Bulk properties and hydration numbers of components of water–salt,water–urea,and water–urea–salt systems

With an increase in the concentration of additives, the hydration numbers of compounds decrease. Thus, in a saturated 54.6% solution, urea loses approximately 3/4 of the initial amount of water, forming an aquacomplex of the composition (NH₂)₂CO?H₂O. In a supersaturated 44% solution, the sodium chloride aquacomplex is dehydrated by 2/3, and in a supersaturated 67% solution, sodium sulfate is dehydrated by 5/6. The density of these solutions is 1.354÷1.360 g/cm³ (44% NaCl) and 1.800÷1.849 g/cm³ (67% Na₂SO₄). In a saturated urea solution, NaNO₃, NaCl, and Na₂SO₄ complexes lose 53÷55% of hydration water. It is shown that the interactions in the binary water–urea system somewhat increase the hydration number of the salts (structural hydration). The hydration water density, a structurally important characteristic, increases in the series of solutions of urea, NaNO₃, NaCl, and Na₂SO₄. In the same series of additives, the excess volume of binary water–urea and water–salt systems becomes more negative.     

Synthesis,characterization, and systematic structure–property investigation of a series of carbazole–thiophene derivatives

Russian Journal of General Chemistry - A series of carbazole–thiophene oligomers linked at the 3,6-positions of the carbazole fragment of 4,4′-bis(carbazol-9-yl)biphenyl (CBP) and...     

Studies of chemical–catalytic formation of Ni–Re (Mo,W)–B alloys

The paper briefly reviews the studies of the processes of formation of Ni–Re–B, Ni–Mo–B, and Ni–W–B triple alloys using the method of chemical–catalytic reduction of metal ions and their properties.     

Design,synthesis, and characterization of fullerene–peptide–steroid covalent hybrids

The present study reports the synthesis, spectral characterization, self-assembly properties, and preliminary in vitro study of antioxidant capacity of two triple covalent hybrids consisting of fullerene C₆₀, peptide, and steroidal moiety. Previously synthesized fulleropyrrolidinic acid and pregnenolone were connected by peptide linker using a multistep DCC/DMAP and/or EDC/HOBT esterification/amidation procedure. The hybrids were characterized by comparative analysis of spectroscopic data obtained from FTIR, UV–vis, HRMS, and extensive NMR experiments (¹H, ¹³C, COSY, HSQC, and HMBC). The self-assembling properties and morphology of triads samples prepared by drop-drying method were examined by scanning electron microscopy (SEM). Preliminary in vitro antioxidant activity was studied by Ferrous ion Oxidation-Xylenol orange (FOX) method.     

Reinvestigation of the paracetamol–caffeine,aspirin–caffeine,and paracetamol–aspirin phase equilibria diagrams

Many drug candidates are poorly soluble. The formation of solid dispersion can improve their solubility, consequently their bioavailability. For this purpose, the use of eutectic mixtures is well known in the pharmaceutical field. At the eutectic composition, both components are in reduced particle size and well dispersed. In this work, we focus on the combination of paracetamol, aspirin, and caffeine, which is highly effective for the treatment of migraine headache pain. We have reinvestigated the paracetamol–caffeine, aspirin–caffeine, and paracetamol–aspirin phase equilibria diagrams taking into account the polymorphism of caffeine, paracetamol, and aspirin. The three phase diagrams are determined using X-ray diffraction and the differential scanning calorimetry from the binary mixtures. It is concluded that the paracetamol–caffeine and aspirin–caffeine systems are similar and exhibit two invariants, one eutectic and one metatectic. The paracetamol–aspirin phase diagram reveals the formation of one eutectic. The composition of the three eutectics formed is confirmed by the related Tamman’s triangles. No compound formation is found in the three systems.     

Reactivity of the Ge–H,Sn–H,P–H,and Se–H Bonds in Radical Abstraction Reactions

The experimental data for the liquid- and gas-phase reactions of atoms and radicals with organoelement compounds R _{n – 1}E–H

Analysis of Deoxynivalenol,Nivalenol, Zearalenone in Food by LC–APCI–MS

The detection of mycotoxins is an important task for analytical analysis, as they are a source of contaminants in foods today. The very small amounts of toxic mycotoxins (zearalenone, deoxynivalenol) make it important to determine the most reliable analytical methods. There are several options for the detection of mycotoxins, LC–API–MS techniques being the most common ones. The aim of the present determination is to give an overview on the application of LC–(API)-MS in the analysis of frequently occurring and highly toxic mycotoxins, such as deoxynivalenol, nivalenol and zearalenone, in organic foods. The limits of these three toxins in foods are very low: deoxynivalenol 1,250 μg kg^?1, nivalenol 0.9 μg kg^?1 of body weight, zearalenone 100 μg kg^?1.     

Use of an Orthogonal System, RP-LC–HILIC, for Evaluation of Purity

The reliability of evaluation of compound purity depends on the analytical method selected. A suitable analytical method, including the modes of separation and detection, can provide reliable information about compound purity. Effective separation is the key to achieving precise results. In this work we developed a novel method, based on an orthogonal system, RP-LC-hydrophilic interaction liquid chromatography, for evaluating the purity of compounds isolated by preparative reversed-phase liquid chromatography. Because of its good orthogonality, good separation and more accurate assessment of compound purity could be achieved.     

Electrodeposition,properties, and composition of rhenium–nickel alloys

The process of deposition of the Re–Ni alloy, its current efficiency, and the alloy composition are studied as a function of the current density and the solution temperature. The hydrogen content in the deposits, their surface morphology, internal structure, and properties as the cathodic material for HER are examined. It is assumed that besides the high rhenium content, the high catalytic activity of nickel–rhenium alloys is associated with the high degree of their structural disordering.     

Solvothermal preparation,and characterization,of Cu–Ag nanoparticles

Cu–Ag nanoparticles have been successfully synthesized by one-pot solvothermal treatment of a mixture of AgNO₃ and Cu(OAc)₂·H₂O in ethylene glycol solution at 180 °C for 10 h. The samples were characterized by UV–visible absorption, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectroscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed that Cu–Ag nanoparticles and a small amount of phase-separated Cu–Ag alloy nanoparticles with an average diameter of 100 ± 30 nm were synthesized by the solvothermal treatment procedure. The mechanism of formation is discussed.     

Application of CE–ICP–MS and CE–ESI–MS in metalloproteomics: challenges,developments, and limitations

Application of capillary electrophoresis (CE) as a high-resolution separation technique in metalloproteomics research is critically reviewed. The focus is on the requirements and challenges involved in coupling CE to sensitive element and molecule-specific detection techniques such as inductively coupled plasma mass spectrometry (ICP–MS) or electrospray ionisation mass spectrometry (ESI–MS). The complementary application of both detection techniques to the structural and functional characterisation of metal-binding proteins and their structural metal-binding moieties is emphasised. Beneficial aspects and limitations of mass spectrometry hyphenated to CE are discussed, on the basis of the literature published in this field over the last decade. Recent metalloproteomics applications of CE are reviewed to demonstrate its potential and limitations in modern biochemical speciation analysis and to indicate future directions of this technique.     

Electrodeposition,Structure, and Properties of Iron–Tungsten Alloys

The electrodeposition, structure, and properties of Fe–W alloys are studied. Working current densitiesirange from 1 to 5 A dm^–2at 50°C. The W content (45 wt %) barely depends oni. The current efficiency is about 40%. Alloys obtained at ibelow 2 A dm^–2are crystalline oversaturated solid solutions of W in Fe and are magnetic. Higher current densities yield amorphous nonmagnetic alloys of the same composition. Either alloy has a very high resistivity (nearly 300 ohm cm) and, after a treatment at 500–600°C, transforms into a more equilibrium binary system comprising a saturated solid solution and an intermetallic compound.     

Simultaneous measurement of endogenous cortisol,cortisone, dehydroepiandrosterone,and dehydroepiandrosterone sulfate in nails by use of UPLC–MS–MS

Steroid hormone concentrations are mostly determined by using different body fluids as matrices and applying immunoassay techniques. However, usability of these approaches may be restricted for several reasons, including ethical barriers to invasive sampling. Therefore, we developed an ultra-performance LC–MS–MS method for high-throughput determination of concentrations of cortisol, cortisone, dehydroepiandrosterone (DHEA), and DHEA sulfate (DHEAS) in small quantities of human nails. The method was validated for linearity, limits of detection and quantification, recovery, intra and interassay precision, accuracy, and matrix effect. Samples from 10 adult women were analyzed to provide proof-of-principle for the method’s applicability. Calibration curves were linear (r ² > 0.999) in the ranges 10–5000 pg mg⁻¹ for cortisol, cortisone, and DHEAS, and 50–5000 pg mg⁻¹ for DHEA. Limits of quantification were 10 pg mg⁻¹ for cortisol, cortisone, and DHEAS, and 50 pg mg⁻¹ for DHEA. The sensitivity and specificity of the method were good, and there was no interference with the analytes. Mean recovery of cortisol, cortisone, DHEA, and DHEAS was 90.5%, 94.1%, 84.9%, and 95.9%, respectively, with good precision (coefficient of variation <14% for all analytes) and accuracy (relative error (%) −8.3% to 12.2% for all analytes). The median (pg mg⁻¹, range) hormone concentrations were 69.5 (36–158), 65 (32–133), 212 (50–1077), and 246 (115–547) for cortisol, cortisone, DHEA, and DHEAS, respectively. This method enables measurement of cortisol, cortisone, DHEA, and DHEAS in small quantities of human nails, leading to the development of applications in endocrinology and beyond.     

Thermochemistry of Pd–In,Pd–Sn and Pd–Zn alloy systems

The standard enthalpy of formation of several Pd–M alloys (M = In, Sn and Zn) has been measured using a high temperature direct drop calorimeter. The reliability of the calorimetric results has been determined and supported by using different analytical techniques: light optical microscopy, scanning electron microscopy equipped with electron probe microanalysis (EPMA with EDS detector) and X-ray powder diffraction analysis. The values of Δ_fH (kJ/mol atoms) for the following phases were obtained for the formation in the solid state at 300 K: PdIn (49 at.%In): ?69.0 ± 1.0; Pd₂In₃ ?57.0 ± 1.0; Pd₃In₇: ?43.0 ± 1.0; PdSn₂: ?50.0 ± 1.0; Pd₂Zn₉ (77 at.%Zn): ?33.7 ± 1.0; Pd₂Zn₉ (78 at.%Zn): ?34.0 ± 1.0; Pd₂Zn₉ (80 at.%Zn): ?35.0 ± 1.0. The results show exothermic values which increase from the Pd–Zn to the Pd–Sn and Pd–In systems; the data obtained have been discussed in comparison with those available in literature.     

Cryoscopic Studies of the Uranyl Sulfate–Water, Uranyl Nitrate–Water, and Uranyl Nitrate–Nitric Acid–Water Systems

Freezing point lowerings of aqueous solutions of uranyl sulfate in the concentration range m 0.40 mol-kg^–1 and the activity and osmotic coefficients, which were calculated using the Pitzer equations for 2:2 electrolytes, are presented. Crystallization temperatures are reported for 0 to 13 molar nitric acid and 10–150 g uranium per liter uranyl nitrate–nitric acid–water solutions.