A Simple QD–FRET Bioprobe for Sensitive and Specific Detection of Hepatitis B Virus DNA

We report here a simple quantum dot-FRET (QD-FRET) bioprobe based on fluorescence resonance energy transfer (FRET) for the sensitive and specific detection of hepatitis B virus DNA (HBV DNA). The proposed one-pot HBV DNA detection method is very simple, rapid and convenient due to the elimination of the washing and separation steps. In this study, the water-soluble CdSe/ZnS QDs were prepared by replacing the trioctylphosphine oxide on the surface of QDs with mercaptoacetic acid (MAA). Subsequently, DNA was attached to QDs surface to form the functional QD-DNA bioconjugates by simple surface ligand exchange. After adding 6-carboxy-X-rhodamine (ROX)-modified HBV DNA (ROX-DNA) into the QD-DNA bioconjugates solution, DNA hybridization between QD-DNA bioconjugates and ROX-DNA was formed. The resulting hybridization brought the ROX fluorophore, the acceptor, and the QDs, the donor, into proximity, leading to energy transfer from QDs to ROX. When ROX-DNA was displaced by the unlabeled HBV DNA, the efficiency of FRET was dramatically decreased. Based on the changes of both fluorescence intensities of QDs and ROX, HBV DNA could be detected with high sensitivity and specificity. Under the optimized conditions, the linear range of HBV DNA determination was 2.5 – 30 nmol L^?1, with a correlation coefficient (R) of 0.9929 and a limit of detection (3σ black) of 1.5 nmol L^?1. The relative standard deviation (R.S.D.) for 12 nmol L^?1 HBV DNA was 0.9 % (n?=?5). There was no interference to non-complementary DNA. Time-resolved fluorescence spectra and fluorescence images were performed to verify the validity of this method and the results were satisfying.     

Photoinduced relaxation processes in self-assembling complexes from CdSe/ZnS water-soluble nanocrystals and cationic porphyrins

Particular features and quenching mechanisms of exciton luminescence of water-soluble nanocomposites that are formed as a result of the interaction of surface charged semiconductor quantum dots (QDs) CdSe/ZnS (d _CdSe = 2.8 nm) and cationic porphyrins (H₂TMPyrP⁴⁺ and ZnTMPyrP⁴⁺) have been studied theoretically and experimentally. It has been found that, in CdSe/ZnS??Porphyrin conjugates, there occurs long-range inductive resonance electronic excitation energy transfer from surface modified (with thioglycolic or mercaptoundecanoic acid) QDs to porphyrins, which is accompanied by quenching of the exciton luminescence of QDs and an increase in the fluorescence intensity of porphyrin. It has been shown that, when mercaptoundecanoic acid is used as a QD shell, the QD luminescence quenching efficiency by porphyrins follows the F?rster-Galanin theory and depends on the overlap integral between the CdSe/ZnS luminescence band and the absorption spectra of free-base porphyrin H₂TMPyrP⁴⁺ and its metal complex ZnTMPyrP⁴⁺. It has been revealed that, as the QDs ? Zn-porphyrin intercenter distance decreases from 39.1 (mercaptoundecanoic acid) to 30.1), a considerable QD luminescence quenching is observed; however, the energy transfer efficiency substantially decreases, from 55% in the former case to 23% in the latter one. Based on the spectral-luminescent data and quantum-chemical calculations, it has been found that the chemical change of H₂TMPyrP⁴⁺ in the structure of the complex with CdSe/ZnS QDs passivated by thioglycolic or mercaptoundecanoic acid is caused by the formation of a metal complex ZnTMPyrP⁴⁺. Based on calculations of the redox-potentials, it has been concluded that the low luminescence quantum yield of CdSe/ZnS QDs passivated by residues of mercaptocarboxylic acids S^?(CH₂) _n COO^? and its dependence on the number of CH₂ groups are related to the possibility of photoinduced electron transfer from the HOMO of passivating molecules to QDs (QD* ? S^?(CH₂)nCOO^? hole transfer). It has been shown that the quenching of the exciton luminescence of QDs in heterogeneous structures CdSe/ZnS(thioglycolic acid)??ZnTMPyrP⁴⁺, which is complementary to the energy transfer, can be caused by the photoinduced electron transfer that involves the participation of the LUMO of the ZnTMPyrP⁴⁺ molecule (QD* ? ZnTMPyrP⁴⁺).     

ZnS薄膜参数对有机/无机复合发光器件特性的影响

半导体量子点(QDs)具有发光效率高和发光波长可调等特点。采用胶体CdSe QDs作电致发光器件的有源材料,TPD(N,N′-biphenyl-N,N′-bis-(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine)作空穴传输层,ZnS作电子传输层,研究了有机/无机复合发光器件ITO/TPD/CdSe QDs/ZnS/Ag的电致发光特性。TPD和CdSe QDs薄膜采用旋涂方法、ZnS薄膜采用磁控溅射方法沉积,器件表面平整。CdSe QDs的光致发光和电致发光谱峰位波长均位于～580 nm,属于量子点的带边激子发光。我们与以前的ITO/ZnS/CdSe QDs/ZnS/Ag发光器件结构进行了对比,发现新的器件结构的电致发光谱没有观察到QDs表面态的发光,而且新器件的发光强度是ITO/ZnS/CdSe QDs/ZnS/Ag结构的～10倍。发光效率的提高归因于碰撞激发与载流子注入两种发光机制并存的结果：一方面电子经过ZnS 层加速后,碰撞激发CdSe QDs发光;另一方面,空穴从TPD层注入CdSe QDs 与QDs中激发的电子复合发光。我们进一步研究了ZnS电子加速层厚度对发光特性的影响,选择ZnS薄膜的厚度分别是80,120 和160 nm,发现随着ZnS层厚度增大,器件启亮电压升高,EL强度增大,但是击穿电压降低。EL峰位随着ZnS厚度的减小发生明显蓝移,对上述实验现象进行了机理解释。     

Controlled extracellular biosynthesis of ZnS quantum dots by sulphate reduction bacteria in the presence of hydroxypropyl starch as a mediator

Metal sulphide quantum dots (QDs) have broad applications. Sulphate-reducing bacteria (SRB) have been recognized as synthesizers of metal sulphides, with the characteristics of a high-production efficiency and easy product harvest. However, SRB are incapable of synthesizing metal sulphide QDs. In the present study, cheap hydroxypropyl starch (HPS) was used to assist SRB in manufacturing the ZnS QDs. The results exhibited that the HPS accelerated the growth of SRB and reduction of SO₄ ²⁺ into S^2?, while it blocked the precipitation between S^2? and Zn²⁺ to control the nucleation and growth of ZnS, resulting in the formation of ZnS QDs. When the HPS concentration increased from 0.2 to 1.6 g/L, the average crystal size (ACS) of ZnS QDs dropped from 5.95 to 3.34 nm, demonstrating the controlled biosynthesis of ZnS QDs. The ZnS QDs were coated or adhered to by both HPS and proteins, which played an important role in the controlled biosynthesis of ZnS QDs. The remarkable blue shift of the narrow UV absorption peak was due to the quantum confinement effect. The sequential variation in the colour of the photoluminescence spectrum (PL) from red to yellow suggested a tunable PL of the ZnS QDs. The current work demonstrated that SRB can fabricate the formation of ZnS QDs with a controlled size and tunable PL at a high-production rate of approximately 8.7 g/(L × week) through the simple mediation of HPS, with the yield being 7.46 times the highest yield in previously reported studies. The current work is of great importance to the commercialization of the biosynthesis of ZnS QDs.     

Facile synthesis of near-infrared CuInS<Subscript>2</Subscript>/ZnS quantum dots and glycol-chitosan coating for in vivo imaging

This study describes the synthesis method of water-soluble, low-toxicity, photostable highly luminescent probes based on I–III–VI₂ type semiconductor quantum dots (QDs) and the possibility of tumor targeting in living animals. Cd-free high-quality CuInS₂/ZnS core/shell QDs were synthesized, and their surfaces were reacted with mercaptoundecanoic acid for aqueous phase transfer followed by reaction with glycol-chitosan; lastly, Arg-Gly-Asp (RGD) integrin-binding peptide was covalently attached for in vivo tumor targeting. Dowtherm A, a highly viscous heat-transfer organic fluid, was used to control semiconductor crystal growth at high temperature (>230 °C) during organic synthesis. The structural and optical properties of the resulting CuInS₂/ZnS QDs were investigated. The average diameters of CuInS₂ and CuInS₂/ZnS QDs were 3.0 and 3.7 nm, respectively. Cell toxicity and in vivo tumor targetability in RR1022 cancer cell-xenografted mice were further evaluated using cRGDyk-tagged glycol-chitosan-coated CuInS₂/ZnS QDs. Glycol-chitosan-coated MUA-QDs displayed a Z-average diameter of 203.8 ± 7.67 nm in water by dynamic light scattering.

Open image in new window

Graphical abstract In vivo tumor targeting using cRGDyk-tagged glycol-chitosan-coated MUA-CuInS₂/ZnS QDs nanoparticles

     

Complex formation of CdSe/ZnS/TOPO nanocrystal vs. molecular chaperone in aqueous solution by hydrophobic interaction

Feasibilities to stabilize CdSe/ZnS/trioctylphosphineoxide (TOPO) nanocrystals (quantum dots, QDs) in aqueous solutions with prefoldin macromolecules in their bioactive states are reported. Prefoldin is a jellyfish-shaped hexameric co-chaperone of the group II chaperonins. As a protein folding intermediate is captured within its central cavity, so CdSe/ZnS/TOPO QDs would also be included within this cavity. It is also found the QDs can be much more dispersed in aqueous solutions and suspended for certain period of time by adding trace amount of t-butanol in the buffer prior to the mixing of the QDs mother solution. While biochemical procedures are evaluated with ordinary fluorescence measurements, possible complex formations are also evaluated with TIRFM single-molecule detection techniques.     

Specific features of luminescence quenching in a nematic liquid crystal doped with nanoparticles

The change in the intensity of the photoluminescence (PL) spectra of nematic liquid crystal (NLC) composites as a function of the concentration of CdSe/ZnS semiconductor quantum dots (QDs) and TiO₂ and ZrO₂ nanoparticles ~5 nm in diameter has been investigated. It is shown that the PL-quenching intensity in composites with CdSe/ZnS QDs exceeds that in composites with TiO₂ and ZrO₂ nanoparticles. The lowfrequency spectra of these composites with a concentration of 0.1 wt %, recorded in the range of 10²–10³ Hz, and the content of mobile ions in them have been investigated. It is found that the dielectric loss in the composite with CdSe/ZnS QDs is much higher and the content of mobile ions is larger by a factor of 3 than in the composites with TiO₂ and ZrO₂ nanoparticles. It is shown that an increase in the CdSe/ZnS QD concentration in NLC composites leads to an increase in the dielectric loss and a decrease in the PL intensity. Possible mechanisms of the interaction between NLC molecules and CdSe/ZnS QDs are discussed.     

Size controlled synthesis of semiconductor nanocrystals in a continuous-flow mode microcapillary reactor

A microcapillary reactor with 320 μm inner diameter was utilized for CdSe nanoparticle synthesis. The influence of the reaction temperature and flow rate of precursors on the size and size distribution of prepared CdSe nanoparticles was systematically studied. The as-prepared nanoparticles exhibit sharp excitonic absorption and photoluminescence peak (FWHM 30 nm) with a quantum-yield around 10–40%. The microcapillary reactor was also used for CdSe/ZnS core-shell nanoparticle synthesis in continuous-flow mode. The quantum yield of the core-shell nanoparticles was found to be considerably influenced by the reactor temperature and have a close correlation with the thickness of ZnS shell under growth. An optimized quantum yield up to 70% was obtained for the CdSe/ZnS core-shell nanoparticles.     

Single molecule FRET detection in CdSe-QD donor and Cy5-labeled molecular chaperone acceptor complex by imaging microscopy

We report single molecule spectroscopic evidence of FRET in CdSe quantum dot (QD) conjugated with Cy5-labeled molecular chaperone systems in buffer solutions. Donor QDs are core-shell type nanocrystals covered with organic surfactants on their outermost surfaces, i.e. CdSe/ZnS/TOPO’s. As prototype molecular chaperones, we adopt prefoldins (PFDs), on which Cy5’s are labeled as acceptors. Donor QDs possess two-fold degenerate emission dipoles perpendicular to the c-axis, due to their Wurtzite crystal structures, while acceptor Cy5’s possess linear absorption and emission dipoles. Thus, their combination provides novel features to those in conventional FRET systems. PFDs are jellyfish-shaped hexameric co-chaperones of group II chaperonins, which recognize hydrophobic portions of denatured proteins and encapsulate them within their central cavities. Hence, PFDs will also capture the CdSe/ZnS/TOPO QDs due to its surface similarity to the denatured proteins. By introducing simple microscope setup for single QD-PFD-Cy5 spectroscopy, we have successfully captured the emission spectra in FRET regime. We also have observed peculiar features in time evolution profiles of single QD emissions conjugated with Cy5-labeled PFDs under polarization modulation measurements. Notable point of our hybrid conjugates is that they are biochemically in living action. We describe our present results in relation to possible protein reactions.     

Synthesis,biocompatibility and luminescence properties of quantum dots conjugated with amino acid-functionalized β-cyclodextrin

A series of CdSe and CdSe/CdS quantum dots (QDs) labeled with amino acid-modified β-cyclodextrin (β-CD) was prepared by a simple ultrasonic method. These amino acid-modified β-CD-coated QDs are very soluble and stable in biological buffer. They also have high colloidal stability and strong optical emission properties that are similar to those of untreated tri-n-octylphosphine oxide (TOPO)-coated QDs. The quantum yields (QYs) of these amino acid-modified β-CD-coated CdSe and CdSe/CdS QDs in biological buffer were found to be very high. In particular, the QYs of the positively charged l-His-β-CD-coated CdSe/CdS QDs were as high as 33.5±1.8%. In addition, the fluorescence lifetime of these QDs was also very long in PBS solutions as determined by frequency domain spectroscopy. For example, the lifetime of l-His-β-CD-coated CdSe/CdS QDs was 8.6 ns. The in vitro cytotoxicity of these QDs in ECV-304, SH-SY5Y and HeLa cells was found to be lower. l-His-β-CD-coated CdSe/CdS QDs were the least cytotoxic (IC₅₀ 95.6±3.2 mg mL^?1 in ECV-304 cells after 48 h). The flow cytometry results show that the positively charged amino acid led to a considerable increase in biocompatibility of QDs. This may be attributed to the presence of an amino acid-modified β-CD outer layer, which enhanced the biocompatibility.     

Re-charging the luminescence states in CdSe/ZnS quantum dots at the conjugation to Osteopontin antibodies

The paper presents the original study of photoluminescence (PL) and Raman scattering spectra of core–shell CdSe/ZnS quantum dots (QDs) covered by the amine-derivatized polyethylene glycol (PEG) with luminescence interface states. First commercially available CdSe/ZnS QDs with emission at 640 nm (1.94 eV) covered by PEG polymer have been studied in nonconjugated states. PL spectra of nonconjugated QDs are characterized by a superposition of PL bands related to exciton emission in a CdSe core and to the hot electron–hole recombination via high energy luminescence states. The study of high energy PL bands in QDs at different temperatures has shown that these PL bands are related to luminescence interface states at the CdSe/ZnS or ZnS/polymer interface. Then CdSe/ZnS QDs have been conjugated with biomolecules—the Osteopontin antibodies. It is revealed that the PL spectrum of bioconjugated QDs changed essentially with decreasing hot electron–hole recombination flow via luminescence interface states. It is shown that the QD bioconjugation process to Osteopontin antibodies is complex and includes the covalent and electrostatic interactions between them. The variation of PL spectra due to the bioconjugation is explained on the basis of electrostatic interaction between the QDs and biomolecule dipoles that stimulates re-charging QD interface states. The study of Raman scattering of bioconjugated CdSe/ZnS QDs has confirmed that the antibody molecules have the electric dipoles. It is shown that CdSe/ZnS QDs with luminescence interface states are promising for the study of bioconjugation effects with specific antibodies and can be a powerful technique in biology and medicine.     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

The Dynamic Resistance of CdS/CdSe/ZnS Co-Sensitized TiO2 Solar Cells

Quantum dots' sensitized solar cells (QDSSCs) can create the high-performance and low-cost photovoltaic in the future. In this study, we synthesized the film of TiO₂/CdS/CdSe/ZnS photoanodes by successive ionic layer adsorption reaction (SILAR) method. The absorption spectra, photoluminescent spectra and electrochemical impedance spectra (EIS) of the film TiO₂/CdS/CdSe/ZnS photoanodes show that the structure of energy levels in the conduction band (CB) of photoanode materials CdS, CdSe, and ZnS quantum dots (QDs) can absorb a great number of photons in each region and inject stimulated electrons quickly into the conduction band (CB) of TiO₂. Furthermore, we also studied the influence of the SILAR cycles on the dynamic resistance, the lifetime of electrons in QDSSCs through Nyquist and Bode.     

脂溶性CdSe/ZnS量子点脂质体复合物的制备及表征

在油相中成功合成了脂溶性CdSe/ZnS核壳量子点纳米粒,粒径平均为4.5 nm,量子产率达29%,发射波长为540 nm。通过薄膜分散法,以蛋黄卵磷脂、胆固醇为膜材,将脂溶性的CdSe/ZnS核壳量子点包覆于脂质体磷脂双分子层中,由于磷脂分子的两亲性,使得脂溶性的CdSe/ZnS核壳量子点同时又具有亲水性。通过透射电镜对脂质体形态进行了表征,倒置荧光显微镜证实了发光CdSe/ZnS核壳量子点成功包埋于脂质体双分子层中,包裹的发光CdSe/ZnS核壳量子点具有更稳定的发光及抗光漂白性质。     

The influence of intrinsic and surface states on the emission properties of colloidal nanocrystals

Time Resolved Photoluminescence (TRPL) measurements on the picosecond time scale (temporal resolution of 17 ps) on colloidal CdSe and CdSe/ZnS Quantum Dots (QDs) were performed, to elucidate the role of intrinsic and surface states on the emission process. Transient PL spectra reveal three emission peaks with different lifetimes (60 ps, 460 ps and 9–10 ns, from the bluest to the reddest peak). The energy separations among the states, together with their characteristic decay times, allow us to attribute the two higher energy peaks to ±1^U and ±1^L bright states of the fine structure picture of spherical CdSe QDs, and the third one to surface states emission, respectively. We show that the contribution of surface emission to the PL results to be different for the two samples studied (67% in the CdSe QDs and 32% in CdSe/ZnS QDs), confirming the decisive role of the ZnS shell in the improvement of the surface passivation.     

Spectroscopic study of oscillator strength and radiative decay time of colloidal CdSe quantum dots

Characterization of samples of cadmium selenide quantum dots (CdSe) QDs dissolved in toluene colloidal solutions at a concentration of 1.4 mg/ml was carried out through UV–Vis absorption and photoluminescence (PL) spectroscopy. The size-dependent absorption and red-shifted PL emission peak wavelengths could be tuned between 510–576 and 545–606 nm respectively. Optical absorption spectral measurements yielded CdSe QDs having diameters about ~ 2.44–3.69 nm with energy gaps 2.32–2.08 eV which are higher than the bulk CdSe (1.74 eV) reminiscent of quantum confinement. This is found to be in good agreement with the semi-empirical pseudopotential model. In addition, the first excitonic absorption transition 1S_(e)1S_3/2(h) oscillator strength and the corresponding fluorescence radiative decay time of CdSe QDs are assessed using relevant Einstein relations for absorption and emission in a two-level system. The elaborated calculations would anticipate that the transition oscillator scale with the CdSe QD radius as ~ R^2.54. Correspondingly, the calculated radiative decay times decrease from 56.4 to 23.2 ns which scale with CdSe QDs radius as ~ R^?2.155 in fairly good agreement with experimental values reported in the literature.     

Mercaptopropionic acid capped CdSe/ZnS quantum dots as fluorescence probe for lead(II)

MPA stabilized CdSe/ZnS NCs was applied as a fluorescent probe for the sensitive detection of Pb²⁺ in water. The microreaction was demonstrated as a facile method for the reproducible synthesis of CdSe/ZnS NCs with a high quantum yield. The good stability of CdSe/ZnS NCs was proved by the significant maintaining of photoluminescent (PL) after the ligand exchange with MPA, and was further demonstrated by the excellent PL property in water solution with various pH values. The cation exchange of Zn with Pb led to the linear quenching of PL with the concentration of Pb²⁺, which provided as an opportunity to apply MPA stabilized CdSe/ZnS NCs as fluorescent probes for Pb²⁺. A facile method by adjustment of QDs concentration was demonstrated as a suitable way to approach different detection limits. The detection limits of 0.03 and 3.3 μM were achieved by setting QDs solutions with the absorbance of the first exciton peak as 0.05 and 0.15, respectively.     

Selective synthesis of clinoatacamite Cu2(OH)3Cl and tenorite CuO nanoparticles by pH control

To investigate the shell deposited kinetics, CdSe quantum dots (QDs) and nanorods (NRs) with a maximum length of 17 nm were fabricated via organic synthesis routes. CdSe with a hexagonal crystal structure (wurtzite) favors epitaxial growth on the {002} surfaces when well-controlled conditions were used. The morphologies and sizes of CdSe samples depended strongly on chemicals and temperature. In the case of 320 °C, CdSe NRs with adjusted length of 7–17 nm were obtained from trioctylphosphine oxide (TOPO) and tetradecylphosphonic acid (TDPA). In contrast, short CdSe NRs (less than 10 nm) were created from octadecylphosphonic acid (ODPA) and trioctylamine (TOA). Spherical CdSe QDs were further fabricated using stearic acid (SA) and TOPO at 300 °C. CdSe cores were coated with Cd_0.5Zn_0.5S and CdTe shells. Anisotropic growth occurred during shell deposition because CdS shells grown preferentially on the {001} facet of the CdSe core. In the case of CdSe core prepared from TOPO and TDPA, CdSe/Cd_0.5Zn_0.5S core/shell samples prepared from long CdSe NRs (more than 10 nm) revealed a peanut morphology while the core/shell samples created from short ones (less than 10 nm) exhibited a spherical morphology. All of the CdSe/Cd_0.5Zn_0.5S core/shell samples revealed a similar length to that of the CdSe cores. This phenomenon was also observed for the core/shell samples fabricated using CdSe NRs prepared by ODPA and TOA. This is ascribed to the well-developed crystal structure of CdSe NRs fabricated using an organic synthesis at high temperature. In contrast, this anisotropic growth did not occur when spherical CdSe QDs prepared from SA and TOPO and the shell (Cd_0.5Zn_0.5S) coating carried out using SA and TOA. To indicate the shell depositing process, CdSe NRs fabricated using TDPA and TOPO were coated with a CdTe shell. CdTe monomers were deposited on the middle and tip parts of the CdSe NRs to form a tetrapod-like morphology at 220 °C. This is ascribed to the large difference of structure of CdSe (hexagonal) and CdTe (zinc blende).     

硒化镉发光量子点的制备及其在有机发光器件中的应用

硒化镉量子点具有随粒径尺寸改变,而产生发光波长调变的特性,目前已被广泛研究。本研究是由化学溶胶法合成不同粒径尺寸的核壳型CdSe／ZnS硒化镉量子点,其表面包覆十六烷基胺,避免分子团聚现象。在由硒化镉成核温度的控制,成功地制备一系列具有各种尺寸粒径的核壳型硒化镉量子点(2—6nm)。本研究也合成了含有纳米金粒子于核壳型硒化镉量子点,实验结果发现：硒化镉发光效率明显的提高。在有机发光器件的应用方面,将发光波长为505nm核壳型CdSe／ZnS量子点掺入溶有发光波长为570nm铱化合物的氯仿溶液时,其溶液的光致发光光谱表明,原量子点的发光特性消失,只有铱化合物的发光依然存在,且其发光强度呈现明显增强趋势,我们推测此现象源自于量子点到铱化合物能量转移的机制。我们也以含有核壳型硒化镉量子点的铱化合物与PVK混合材料为发光层,成功的制作发光二极管器件,器件的发光效率因核壳型硒化镉的掺杂,明显提高2倍多。     

Circular dichroism spectroscopy of chlorin <Emphasis Type="Italic">e</Emphasis>6 and its complexes with quantum dots in different media

The circular dichroism (CD) spectra of chlorin e6 and its complexes with ZnS:Mn/ZnS and CdSe/ZnS quantum dots (QDs) in aqueous solutions with different pH, in methanol, and in dimethyl sulfoxide (DMSO) have been experimentally investigated. The changes in the CD spectra of free chlorin e6 caused by its complexing with semiconductor QDs are analyzed. The application of CD spectroscopy made it possible to record for the first time the CD spectrum of luminescent dimer of chlorin e6 and reveal a nonluminescent aggregate of chlorin e6 (interpreted preliminary as a “tetramer”), the anisotropy factor of which exceeds that of its monomer by a factor of 40. An analysis of the experimental data shows that chlorin e6 in a complex with QDs can be either in the monomeric form or in the form of a nonluminescent “tetramer.” The interaction with a relatively low-stable luminescent dimer of chlorin e6 with QDs leads to its partial monomerization and formation of complexes where chlorin e6 is in the monomeric form.