Preparation and Properties of Nickel and Iron Oxides obtained by Calcination of Layered Double Hydroxides

A constant pH precipitation method has been applied to obtain solids with Ni/Fe molar ratios of 2/1, 3/2, 1/1, 2/3, and 1/2. In all cases, a phase with the hydrotalcite‐like structure is obtained, containing Ni^II and Fe^III in the brucite‐like layers and carbonate in the interlayer, and, for samples with a Ni/Fe molar ratio lower than 2/1, amorphous hydrated iron oxides, undetected by X‐ray diffraction, are also formed. The solids have been characterized by element chemical analysis, powder X‐ray diffraction, differential thermal analysis, thermogravimetric and differential thermogravimetric analysis, FT‐IR spectroscopy, temperature‐programmed reduction and assessment of specific surface area by nitrogen adsorption at ?196 °C. In all cases reduction leads to zero‐valent state for the metals, reduced nickel particles probably favouring reduction of Fe^III species; the specific surface area increases with the iron content, probably due to the amorphous nature of the hydrated iron oxides formed. Calcination at 1200 °C in air leads to well crystallized solids, formed by NiFe₂O₄ spinel and, additionally, rocksalt‐type NiO for Ni/Fe ratios larger than 1/2. In this way, solids with tailored compositions of these two phases can be prepared.     

Bio‐safe synthesis of linear and branched PLLA

The catalytic activities of Bi(III) acetate (Bi(OAc)₃) and of creatinine towards the ring‐opening polymerization of L ‐lactide have been compared with those of a stannous (II) ethylhexanoate ((SnOct)₂)‐based system and with those of a system catalyzed by enzymes. All four were suitable catalysts for the synthesis of high and moderate molecular weight poly(L ‐lactide)s and the differences in reactivity and efficiency have been studied. Linear and branched poly(L ‐lactide)s were synthesized using these bio‐safe initiators together with ethylene glycol, pentaerythritol, and myoinositol as coinitiators. The polymerizations were performed in bulk at 120 and 140 °C and different reactivities and molecular weights were achieved by adding different amounts of coinitiators. A molecular weight of 105,900 g/mol was achieved with 99% conversion in 5 h at 120 °C with a Bi(OAc)₃‐based system. This system was comparable to Sn(Oct)₂ at 140 °C. The reactivity of creatinine is lower than that of Bi(OAc)₃ but higher compared with enzymes lipase PS (Pseudomonas fluorescens). A ratio of Sn(Oct)₂M_o/I_o 10,000:1 was needed to achieve a polymer with a reasonable low amount of tin residue in the precipitated polymer, and a system catalyzed by creatinine at 140 °C has a higher conversion rate than such a system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1214–1219, 2010     

Production of 5‐Hydroxymethylfurfural from Fructose in Ionic Liquid Efficiently Catalyzed by Cr(III)‐Al2O3 Catalyst

A series of metal‐Al₂O₃ catalysts were prepared simply by the conventional impregnation with Al₂O₃ and metal chlorides, which were applied to the dehydration of fructose to 5‐hydroxymethylfurfural (HMF). An agreeable HMF yield of 93.1% was achieved from fructose at mild conditions (100°C and 40 min) when employing Cr(III)‐Al₂O₃ as catalyst in 1‐butyl‐3‐methylimidazolium chloride ([Bmim]Cl). The Cr(III)‐Al₂O₃ catalyst was characterized via XRD, DRS and Raman spectra and the results clarified the interaction between the Cr(III) and the alumina support. Meanwhile, the reaction solvents ([Bmim]Cl) collected after 1^st reaction run and 5^th reaction run were analyzed by ICP‐OES and LC‐ITMS and the results confirmed that no Cr(III) ion was dropped off from the alumina support during the fructose dehydration. Notably, Cr(III)‐Al₂O₃ catalyst had an excellent catalytic performance for glucose and sucrose and the HMF yields were reached to 73.7% and 84.1% at 120°C for 60 min, respectively. Furthermore, the system of Cr(III)‐Al₂O₃ and [Bmim]Cl exhibited a constant stability and activity at 100°C for 40 min and a favorable HMF yield was maintained after ten recycles.     

Time‐Resolved High and Low Temperature Phase Transitions of the Nanocrystalline Cubic Phase in the Y2O3‐ZrO2 and Fe2O3‐ZrO2 System

The nanocrystalline cubic Phase of zirconia was found to be thermally stabilized by the addition of 2.56 to 17.65 mol % Y₂O₃ (5.0 to 30.0 mol % Y, 95.0 to 70.0 mol % Zr cation content). The cubic phase of yttria stabilized zirconia was prepared by thermal decomposition of the hydroxides at 400°C for 1 hr. 2.56 mol % Y₂O₃‐ZrO₂ was stable up to 800°C in an argon atmosphere. The samples with 4.17 to 17.65 mol % Y₂O₃ were stable to 1200°C and higher. All samples at temperatures between 1450°C to 1700°C were cubic except the sample with 2.56 mol % Y₂O₃ which was tetragonal. The crystallite sizes observed for the cubic phase ranged from 50 to 150 Å at temperatures below 900°C and varied from 600 to 800 nm between 1450°C and 1700°C. Control of furnace atmosphere is the main factor for obtaining the cubic phase of Y‐SZ at higher temperature. Nanocrystalline cubic Fe‐SZ (Iron Stabilized Zirconia) with crystallite sizes from 70 to 137 Å was also prepared at 400°C. It transformed isothermally at temperatures above 800°C to the tetragonal Fe‐SZ and ultimately to the monoclinic phase at 900°C. The addition of up to 30 mol % Fe(III) thermally stabilized the cubic phase above 800°C in argon. Higher mol % resulted in a separation of Fe₂O₃. The nanocrystalline cubic Fe‐SZ containing a minimum 20 mol % Fe (III) was found to have the greatest thermal stability. The particle size was a primary factor in determining cubic or tetragonal formation. The oxidation state of Fe in zirconia remained Fe³⁺. Fe‐SZ lattice parameters and rate of particle growth were observed to decrease with higher iron content. The thermal stability of Fe‐SZ is comparable with that of Ca‐SZ, Mg‐SZ and Mn‐SZ prepared by this method.     

Phosphorylated PEG (PPEG) as a new support for generation of nano‐Pd(0): application to the Heck–Mizoroki and Suzuki–Miyaura coupling reactions

Polyethylene glycols (PEGs) with different molecular weights (M_w = 200, 400, 1000) were phosphorylated to their bis‐diphenyl phosphinite derivatives as stable solids which are melted in the range 140–160°C. These phosphorylated PEGs were used as ligands and reducing agents to generate nano‐Pd(0) catalysts in 2.5–8.3 nm. The nano‐Pd(0) particles supported on phosphorylated PEG₂₀₀ were applied for the efficient Heck–Mizoroki carbon–carbon coupling reactions of ArX (X = Cl, Br, I) at 80–100°C under solvent‐free conditions and for the Suzuki–Miyaura coupling reaction in ethanol at 70°C. The catalyst was recycled easily and reused for several runs. Copyright © 2013 John Wiley & Sons, Ltd.     

Trapping of Tricarbonyl(η1,η2‐homoallyl)iron and Tricarbonyl(η3‐allyl)iron Anion Intermediates with 2‐(Phenylsulfonyl)‐3‐phenyloxaziridine

The addition of reactive carbanions to (η⁴‐1,3‐diene)Fe(CO)₃ complexes at ?78 °C and 25 °C produced putative homoallyl and allyl anion complexes, respectively. Reaction of the reactive intermediates with 2‐(phenylsulfonyl)‐3‐phenyloxaziridine afforded nucleophilic substituted (η⁴‐1,3‐diene)Fe(CO)₃ complexes.     

Reactivity of Ammonium Halides: Action of Ammonium Chloride and Bromide on Iron and Iron(III) Chloride and Bromide

Ammonium chloride and bromide, (NH₄)Cl and (NH₄)Br, act on elemental iron producing divalent iron in [Fe(NH₃)₂]Cl₂ and [Fe(NH₃)₂]Br₂, respectively, as single crystals at temperatures around 450 °C. Iron(III) chloride and bromide, FeCl₃ and FeBr₃, react with (NH₄)Cl and (NH₄)Br producing the erythrosiderites (NH₄)₂[Fe(NH₃)Cl₅] and (NH₄)₂[Fe(NH₃)Br₅], respectively, at fairly low temperatures (350 °C). At higher temperatures, 400 °C, iron(III) in (NH₄)₂[Fe(NH₃)Cl₅] is reduced to iron(II) forming (NH₄)FeCl₃ and, further, [Fe(NH₃)₂]Cl₂ in an ammonia atmosphere. The reaction (NH₄)Br + Fe (4:1) leads at 500 °C to the unexpected hitherto unknown [Fe(NH₃)₆]₃[Fe₈Br₁₄], a mixed‐valent Fe^II/Fe^I compound. Thermal analysis under ammonia and the conditions of DTA/TG and powder X‐ray diffractometry shows that, for example, FeCl₂ reacts with ammonia yielding in a strongly exothermic reaction [Fe(NH₃)₆]Cl₂ that at higher temperatures produces [Fe(NH₃)]Cl₂, FeCl₂ and, finally, Fe₃N.     

Quantitative Estimation of Ruthenium(III) Using Morpholine-4-Carbodithioate as a New Analytical Reagent

Ruthenium(III) has been precipitated gravimetrically in the pH range 7.0-8.5 with morpholine-4-carbodithioate and determined by weighing as a black complex (C₅H₆ONS₂)₃ Ru after drying at l00–110°C. The interference of the various metal ions has been avoided by using an ammonical mixture of EDTA and tartrate (1:1 molar ratio). The complex is thermally stable up to l60°C.     

Effect of synthesis conditions on the preparation of titanium dioxides from peroxotitanate solution and their photocatalytic activity

Nanosized TiO₂ particles were prepared by the hydrothermal method from the amorphous powders which were precipitated in an aqueous peroxotitanate solution. The physical properties of the nanosized TiO₂ particles prepared were investigated. We also examined the activity of TiO₂ particles as a photocatalyst on the decomposition of orange II. The titania sol can be successfully crystallized to the anatase phase through hydrothermal aging at temperatures higher than 160°C. The particle size increases from 18 to 26 nm as the synthesis temperature increases from 140 to 200°C. Titania particles prepared at 180°C show the highest activity, and titania particles calcined at 400°C show also the highest activity on the photocatalytic decomposition of orange II.     

Crystalline Materials with Large Channels or Cavities – Synthesis and Crystal Structure of an Iron(III) tetra(4‐carboxyphenyl)‐porphine

Tetra(4‐carboxyphenyl)‐porphine iron(III) chloride · 2 CH₃COOH · 4 H₂O ( 1 ) was prepared via a hydrothermal synthesis approach starting from FeCl₂ and 5,10,15,20‐tetrakis‐(4‐carboxyphenyl)‐21 H,23 H‐porphine in glacial acetic acid in the presence of KOH as a base and ytterbium(III) acetate as a template. Compound 1 was characterized by single crystal X‐ray diffraction and elemental analysis. Space group: P 1, Z = 2, unit cell dimensions at 200 K: a = 9.282(2), b = 20.239(5), c = 22.239(5) Å, α = 92.49(3), β = 99.87(3), γ = 90.78(3)°, R₁ (observed) = 0.132, wR₂ (all data) = 0.395. The architecture of the structure is determined by interporphyrin hydrogen bonding. Four iron porphyrin units form a very wide open channel with dimensions of circa 15.7 Å × 15.7 Å. No interpenetrating is observed.     

(Meta)stabiles CaC2

(Meta)stable CaC₂ One out of four modifications of CaC₂ is the so‐called metastable Calcium Carbide, CaC₂‐III, which was synthesized as pure material. It forms by heating monoclinic CaC₂‐II (C2/c) above 150 °C and remains stable after cooling down to room temperature. The structure was refined from X‐ray powder patterns (C2/m, Z = 4, a = 722.6(1) pm, b = 385.26(7) pm, c = 737.6(1) pm, β = 107.345(2)°). After grinding CaC₂‐III transforms back into CaC₂‐II. Heating CaC₂‐III induces a reversible phase transition into the cubic modification (CaC₂‐IV) at 460 °C. Differences between the three different structures of CaC₂ I–III, being stable at ambient conditions are also shown by ¹³C‐MAS‐NMR measurements, especially the presence of two distinct types of carbon atoms in the structure of the title compound.     

Common Features in the Crystal Structures of the Compounds Bis(dimethylstibanyl)oxane and ‐sulfane,and the Minerals Valentinite and Stibnite (Grauspießglanz)

Bis(dimethylstibanyl)oxane ( 1 ) and ‐sulfane ( 2 ), the two simplest organoelement species with an Sb–E–Sb fragment (E = O, S), were prepared by alkaline hydrolysis of bromodimethylstibane and by oxidation of tetramethyldistibane with sulfur [18], respectively. As shown by an x‐ray structure analysis of compound 1 (m. p. < –20 °C; P2₁2₁2₁, a = 675.9(2), b = 803.1(2), c = 1666.8(4) pm at –70 ± 2 °C; Z = 4; R1 = 0.042), the molecules (O–Sb 198.8 and 209.9 pm, Sb–O–Sb 123.0°) adopt a syn‐anti conformation in the solid state and are arranged in zigzag chains along [010] via weak intermolecular O‥Sb interactions (258.5 pm, Sb–O‥Sb 117.8°, O‥Sb–O 173.5°) making use, however, of only one Me₂Sb moiety. Primary and secondary bond lengths and angles agree very well with corresponding values published for valentinite, the orthorhombic modification of antimony(III) oxide [3]. Bis(dimethylstibanyl)sulfane ( 2 ) (m. p. 29 to 31 °C) crystallizes in the uncommon space group P6₅22 (a = 927.8(3), c = 1940.9(7) pm at –100 ± 2 °C; Z = 6; R1 = 0.021). Owing to coordination numbers of (1 + 1) and (2 + 2) for both Me₂Sb groups and the sulfur atom, respectively, molecules with an approximate syn‐syn conformation (S–Sb 249.8 pm, Sb–S–Sb 92.35°) build up a three‐dimensional net of double helices which are linked together by Sb‥S contacts (316.4 pm). These parameters shed more light onto the rather complicated structure and bonding situation in stibnite (antimony(III) sulfide [4]). The molecular packing of compound 2 is compared with the structures of relevant inorganic solids, especially with that of β‐quartz [37].     

Uniform particles of manganese compounds obtained by forced hydrolysis of manganese(II) acetate

 Procedures for the preparation at low temperature (80 °C) of uniform colloids consisting of Mn₃O₄ nanoparticles (about 20 nm) or elongated α-MnOOH particles with length less than 2 μm and width 0.4 μm or less, based on the forced hydrolysis of aqueous manganese(II) acetate solutions in the absence (Mn₃O₄) or the presence (α-MnOOH) of HCl are described. These solids are only produced under a very restrictive range of reagent concentrations involving solutions of 0.2–0.4 mol dm⁻³ manganese(II) acetate for Mn₃O₄ and of 1.6–2 mol dm⁻³ Mn(II) and 0.2–0.3 mol dm⁻³ HCl for α-MnOOH. The role that the acetate anions play in the precipitation of these solids is analyzed. It seems that these anions promote the oxidation of Mn(II) to Mn(III), which readily hydrolyze causing precipitation. The evolution of the characteristics of the powders with temperature up to 900 °C is also reported. Thus, Mn₃O₄ particles transform to Mn₂O₃ upon calcination at 800 °C; this is accompained by a sintering process. The α-MnOOH sample also experiences several phase transformations on heating. First, it is oxidized at low temperatures (250–450 °C) giving MnO₂ (pyrolusite), which is further reduced to Mn₂O₃ at 800 °C. After this process the particles still retain their elongated shape. Received: 19 October 1999 Accepted: 24 November 1999     

Structures and Properties of Novel Mononuclear Iron(III) Complexes with Benzimidazole Containing Tripodal Tetradentate Ligands

The iron(III) complexes of the tripodal benzimidazole‐containing ligands tris(2‐benzimidazolylmethyl)amine (ntb), bis(2‐benzimidazolylmethyl)(2‐hydroxyethyl)‐amine (bbimae) and tris(5,6‐dimethyl‐2‐benzimidazolylmethyl)amine (me₂ntb) are structural and functional models for intradiol cleaving catechol dioxygenases. The complexes [Fe(ntb)Cl₂]Cl · 3 CH₃OH ( 1 ; P 1, a = 9.830(2) Å, b = 12.542(3) Å, c = 13.139(3) Å, α = 82.88(3)°, β = 73.45(3)°, γ = 85.53(3)°, V = 1539.2(6) ų; Z = 2) and [Fe(bbimae)Cl₂]Cl ( 2 ; P2₁/n, a = 7.461(2) Å, b = 18.994(5) Å, c = 14.515(4) Å, β = 98.22(2)°, V = 2035.8(9) ų, Z = 4) have been characterized by X‐ray crystallography and spectroscopic methods. In the octahedrally coordinated complexes two cis coordination sites – essential for catechol binding – are occupied by chloride ligands. The significant intradiol cleaving catechol dioxygenase activity of the model complexes was examined using 3,5‐di‐tert‐butylcatechol as a substrate.     

Solid‐state CP/MAS 13C NMR studies on conformational polymorphism in sertraline hydrochloride,an antidepressant drug

The C(2) isotropic chemical shift values in solid‐state CP/MAS ¹³C NMR spectra of conformational polymorphs Form I (δ 28.5) and III (δ 22.9) of (1S,4S)‐sertraline HCl ( 1 ) were correlated with a γ‐gauche effect resulting from the respective 162.6° antiperiplanar and 68.8° (+)‐synclinal C(2)? C(1)? N? CH₃ torsion angles as measured by X‐ray crystallography. The similarity of the solution‐state C(2) chemical shifts in CD₂Cl₂ (δ 22.8) and DMSO‐d₆ (δ 23.4) with that for Form III (and other polymorphs having C(2)? C(1)? N? CH₃ (+)‐synclinal angles) strongly suggests that a conformational bias about the C(1)? N bond exists for 1 in both solvents. This conclusion is supported by density functional theory B3LYP/6‐31G(d)‐calculated relative energies of C(1)? N rotameric models: (kcal) 0.00 [73.8 °C(2)? C(1)? N? CH₃ torsion angle], 0.88 (168.7°), and 2.40 (?63.4°). A Boltzmann distribution of these conformations at 25 °C is estimated to be respectively (%) 80.3, 18.3, and 1.4. Copyright © 2002 John Wiley & Sons, Ltd.     

3‐Deoxy‐β‐d‐ribo‐hexopyranose (3‐deoxy‐β‐d‐glucopyranose)

The β‐pyranose form, (III), of 3‐deoxy‐d ‐ribo‐hexose (3‐deoxy‐d ‐glucose), C₆H₁₂O₅, crystallizes from water at 298 K in a slightly distorted ⁴C₁ chair conformation. Structural analyses of (III), β‐d ‐glucopyranose, (IV), and 2‐deoxy‐β‐d ‐arabino‐hexopyranose (2‐deoxy‐β‐d ‐glucopyranose), (V), show significantly different C—O bond torsions involving the anomeric carbon, with the H—C—O—H torsion angle approaching an eclipsed conformation in (III) (−10.9°) compared with 32.8 and 32.5° in (IV) and (V), respectively. Ring carbon deoxygenation significantly affects the endo‐ and exocyclic C—C and C—O bond lengths throughout the pyranose ring, with longer bonds generally observed in the monodeoxygenated species (III) and (V) compared with (IV). These structural changes are attributed to differences in exocyclic C—O bond conformations and/or hydrogen‐bonding patterns superimposed on the direct (intrinsic) effect of monodeoxygenation. The exocyclic hydroxymethyl conformation in (III) (gt) differs from that observed in (IV) and (V) (gg).     

A structural systematic study of four isomers of difluoro‐N‐(3‐pyridyl)benzamide

The four isomers 2,4‐, (I), 2,5‐, (II), 3,4‐, (III), and 3,5‐difluoro‐N‐(3‐pyridyl)benzamide, (IV), all with formula C₁₂H₈F₂N₂O, display molecular similarity, with interplanar angles between the C₆/C₅N rings ranging from 2.94 (11)° in (IV) to 4.48 (18)° in (I), although the amide group is twisted from either plane by 18.0 (2)–27.3 (3)°. Compounds (I) and (II) are isostructural but are not isomorphous. Intermolecular N—H...O=C interactions form one‐dimensional C(4) chains along [010]. The only other significant interaction is C—H...F. The pyridyl (py) N atom does not participate in hydrogen bonding; the closest H...N_py contact is 2.71 Å in (I) and 2.69 Å in (II). Packing of pairs of one‐dimensional chains in a herring‐bone fashion occurs viaπ‐stacking interactions. Compounds (III) and (IV) are essentially isomorphous (their a and b unit‐cell lengths differ by 9%, due mainly to 3,4‐F₂ and 3,5‐F₂ substitution patterns in the arene ring) and are quasi‐isostructural. In (III), benzene rotational disorder is present, with the meta F atom occupying both 3‐ and 5‐F positions with site occupancies of 0.809 (4) and 0.191 (4), respectively. The N—H...N_py intermolecular interactions dominate as C(5) chains in tandem with C—H...N_py interactions. C—H...O=C interactions form R₂²(8) rings about inversion centres, and there are π–π stacks about inversion centres, all combining to form a three‐dimensional network. By contrast, (IV) has no strong hydrogen bonds; the N—H...N_py interaction is 0.3 Å longer than in (III). The carbonyl O atom participates only in weak interactions and is surrounded in a square‐pyramidal contact geometry with two intramolecular and three intermolecular C—H...O=C interactions. Compounds (III) and (IV) are interesting examples of two isomers with similar unit‐cell parameters and gross packing but which display quite different intermolecular interactions at the primary level due to subtle packing differences at the atom/group/ring level arising from differences in the peripheral ring‐substitution patterns.     

Effect of hydration temperature on the structure reconstruction of MgAlY layered materials

This contribution investigates the obtaining of layered double hydroxides (LDHs) modified with different concentrations of yttrium and the effect of the yttrium concentration and temperature during the rehydration of the mixed oxides derived from these solids. Mg₃Al_(1?x)Y_x-LDH (where x = 0.04–0.6) have been prepared using the standard coprecipitation method under low supersaturation conditions. After the calcination of these solids (460 °C, 18 h), the corresponding mixed oxides were obtained. The reconstruction of the layered structure was attempted by rehydration of the mixed oxides under two different conditions: (1) at 25 °C and (2) at 70 °C. All the aforementioned solids have been characterized by chemical analysis, X-ray diffraction, DRIFTS spectra, N₂ adsorption–desorption isotherms, and determination of base sites. Their catalytic activity was tested in cyanoethylation of ethanol with acrylonitrile. The results obtained after the characterization and the catalytic activity tests were compared with those obtained for a standard hydrotalcite Mg₃Al.     

Thermal Characterization and Physico-Chemical Properties of Fe2O3−Mn2O3/Al2O3 Systems

The effect of ferric and manganese oxides dopants on thermal and physicochemical properties of Mn-oxide/Al₂O₃ and Fe₂O₃/Al₂O₃ systems has been studied separately. The pure and doped mixed solids were thermally treated at 400–1000°C. Pyrolysis of pure and doped mixed solids was investigated via thermal analysis (TG-DTG) techniques. The thermal products were characterized using XRD-analysis. The results revealed that pure ferric nitrate decomposes into Fe₂O₃ at 350°C and shows thermal stability up to1000°C. Crystalline Fe₃O₄ and Mn₃O₄phases were detected for some doped solids precalcined at 1000°C. Crystalline γ-Al₂O₃ phase was detected for all solids preheated up to 800°C. Ferric and manganese oxides enhanced the formation of α-Al₂O₃ phase at1000°C. Crystalline MnAl₂O₄ and MnFe₂O₄ phases were formed at 1000°C as a result of solid–solid interaction processes. The catalytic behavior of the thermal products was tested using the decomposition of H₂O₂ reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mössbauer study of the thermal decomposition of alkali tris(oxalato)ferrates(III)

The thermal decomposition of alkali (Li,Na,K,Cs,NH₄) tris(oxalato)ferrates(III) has been studied at different temperatures up to 700°C using Mössbauer, infrared spectroscopy, and thermogravimetric techniques. The formation of different intermediates has been observed during thermal decomposition. The decomposition in these complexes starts at different temperatures, i.e., at 200°C in the case of lithium, cesium, and ammonium ferrate(III), 250°C in the case of sodium, and 270°C in the case of potassium tris(oxalato)ferrate(III). The intermediates, i.e., Fe¹¹C₂O₄, K₆Fe¹¹₂(ox)₅. and Cs₂Fe¹¹ (ox)₂(H₂O)₂, are formed during thermal decomposition of lithium, potassium, and cesium tris(oxalato)ferrates(III), respectively. In the case of sodium and ammonium tris(oxalato)ferrates(III), the decomposition occurs without reduction to the iron(II) state and leads directly to α-Fe₂O₃.