The thermodynamic properties of 4-pentenoic acid

The enthalpy of formation of liquid 4-pentenoic acid was determined by combustion calorimetry. The vapor pressure and enthalpy of vaporization of the compound were measured by the transfer method over the temperature range 289–324 K. Conformational analysis was performed. The equilibrium structure, fundamental vibrations, moments of inertia, and total energy of the stablest acid conformers were calculated by the B3LYP/6-311G(d, p) and G3MP2 quantum-chemical methods. The experimental IR spectrum and calculated vibrational frequencies were used to assign IR bands. The thermodynamic properties of monomeric 4-pentenoic acid in the ideal gas state were calculated over the temperature range 0–1500 K. Additive and quantum-chemical methods were used to estimate the Δ_f H°(g) and Δ_vap H° values. Close agreement between the calculation results and experimental data was obtained. It was shown that additive and quantum-chemical methods could be used for estimating the enthalpies of formation and vaporization of nonconjugated alkenoic acids.     

Thermodynamical properties of ε-caprolactone

The values of the combustion and enthalpies of formation for ε-caprolactone were determined by means of combustion calorimetry. The vapor pressures of lactone were measured in the range of 283–353 K, and the value of its enthalpy of vaporization was estimated by the transpiration method. Conformational analysis and calculations of the equilibrium structures, inertia moments, and sets of fundamental vibrations was performed by the B3LYP/6-311++G(3 df, 3 pd) quantum-chemical method. The total energies of the most stable lactone conformers were found and Δ_fH(g) was estimated using the composite G3MP2 method. The set of fundamental vibrations for the most stable conformers of the compound was developed on the basis of the available experimental IR spectra and calculated vibration frequencies. The values of the thermodynamic properties of ε-caprolactone were determined in the ideal ga s state in the range of 0—1500 K. A set of reliable and interconsistent thermodynamic parameters for ε-caprolactone was created. Thermodynamic analysis for liquid-phase polymerization of s-caprolactone in the temperature range of 220—500 K was carried out.     

Thermodynamic properties of glycolic acid and glycolide

The values of combustion and formation enthalpy for glycolic acid (I) and glycolide (II) were determined by calorimetry. The temperature dependence of vapor pressures of I and II was obtained using the transpiration method, and the sublimation enthalpies were obtained. The enthalpy of melting of I was found by differential scanning calorimetry. Stable conformers were determined by the ab initio (DFT) method, and combinations of the fundamental oscillations and inertia momenta of I and II conformers were calculated. The full and relative energies of the compounds most stable conformers were found by a composite G3MP2 method, and the enthalpies of formation of I and II in the gaseous state were estimated. The values of the thermodynamic properties in the ideal gas state were determined over the range of 0–1500 K. A thermodynamic analysis was performed for the process of preparation of II from I and the formation of polyglycolide (III) from I and II.     

Quantum chemical modeling of the enthalpy of formation for guanidinium bitetrazole salts

The enthalpies of formation for bitetrazole guanidinium salts in the gas and solid phases were calculated using the standard approach and isodesmic reaction method. A comparative analysis of the quality of the methods and the basis sets (HF, 3-21G, 6-31G, 6-311⁺⁺G(d, p); DFT/B3LYP, 3-21G, 6-31G(d)) was performed for the calculation of the molecular volumes necessary for modeling the enthalpies of formation in solid phase, and the optimum set was recommended. The calculated values of enthalpies of formation of the compounds obtained by the isodesmic reaction method are three times lower than the results obtained using standard procedures.     

Thermochemistry of 2-methylbenzoxazole and 2,5-dimethylbenzoxazole: an experimental and computational study

The standard (p° = 0.1 MPa) molar energies of combustion of 2-methylbenzoxazole and 2,5-dimethylbenzoxazole were measured by static-bomb combustion calorimetry. The standard molar enthalpies of vapourization, at T = 298.15 K, were obtained from high-temperature Calvet microcalorimetry. The experimental results enable the calculation of the standard molar enthalpies of formation in the gaseous state, at T = 298.15 K, for both compounds, being the results discussed in terms of structural and energetic contributions. The theoretically estimated gas-phase enthalpies of formation were calculated from high-level ab initio molecular orbital calculations at the G3(MP2)//B3LYP level of theory. The computed values compare very well with the experimental results obtained in this work and show that the 2,5-dimethylbenzoxazole is enthalpically the most stable compound. Furthermore, this composite approach was also used to obtain information about the gas-phase basicities, proton and electron affinities and adiabatic ionization enthalpies.     

The standard thermodynamic functions of ethyl-, formyl-, and benzoylferrocene in the ideal gas state

The standard enthalpies of formation of gaseous ethylferrocene, formylferrocene, and benzoylferrocene were calculated at the B3LYP/6-311+G(3df,2p)//B3LYP/6-31G(d,p) level of density functional theory using the method of isodesmic reactions. The absolute entropy, heat capacity, and enthalpy were calculated for ethylferrocene and formylferrocene by statistical thermodynamics methods over the temperature range 100–1000 K. The molecular constants necessary for calculations (structural parameters, vibrational frequencies, and internal rotation potential) were estimated at the B3LYP/6-31G(d,p) level. Empirical estimates were used to check the reliability and mutual consistency of literature experimental data on the enthalpies of formation and entropies of several ferrocene derivatives. Unreliable data were revealed and more reliable estimates of their errors were obtained.     

The thermodynamic properties of alkylated γ-lactones

The enthalpies of formation of γ-pentanolactone (I), γ-hexanolactone (II), and γ-nonanolactone (III) were determined by combustion calorimetry. The enthalpies of vaporization of these lactones were measured by the transfer method. Conformational analysis was performed and equilibrium structures, sets of fundamental vibrations, moments of inertia, and total energies of the stablest conformers of I, II, and III were calculated by the B3LYP/6-311G(d,p), G3MP2, and CBS-QB3 methods. The experimental IR spectra and calculated vibrational frequencies were used to obtain sets of fundamental vibrations of the stablest conformations. The thermodynamic properties of I–III in the ideal gas state were determined over the temperature range 0–1500 K. Additive and quantum-chemical methods were applied to estimate the Δ_f H ^o(g) values of a number of γ-lactones. Composite quantum-chemical methods were used to obtain the energies of monomethyl γ-butyrolactones and estimate their relative stability depending on the position of the methyl substituent in the ring.     

Experimental and computational study of the thermodynamic properties of 2-nitrofluorene and 2-aminofluorene

This report presents a comprehensive experimental and computational study of the thermodynamic properties of two fluorene derivatives: 2-aminofluorene and 2-nitrofluorene. The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline phase of these compounds were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. A Knudsen effusion method was used to perform the vapour pressure study of the referred compounds, yielding an accurate determination of the standard molar enthalpies and entropies of sublimation. The enthalpies of sublimation were also determined using Calvet microcalorimetry and the enthalpy and temperature of fusion were derived from DSC experiments. Derived results of standard enthalpy and Gibbs energy of formation in both gaseous and crystalline phases were compared with the ones reported in literature for fluorene. A theoretical study at the G3 and G4 levels has been carried out, and the calculated enthalpies of formation have been compared to the experimental values.     

The thermodynamic properties of delta-lactones

The enthalpies of formation of δ-hexanolactone and δ-nonanolactone were determined by combustion calorimetry. Conformational analysis and quantum-chemical calculations of equilibrium structures, fundamental vibrations, moments of inertia, and total energies were performed for δ-pentanolactone (I), δ-hexanolactone (II), and δ-nonanolactone (III) by the B3LYP/6-311G(d,p), B3LYP/6-311++G(d,p), and G3MP2 methods. The experimental IR spectra and calculated vibrational frequencies were used to suggest the assignment of vibrational frequencies of stable conformations. The thermodynamic properties of I–III in the ideal gas state were determined over the temperature range 0–1500 K. A thermodynamic analysis of mutual isomerization in the gas and liquid phases over the temperature range 298.15–900 K and liquid-phase polymerization of γ- and δ-pentanolactones and 4-pentenoic acid over the temperature range 298.15–500 K was performed.     

Thermodynamic properties of certain acetylenic peroxy derivatives of o-and m-carboranes

Temperature dependences of heat capacity of seven peroxy-containing o-and m-carborane derivatives were determined for the first time. The entropies and Gibbs energies of formation of these compounds were calculated. The enthalpies, entropies, and Gibbs energies of meta-para transitions were determined for two pairs of isomers in the condensed and gas phases.     

The thermodynamic characteristics of 15-pentadecanolide and 16-hexadecanolide

Combustion calorimetry was used to determine the enthalpies of formation of 15-pentadecanolide (I) and 16-hexadecanolide (II). The temperature dependences of vapor pressure of lactones and the enthalpies of vaporization were determined by the transpiration method. Differential scanning calorimetry measurements were performed to find the temperatures and enthalpies of fusion of lactones. Conformational analysis and quantum-chemical calculations of the structural, vibrational, and energy characteristics of stable conformers of I were performed. The molecular and spectral data were used to calculate the thermodynamic properties of I in the ideal gas state. An explanation was suggested of the special features of changes in the enthalpies of vaporization in the series of unsubstituted lactones as the size of their rings increased.     

Thermodynamic Stability of Fenclorim and Clopyralid

The present work reports an experimental thermodynamic study of two nitrogen heterocyclic organic compounds, fenclorim and clopyralid, that have been used as herbicides. The sublimation vapor pressures of fenclorim (4,6-dichloro-2-phenylpyrimidine) and of clopyralid (3,6-dichloro-2-pyridinecarboxylic acid) were measured, at different temperatures, using a Knudsen mass-loss effusion technique. The vapor pressures of both crystalline and liquid (including supercooled liquid) phases of fenclorim were also determined using a static method based on capacitance diaphragm manometers. The experimental results enabled accurate determination of the standard molar enthalpies, entropies and Gibbs energies of sublimation for both compounds and of vaporization for fenclorim, allowing a phase diagram representation of the (p,T) results, in the neighborhood of the triple point of this compound. The temperatures and molar enthalpies of fusion of the two compounds studied were determined using differential scanning calorimetry. The standard isobaric molar heat capacities of the two crystalline compounds were determined at 298.15 K, using drop calorimetry. The gas phase thermodynamic properties of the two compounds were estimated through ab initio calculations, at the G3(MP2)//B3LYP level, and their thermodynamic stability was evaluated in the gaseous and crystalline phases, considering the calculated values of the standard Gibbs energies of formation, at 298.15 K. All these data, together with other physical and chemical properties, will be useful to predict the mobility and environmental distribution of these two compounds.     

Experimental and computational thermochemical studies of 9-R-xanthene derivatives (ROH,COOH, CONH2)

In the present work, the standard (p° = 0.1 MPa) molar enthalpies of formation of xanthydrol, 9-xanthenecarboxylic acid and 9-xanthenecarboxamide, in the gaseous state, at T = 298.15 K, were determined by experimental and computational studies. The experimental techniques used were the static-bomb combustion calorimetry, which enabled the determination of the standard molar enthalpy of formation, in the crystalline state, and the vacuum drop microcalorimetric and the Knudsen effusion techniques used to derive the enthalpy of sublimation. For comparison purposes, we performed standard ab initio molecular orbital calculations, using the G3(MP2)//B3LYP composite procedure, of the enthalpies of several homodesmotic reactions, allowing to extract the standard molar enthalpies of formation, in the gaseous state, of the three xanthene derivatives considered in this work. The calculated results are in good agreement with the experimental data.     

Thermochemistry of uracil and thymine revisited

Thermochemical properties of uracil and thymine have been evaluated using additional experiments. Standard (p⁰ = 0.1 MPa) molar enthalpies of formation in the gas phase at T = 298.15 K for uracil −(298.1 ± 0.6) and for thymine −(337.6 ± 0.9) kJ · mol⁻¹ have been derived from energies of combustion measured by static bomb combustion calorimetry and molar enthalpies of sublimation determined using the transpiration method. The G3 and G4 quantum-chemical methods were used for calculations of theoretical gaseous enthalpies of formation being in very good agreement with the re-measured experimental values.     

Accurate prediction of norbornadiene cycle enthalpies by DLPNO-CCSD(T1)/CBS method

The DLPNO-CCSD(T₁)/CBS method combined with simple reactions containing small reference species leads to an improvement in the accuracy of theoretically evaluated enthalpies of formation of medium-sized polyalicyclic hydrocarbons when compared with the widely used composite approach. The efficiency of the DLPNO-CCSD(T₁)/CBS method is most vividly demonstrated by comparing with the results of G4 calculations for adamantane. The most important factor in choosing appropriate working reaction is the same number of species on both sides of the equation. Among these reactions, the reactions with small enthalpy change usually provide a better cancellation of errors. The DLPNO-CCSD(T₁)/CBS method was used to calculate the enthalpies of formation of compounds belonging to the norbornadiene cycle (norbornadiene, quadricyclane, norbornene, nortricyclane, and norbornane). The most reliable experimental enthalpies of formation are recommended for these compounds by comparing calculated values with conflicting experimental data.     

A Promising Thermodynamic Study of Hole Transport Materials to Develop Solar Cells: 1,3-Bis(N-carbazolyl)benzene and 1,4-Bis(diphenylamino)benzene

The thermochemical study of the 1,3-bis(N-carbazolyl)benzene (NCB) and 1,4-bis(diphenylamino)benzene (DAB) involved the combination of combustion calorimetric (CC) and thermogravimetric techniques. The molar heat capacities over the temperature range of (274.15 to 332.15) K, as well as the melting temperatures and enthalpies of fusion were measured for both compounds by differential scanning calorimetry (DSC). The standard molar enthalpies of formation in the crystalline phase were calculated from the values of combustion energy, which in turn were measured using a semi-micro combustion calorimeter. From the thermogravimetric analysis (TGA), the rate of mass loss as a function of the temperature was measured, which was then correlated with Langmuir’s equation to derive the vaporization enthalpies for both compounds. From the combination of experimental thermodynamic parameters, it was possible to derive the enthalpy of formation in the gaseous state of each of the title compounds. This parameter was also estimated from computational studies using the G3MP2B3 composite method. To prove the identity of the compounds, the ¹H and ¹³C spectra were determined by nuclear magnetic resonance (NMR), and the Raman spectra of the study compounds of this work were obtained.     

The thermodynamic properties of S-lactic acid

The enthalpies of combustion and formation of S-lactic acid at 298.15 K, Δ_c H _m^o(cr.) = −1337.9 ± 0.8 and Δ_f H _m^o(cr.) = −700.1 ± 0.9 kJ/mol, were determined by calorimetry. The temperature dependence of acid vapor pressure was studied by the transpiration method, and the enthalpy of its vaporization was obtained, Δ_vap H ^o(298.15 K) = 69.1 ± 1.0 kJ/mol. The temperature and enthalpy of fusion, T _m (330.4 K) and Δ_m H ^o(298.15 K) = 14.7 ± 0.2 kJ/mol, were determined by differential scanning calorimetry. The enthalpy of formation of the acid in the gas phase was obtained. Ab initio methods were used to perform a conformational analysis of the acid, calculate fundamental vibration frequencies, moments of inertia, and total and relative energies of the stablest conformers. Thermodynamic properties were calculated in the ideal gas state over the temperature range 0–1500 K. A thermodynamic analysis of mutual transformation processes (the formation of SS- and RS(meso)-lactides from S-lactic acid and the racemization of these lactides) and the formation of poly-(RS)-lactide from S-lactic acid and SS- and RS(meso)-lactides was performed.     

First principle calculations of structural,electronic and thermodynamic properties of Al3(TixV1−x) alloy in D022 and L12 structures

In this work, we employed the FP-LAPW method based on the density functional theory (DFT), and the gradient generalized approximation (GGA) has been used to compute the exchange correlation potential. We calculated the total energy for ternary alloys (Al₃Ti_xV_1−x) in the D0₂₂ and L1₂ structures in relaxed and fully relaxed phases. The total energy calculation shows that the D0₂₂ is the more stable one as it is observed experimentally. The ground states properties such as the lattice parameters, the bulk modulus and the formation enthalpies are determined. The density of states calculation shows that the pseudogap formation is located near the Fermi level. The determination of Gibbs free energy of mixing at different concentrations was used to calculate the T–x diagram which shows the stable, metastable and unstable regions of the alloys.     

Assessment of Gaussian-3X theory for chlorinated organic molecules. Enthalpies of formation of chlorobenzenes and predictions for polychlorinated aromatic compounds

The enthalpies of formation of chlorinated methanes, ethanes, ethylenes, phenols, and benzenes have been calculated at the G3X level of theory using the atomization energy procedure and the method of isodesmic reactions. By comparing the most reliable experimental data on chlorinated hydrocarbons recommended by Manion [Manion JA (2002) J Phys Chem Ref Data 31:123] with the G3X results, the accuracy of theoretical enthalpies of formation is estimated as ranging from ±4 to ±10 kJ/mol. Only for hexachloroethane, the difference between the experimental value and G3X result was outside this range and the experimental enthalpy of formation of hexachloroethane was called into question by theory. The G3X enthalpies of formation of all chlorobenzenes agree well with experimental data which were partly reanalyzed using recent experimental data on enthalpies of sublimation. Based on the G3X results, a set of self-consistent experimental data for chlorobenzenes is recommended. The enthalpies of formation of some polychlorinated dibenzo-p-dioxins were estimated using improved enthalpies of formation for chlorobenzenes. The possible inaccuracy of previously estimated values for polychlorinated aromatic compounds is discussed.     

Structures,Vibrational Spectra,and Relative Energetics of CH3COIO3 Isomers

The structures, vibrational spectra, relative energetics, and enthalpies of formation of CH₃COIO₃ isomers have been investigated with B3LYP, B3P86 and B3PW91 methods in conjugation with the 6‐31+G(d), 6‐311+G(d,p) and 6‐311++G(3df,3pd) basis sets. The CH₃COOIO₂ structure was found to be the most stable form among the isomers with an estimated enthalpy of formation of ?314.6 kJ·mol^?1. The enthalpies of formation for CH₃COOOOI, CH₃COOOIO and CH₃COIO₃ are ?180.7, ?184.9 and ?50.6 kJ·mol^?1, respectively. The implication of the formation of CH₃COIO₃ isomers from the atmospheric cross‐reactions of the acetylperoxy (CH₃COO₂) and iodine monoxide (IO) radicals was examined and the possible dissociation products of the most likely CH₃COIO₃ isomers were determined.