Au/CdS Hybrid Nanoparticles in Block Copolymer Micellar Shells

A polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) micellar structure with a P2VP core containing 5 nm CdS nanoparticles (NPs) and a PS shell formed in toluene that is a good solvent for PS block undergoes the core‐shell inversion by excess addition of methanol that is a good solvent for P2VP block. It leads to the formation of micellar shell‐embedded CdS NPs in the methanol major phase. The spontaneous crystalline growth of Au NPs on the CdS surfaces positioned at micellar shells without a further reduction process is newly demonstrated. The nanostructure of Au/CdS/PS‐b‐P2VP hybrid NPs is confirmed by transmission electron microscopy, energy‐dispersive X‐ray, and UV‐Vis absorption.

     

Strong thermal optical nonlinearity caused by CdSe nanoparticles synthesised in smectic ionic liquid crystal

Spectral and nonlinear optical properties of cadmium octanoate composites containing CdSe nanoparticles (NPs) have been studied by using optical absorption spectroscopy and laser scanning technique (Z-scan). CdSe NPs are chemically synthesised in thermotropic ionic liquid crystal (ILC) phase of cadmium octanoate which is used as nanoreactor. Anisotropic glassy nanocomposites are obtained by the rapid cooling of the ILC phase of nanocomposites to room temperature. The sizes of the CdSe NPs are determined from the absorption spectra. The thermo-optical nonlinearity of the new nanocomposites is characterised by extremely large value of the nonlinear refractive index, n₂, under relatively low-powered CW laser irradiation. This nonlinearity is caused by (1) the efficient light-induced heating due to the CdSe NPs strong exciton absorption, and (2) consequent thermal dissipation, which in turn, produces the photoelastic tensions in the glassy smectic matrix.     

Monodispersity and ordering of semiconductor quantum dots synthesised in ionic liquid crystalline phase of cadmium alkanoates

Structural and optical properties of cadmium alkanoates nanocomposites with cadmium sulfide (CdS) quantum dots (QDs) have been studied by using various techniques: small angle X-ray scattering, transmission electron microscopy, optical absorption spectroscopy and photoluminescence. QDs are chemically synthesised in thermotropic ionic liquid crystalline (ILC) phase of cadmium alkanoates that have smectic-type ordering and are used as nanoreactors. Anisotropic glassy nanocomposites are obtained by rapid cooling the thermotropic ILC nanocomposites to the room temperature. For synthesis of CdS QDs are used cadmium capronate matrix or cadmium octanoate matrix and their binary mixture. Our results show that in the new cadmium alkanoates matrices, the CdS QDs have a small dispersion of their sizes, their shape is nearly spherical, they are stable over time and they are ordered in a layered smectic A matrix. QDs in cadmium octanoate and in cadmium capronate matrices have the dominant characteristic sizes of 2.7 and 2.8 nm, respectively. In the binary mixture, the QDs have two dominant characteristic sizes of 2.7 and 3.6 nm. The glassy nanocomposites show spectra both of absorption and of photoluminescence in near-ultraviolet and blue visible spectral range.     

Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Electrochemical Designing of Au/Pt Core Shell Nanoparticles as Nanostructured Catalyst with Tunable Activity for Oxygen Reduction

Au/Pt core shell nanoparticles (NPs) have been prepared via a layer‐by‐layer growth of Pt layers on Au NPs using underpotential deposition (UPD) redox replacement technique. A single UPD Cu monolayer replacement with Pt(II) yielded a uniform Pt film on Au NPs, and the shell thickness can be tuned by controlling the number of UPD redox replacement cycles. Oxygen reduction reaction (ORR) in air‐saturated 0.1 M H₂SO₄ was used to investigate the electrocatalytic behavior of the as‐prepared core shell NPs. Cyclic voltammograms of ORR show that the peak potentials shift positively from 0.32 V to 0.48 V with the number of Pt layers increasing from one to five, suggesting the electrocatalytic activity increases with increasing the thickness of Pt shell. The increase in electrocatalytic activity may originate mostly from the large decrease of electronic influence of Au cores on surface Pt atoms. Rotating ring‐disk electrode voltammetry and rotating disk electrode voltammetry demonstrate that ORR is mainly a four‐electron reduction on the as‐prepared modified electrode with 5 Pt layers and first charge transfer is the rate‐determining step.     

Discrete Dipole Approximation Analysis of Plasmonic Core/Alloy Nanoparticles

The surface plasmon resonance (SPR) properties of Au/Au_xAg_1?x core/alloy nanoparticles (NPs) have been investigated by means of the discrete dipole approximation. The core/alloy microstructure was varied by changing the shell alloy composition x, its thickness t_S, and the shell thickness to core radius ratio (t_S/r_C) in the range of 0.05–1.0. These changes resulted in a novel tuning of SPR shape, frequency, and extinction. These models were compared with experimental results for Au/Au_xAg_1?x NPs prepared by a microwave‐mediated hydrothermal processing method, which produces core/alloy NPs with SPR signatures closely resembling those of the models.     

“Click” synthesis of thermally stable au nanoparticles with highly grafted polymer shell and control of their behavior in polymer matrix

Thermally stable core–shell gold nanoparticles (Au NPs) with highly grafted polymer shells were synthesized by combining reversible addition‐fragmentation transfer (RAFT) polymerization and click chemistry of copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). First, alkyne‐terminated poly(4‐benzylchloride‐b‐styrene) (alkyne‐PSCl‐b‐PS) was prepared from the alkyne‐terminated RAFT agent. Then, an alkyne‐PSCl‐b‐PS chain was coupled to azide‐functionalized Au NPs via the CuAAC reaction. Careful characterization using FT‐IR, UV–Vis, and TGA showed that PSCl‐b‐PS chains were successfully grafted onto the Au NP surface with high grafting density. Finally, azide groups were introduced to PSCl‐b‐PS chains on the Au NP surface to produce thermally stable Au NPs with crosslinkable polymer shell ( Au‐PSN₃‐b‐PS 1 ). As the control sample, PS‐b‐PSN₃‐coated Au NPs ( Au‐PSN₃‐b‐PS 2 ) were made by the conventional “grafting to” approach. The grafting density of polymer chains on Au‐PSN₃‐b‐PS 1 was found to be much higher than that on Au‐PSN₃‐b‐PS 2 . To demonstrate the importance of having the highly packed polymer shell on the nanoparticles, Au‐PSN₃‐b‐PS 1 particles were added into the PS and PS‐b‐poly(2‐vinylpyridine) matrix, respectively. Consequently, it was found that Au‐PSN₃‐b‐PS 1 nanoparticles were well dispersed in the PS matrix and PS‐b‐P2VP matrix without any aggregation even after annealing at 220 °C for 2 days. Our simple and powerful approach could be easily extended to design other core–shell inorganic nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of Co/MFe2O4 (M=Fe, Mn) core/shell nanocomposite particles

Monodispersed cobalt nanoparticles (NPs) with controllable size (8–14 nm) have been synthesized using thermal decomposition of dicobaltoctacarbonyl in organic solvent. The as-synthesized high magnetic moment (125 emu/g) Co NPs are dispersible in various organic solvents, and can be easily transferred into aqueous phase by surface modification using phospholipids. However, the modified hydrophilic Co NPs are not stable as they are quickly oxidized, agglomerated in buffer. Co NPs are stabilized by coating the MFe₂O₄ (M=Fe, Mn) ferrite shell. Core/shell structured bimagnetic Co/MFe₂O₄ nanocomposites are prepared with tunable shell thickness (1–5 nm). The Co/MFe₂O₄ nanocomposites retain the high magnetic moment density from the Co core, while gaining chemical and magnetic stability from the ferrite shell. Compared to Co NPs, the nanocomposites show much enhanced stability in buffer solution at elevated temperatures, making them promising for biomedical applications.     

Facile deposition of gold nanoparticles on core–shell Fe3O4@polydopamine as recyclable nanocatalyst

A simple and green method for the controllable synthesis of core–shell Fe₃O₄ polydopamine nanoparticles (Fe₃O₄@PDA NPs) with tunable shell thickness and their application as a recyclable nanocatalyst support is presented. Magnetite Fe₃O₄ NPs formed in a one-pot process by the hydrothermal approach with a diameter of ∼240 nm were coated with a polydopamine shell layer with a tunable thickness of 15–45 nm. The facile deposition of Au NPs atop Fe₃O₄@PDA NPs was achieved by utilizing PDA as both the reducing agent and the coupling agent. The satellite nanocatalysts exhibited high catalytic performance for the reduction of p-nitrophenol. Furthermore, the recovery and reuse of the catalyst was demonstrated 8 times without detectible loss in activity. The synergistic combination of unique features of PDA and magnetic nanoparticles establishes these core–shell NPs as a versatile platform for potential applications.     

Using Size-Exclusion Chromatography to Evaluate Changes in the Sizes of Au and Au/Pd Core/Shell Nanoparticles Under Thermal Treatment

In this study, we used size-exclusion chromatography (SEC) to evaluate the sizes of Au and Au/Pd core/shell nanoparticles (NPs) that had been subjected to thermal treatment, with the eluted NPs monitored through diode array detection (DAD) of the surface plasmon (SP) absorption of the NPs. In the absence of an adequate stabilizer, thermal treatment resulted in longer retention times for the Au NPs and shorter retention times for the Au/Pd core/shell NPs in the SEC chromatograms. Thus, thermal treatment influenced the sizes of these Au and Au/Pd core/shell NPs, through digestive ripening and Ostwald-type growth, respectively. In addition, the trends in the SP absorption phenomena of the NPs in the eluted samples, as measured using DAD, were consistent with the trends of their size variations, as measured from their elution profiles. In the presence of 3A-amino-3A-deoxy-(2AS,3AS)-??-cyclodextrin (H₂N-??-CD) as a stabilizer, the retention times and SP absorptions of the eluted Au and Au/Pd NP samples remained constant. Thus, H₂N-??-CD is a good stabilizer against size variation duration the thermal treatment of Au and Au/Pd core/shell NPs. A good correlation existed between the sizes obtained using SEC and those provided by transmission electron microscopy. Therefore, this SEC strategy is an effective means of further searching for suitable stabilizers for NPs, especially those exposed to harsh reaction conditions (e.g., in catalytic reactions).     

Using Size-Exclusion Chromatography to Evaluate Changes in the Sizes of Au and Au/Pd Core/Shell Nanoparticles Under Thermal Treatment

In this study, we used size-exclusion chromatography (SEC) to evaluate the sizes of Au and Au/Pd core/shell nanoparticles (NPs) that had been subjected to thermal treatment, with the eluted NPs monitored through diode array detection (DAD) of the surface plasmon (SP) absorption of the NPs. In the absence of an adequate stabilizer, thermal treatment resulted in longer retention times for the Au NPs and shorter retention times for the Au/Pd core/shell NPs in the SEC chromatograms. Thus, thermal treatment influenced the sizes of these Au and Au/Pd core/shell NPs, through digestive ripening and Ostwald-type growth, respectively. In addition, the trends in the SP absorption phenomena of the NPs in the eluted samples, as measured using DAD, were consistent with the trends of their size variations, as measured from their elution profiles. In the presence of 3A-amino-3A-deoxy-(2AS,3AS)-β-cyclodextrin (H₂N-β-CD) as a stabilizer, the retention times and SP absorptions of the eluted Au and Au/Pd NP samples remained constant. Thus, H₂N-β-CD is a good stabilizer against size variation duration the thermal treatment of Au and Au/Pd core/shell NPs. A good correlation existed between the sizes obtained using SEC and those provided by transmission electron microscopy. Therefore, this SEC strategy is an effective means of further searching for suitable stabilizers for NPs, especially those exposed to harsh reaction conditions (e.g., in catalytic reactions).

     

Constructing magnetic Fe3O4‐Au@CeO2 hybrid nanofibers for selective catalytic degradation of organic dyes

Au nanoparticles (Au NPs) play a vital role in heterogeneous catalytic reactions. However, pristine Au NPs usually suffer from poor selectivity and difficult recyclability. In this work, Fe₃O₄‐Au@CeO₂ hybrid nanofibers were prepared via a simple one‐pot redox reaction between HAuCl₄ and Ce (NO₃)₃ in the presence of Fe₃O₄ nanofibers. CeO₂ shell was uniformly coated on the surface of Fe₃O₄ nanofibers to form a unique core‐shell structure, while Au NPs were encapsulated inside the CeO₂ shell. The as‐prepared Fe₃O₄‐Au@CeO₂ hybrid nanofibers have been proved to be positively surface charged due to the formation of CeO₂ shell, enabling them to be good candidates for predominant selective catalytic activity towards the degradation of negatively charged organic dyes. In addition, the Fe₃O₄‐Au@CeO₂ hybrid nanofibers showed magnetic properties, offering them excellent recyclable usability. This work presents a facile and effective solution to prepare magnetic noble metal/metal oxide hybrid nanomaterials with unique chemical structure and surface characteristic for promising applications in heterogeneous catalysis.     

Gold/Wüstite Core–shell Nanoparticles: Suppression of Iron Oxidation through the Electron‐Transfer Phenomenon

Plasmonic Au and magnetic Fe are coupled into uniform Au@Fe core–shell nanoparticles (NPs) to confirm that electron transfer occurred from the Au core to the Fe shell. Au NPs synthesized in aqueous medium are used as seeds and coated with an Fe shell. The resulting Au@Fe NPs are characterized by using various analytical techniques. X‐ray photoelectron spectroscopy and superconducting quantum interference device measurements reveal that the Fe shell of the Au@Fe NPs mainly consists of paramagnetic Wüstite with a thin surface oxide layer consisting of maghemite or magnetite. Electron transfer from the Au core to the Fe shell effectively suppresses iron oxidation from Fe²⁺ to Fe³⁺ near the interface between the Au and the Fe. The charge‐transfer‐induced electronic modification technique enables us to control the degree of iron oxidation and the resulting magnetic properties.     

A novel enzyme-mimic nanosensor based on quantum dot-Au nanoparticle@silica mesoporous microsphere for the detection of glucose

QD-Au NP@silica mesoporous microspheres have been fabricated as a novel enzyme-mimic nanosensor. CdTe quantum dots (QDs) were loaded into the core, and Au nanoparticles (NPs) were encapsulated in the outer mesoporous shell. QDs and Au NPs were separated in the different space of the nanosensor, which prevent the potential energy or electron transfer process between QDs and Au NPs. As biomimetic catalyst, Au NPs in the mesoporous silica shell can catalytically oxidize glucose as glucose oxidase (GOx)-mimicking. The resultant hydrogen peroxide can quench the photoluminescence (PL) signal of QDs in the microsphere core. Therefore the nanosensor based on the decrease of the PL intensity of QDs was established for the glucose detection. The linear range for glucose was in the range of 5–200 μM with a detection limit (3σ) of 1.32 μM.     

全固态Z-型CdS/Au/Bi2MoO6异质结的构筑及其光催化性能

采用简单的化学还原沉积和二次水热的方法成功制备了CdS和Au共同修饰Z型CdS/Au/Bi2MoO6(CdS/Au/BMO)光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征。实验结果表明,CdS/Au/BMO-2复合材料在可见光照射下表现出最佳的降解效率,其降解RhB的速率常数约为BMO的8.8倍和CdS的20倍。Au NPs作为固态电子媒介,为光生电子的传输和转移提供了一个通道,同时Au NPs的表面等离子体共振(SPR)效应和CdS纳米粒子显著拓宽了催化体系对可见光的响应范围;通过对催化剂的组成、结构和光电性能表征,确定了CdS/Au/BMO的能带结构,进而探讨了CdS/Au/BMO活性增强机制。     

Thermotropic liquid crystal behaviour of gemini imidazolium-based ionic amphiphiles

Thermotropic ionic liquid crystals (LCs) are useful for a number of applications such as anisotropic ion transport and as organised reaction media/solvents because of their ordered fluid properties and intrinsic charge units. A large number of different ionic LC architectures are known, but only a handful of examples of gemini (i.e. paired or dimeric) ionic LCs have been prepared and studied. In this work, a series of 20 new symmetric, imidazolium-based, gemini cationic LCs containing two bridged imidazolium cations and two pendant alkyl chains was synthesised, and the thermotropic LC behaviours were characterised. The imidazolium unit provides a highly tunable and modular platform for the design and synthesis of gemini cationic LCs which offers excellent structure control. As expected, the thermotropic LC properties of these new amphilphilic, gemini ionic LCs were found to be strongly influenced by the length of the spacer between the imidazolium units, the length of the pendant alkyl tails, and the nature of the anion. Smectic A (SmA) thermotropic LC phases were observed in more than half of the gemini imidazolium LC systems studied.     

One-Step Photochemical Green Synthesis of Water-Dispersible Ag,Au, and Au@Ag Core–Shell Nanoparticles

A simple and green synthetic protocol for the rapid and effective preparation of Ag, Au and Au@Ag core–shell nanoparticles (NPs) is reported based on the light irradiation of a biocompatible, water-soluble dextran functionalized with benzophenone (BP) in the presence of AgNO₃, HAuCl₄, or both. Photoactivation of the BP moiety produces the highly reducing ketyl radicals through fast (<50 ns) intramolecular H-abstraction from the dextran scaffold, which, in turn, ensures excellent dispersibility of the obtained metal NPs in water. The antibacterial activity of the AgNPs and the photothermal action of the Au@Ag core–shell are also shown.     

Using reversed-phase liquid chromatography to monitor the sizes of Au/Pt core/shell nanoparticles

This paper describes the use of reversed-phase liquid chromatography (RPLC) to rapidly characterize Au/Pt core/shell nanoparticles (NPs) produced through seed-assisted synthesis. We monitored the sizes of Au/Pt core/shell NPs by using a porous silica-based RPLC column (pore size: ca. 100 nm) and 30 mM sodium dodecyl sulfate in deionized water as the mobile phase; the plot of the retention time with respect to the logarithm of the size of the Au NPs was linear (R² = 0.997) for diameters falling in the range from 5.3 to 40.1 nm; from five consecutive runs, the relative standard deviations of these retention times were less than 0.4%. We used the optimal separation conditions of the RPLC system to study the effects that the rate of addition of the reducing agent and the volumes of the seed, shell precursor metal ion, and reducing agent solutions had on the sizes of the Au/Pt core/shell NPs. A good correlation existed between the sizes of the Au/Pt core/shell NPs determined through RPLC and those determined using transmission electron microscopy. RPLC appears to be a useful technique for monitoring the sizes of NPs and nanomaterials in general.     

In Situ Facile Synthesis of Ru‐Based Core–Shell Nanoparticles Supported on Carbon Black and Their High Catalytic Activity in the Dehydrogenation of Amine‐Boranes

Well‐dispersed core–shell Ru@M (M=Co, Ni, Fe) nanoparticles (NPs) supported on carbon black have been synthesized via a facile in situ one‐step procedure under ambient condition. Core‐shell Ru@Co NPs were synthesized and characterized for the first time. The as‐synthesized Ru@Co and Ru@Ni NPs exhibit superior catalytic activity in the hydrolysis of ammonia borane compared with their monometallic and alloy counterparts. The Ru@Co/C NPs are the most reactive, with a turnover frequency (TOF) value of 320 (mol min^?1) mol_Ru^?1 and activation energy (E_a) of 21.16 kJ mol^?1. Ru@Ni/C NPs are the next most active, whereas Ru@Fe/C NPs are almost inactive. Additionally, the as‐synthesized NPs supported on carbon black exhibit higher catalytic activity than catalysts on other conventional supports, such as SiO₂ and γ‐Al₂O₃.     

Direct Anisotropic Growth of CdS Nanocrystals in Thermotropic Liquid Crystal Templates for Heterojunction Optoelectronics

The direct growth of CdS nanocrystals in functional solid‐state thermotropic liquid crystal (LC) small molecules and a conjugated LC polymer by in situ thermal decomposition of a single‐source cadmium xanthate precursor to fabricate LC/CdS hybrid nanocomposites is described. The influence of thermal annealing temperature of the LC/CdS precursors upon the nanomorphology, photophysics, and optoelectronic properties of the LC/CdS nanocomposites is systematically studied. Steady‐state PL and ultrafast emission dynamics studies show that the charge‐transfer rates are strongly dependent on the thermal annealing temperature. Notably, annealing at liquid‐crystal state temperature promotes a more organized nanomorphology of the LC/CdS nanocomposites with improved photophysics and optoelectronic properties. The results confirm that thermotropic LCs can be ideal candidates as organization templates for the control of organic/inorganic hybrid nanocomposites at the nanoscale level. The results also demonstrate that in situ growth of semiconducting nanocrystals in thermotropic LCs is a versatile route to hybrid organic/inorganic nanocomposites and optoelectronic devices.