New metal-organic polygons involving MM quadruple bonds: M8(O2CtBu)4(mu-SC4H2-3,4-{CO2}2)6 (M=Mo, W)

The reactions between M2(O2CtBu)4, where M=Mo or W, and thienyl-3,4-dicarboxylic acid (0.5-1.5 equiv) in toluene proceed via a series of detectable intermediates to the compounds M8(O2CtBu)4(mu-SC4H2-3,4-{CO2}2)6, which are isolated as air-sensitive yellow (M=Mo) or red (M=W) powders and show parent molecular ions in their mass spectra (MALDI). The structure of the molybdenum complex was determined by single-crystal X-ray crystallography and shown to contain an unusual M8 polygon involving four Mo2 quadruply bonded units linked via the agency of the six 3,4-thienylcarboxylate groups. The structure has crystallographically imposed S4 symmetry and may be described in terms of a highly distorted tetrahedron of Mo2 units or a bisphenoid in which two Mo2 units are linked by a thienyldicarboxylate such that intramolecular Mo2...O bonding is present, while the other thienylcarboxylate bridges merely serve to link these two [Mo2]...[Mo2] units together. The color of the compounds arises from intense M2 delta-to-thienyl pi transitions and, in THF, the complexes are redox-active and show four successive quasi-reversible oxidation waves. The [M8]+ radical cations, generated by one-electron oxidation with AgPF6, are shown to be valence-trapped (class II) by UV-vis-near-IR and electron paramagnetic resonance spectroscopy. These results are supported by the electronic structure calculations on model compounds M8(O2CH)4(mu-SC4H2-3,4-{CO}2)6 employing density functional theory that reveal only a small splitting of the M2 delta manifold via mixing with the 3,4-thienylcarboxylate pi system.     

Hydrothermal Synthesis and Crystal Structure of a Novel Polymolybdic（VI） Acid： {[H3O]2^＋[Mo2O4（OH）6^]2-}n

1 INTRODUCTION Coordination polymers[1～3] with one-, two- or three-dimensional structure and supramolecular compounds[4, 5] formed by weak interactions, such as hydrogen bonds, Van Der Waals’ forces, short-range exclusion forces, etc., have a variety of possible applications ranging from semicon- ductor to catalysts and potentially valuable pro- perties reminiscent of zeolites. So, considerable increasing attention has been focused on the syn- thesis or building of these coordination po…     

{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20]36-: a molecular quantum spin icosidodecahedron

Self-assembly of aqueous solutions of molybdate and vanadate under reducing, mildly acidic conditions results in a polyoxomolybdate-based {Mo72V30} cluster compound Na8K16(VO)(H2O)5[K10 subset{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20].150H2O, 1, a quantum spin-based Keplerate structure.     

Mixed-metal sandwich complexes [M(II)2(H2O)2Fe(III)2(P2W15O56)2]14- (M(II) = Co, Mn): synthesis and stability. The molecular structure of [M(II)2(H2O)2Fe(III)2(P2W15O56)2]14-

Two new mixed-metal sandwich complexes [M(II)2(H2O)2Fe(III)2(P2W15O56)2]14- (abbreviated [M2Fe2P4W30], M(II) = Co(II), Mn(II)) were obtained at pH 3 by addition of M2+ to [Na2(H2O)2Fe(III)2(P2W15O56)2]16- (abbreviated [Na2Fe2P4W30]) without substitution in the alpha-[P2W15O56]12- (abbreviated [P2W15]) units. Their X-ray structures are reported. At lower pH, back conversion to [Na2Fe2P4W30] was followed by 31P NMR, electrochemistry and UV-visible spectroscopy. The preparation and the characterization in solution of the lacunary intermediate [NaCo(II)(H2O)2Fe(III)2(P2W15O56)2]15- (abbreviated [NaCoFe2P4W30]) is also described.     

Gas phase oxidation of alkoxo ligands in bis(peroxo)[MO(O2)2(OR)]- and trisoxo [MO3(OR)]- anions (M = Cr, Mo, W)

The anions [M(VI)O(O(2))(2)(OR)](-) and [M(VI)O(3)(OR)](-)(M = Cr, Mo, W; R = H, Me, Et, (n)Pr, (i)Pr) were transferred to the gas phase by the electrospray process. Their decomposition was examined by multistage mass spectrometry and collisional activation experiments. The molybdate and tungstate anions [M(VI)O(O(2))(2)(OR)](-) underwent parallel elimination of aldehyde (ketone) and dioxygen while the equivalent chromate underwent loss of dioxygen only. The peroxo ligands were the source of oxidising equivalents in both reactions. For each alkoxo ligand, the total yield of aldehyde for the tungstate system exceeded that for the molybdate system. Collisional activation of [M(VI)O(3)(OMe)](-) led to clean elimination of formaldehyde with the metal centre supplying the oxidising equivalents. For larger alkoxo ligands, only the chromate centre eliminated aldehyde, while the molybdate and tungstate centres underwent clean loss of alkene. Threshold activation voltages indicated that the peroxo ligands of [W(VI)O(O(2))(2)(OMe)](-) are more oxidising than the tungstate centre of [W(VI)O(3)(OMe)](-). (2)H and (18)O isotope tracing experiments were consistent with a formal hydride transfer mechanism operating for oxidation of alkoxo ligand in each system. In the solid state, anions [M(VI)O(O(2))(2)(OR)](-) are typically pentagonal pyramidal (oxo in apical site) while [M(VI)O(3)(OR)](-) are tetrahedral. The data indicate that an equatorial ligand position is the site of alkoxo oxidation in [M(VI)O(O(2))(2)(OR)](-) anions. Comparisons of the gas phase data with those for a solution phase system are made.     

An unusual asymmetric polyoxomolybdate containing mixed-valence antimony and its derivatives: [Sb4VSb2IIIMo18O73(H2O)2]12- and {M(H2O)2[Sb4VSb2IIIMo18O73(H2O)2]2}22- (M = MnII, FeII, CuII or CoII)

A new type of heteropolyanion containing mixed-valence antimony, [Sb4(V)Sb2(III)Mo18O73(H2O)2](12-) (1a), and its four derivatives, {M(H2O)2[Sb4(V)Sb2(III)Mo18O73(H2O)2]2}(22-) (M = Mn(II), Fe(II), Cu(II), or Co(II)) (2a-5a), have been isolated as ammonium salt, and their structures were determined by single-crystal X-ray diffraction. The framework of the polyanion 1a displays a curious asymmetric structure, and there exist six types of Sb coordination environments and seven types of {MoO6} octahedra. The title compounds were also characterized by elemental analyses, IR, UV-vis, Raman spectra, and cyclic voltammogramms.     

Complexation of molybdenum(V) with glycolic acid: an unusual orientation of glycolato ligand in {Mo2O4}2+ complexes

(PyH)5[Mo(V)OCl4(H2O)]3Cl2 and (PyH)n[Mo(V)OBr4]n reacted with glycolic acid (H2glyc) or its half-neutralized ion (Hglyc(-)) to afford a series of novel glycolato complexes based on the {Mo(V)2O4}2+ structural core: (PyH)3[Mo2O4Cl4(Hglyc)]. (1)/ 2CH 3CN (1), (PyH) 3[Mo 2O 4Br 4(Hglyc)].Pr(i)OH(2), (PyH)2[Mo2O4(glyc) 2Py 2] (3), (PyH) 4[Mo 4O 8Cl 4(glyc) 2].2EtOH (4), and [Mo 4O 8(glyc) 2Py 4] (5) (Py = pyridine, C 5H 5N; PyH(+) = pyridinium cation, C 5H 5NH (+) and glyc (2-) = a doubly ionized glycolate, (-)OCH 2COO (-)). The compounds were fully characterized by X-ray crystallography and infrared spectroscopy. The Hglyc (-) ion binds to the {Mo 2O 4} (2+) core through a carboxylate end in a bidentate bridging manner, whereas the glyc (2-) ion adopts a chelating bidentate coordination through a deprotonated hydroxyl group and a monodentate carboxylate. The orientations of glyc (2-) ions in 3- 5 are such that the alkoxyl oxygen atoms occupy the sites opposite the multiply bonded oxides. {(C6H5) 4P}[Mo(VI)O 2(glyc)(Hglyc)] ( 6), an oxidized complex, features a reversed orientation of the glyc(2-) ion. The theoretical DFT calculations on the [Mo(V)2O4(glyc) 2Py 2](2-) and [Mo(VI)O2(glyc)2](2-) ions confirm that binding of glycolate with the alkoxyl oxygen to the site opposite the MoO bond is energetically more favorable in {Mo(V)2O4}(2+) species, whereas a reversed orientation of the ligand is preferred in Mo(VI) complexes. An explanation based on the orbital analysis is put forward.     

On the electronic structure of giant polyoxometalates: Mo(132)vs. W(72)Mo(60)

The molecular and electronic structure of the spherical Keplerates [{(Mo(VI))Mo(VI)(5)O(21)}(12)(Mo(V)(2)O(4))(30)](12-) (Mo(132)) and [{(W(VI))W(VI)(5)O(21)}(12)(Mo(V)(2)O(4))(30)](12-) (W(72)Mo(60)) has been determined, for the first time, using first-principles density functional theory (DFT) based methods including solvent effects. Computed geometric parameters are in very good agreement with X-ray data, whereas the electronic structure reveals the archetypal nature of polyoxometalates.     

Photoreductive self-assembly from [Mo7O24]6- to carboxylates-coordinated {Mo142} Mo-blue nanoring in the presence of carboxylic acids

The primary steps of the photoredox reaction between [Mo7O24]6- and carboxylic acid electron (and proton) donors in aqueous solutions are investigated by the chemically induced dynamic electron spin polarization (CIDEP) spectroscopy. The excitation of the O-->Mo ligand-to-metal charge-transfer (LMCT) bands of [Mo7O24]6- in the presence of CH3CO2H induces the emissive electron spin polarization (ESP) of *CH2CO2 and *CH3 radicals with an accompanying formation of the one-electron reduced species [Mo7O23(OH)]6-, which is demonstrated by the triplet mechanism involving the O --> Mo LMCT triplet states. The prolonged photolysis of the solution containing [Mo7O24]6- and CH3CO2H at pH = 3.4 leads to the formation of the acetate/propionate-coordinated {Mo142} Mo-blue nanoring, [MoV28MoV(I)114O429H10(H2O)(49)(CH3)CO2 triple bond Ac5(C2H5CO2 triple bond Pr)]30- (1a) through the formation of the cis-configured dimeric dehydrative condensation to two-electron reduced Mo-blue [(Mo7O23)2]10- ({Mo14}). 1a is isolated as a [NH4]+/[Me3NH]+-mixed salt which is formulated as [NH4]27[Me3NH]3[Mo(V)28Mo(VI)114O429H10(H2O)49(CH3CO2)5(C2H5CO2)].150 +/- 10H2O (1) by results of elementary analysis, single-crystal X-ray analysis, 1H NMR, IR, and UV/Vis measurements, and manganometric redox titration. Based on the building-block sequence of for 1a, the bottom-up processes from [Mo7O24]6- to the {Mo142} ring in the coexistence of beta-[Mo8O26]4- are discussed by (i) the stabilization of the molecular curvature of {Mo14} through both the intramolecular transfer of monomolybdates and the intermolecular transfer of monomolybdates as degradation fragments of beta-[Mo8O26]4-, to yield {Mo21} and {Mo20} building blocks, (ii) the outer-ring formation resulting from seven successive two-electron-photoreductive condensations among {Mo21} and {Mo20}, and (iii) inner-ring formation resulting from eight successive dehydrative condensations between monomolybdate linkers attached to the neighboring head Mo sites.     

Magnetic anisotropy of [Mo(CN)7]4- anions and fragments of cyano-bridged magnetic networks

Quantum chemistry calculations of CASSCF/CASPT2 level together with ligand field analysis are used for the investigation of magnetic anisotropy of [Mo(CN)7]4- complexes. We have considered three types of heptacyano environments: two ideal geometries, a pentagonal bipyramid and a capped trigonal prism, and the heptacyanomolybdate fragment of the cyano-bridged magnetic network K2[Mn(H2O)2]3[Mo(CN)7]2.6H2O. At all geometries the first excited Kramers doublet is found remarkably close to the ground one due to a small orbital energy gap in the ligand field spectrum, which ranges between a maximal value in the capped trigonal prism (800 cm(-1)) and zero in the pentagonal bipyramid. The small value of this gap explains (i) the axial form of the g tensor and (ii) the strong magnetic anisotropy even in strongly distorted complexes. Comparison with available experimental data for the g tensor of the mononuclear precursors reveals good agreement with the present calculations for the capped trigonal prismatic complex and a significant discrepancy for the pentagonal bipyramidal one. The calculations for the heptacyanomolybdate fragment of K2[Mn(H2O)2]3[Mo(CN)7]2.6H2O give g(perpendicular)/g(parallel) approximately 0.5 and the orientation of the local anisotropy axis close to the symmetry axis of an idealized pentagonal bipyramid. These findings are expected to be important for the understanding of the magnetism of anisotropic Mo(III)-Mn(II) cyano-bridged networks based on the [Mo(CN)7]4- building block.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

New iron(III) nitrate hydrates: Fe(NO3)3·xH2O with x = 4, 5 and 6

Crystals of the title compounds were grown from their hydrous melts or solutions. The crystal structure of iron(III) trinitrate hexahydrate {hexaaquairon(III) trinitrate, [Fe(H₂O)₆](NO₃)₃} is built up from [Fe(H₂O)₆]²⁺ octahedra and nitrate anions connected via hydrogen bonds. In iron(III) trinitrate pentahydrate {pentaaquanitratoiron(III) dinitrate, [Fe(NO₃)(H₂O)₅](NO₃)₂}, one water molecule in the coordination octahedron of the Fe^III atom is substituted by an O atom of a nitrate group. Iron(III) trinitrate tetrahydrate {triaquadinitratoiron(III) nitrate monohydrate, [Fe(NO₃)₂(H₂O)₃]NO₃·H₂O} represents the first example of a simple iron(III) nitrate with pentagonal–bipyramidal coordination geometry, where two bidentate nitrate anions and one water molecule form a pentagonal plane.     

An approach to the synthesis of polyoxometalate encapsulating different kinds of oxoanions as heteroions: bisphosphitopyrophosphatotriacontamolybdate [(HPO3)2(P2O7)Mo30O90]8-

A yellow [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was prepared as a tetrapropylammonium (Pr(4)N(+)) salt from a 50 mM Mo(VI)-2 mM P(2)O(7)(4-)-4 mM HPO(3)(2-)-0.95 M HCl-60% (v/v) CH(3)CN system at ambient temperature. The (Pr(4)N)(8)[(HPO(3))(2)(P(2)O(7))Mo(30)O(90)] salt crystallized in the orthorhombic space group P(nma) (No. 62), with a = 30.827(2) A, b = 22.8060(15) A, c = 30.928(2) A, V = 21743(3) A(3), and Z = 4. The structure contained a (P(2)O(7))Mo(12)O(42) fragment derived from the removal of each corner-shared Mo(3)O(13) unit in a polar position from a [(P(2)O(7))Mo(18)O(54)](4-) structure, and each side of the (P(2)O(7))Mo(12)O(42) fragment was capped by a B-type (HPO(3))Mo(9)O(24) unit. The [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was characterized by voltammetry and IR, UV-vis, and (31)P NMR spectroscopy. Unlike the Keggin and Dawson anions and the parent [(P(2)O(7))Mo(18)O(54)](4-) anion, the [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion exhibited two-electron redox waves in CH(3)CN with and without acid.     

Nanoscale assemblies of gigantic molecular {Mo154}-rings: (dimethyldioctadecylammonium)20[Mo154O462H8(H2O)70

Clusters based on the mixed-valence gigantic inorganic ring [Mo154O462H14(H2O)70]14- ({Mo154}-ring) and dimethyldioctadecylammonium (DODA) were combined to form novel molecular assemblies of an inorganic-organic hybrid molecular system as Langmuir-Blodgett (LB) and cast films. (DODA)20[Mo154O462H8(H2O)70] (2) was prepared by cation exchange and was characterized by a combination of thermogravimetry, IR, UV-vis-NIR, 1H NMR, and XRD measurements. The salt 2 was soluble in common organic solvents, and the chemical stability of {Mo154}-ring encapsulated by DODA cationic surfactants in CHCl3 was found to be higher than that of the "native" sodium salt of the {Mo154}-ring in H2O. Uniform spherical vesicle-like molecular assemblies of (DODA)20[Mo154O462H8(H2O)70] were observed in dilute THF, whose average diameter of 95 nm and a normalized variance of 5.7% were confirmed by a X-ray small-angle scattering. Deposition of 2 as a cast film showed circular domains with a typical diameter of approximately 100 nm, indicating possible similarities between solution and surface-deposited structures. The resulting LB films of salt 2 were transferred from an acidic buffer subphase with pH = 1.5 onto mica, giving a two-dimensional film surface with a unity transfer ratio. Further, the electronic absorption spectra of the LB multilayer were consistent with the classic type II mixed-valence MoV/MoVI electronic state well know for molybdenum blue {Mo154}-ring systems, and it appears that on the surface the plane of the {Mo154}-ring is approximately parallel to the substrate surface, as indicated by polarized electronic spectra, while the alkyl chains of DODA were relatively normal to the substrate surface. Therefore, the layer between the {Mo154}-rings and DODA cations was alternately stacked along the direction of film propagation. Finally, it was found that the surface morphology of the cast and LB films was determined by the molecular assembly of (DODA)20[Mo154O462H8(H2O)70] in solution and the air-water interface, respectively.     

Multi-iron tungstodiarsenates. Synthesis,characterization, and electrocatalytic studies of alphabetabetaalpha-(Fe(III)OH(2))(2)Fe(III)(2)(As(2)W(15)O(56))(2)(12)(-)

Reaction of the trivacant lacunary complex, alpha-Na(12)[As(2)W(15)O(56)], with an aqueous solution of Fe(NO(3))(3).9H(2)O yields the sandwich-type polyoxometalate, alphabetabetaalpha-Na(12)(Fe(III)OH(2))(2)Fe(III)(2)(As(2)W(15)O(56))(2) (Na1). The structure of this complex, determined by single-crystal X-ray crystallography (a = 13.434(1) A, b = 13.763(1) A, c = 22.999(2) A, alpha = 90.246(2) degrees, beta = 102.887(2) degrees, gamma = 116.972(1) degrees, triclinic, Ponemacr;, R1 = 5.5%, based on 25342 independent reflections), consists of an Fe(III)(4) unit sandwiched between two trivacant alpha-As(2)W(15)O(56)(12)(-) moieties. UV-vis, infrared, cyclic voltammetry, and elemental analysis data are all consistent with the structure determined from X-ray analysis. Magnetization studies confirm that the four Fe(III) centers are antiferromagnetically coupled. A cyclic voltammogram of Na1 reveals that a three-wave W(VI) system replaces the two-wave W(VI) system found in the precursor alpha-As(2)W(15)O(56)(12)(-) complex. The observed modifications in the CV patterns of Na1 and alpha-As(2)W(15)O(56)(12)(-) are most likely due to subsequent changes in the acid-base properties of two reduced POMs that occur as a result of Fe(III) incorporation. Na1 is shown to be more efficient than the monosubstituted complex alpha(2)-As(2)(Fe(III)OH(2))W(17)O(61)(7)(-) in the electrocatalytic reduction of dioxygen. This is attributed to cooperativity effects among the adjacent Fe(III) centers in Na1.     

Ni(3)(Mo(2)O(8))(XO(3)) (X = Se, Te): the first nickel selenite- and tellurite-containing Mo4 clusters

Two new nickel(II) molybdenum(VI) selenium(IV) and tellurium(IV) oxides generally formulated as Ni3(Mo2O8)(XO3) (X = Se, Te) have been synthesized by solid-state reactions of NiO, MoO3, and SeO2 (or TeO2). Both compounds feature 3D network structures built of [Mo4O16]8- tetranuclear cluster units and 2D nickel(II) selenite or tellurite layers. The nickel(II) selenite layer in Ni3(Mo2O8)(SeO3) is formed by [Ni6O22]32- hexanuclear clusters interconnected by selenite groups whereas the thick nickel(II) tellurite layer in Ni3(Mo2O8)(TeO3) is constructed by corrugated nickel(II) oxide chains bridged by the tellurite groups. The results of magnetic property measurements indicate that there are considerable ferromagnetic interactions between nickel(II) centers in both compounds. Their optical properties and band structures have been also studied.     

A new sensitive method for the spectrophotometric determination of molybdenum using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one

A spectrophotometric method has been developed for the determination of Molybdenum (VI) using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one as a complexing agent. The complex formed was dissolved in water in the presence of Triton X-100 and exhibits an absorption maximum at 410 nm. A large number of metal ions like Co(II), Ni(II), Mn(II), Cr(III), Zn(II), Cu(II), Hg(II), Bi(III), Fe(II), Fe(III), Zr(IV), V(V) can be tolerated at an appreciable concentrations. Molar absorptivity and Sandell's sensitivity of the method is 2.80 x 10(5) l mol-1cm-1 and 3.42 x 10(-4) micrograms cm-2, respectively. Beer's law is obeyed in the concentration range of 0.01-0.4 ppm Mo(VI). Aliquots containing 0.2 ppm of Mo(VI) give a mean absorbance of 0.56 with a relative standard deviation of 1.3%.     

Oxalate-based soluble 2D magnets: the series [K(18-crown-6)]3[M(II)3(H2O)4{M(III)(ox)3}3] (M(III) = Cr, Fe; M(II) = Mn, Fe, Ni, Co, Cu; ox = C2O4(2-); 18-crown-6 = C12H24O6)

The synthesis and magnetic properties of the oxalate-based molecular soluble magnets with general formula [K(18-crown-6)] 3[M (II) 3(H 2O) 4{M (III)(ox) 3} 3] (M (III) = Cr, Fe; M (II) = Mn, Fe, Ni, Co, Cu; ox = C 2O 4 (2-)) are here described. All the reported compounds are isostructural and built up by 2D bimetallic networks formed by alternating M (III) and M (II) ions connected through oxalate anions. Whereas the Cr (III)M (II) derivatives behave as ferromagnets with critical temperatures up to 8 K, the Fe (III)M (II) present ferri- or weak ferromagnetic ordering up to 26 K.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

Novel acetate polyoxomolybdate "host" accommodating a zigzag-chainlike "guest" of five edge-shared sodium cations: Na(21)[[Na(5)(H(2)O)(14)]within[Mo(46)O(134)(OH)(10)(mu-CH(3)COO)(4)]].CH(3)COONa. approximately equal to 95H(2)O

A novel ESR-silent polyoxomolybdate Na(21)([Na(5)(H(2)O)(14)][Mo(46)O(134)(OH)(10)(mu-CH(3)COO)(4)]).CH(3)COONa.approximately equal to 90H(2)O (3) was simply synthesized in high yield by reducing an acidified aqueous solution of Na(2)MoO(4).2H(2)O and CH(3)COONa.3H(2)O. The structure of 3 is constructed by a 46-member crown-shaped anion, [Na(5)(H(2)O)(14)]within[Mo(V)(20)Mo(VI)(26)O(134)(OH)(10)(mu-CH(3)COO)(4)](21-), 3a, which is built up by three different but related building blocks in a new mode and further connected into layers via Na(+) and hydrogen bonds. Crystal data of compound 3: triclinic space group P(-1); a = 16.4065(3), b = 17.4236(2), c = 20.8247(3) A; alpha= 87.57, beta= 67.9810(10), gamma= 80.6970(10)o; V = 5445.08(14) A(3); Z = 1; D(calcd) = 2.902. Structure solution and refinement are based on 19014 reflections, R = 0.0750.