The role of Fe–X···X–Fe contacts in the crystal structures of [(2-iodopyridinium)2FeX4]X (X = Cl, Br)

The analogy of chloride–chloride contacts in compounds containing Fe–Cl1···Cl2–Fe synthons with well-studied organic C–Cl1···Cl2–C interactions has been investigated. The crystal structures of the two tetrahaloferrate(III) salts, [(2-iodopyridinium)₂FeX₄]X (X = Cl, Br) have been determined. Analysis of these two isomorphous structures and related published structures shows that the arrangement of Fe–Cl1···Cl2–Fe synthons is similar to that of C–Cl1···Cl2–C with the Fe–Cl1···Cl2 and Cl1···Cl2–Fe angles being ~150°. While inter-chlorine distances are less than the sum of van der Waals radii in C–Cl1···Cl2–C units, they are equal to, or longer, than the sum of van der Waals radii in the corresponding Fe–Cl1···Cl2–Fe contacts. This might indicate that the arrangement of Fe–Cl1···Cl2–Fe synthons occurs predominately to reduce repulsive forces rather than as a result of attractive forces. However, it is observed that the halide–halide distance in [(2-iodopyridinium)₂FeBr₄]Br is shorter than in the isostructural chloride species, which can be explained by the fact that bromine is softer than chlorine. Several intermolecular forces unite the cations and anions within the crystalline lattice of [(2-iodopyridinium)₂FeX₄]X including N–H···X^?, C–I···X–Fe, N(π)···X–Fe, N(π)···I–C, and Fe–X1···X2–Fe contacts. The calculated electron density and electrostatic potential of the [FeX₄]^? anions and the organic iodopyridinium cations was used to describe the arrangement of these synthons and the hierarchy of the strengths of the respective contacts.     

Reactions of tBu2P–PLi–PtBu2 with [(Et3P)2MCl2] (M = Ni,Pd, Pt). Synthesis and Properties of [(1,2‐η‐tBu2P=P–PtBu2)M(PEt3)Cl] (M=Ni,Pd)

^tBu₂P–PLi–P^tBu₂·2THF reacts with [cis‐(Et₃P)₂MCl₂] (M = Ni, Pd) yielding [(1,2‐η‐^tBu₂P=P–P^tBu₂)Ni(PEt₃)Cl] and [(1,2‐η‐^tBu₂P=P–P^tBu2)Pd(PEt₃)Cl], respectively. ^tBu₂P– PLi–P^tBu₂ undergoes an oxidation process and the ^tBu₂P–P–P^tBu₂ ligand adopts in the products the structure of a side‐on bonded 1,1‐di‐tert‐butyl‐2‐(di‐tert‐butylphosphino)diphosphenium cation with a short P–P bond. Surprisingly, the reaction of ^tBu₂P–PLi–P^tBu₂·2THF with [cis‐(Et₃P)₂PtCl₂] does not yield [(1,2‐η‐^tBu₂P=P–P^tBu₂)Pt(PEt₃)Cl].     

Synthesis,crystal structure,and luminescent properties of a new modification of the zinc(II) dichloride complex with phthalazine

The coordination compound [ZnCl₂(Phtz)₂] has been synthesized by the reaction of ZnCl₂ with phthalazine (Phtz, L, C₈H₆N₂) in an ethanol solution. Its crystal structure has been determined: crystals are triclinic, space group P 0000000, a = 7.346(1) Å, b = 8.095(1) Å, c = 14.275(1) Å, α = 85.63(1)°, β = 75.75(1)°, γ = 88.43(1)°, V = 820.4(2) ų, ρ_calc = 1.605 g/cm³, Z = 2. The zinc atom is tetrahedrally coordinated to two crystallographically nonequivalent chlorine atoms and two nitrogen atoms of the ligands L (Zn(1)–N(1), 2.036(4) Å; Zn(1)–N(3), 2.043(4) Å; Zn(1)–Cl(1), 2.225(2) Å; Zn(1)–Cl(2), 2.220(2) Å; angles NZnN, 106.1(2)°; ClZnCl, 116.47(7)°). The complexes are combined into a 1D supramolecular structure by nonclassical hydrogen bonds C–H···Cl and π–π-stacking interaction between centrosymmetric pairs of aromatic rings of one of the independent ligands. The compounds [CdI₂(Phtz)] and [HgBr₂(Phtz)] have also been synthesized, and their luminescent properties have been studied.     

A Co(III) complex with a tridentate amine-imine-oxime ligand from 1,2,3,4-tetrahydroquinazoline: synthesis,crystal structure,spectroscopic and thermal characterization

A cobalt(III) complex [Co(L)₂]Cl · PPO · H₂O (1) (HL = 1-(2-aminobenzylimino)-1-phenyl-propan-2-one oxime, PPO = 1-phenyl-1,2-propanedione-2-oxime) has been synthesized and characterized by elemental analyses, spectral, thermal, magnetic and molar conductance measurements and single crystal X-ray diffraction. It crystallizes in the monoclinic crystal system, space group P2₁/c. Complex 1 consists of one uncoordinated water, one 1-phenyl-1,2-propanedione-2-oxime molecule, one bis[1-(2-aminobenzylimino)-1-phenyl-propan-2-one oxime]cobalt(III) cation and one uncoordinated chloride. The coordination geometry around Co is slightly distorted octahedral, completed with six nitrogens of two L^? ligands. The oxime moieties have E configurations. In the crystal structure, intramolecular O–H···Cl and N–H···O and intermolecular N–H···O, O–H···Cl and N–H···Cl hydrogen bonds link the molecules into chains parallel to the c axis; hydrogen-bonded PPO molecules fill the spaces between the chains and stabilization of the structure.     

5,15-bis(4′-methoxyphenyl)-3,7,13,17-tetramethyl-2,8,12,18-tetraethylporphin axial complexes of rhenium: Synthesis and reactions in protic solvents

The spectral (UV–Vis, IR, and NMR ¹H) properties and the state of oxorhenium(V) complexes with 5,15-bis(4′-methoxyphenyl)-3,7,13,17-tetramethyl-2,8,12,18-tetraethylporphin H₂P (O=Re(X)P) in protic solvents have been studied depending on the axial trans-ligand X^– (X = Cl, OPh, or OH). The O=Re(Cl)P, O=Re(OPh)P, and O=Re(OH)P in AcOH and CF3COOH are subjected to reaction of substitution their axial ligands with solvent molecules or anions, while remaining stable to the dissociation of M–N bonds and to oxidation both to the macrocyclic ligand and to the central metal cation. Quantitative parameters of the coordination of molecular oxygen by O=Re(Cl)P in 17.4–18.2 M H₂SO₄ to form O=Re(O₂)P⁺ · Cl^– have been obtained, these parameters being independent of the initial H₂SO₄ concentration. The character of peripheral functional substituents in H₂P has been shown to be responsible for the stability of the studied oxo complexes to chemical oxidation in aerated acids.     

Syntheses and Structures of Two Selenite Chloride Hydrates: Co(HSeO3)Cl · 3 H2O and Cu(HSeO3)Cl · 2 H2O

The first selenite chloride hydrates, Co(HSeO₃)Cl · 3 H₂O and Cu(HSeO₃)Cl · 2 H₂O, have been prepared from solution and characterised by single‐crystal X‐ray diffraction. The cobalt phase adopts an unusual “one‐dimensional” structure built up from vertex‐sharing pyramidal [HSeO₃]^2–, and octahedral [CoO₂(H₂O)₄]^2– and [CoO₂(H₂O)₂Cl₂]^4– units. Inter‐chain bonding is by way of hydrogen bonds or van der Waals' interactions. The atomic arrangement of the copper phase involves [HSeO₃]^2– pyramids and Jahn‐Teller distorted [CuCl₂(H₂O)₄] and [CuO₄Cl₂]^8– octahedra, sharing vertices by way of Cu–O–Se and Cu–Cl–Cu bonds. Crystal data: Co(HSeO₃)Cl · 3 H₂O, M_r = 276.40, triclinic, space group P 1 (No. 2), a = 7.1657(5) Å, b = 7.3714(5) Å, c = 7.7064(5) Å, α = 64.934(1)°, β = 68.894(1)°, γ = 71.795(1)°, V = 337.78(7) ų, Z = 2, R(F) = 0.036, wR(F) = 0.049. Cu(HSeO₃)Cl · 2 H₂O, M_r = 263.00, orthorhombic, space group Pnma (No. 62), a = 9.1488(3) Å, b = 17.8351(7) Å, c = 7.2293(3) Å, V = 1179.6(2) ų, Z = 8, R(F) = 0.021, wR(F) = 0.024.     

Halogen bonding between substituted chlorobenzene and trimethylamine: Decisive role of σ–hole and C?Cl bond breaking energy

Theoretical studies have been carried out on the halogen bonding interaction between para substituted chlorobenzene (Y C₆H₄Cl, Y = H, NH₂, CH₃, F, CN, NO₂) and N(CH₃)₃ using ab initio MP2/aug‐cc‐pVDZ and DFT based wB97XD/6‐311++G(d,p) methods. The positive electrostatic potential (V_S,max) on the Cl atom and the heterolytic bond breaking enthalpy of the C Cl bond have been calculated and their role on halogen bonding is discussed. The heterolytic bond breaking enthalpy of the C Cl bond is proposed as a measure of the strength of the σ‐hole on Cl atom. The binding strength of the complexes ranging between −6.13 kJ mol⁻¹ and −9.29 kJ mol⁻¹ are linearly related to the V_S,max of the Cl atom and the bond breaking enthalpy of the C Cl bond. In addition, energy decomposition analysis was performed on the halogen bonded complexes via symmetry adapted perturbation theory (SAPT) to predict the dominant energy component and the nature of the N···Cl interaction.     

Compounds with Cluster Cations together with Cluster Anions [(M6X12)(EtOH)6]2+ besides [(Mo6Cl8)Cl4X2]2– (M = Nb,Ta; X = Cl,Br) – Synthesis and Crystal Structures

Compounds consisting of both cluster cations and cluster anions of the composition [(M₆X₁₂)(EtOH)₆][(Mo₆Cl₈)Cl₄X₂] · n EtOH · m Et₂O (M = Nb, Ta; X = Cl, Br) have been prepared by the reaction of (M₆X₁₂)X₂ · 6 EtOH with (Mo₆Cl₈)Cl₄. IR data are given for three compounds. The structures of [(Nb₆Cl₁₂)(EtOH)₆][(Mo₆Cl₈)Cl₆] · 3 EtOH · 3 Et₂O 1 and [(Ta₆Cl₁₂)(EtOH)₆][(Mo₆Cl₈)Cl₆] · 6 EtOH 2 have been solved in the triclinic space group P1 (No. 2). Crystal data: 1 , a = 10.641(2) Å, b = 13.947(2) Å, c = 15.460(3) Å, α = 65.71(2)°, β = 73.61(2)°, γ = 85.11(2)°, V = 2005.1(8) ų and Z = 1; 2 , a = 11.218(2) Å, b = 12.723(3) Å, c = 14.134(3) Å, α = 108.06(2)°, β = 101.13(2)°, γ = 91.18(2)°, V = 1874.8(7) ų and Z = 1. Both structures are built of octahedral [(M₆Cl₁₂)(EtOH)₆]²⁺ cluster cations and [(Mo₆Cl₈)Cl₆]^2– cluster anions, forming distorted CsCl structure types. The Nb–Nb and Ta–Ta bond lengths of 2.904 Å and 2.872 Å (mean values), respectively, are rather short, indicating weak M–O bonds. All O atoms of coordinated EtOH molecules are involved in H bridges. The Mo–Mo distances of 2.603 Å and 2.609 Å (on average) are characteristic for the [(Mo₆Cl₈)Cl₆]^2– anion, but there is a clear correlation between the number of hydrogen bridges to the terminal Cl and the corresponding Mo–Cl distances.     

Layered structures constructed by second-sphere coordination via N–H ··· Cl and C–H ··· Cl hydrogen bonding: synthesis and crystal structures of tribenzylamine and [MCl6] (M = Sn,Re, and Te)

A series of second-sphere coordination complexes of tribenzylamine (L ¹ ) and [MCl₆] (M = Sn, Re, Te) have been synthesized and characterized by spectroscopic techniques (IR, NMR) and single-crystal X-ray diffraction. The main driving force for the encapsulation of [MCl₆] and recognition with L ¹ is the second-sphere coordination of metal halides by the amide protons of the ligand via hydrogen bonding (N–H ··· Cl–M and C–H ··· Cl–M); new layered structures are described. Thermal stability and irreversible behavior of second-sphere coordination complexes [L ² ] · 0.5[TeCl₆]^2? · HCl · (H₃O)⁺ · 0.5H₂O (L ² = N,N,N′,N′-tetrabenzyl-ethylenediamine) in contact with water vapor are also described.     

Self‐Assembly,Spectroscopic and Electrochemical Studies of Nickel(II)‐4,8‐Diazaundecanediamide Complex

The self‐assembly of NiCl₂·6H₂O with a diaminodiamide ligand 4,8‐diazaundecanediamide (L‐2,3,2) gave a [Ni(C₉H₂₀N₄O₂)(Cl)(H₂O)] Cl·2H₂O ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction analysis. Structural data for 1 indicate that the Ni(II) is coordinated to two tertiary N atoms, two O atoms, one water and one chloride in a distorted octahedral geometry. Crystal data for 1: orthorhombic, space group P 21nb, a = 9.5796(3) Å, b = 12.3463(4) Å, c = 14.6305(5) Å, Z = 4. Through NH···Cl–Ni (H···Cl 2.42 Å, N···Cl 3.24 Å, NH···Cl 158°) and OH···Cl–Ni contacts (H···Cl 2.36 Å, O···Cl 3.08 Å, OH···Cl 143°), each cationic moiety [Ni(C₉H₂₀N₄O₂) (Cl)(H₂O)]⁺ in 1 is linked to neighboring ones, producing a charged hydrogen‐bonded 1D chainlike structure. Thermogrametric analysis of compound 1 is consistent with the crystallographic observations. The electronic absorption spectrum of Ni(L‐2,3,2)²⁺ in aqueous solution shows four absorption bands, which are assigned to the ³A_2g → ³T_2g, ³T_2g → ¹Eg, ³T_2g → ³T_1g, and ³A_2g → ³T_1g transitions of triplet‐ground state, distorted octahedral nickel(II) complex. The cyclic volammetric measurement shows that Ni²⁺ is more easily reduced than Ni(L‐2,3,2)²⁺ in aqueous solution.     

The structure of di-μ-chloro- bis - {chloro( N,N -diethylethane-1,2-diamine-κ 2)copper(II)}

Dichloro(N,N-diethyl-ethane-1,2-diamine)copper(II) has copper(II) ions in square pyramidal coordination. The two nitrogen atoms of the diamine {Cu–N_primary?=?1.979(3), Cu–N_tertiary?=?2.108(2)?Å} and two chloride ions are in the basal plane {Cu–Cl1?=?2.2680(9), Cu–Cl2?=?2.2989(8)?Å}. A centrosymmetrical dimer di-μ-chloro-bis{chloro(N,N-diethylethane-1,2-diamine-κ²)copper(II)}, C₆H1₆Cl₂CuN₂, is formed by axial coordination by Cl2, trans to the tertiary nitrogen, to a second copper(II) ion, with Cu?···?Cuⁱ?=?3.4855(9) and Cl2–Cuⁱ?=?2.7860(8)?Å. The dimer is also linked by H-bond N1–H?···?Cl1ⁱ.     

Zur Bedeutung von V2O3(OH)4(g) für den chemischen Transport von V2O5(s) in Anwesenheit von Wasser. Nachweis des Gasteilchens,thermodynamische Daten und Modellrechnungen

V₂O₃(OH)₄(g), Proof of Existence, Thermochemical Characterization, and Chemical Vapor Transport Calculations for V₂O₅(s) in the Presence of Water By use of the Knudsen-cell mass spectrometry the existence of V₂O₃(OH)₄(g) is shown. For the molecules V₂O₃(OH)₄(g), V₄O₁₀(g), and V₄O₈(g) thermodynamic properties were calculated by known Literatur data. The influence of V₂O₃(OH)₄(g) for chemical vapor transport reactions of V₂O₅(s) with water ist discussed. Δ_BH°(V₂O₃(OH)₄(g), 298) = –1920 kJ · mol^–1 and S°(V₂O₃(OH)₄(g), 298) = 557 J · K^–1 · mol^–1, Δ_BH°(V₄O₁₀(g), 298) = –2865,6 kJ · mol^–1 and S°(V₄O₁₀(g), 298) = 323.7 J · K^–1 · mol^–1, Δ_BH°(V₄O₈(g), 298) = –2465 kJ · mol^–1 and S°(V₄O₈(g), 298) = 360 J · K^–1 · mol^–1.     

Copper(I) π‐Complexes with 2‐Butyne‐1,4‐diol. Synthesis and Crystal Structure of Na[CuCl2(HOCH2C≡CCH2OH)]·2H2O

Crystals of anionic Na[CuCl₂(HOCH₂C≡CCH₂OH)]·2H₂O π‐complex have been synthesized by interaction of 2‐butyne‐1,4‐diol with CuCl in a concentrated aqueous NaCl solution and characterized by X‐ray diffraction at 100 K. The crystals are triclinic: space group , a = 7.142(3), b = 7.703(3), c = 10.425(4) Å, α = 105.60(3), β = 99.49(3), γ = 110.43(3)°, V = 495.9(4) ų, Z = 2, R = 0.0203 for 3496 reflections. The structure is built of discrete [CuCl₂(HOCH₂C≡CCH₂OH)]^? anionic stacks and polymeric cations among the stacks. The Cu^I atom adopts trigonal planar coordination of two Cl^? anions and the C≡C bond of 2‐butyne‐1,4‐diol, Cu–(C≡C) distance is equal to 1.903(3) Å. Na⁺ cations environment is octahedral and consists of O and Cl atoms. The crystal packing is governed by strong hydrogen bonds of O–H···Cl and O–H···O types.     

Synthesis,Structure and Property of a Dawson-type Arsenomolybdate with an Appended AsIII Cap

An inorganic–organic hybrid compound, (H₂bpy)₃[As^IIIAs₂ ^VMo₁₅ ^VIMo₃ ^VO₆₂]·3H₂O (bpy: 4,4′-bipyridine) (1) has been synthesized under hydrothermal conditions and characterized by elemental analysis, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction, IR spectrum, UV–Vis spectrum, thermogravimetric analysis and single-crystal X-ray diffraction. The crystallographic analysis reveals that compound 1 is composed of a Wells–Dawson polyoxoanion [As₂ ^VMo₁₅ ^VIMo₃ ^VO₆₂]^9? with the mixed valence of Mo^V,VI, which acts as a tetradentate ligand coordinating with the As^III cation to form the mixed valence As^III,V containing arsenomolybdate with the single cap structure in a chelate coordination mode. In the solid state, compound 1 shows a 3D supramolecular structure through hydrogen-bonding interactions (C–H···O, N–H···O, N–H···N). In addition, compound 1 exhibits reversible multi-electron redox processes and effective electrocatalytic activities towards the reduction of H₂O₂, NaNO₂ and KBrO₃. Moreover, compound 1 is used as a reducing agent of the graphene oxide to prepare graphene by a green chemistry type one-step synthesis method, which is characterized by XPS, Raman spectroscopy, PXRD, IR, scanning electron microscopy and transmission electron microscopy.     

On the defect structure of calcium titanate with nonideal cationic ratio

The defect structure of polycrystalline calcium titanate with Ca/Ti = 0.998, 0.995, and 0.992 was investigated by measuring the equilibrium electrical conductivity as a function of oxygen partial pressure (P_O2 = 10⁰–10^?20 atm) at 950–1050°C. These data were similar to that obtained in the sample with ideal cationic ratio. The deviation from ideal Ca-to-Ti ratio is found to be accommodated by the formation of neutral vacancy pairs, (V″_CaV^··₀). The results indicate that the single-phase field of calcium titanate extends beyond 50.201 mole% TiO₂.     

New Hybrid Material: (C<Subscript>3</Subscript>H<Subscript>6</Subscript>N<Subscript>3</Subscript>)<Subscript>4</Subscript>Bi<Subscript>2</Subscript>Cl<Subscript>10</Subscript>. Synthesis,Structural Study and Spectroscopic Behavior

The structure of (C₃H₆N₃)₄Bi₂Cl₁₀ was determined by single crystal X-ray diffraction at room temperature. It crystallizes in the orthorhombic space group Pcmn, with a = 9.430 (1) Å, b = 17.426 (3) Å, c = 19.883(5) Å, V = 3267.3 (11) ų and Z = 4. The structure consists of discrete binuclear [Bi₂Cl₁₀]^4– anions and 3-aminopyrazolium cations. The crystal packing is governed by weak N–H···Cl hydrogen bonds, π–π and electrostatic Cl···Cl interactions. Infrared spectrum is used to gain more information on the title compound. An assignment of the observed vibration modes is reported. The crystal morphology is studied using the BFDH laws. The calculated HOMO and LUMO energies show that charge transfer occur within organic and inorganic molecules. The optical absorption of the zero-dimensional hybrid was also investigated.     

Inclusion of Cl− or Br− anions within host framework formed by second-sphere interactions

In this study, we have deliberately utilized the second-sphere coordination approach into the construction of supramolecular inclusion solids Cl ? [H₂ L1]·[InCl₄] (Crystal I) and Br ? [H₂ L1]·[TeBr₆] (Crystal II). The chloride or bromine anions can be encapsulated inside the host assemblies formed by the diamine molecule (4,6-dimethyl-1,3-phenylene) bis(N,N-dibenzylmethane) (L1) and the metal complexes ([InCl₄]^? and [TeBr₆]^2?) via second-sphere interactions. The inclusion complexes have been structurally characterized by X-ray crystallography, indicating that weak C–H···Cl and C–H···Br hydrogen bonding synthons play a significant role in the construction of host framework. 2-D networks are formed in both complexes by the interconnection of 1-D networks through the multiple weak hydrogen bonding interactions with [InCl₄]^? or [TeBr₆]^2?. The guest Cl^? or Br^? anions are encapsulated inside the host cages through N–H···Cl hydrogen bonds. The inclusion selectively was studied for the two host assemblies.     

Gasphasengleichgewichte quaternärer Bismut‐Selen‐Oxidchloride

Gas‐Phase Equilibria of Quaternary Bismuth Selenium Oxidechlorides The existence of new compounds Bi₄O₄SeCl₂, Bi₁₀O₁₂SeCl₄, and Bi₂₂O₂₈SeCl₈ in the pseudoternary area Bi₂O₃/Bi₂Se₃/BiCl₃ has been established by solid state and chemical vapour transport reactions. Furthermore, heterogeneous equilibria between solid state and vapour phase have been studied by mass‐spectrometric measurements. The novel gas‐molecule BiSeCl has been detected. The results of ab initio calculations for structure and refining of thermochemistry of this molecule are given: (Bi–Se) = 2,44 Å; (Bi–Cl) = 2,49 Å; (Se–Bi–Cl) = 106,0°; Thermodynamics: δH°_B,298 (BiSeCl_g) = 6,0 kcal/mol; S°₂₉₈ (BiSeCl_g) = 75,8 cal/mol K; Cp (BiSeCl_g) = 13,583 + 0,64 · 10^–3 · T – 0,41 · 10⁵ · T^–2 – 0,35 · 10^–6 · T² cal/mol K. Finally, the composition of the gaseous phase has been calculated and estimations about chemical vapour transport were carried out by thermodynamic modelling.     

Synthesis and characterization of chloro-bis(quinoline-2-carboxylato-κ2N,O)gallium(III)

The preparation and characterization of a new gallium(III) complex with quinoline-2-carboxylate, of formula [Ga(quin-2-c)₂Cl], are described. The crystal structure of the complex has been determined by X-ray diffraction, crystallizing in monoclinic space group P2₁/n with Ga(III) adopting a distorted tetragonal pyramid. Gallium(III) coordinates two quinoline-2-carboxylates and one chloride with a Cl,N₂,O₂ donor set. In the crystal the 2-D supramolecular structure is generated by weak intermolecular interactions, C–H?···?O, C–H?···?Cl, and C–H?···?π. The cytotoxicity assays against several human cancer cell lines (Du145, A549, MCF-7, A498, HT-29) and against mouse fibroblasts (BALB/3T3) revealed moderate antiproliferative activity of the complex.     

31P CP-MAS NMR,Vibrational, and X-Ray Characterization of the Adducts of Triphenylphosphine Sulfide with ICl and IBr

The reactions between triphenylphosphine sulfide (Ph₃PS) and ICl in CCl₄ and IBr in CH₂Cl₂ in 1 : 1 molar ratio give the solid adducts Ph₃PS · ICl ( I ) and Ph₃PS · IBr ( II ) whose structures have been solved by X-ray diffraction. Compounds I and II consist of discrete molecule units and feature the S–I–Cl or S–I–Br linear group. The S–I bond distances in I , II (2.641(1), 2.665(1) Å respectively) and in compound 2 Ph₃PS · 3 I₂ ( III ) (2.729(2) Å) are correlable to the net increase in the I–X (X = Cl, Br, I) bond distance. The structural features of I , II and III are in accordance with ³¹P CP–MAS NMR, FT-Raman and FT-IR spectral data, and elucidate the nature of the donor (Ph₃PS)-acceptor (ICl, IBr, I₂) interaction.