane 5 displayed a pronounced tendency to form solid-state inclusion compounds of defined stoichiometry, which were analyzed by X-ray crystallography (Fig. 2). 1,2-Dichloroethane formed a cavity inclusion complex 5a with 1:1 stoichiometry, while in the 1:3 inclusion compound 5b with benzene, one guest is fully buried in the macrocyclic cavity and two others are positioned in channels between the Cyclophanes in the crystal lattice. In the 1:2 inclusion compound 5c , two toluene molecules penetrate with their aromatic rings the macrocyclic cavity from opposite sides in an antiparallel fashion. On the other hand, p-xylene (= 1,4-dimethylbenzene) in the 1:1 compound 5d is sandwiched between the cyclophane molecules with its two Me groups penetrating the cavities of the two macrocycles. In the 1:2 inclusion compound 5e with tetralin (= 1,2,3,4-tetrahydronaphthalene), both host and guest are statically disordered. The shape of the macrocycle in 5a – e depends strongly on the nature of the guest (Fig. 4). Characteristic for these compounds is the pronounced tendency of 5 to undergo regular stacking and to form channels for guest inclusion; these channels can infinitely extend across the macrocyclic cavities (Fig. 6) or in the crystal lattice between neighboring cyclophane stacks (Fig. 5). Also, the crystal lattice of 5c displays a remarkable zig-zag pattern of short Br…?O contacts between neighboring macrocycles (Fig. 7).     

A Tunable Cyclic Container: Guest‐Induced Conformational Switching,Efficient Guest Exchange,and Selective Isolation of C70 from a Fullerene Mixture

An adaptable cyclic porphyrin dimer with highly flexible linkers has been used as an artificial molecular container that can efficiently encapsulate various aromatic guests (TCNQ/C₆₀/C₇₀) through strong π–π interactions by adjusting its cavity size and conformation. The planar aromatic guest (TCNQ) can be easily and selectively exchanged with larger aromatic guests (C₆₀/C₇₀). During the guest‐exchange process, the two porphyrin rings switch their relative orientation according to the size and shape of the guests. This behavior of the cyclic container has been thoroughly investigated by using UV/Vis spectroscopy, NMR spectroscopy, and X‐ray crystal structure determination of the host–guest assemblies. The electrochemical and photophysical studies demonstrated the occurrence of photoinduced electron transfer from bisporphyrin to TCNQ/C₆₀/C₇₀ in the respective host–guest assemblies. The cyclic host can form complexes with C₆₀ and C₇₀ with association constants of (2.8±0.2)×10⁵ and (1.9±0.3)×10⁸ m ⁻¹, respectively; the latter value represents the highest binding affinity for C₇₀ reported so far for zinc(II) bisporphyrinic receptors. This high selectivity for the binding of C₇₀ versus C₆₀ allows the easy extraction and efficient isolation of C₇₀ from a C₆₀/C₇₀ fullerene mixture. Experimental evidence was substantiated by DFT calculations.     

Kinetic investigation of gas‐phase reactions between the OH‐radical and o‐, m‐, p‐ethyltoluene and n‐nonane in air

We have carried out relative rate experiments (T = 294 ± 2 K, atmospheric pressure) to investigate the OH‐oxidation of o‐, m‐, and p‐ethyltoluene and n‐nonane (k₁, k₂, k₃, and k₄ respectively). The experiments were performed in a 2‐m³ smog chamber with Teflon coated walls. The rate constants obtained are (in cm³ molecule^?1 s^?1 with two sigma uncertainties): k₁ = (1.36 ± 0.07) × 10^?11; k₂ = (2.12 ± 0.26) × 10^?11; k₃ = (1.47 ± 0.04) × 10^?11, and k₄ = (0.95 ± 0.02) × 10^?11. The measured rate constants are in accordance with previously published data, so that a coherent group of values for the compounds studied can be established. Atmospheric implications, ozone, and particle production are discussed. In addition, we have determined the amount of o‐, m‐, and p‐ethyltoluenes in different types of gasoline. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 367–378 2004     

Rate coefficients for the gas‐phase reaction of OH radicals with selected dihydroxybenzenes and benzoquinones

Rate coefficients have been determined for the gas‐phase reaction of the hydroxyl (OH) radical with the aromatic dihydroxy compounds 1,2‐dihydroxybenzene, 1,2‐dihydroxy‐3‐methylbenzene and 1,2‐dihydroxy‐4‐methylbenzene as well as the two benzoquinone derivatives 1,4‐benzoquinone and methyl‐1,4‐benzoquinone. The measurements were performed in a large‐volume photoreactor at (300 ± 5) K in 760 Torr of synthetic air using the relative kinetic technique. The rate coefficients obtained using isoprene, 1,3‐butadiene, and E‐2‐butene as reference hydrocarbons are k_OH(1,2‐dihydroxybenzene) = (1.04 ± 0.21) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐3‐methylbenzene) = (2.05 ± 0.43) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐4‐methylbenzene) = (1.56 ± 0.33) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,4‐benzoquinone) = (4.6 ± 0.9) × 10⁻¹² cm³ s⁻¹, k_OH(methyl‐1,4‐benzoquinone) = (2.35 ± 0.47) × 10⁻¹¹ cm³ s⁻¹. This study represents the first determination of OH radical reaction‐rate coefficients for these compounds. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 696–702, 2000     

Rate coefficients for the reactions of OH with n‐propanol and iso‐propanol between 237 and 376 K

The rate coefficients for the reaction OH + CH₃CH₂CH₂OH → products (k₁) and OH + CH₃CH(OH)CH₃ → products (k₂) were measured by the pulsed‐laser photolysis–laser‐induced fluorescence technique between 237 and 376 K. Arrhenius expressions for k₁ and k₂ are as follows: k₁ = (6.2 ± 0.8) × 10^?12 exp[?(10 ± 30)/T] cm³ molecule^?1 s^?1, with k₁(298 K) = (5.90 ± 0.56) × 10^?12 cm³ molecule^?1 s^?1, and k₂ = (3.2 ± 0.3) × 10^?12 exp[(150 ± 20)/T] cm³ molecule^?1 s^?1, with k₂(298) = (5.22 ± 0.46) × 10^?12 cm³ molecule^?1 s^?1. The quoted uncertainties are at the 95% confidence level and include estimated systematic errors. The results are compared with those from previous measurements and rate coefficient expressions for atmospheric modeling are recommended. The absorption cross sections for n‐propanol and iso‐propanol at 184.9 nm were measured to be (8.89 ± 0.44) × 10^?19 and (1.90 ± 0.10) × 10^?18 cm² molecule^?1, respectively. The atmospheric implications of the degradation of n‐propanol and iso‐propanol are discussed. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 10–24, 2010