Iodine‐Mediated Thioetherification of Alcohols with Disulfides or NaSH under Microwave Irradiation

An efficient and novel method for the thioetherification of an alcohol with disulfides or NaSH under microwave irradiation is presented. In the presence of iodine, a variety of alcohols were smoothly S‐alkylated with disulfides or NaSH to give the corresponding thioethers in moderate to excellent yields.     

One step synthesis of polyarylthioethers consisting of ortho-phenylthio moiety

The reactions of 5-arylthianthrenium perchlorates with sodium hydrosulfide hydrate (NaSH xH₂O) in aqueous THF at reflux afforded polyarylthioethers having five sulfur atoms bonded to only ortho positions of each aryl group in good to excellent yields.     

Synthesis of cyclic thioethers through tandem C(sp3)-S and C(sp2)-S bond formations from alpha,beta'-dichloro vinyl ketones

The synthesis of 5- to 8-memebered cyclic thioethers 4 has been achieved through a simple two-step sequence. The present methodology utilizes the facile Friedel-Crafts acylation of terminal alkynes 1 with acid chlorides 2 followed by tandem C(sp(3))-S and C(sp(2))-S bond formations with NaSH.xH(2)O.     

Synthesis and Reaction of 2-Mercapto-3-Arylpropanoic Acids

Abstract

Two synthetic pathways for the preparation of 2-mercapto-3-arylpropanoic acids were developed. First, by the reaction of arenediazonium bromides with acrylic esters in the presence of CuBr, alkyl (2-bromo-3-aryl)propanoates were formed. Their cyclization with thiourea produced 5-(R-benzyl)-2-imino-4-thiazolidinones, which yielded 3-aryl-2-mercaptopropanoic acids by alkaline hydrolysis. Second, direct Meerwein arylation of acrylates in the presence of S-nucleophile (NaSH) allowed isolation of 3-phenyl-2-mercaptopropanoic acid in 8% yield. Such acids were used for cyclization with cyanoguanidine and phenyl isothiocyanate yielding 1-[5-(R-benzyl)-4-oxo-1,3-thiazolidin-2-ylidene]guanidines and new 5-(R-benzyl)-3-phenyl-2-thioxo-1,3-thiazolidin-4-one (rhodanine) derivatives correspondingly.     

Synthesis, chemical properties and mutagenicity of 1,6- and 3,6-dinitrobenzo[a]pyrenes

Nitration of benzo[a]pyrene (BaP) with HNO3 (d = 1.38) produced a mixture of dinitroBaPs (1,6- and 3,6-isomers) and mononitroBaPs (1-, 3- and 6-isomers). Pure 1,6-dinitroBaP and 3,6-dinitroBaP were obtained by the reduction of the dinitroBaPs mixture with NaSH to yield the separable products 1-amino-6-nitroBaP and 3-amino-6-nitroBaP, followed by conversion to dinitroBaPs via the the diazonium salts. The half-wave potentials (E1/2) corresponding to the one-electron reduction of dinitroBaPs were measured and the relationship of these values to the mutagenicity is discussed.     

Synthesis of a disulfide functionalized diacetylenic derivative of carbazole as building-block of polymerizable self-assembled monolayers

A new symmetrical disulfide containing a diacetylenic unit and bearing a fluorescent carbazolyl end-group forming polymerizable self-assembled monolayers on metallic nanostructures has been synthesized. Suitable modifications of the synthetic steps involved in the synthesis of such derivatives were made in order to assure better synthetic pathway. Conversion of the tosylated derivative into the final symmetrical disulfide is carried out using sodium hydrosulfide (NaSH).     

Synthesis of novel macromonomers and telechelics of poly(2-alkyl-2-oxazoline)s

Novel macromonomers and telechelics of poly(2-alkyl-2-oxazoline) (PROZO) were syn-thesized by utilizing termination of propagating species (2-oxazolinium ions) in the living polymerization of 2-alkyl-2-oxazoline (ROZO) with suitable nucleophiles. Two types of p-vinylbenzyl–type macromonomers were obtained by terminating living PROZO with sodium p-vinylbenzyl alkoxide or with sodium p-vinylbenzyl mercaptide. The synthesis of telechelics having a functional group (SH, COOH) on both ends of PROZO was achieved by using a bis(2-oxazolinium salt) initiator. The PROZO dithiol was synthesized by two methods: (1) termination of the living species on both ends with NaSH, and (2) aminolysis of PROZO bis(O-ethyldithiocarbonate) given by treatment of the living PROZO with potassium O-ethyldithiocarbonate. Termination of the living PROZO with the sodium salt of di-t-butyl malonate yielded a PROZO with di-t-butyl malonate moieties on both polymer ends, from which the PROZO dicarboxylic acid was derived via free tetracarboxylic acid. © 1995 John Wiley & Sons, Inc.     

A synthetic route to thionolactones

The treatment of O-alkyllactonium tetrafluoroborate salts with anh. NaSH in CH₃CN at 0°C led to five-, six-, and seven-membered thionolactones (44– 90% yield).     

Synthesis and reactions of 1,10-phenanthroline-2(1H)-thione: a facile synthesis of 2,2′-thiobis-1,10-phenanthroline

Treatment of 2-chloro-1,10-phenanthroline with NaSH hydrate in DMF, Na₂S nonahydrate in DMF or thiourea in refluxing ethanol readily afforded 1,10-phenanthroline-2(1H)-thione. This thione undergoes reaction with 1,2-dibromoethane to yield a thiazole bromide salt. Upon heating the thione in diphenyl ether with 2-chloro-1,10-phenanthroline, the hydrochloride salt of 2,2′-thiobis-1,10-phenanthroline precipitated and could be converted into the corresponding free base on treatment with aqueous base. Heteroaryl substituted sulfides could be prepared by treatment of 2-chloro-1,10-phenanthroline with pyridine-2-thione or pyrimidine-1-thione with potassium carbonate in DMF.     

Synthesis of fluorescent long-chain thiols/disulfides as building-blocks for self-assembled monolayers preparation

New symmetrical disulfides together with the corresponding thiols bearing fluorescent end-groups have been synthesized as building-blocks for self-assembled monolayers (SAMs). The synthesis has been accomplished starting from aromatic nitrogen heterocycles in three steps. The conversion of the tosylated intermediate into the final disulfide is accomplished by use of sodium hydrogen sulfide (NaSH). Both products (thiols and disulfides) were isolated and characterized.      

Facile Synthesis of Ag Nanocubes of 30 to 70 nm in Edge Length with CF3COOAg as a Precursor

This paper describes a new protocol to synthesize Ag nanocubes of 30 to 70 nm in edge length with the use of CF₃COOAg as a precursor to elemental silver. By adding a trace amount of NaSH and HCl to the polyol synthesis, Ag nanocubes were obtained with good quality, high reproducibility, and on a scale up to 0.19 g per batch for the 70 nm Ag nanocubes. The Ag nanocubes were found to grow in size at a controllable pace over the course of synthesis. The linear relationship between the edge length of the Ag nanocubes and the position of localized surface plasmon resonance (LSPR) peak provides a simple method for finely tuning and controlling the size of the Ag nanocubes by monitoring the UV/Vis spectra of the reaction at different times.     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

Dithiolopyranthione Synthesis,Spectroscopy, and an Unusual Reactivity with DDQ

The bicyclic pyran thiolone tetrahydro‐3αH‐[1,3]dithiolo[4,5‐β]pyran‐2‐thione ( 3a ) engages in a highly unusual fragmentation in the presence of DDQ. The pyran thiolone, 3a , was synthesized by chlorination of 3,4‐dihydro‐2H‐pyran ( 1 ) followed by condensing with CS₂ and NaSH. Reaction of 3a with DDQ generates the isomerized pyran thiolone tetrahydro‐3αH‐[1,3]dithiolo[4,5‐β]pyran‐2‐thione ( 3b ) and 4‐benzyl‐5‐(3‐hydroxypropyl)‐1,3‐dithiole‐2‐thione ( 4 ) via a deep‐seated rearrangement. The identity of 3b was confirmed by single crystal X‐ray analysis: P2₁/c, a = 5.807(9) Å, b = 12.99(2) Å, c = 11.445(15), β = 113.23(6)°. Mechanistic experiments and computational insight is used to explain the likely sequence of events in the highly unusual formation of 4 . Collectively, these results establish fundamental reactivity patterns for further research in this area.     

Iron carbonyl sulfides, formaldehyde, and amines condense to give the proposed azadithiolate cofactor of the Fe-only hydrogenases

The azadithiolate (SCH2NHCH2S) cofactor proposed to occur in the Fe-only hydrogenases forms efficiently by the condensation of Fe2(SH)2(CO)6 (1), formaldehyde, and ammonia (as (NH4)2CO3). The resulting Fe2[(SCH2)2NH](CO)6 reacts with Et4NCN to give (Et4N)2[Fe2[(SCH2)2NH](CO)4(CN)2], for which crystallographic characterization confirmed an axial N-H and an elongated C-S bond of 1.858(3) A. Primary amines RNH2 (R = Ph, t-Bu) also participate in the condensation reaction, and Fe3S2(CO)9 can be employed in place of 1. Mechanistically, the Fe2[(SCH2)2NH] moiety is shown to arise via two pathways: (i) via the intermediacy of Fe2[(SCH2OH)2](CO)6, which was detected and shown to react with amines, and (ii) via the reaction of 1 with cyclic imines (CH2)3(NR)3 (R = Ph, Me). The reaction of 1 with (CH2)6N4 (hexamethylenetetramine) gives Fe2[(SCH2)2NH](CO)6. Trace amounts of Fe2[(SCH2)2N-t-Bu](CO)6 arise via the reaction of aqueous FeSO4, formaldehyde, NaSH, and t-BuNH2 under an atmosphere of CO.     

The influence of activated carbon on the thermal decomposition of sodium ethyl xanthate

The thermal decomposition of SEX in a nitrogen atmosphere was studied by coupled thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR), and by pyrolysis-gas chromatography-mass spectrometry (py-GC-MS). The TG curve exhibited two discrete mass losses of 45.8% and 17.8% respectively, at 200 and 257–364°C. The evolved gases identified as a result of the first mass loss were carbonyl sulfide (COS), ethanol (C₂H₅OH), ethanethiol (C₂H₅SH), carbon disulfide (CS₂), diethyl sulfide ((C₂H₅)₂S), diethyl carbonate ((C₂H₅O)₂CO), diethyl disulfide ((C₂H₅)₂S₂), and carbonothioic acid, O, S, diethyl ester ((C₂H₅S)(C₂H₅O)CO). The gases identified as a result of the second mass loss were carbonyl sulfide, ethanethiol, and carbon disulfide. Hydrogen sulfide was detected in both mass losses by py-GC-MS, but not detected by FTIR. The solid residue was sodium hydrogen sulfide (NaSH).SEX was adsorbed onto activated carbon, and heated in nitrogen. Two discrete mass losses were still observed, but in the temperature ranges 100–186°C (7.8%) and 186–279°C (11.8%). Carbonyl sulfide and carbon disulfide were now the dominant gases evolved in each of the mass losses, and the other gaseous products were relatively minor. It was demonstrated that water adsorbed on the carbon hydrolysed the xanthate to cause the first mass loss, and any unhydrolysed material decomposed to give the second mass loss.Mr. N. G. Fisher would like to thank the A. J. Parker CRC for Hydrometallurgy for the provision of a PhD scholarship.     

Hetarenes with a bridge nitrogen atom. 6. Ambident properties of the oxazolo[3,2-a]pyridinium nucleus in reactions with nucleophiles: Prediction and experiment

We have studied the problem of ambident opening of five-membered and six-membered rings of the heteroaromatic oxazolo[3,2-a]pyridinium cation. A quantum chemical SINDO1 calculation of the energies of isomeric adducts of this cation with nucleophiles predicts preferential formation of the C₉-adduct in the case of OH and SH ions with opening of the oxazole fragment, while for nitrogen-containing nucleophiles (NH₂, NMe₂) attack at the C₍₅₎ atom is also likely with opening of the pyridine fragment. We have experimentally observed that this cation undergoes opening of the five-membered ring in reaction with NaSH, opening of the six-membered ring in reaction with piperidine, and opening of both rings in reaction with ammonia.For communication 5, see [1].M. V. Lomonosov Moscow State University, Moscow 119899. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 397–402, March, 1997.     

Design and synthesis of novel perfluoroalkyl-containing zinc pyrithione biocide

Novel perfluoroalkyl-containing zinc pyrithione biocide 2 was designed and synthesized in six steps. Reaction of 4-methyl-pyridine with C₈F₁₇(CH₂)₃I in the presence of LDA followed by further oxidization of the resultant pyridine derivative 6 gave the pyridine N-oxide 9. Treatment of 9 with phosphorous oxychloride afforded the desirable chloride 12. Oxidization of compound 12 with H₂O₂ gave N-oxide 14, which was treated with NaSH to give the sulfide 3. Finally, treatment of compound 3 with NaOH/ZnSO₄ smoothly delivered perfluoroalkyl-containing zinc pyrithione biocide 2 in good yield.     

Synthesis and characterization of ran-copoly (p-phenylene sulfide sulfone/ketone)s

Random copoly(p-phenylene sulfide sulfone/ketone)s (PPSS/K) are prepared in high yield by the polycondensation of sodium hydrosulfide (NaSH) with bis(4-chlorophenyl) sulfone (BCPS) and 4,4′-dichlorobenzophenone (DCBP). The polymerization is conducted between 200–220°C, depending on the composition of the copolymer, and in the presence of water without any detrimental effects to the molecular weight. The copolymers with sulfone/ketone mole ratios (S : K) > 25 : 75 are amorphous, while the copolymers with S : K ratios ≤ 25 : 75 are crystalline. These materials form tough, creaseable films and exhibit a linear increase in the glass transition temperature with increasing sulfone content. Sulfuric acid solutions of the copolymers are dark orange to red and display an increasing λ_max in the uv-visible spectra as the S:K ratio of the copolymers decreases. © 1994 John Wiley & Sons, Inc.     

Synthesis, conformation, and complexation of novel 25,26,27,28- tetrahydroxy-5,11:17,23-bis[[2,2'-thioxydi(o-phenylene)dithioxy]- diphenylthio]calix[4]arene

Calix[4]arenes 1a,b having an electron-donating group, i.e., OH and OMe, at the lower rim reacted with thianthrene cation radical perchlorate in CH3CN at room temperature to give the corresponding thianthrenium perchlorates 3a,b in excellent yields. Treatment of 3a,b comprising a mixture of conformational isomers with NaSH.xH2O in DMF at reflux afforded the sulfur-containing cyclized compounds 4a,b, respectively. Compound 4a having a cone conformation consisted of two conformational isomers in a ratio of 0.077:1. Temperature-dependent 1H NMR study in DMF showed that conformational isomerization between the two isomers occurred with energy barriers of 14.97 and 14.10 kcal/mol at 100 and 110 degrees C, respectively. The Jobs plot of 4a against Ag+ picrate indicated that compound 4a strongly produced a 1:2 complex with Ag+ ions. Molecular mechanics calculations indicated that the conformation of the energy-minimized 4a-2Ag+ picrate complex had two crushed pyramidal geometries made up of Ag+ ion and four sulfur atoms, i.e., S1, S2, S4, S5 and S6, S7, S9, S10, respectively.     

Darstellung von metallkomplexen des thio- und selenoacetaldehyds sowie die kristallstruktur von C5H5Rh(η-CH3CHSe)P(i-Pr)3

The compounds C₅H₅Co(η²-CH₃CHS)PMe₃ (I) and C₅H₅Co(η²-CH₃CHSe)PMe₃ (II) are prepared from C₅H₅Co(CO)PMe₃, CH₃CHBr₂ and NaSH or NaSeH, respectively. The synthesis of the corresponding rhodium complexes C₅H₅Rh(η²-CH₃CHS)P(i-Pr)₃ (VI) and C₅H₅Rh(η²-CH₃CHSe)P(i-Pr)₃ (VII) has been achieved through hydrogenation of C₅H₅Rh(η²-EC=CH₂)P(i-Pr)₃ (E = S, Se), using RhCl(PPh₃)₃ as a catalyst. The crystal structure of VII has been determined.