SnO2@MWCNT nanocomposite as a high capacity anode material for sodium-ion batteries

We report the synthesis and characterization of SnO₂@multiwalled carbon nanotubes (MWCNTs) nanocomposite as a high capacity anode material for sodium-ion battery. SnO₂@MWCNT nanocomposite was synthesized by a solvothermal method. SEM and TEM analyses show the uniform distribution of SnO₂ nanoparticles on carbon nanotubes. When applied as anode materials in Na-ion batteries, SnO₂@MWCNT nanocomposite exhibited a high sodium storage capacity of 839 mAh g^− 1 in the first cycle. SnO₂@MWCNT nanocomposite also demonstrated much better cycling performance than that of bare SnO₂ nanoparticles and bare MWCNTs. Furthermore, the nanocomposite electrode also showed a good cyclability and an enhanced Coulombic efficiency on cycling.     

Mesoporous organo-silica nanoarray for energy storage media

A SnO₂–mesoporous organo-silica nanoarray (MOSN) composite was prepared by surfactant mediated synthesis combined with a sol–gel vacuum suction method in which SnO₂ has been successfully incorporated inside the periodic nanoholes in the MOSN or coated on its surface. The MOSN with a high aspect ratio of length to width could not only maintain its structure but also effectively accommodate the volume expansion of the SnO₂ during electrochemical reactions with Li⁺. The SnO₂–MOSN composite showed a higher reversible capacity of 420 mA h g⁻¹ with greatly improved capacity retention and lower initial irreversible capacity compared to SnO₂ powder. This interesting anodic performance of SnO₂–MOSN composite supports the potential use of MOSN for lithium ion batteries.     

Anatase TiO2 nanosheet: An ideal host structure for fast and efficient lithium insertion/extraction

Anatase TiO₂ nanosheets with largely exposed (0 0 1) facets have been synthesized by a modified method. Exploitation of these nanosheets as a host structure for reversible lithium insertion/extraction has been investigated. It is found that these TiO₂ nanosheets manifest much lower initial irreversible losses compared to other anatase TiO₂ nanostructures, and excellent cycling performance at a charge–discharge rate as high as 20 C. The superior reversible lithium storage capability can be attributed to the ultrathin nanosheet structure: a large exposed effective area and a very short diffusion path. It thus attests the promising use of these anatase TiO₂ nanosheets in high-power lithium–ion batteries.     

A lotus root-like porous nanocomposite polymer electrolyte

A lotus root-like porous nanocomposite polymer electrolyte (NCPE) based on poly(vinylidene difluoride-co-hexafluoropropylene) [P(VDF-HFP)] copolymer and TiO₂ nanoparticles was easily prepared by a non-solvent induced phase separation (NIPS) process. The formation mechanism of the lotus root-like porous structure is explained by a qualitative ternary phase diagram. The resulting NCPE had a high ionic conductivity up to 1.21 × 10⁻³ S cm⁻¹ at room temperature, and exhibited a high electrochemical stability potential of 5.52 V (vs. Li/Li⁺), lithium ion transference number of 0.65 and 22.89 kJ mol⁻¹ for the apparent activation energy for transportation of ions. It is of great potential application in polymer lithium ion batteries.     

Superior storage performance of carbon nanosprings as anode materials for lithium-ion batteries

Carbon nanosprings (CNSs) with spring diameter of ～140 nm, carbon ring diameter of ～100 nm and pitch distance of ～150 nm, synthesized by using a catalytic chemical vapor deposition technology, have been investigated for potential applicability in lithium batteries as anode materials. The electrochemical results demonstrate that the present CNSs are superior anode materials for rechargeable lithium-ion batteries with high-rate capabilities, as well as long-term cycling life. At a current density as high as 3 A g^?1, CNSs can still deliver a reversible capacity of 160 mA h g^?1, which is about six times larger than that of graphite and three times larger than that of multi-wall carbon nanotubes under the same current density. After hundreds of cycles, there is no significant capacity loss for CNSs at both low and high current densities. The much improved electrochemical performances could be attributed to the nanometer-sized building blocks as well as the unusual spring-like morphology.     

Tremella-like molybdenum dioxide consisting of nanosheets as an anode material for lithium ion battery

Tremella-like structured MoO₂ consisting of nanosheets was obtained via a Fe₂O₃-assisted hydrothermal reduction of MoO₃ in ethylenediamine aqueous solution. The as-prepared product was characterized and tested with scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and capacity measurement as anode material for lithium ion batteries. This structured MoO₂ shows very high reversible capacity (>600 mA h g⁻¹), good rate capability and cycling performance, presenting potential application as anode material for lithium ion batteries with high rate capability and high capacity.     

Atomic layer coating to mitigate capacity fading associated with manganese dissolution in lithium ion batteries

Ultrathin surface coatings (< 5 nm) on electrodes have been developed to mitigate the capacity decay induced by manganese (Mn) dissolution, a limiting factor for Mn-based oxide electrode materials in lithium ion batteries. We demonstrated that the capacity decay was attributed to the Mn deposited on the graphite electrode accelerating the electrolyte decomposition. While the Al₂O₃ coating on the positive electrode suppressed the Mn dissolution, we found that the Al₂O₃ coating on the negative electrode was counter-intuitively more beneficial and efficient in preventing the Mn deposition and achieving excellent capacity retention in lithium ion batteries.     

A hierarchical micro/nanostructured 0.5Li2MnO3·0.5LiMn0.4Ni0.3Co0.3O2 material synthesized by solvothermal route as high rate cathode of lithium ion battery

A hierarchical micro/nanostructured Li-rich layered 0.5Li₂MnO₃·0.5LiMn_0.4Ni_0.3Co_0.3O₂ (H-LMNCO) material is prepared for the first time through the development of a solvothermal method, and served as cathode of lithium ion batteries. Electrochemical tests indicate that the H-LMNCO exhibits both a high reversible capacity and an excellent rate capability. The reversible discharge capacity of the H-LMNCO has been measured as high as 300.1 mAh·g^− 1 at 0.2 C rate. When the rate is increased to 10 C, the discharge capacity could still maintain a high value of 163.3 mAh·g^− 1. The results demonstrate that the developed solvothermal route is a novel synthesis strategy of preparing high rate performance Li-rich layered cathode material for lithium ion batteries.     

Designing high-capacity cathode materials for sodium-ion batteries

Na-rich layered oxides as cathode materials for sodium-ion batteries were designed using an electrochemical method based on Li-rich layered oxides. The materials show high specific capacity that can reach 234 mAh/g at a current of 5 mA/g. The energy density of this material (644 Wh/kg) is even higher than those of commercial cathodes for lithium-ion batteries, such as LiFePO₄ and LiMn₂O₄. Kinetic analysis of Na⁺ insertion/extraction into/from the Na-rich layered oxide reveals that the Na⁺ diffusion coefficient is about 10^− 14 cm²/s.     

SnO2 meso-scale tubes: One-step,room temperature electrodeposition synthesis and kinetic investigation for lithium storage

SnO₂ meso-scale tubes were synthesized by anodic electrochemical deposition under ambient conditions. Controlled self-bubbling O₂ acted as both the template and the oxidizing agent for obtaining SnO₂ tube structures at the interface of the gas (O₂) and the liquid (electrolyte). Electrochemical testing showed that the meso-scale tubes have higher discharge capacity and better rate capability than the “microbowls” produced by varying the deposition conditions. From the Arrhenius plot, the apparent activation energies were calculated to be 58.4 and 90.1 kJ mol^?1 for the meso-scale tubes and the microbowls, respectively, indicating that the meso-scale structure allows shorter diffusion routes for the lithium ions or for easier interaction with lithium.     

Preparation and electrochemical lithium storage of flower-like spinel Li4Ti5O12 consisting of nanosheets

In this paper, flower-like spinel Li₄Ti₅O₁₂ consisting of nanosheets was synthesized by a hydrothermal process in glycol solution and following calcination. The as-prepared product was characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction and cyclic voltammetry. The capacity of the sample used as anode material for lithium ion battery was measured. This structured Li₄Ti₅O₁₂ exhibited a high reversible capacity and an excellent rate capability of 165.8 m Ahg⁻¹ at 8 C, indicating potential application for lithium ion batteries with high rate performance and high capacity.     

Phosphatization: A promising approach to enhance the performance of mesoporous TiO2 anode for lithium ion batteries

We report phosphatization is a promising method to enhance the performance of mesoporous TiO₂ anode for lithium ion batteries. The resulting phosphated mesoporous TiO₂ possessed higher reversible capacity and better cycling stability than the pure mesoporous TiO₂. When cycled at 30 mA/g between 3.0 and 1.0 V, the initial capacity of phosphate mesoporous TiO₂ was 249 mA h/g, significantly higher than that of pure mesoporous TiO₂ (204 mA h/g). After 40 cycles, the capacity retention ratio of phosphate mesoporous TiO₂ reached 83.7%, while pure mesoporous TiO₂ had merely a capacity retention ratio of 62.3%. We believe that this phosphatization process could be used to enhance the electrochemical performance of other metal oxides for lithium ion batteries.     

Investigation of immiscible alloy system of Al–Sn thin films as anodes for lithium ion batteries

The Al–Sn, which is immiscible alloy, film was prepared by e-beam deposition to explore the possibility as anode material for lithium ion batteries for the first time. The film has a complex structure with tiny Sn particles dispersed homogeneously in the Al active matrix. The diffusion coefficients of Li⁺ in these Al–Sn alloy films were determined to be 2.1–3.2 × 10⁻⁸ cm²/s by linear sweep voltammetry. The film electrode with high Al content (Al–33wt%Sn) delivered a high initial discharge capacity of 972.8 mA h g⁻¹, while the film electrode with high Sn content (Al–64wt%Sn) with an initial discharge capacity of 552 mA h g⁻¹ showed good cycle performance indicated by retaining a capacity of about 381 mA h g⁻¹ after 60 cycles. Our preliminary results demonstrate that Al–Sn immiscible alloy is a potential candidate for anodic material of lithium ion batteries.     

Sol–gel preparation and electrochemical performances of LiFe1/3Mn1/3Co1/3PO4/C composites with core–shell nanostructure

LiFe_1/3Mn_1/3Co_1/3PO₄/C solid solution was prepared via a poly(ethylene glycol) assisted sol–gel method and exploited as cathode materials for lithium ion batteries. X-ray diffraction patterns indicate that LiFe_1/3Mn_1/3Co_1/3PO₄/C is crystallized in an orthorhombic structure. The scanning electron microscopy and transmission electron microscopy show that the particles are about 200 nm with a uniform carbon coating of about 8 nm in thickness to form a core–shell nanostructure. During charge–discharge cycles, LiFe_1/3Mn_1/3Co_1/3PO₄/C presented three plateaus corresponding to Fe³⁺/Fe²⁺, Mn³⁺/Mn²⁺ and Co³⁺/Co²⁺ redox couples, and a discharge capacity of 150.8 mAh g^?1 in the first cycle, remaining 121.2 mAh g^?1 after 30 cycles. Core–shell structure can optimize the performances of polyoxoanionic materials for lithium ion batteries.     

Titania nanotube supported tin anodes for lithium intercalation

A new type of nanostructured titania nanotube supported tin anode was prepared for lithium ion batteries. The as-prepared titania nanotubes are in the anatase phase with diameters of about 12 nm. Tin nanoparticles are dramatically decorated on the titania nanotubes and have a particle size of about 10 nm. This new structure promises good retention of reversible capacity on cycling for lithium intercalation. By charge/discharge measurements, the reversible capacity of the titania nanotubes supported tin anode for lithiation and de-lithiation was found to be 312 mA h/g (cycled between 0.05 and 2.0 V) and 203 mA h/g (cycled between 0.05 and 1.3 V) after 50 cycles with around 100% columbic efficiency.     

Partially reduced SnO2 nanoparticles anchored on carbon nanofibers for high performance sodium-ion batteries

One-dimensional (1-D) carbon nanofibers anchored with partially reduced SnO₂ nanoparticles (SnO₂/Sn@C) were successfully synthesized through a simple electrospinning method followed by carbon coating and thermal reduction processes. The partially reduced Sn frameworks, combined with the carbon fibers, provide a more favorable mechanism for sodiation/desodiation than SnO₂. As a result, SnO₂/Sn@C exhibits a high reversible capacity (536 mAh g^− 1 after 50 cycles) and an excellent rate capability (396 mAh g^− 1 even at 2 C rate) when evaluated as an anode material for sodium-ion batteries (SIBs).     

Comparison of the electrochemical properties of metallic layered nitrides containing cobalt,nickel and copper in the 1 V–0.02 V potential range

We report the first example of an intercalation compound based on the nitrogen framework in which lithium can be intercalated and deintercalated. A comparison of the structural and electrochemical properties of the ternary lithium cobalt, nickel and copper nitrides is performed. Vacancy layered structures of ternary lithium nitridocobaltates Li_3−2xCo_xN and nitridonickelates Li_3−2xNi_xN with 0.10 ⩽ x ⩽ 0.44 and 0.20 ⩽ x ⩽ 0.60, respectively, are proved to reversibly intercalate Li ions in the 1 V–0.02 V potential range. These host lattices can accommodate up to 0.35 Li ion par mole of nitride. Results herein obtained support Li insertion in vacancies located in Li₂N⁻ layers while interlayer divalent cobalt and nickel cations are reduced to monovalent species. No structural strain is induced by the insertion–extraction electrochemical reaction which explains the high stability of the capacity in both cases. For the Li_1.86Ni_0.57N compound, a stable faradaic yield of 0.30 F/mol, i.e. 130 mAh/g, is maintained at least for 100 cycles. Conversely, the ternary copper nitrides corresponding to the chemical composition Li_3−xCu_xN with 0.10 ⩽ x ⩽ 0.40 do not allow the insertion reaction to take place due to the presence of monovalent copper combined with the lack of vacancies to accommodate Li ions. In the latter case, the discharge of the lithium copper nitrides is not reversible.     

A Fe-rich sodium iron orthophosphate as cathode material for rechargeable batteries

Phosphate compounds have been intensively investigated as cathode materials for sodium ion batteries. Here we report the synthesis and electrochemical performance of a novel iron-rich sodium iron orthophosphate. This new compound was synthesized by a conventional solid state reaction method, and was found to be electrochemically active, delivering a reversible capacity of 85 mAhg^− 1 at an average voltage of c.a. 3.0 V vs. Na/Na⁺. Besides, the desodiated phase can be (de)intercalated by lithium ions when assembled into a lithium cell. Our discovery will open up the scope of phosphate family and reveal the importance of off-stoichiometric compounds as cathode materials.     

Self-assembled Li4Ti5O12/TiO2/Li3PO4 for integrated Li–ion microbatteries

This work aims to maximize the number of active sites for energy storage per geometric area, by approaching the investigation to 3D design for microelectrode arrays. Self-organized Li₄Ti₅O₁₂/TiO₂/Li₃PO₄ composite nanoforest layer (LTL) is obtained from a layer of self organized TiO₂/Li₃PO₄ nanotubes. The electrochemical response of this thin film electrode prepared at 700 °C exhibited lithium insertion and de-insertion at 1.55 and 1.57 V respectively, which is the typical potential found for lithium titanates. The effects of lithium phosphate on lithium titanate are explored for the first time. By cycling between 2.7 and 0.75 V the LTL/LiFePO₄ full cell delivered 145 mA h g^− 1 at an average potential of 1.85 V leading to an energy density of 260 W h kg^− 1 at C/2. Raman spectroscopy revealed that the γ-Li₃PO₄/lithium titanate structure is preserved after prolonged cycling. This means that Li₃PO₄ plays an important role for enhancing the electronic conductivity and lithium ion diffusion.     

A novel anode material of antimony nitride for rechargeable lithium batteries

Antimony nitride thin film has been successfully fabricated by magnetron sputtering method and its electrochemistry with lithium was investigated for the first time. The reversible discharge capacity of Sb₃N/Li cells cycled between 0.3 V and 3.0 V was found above 600 mAh/g. By using transmission electron microscopy and selected area electron diffraction measurements, the conversion reaction of Sb₃N into Li₃Sb and Li₃N was revealed during the lithium electrochemical reaction of Sb₃N thin film electrode. The high reversible capacity and the good cycleability made Sb₃N one of promising anode materials for future rechargeable lithium batteries.