Effect of oxidant on the reaction of [RhCl(cyclooctadiene)(phosphine)] with 1-hexene

Summary A promoting role of an oxidant, present in commercial 1-hexene, in the substitution of phosphine in the complex [RhCl(COD)(phosphine)] (1) where the phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetra-methyldisiloxane] and COD=cycloocta-1,5-diene, has been detected and explained. When [oxidant]>[(1)] two reaction steps are distinguished: an oxidation of phosphine to phosphine oxide with generation of [RhCl(COD)], followed by its fast dimerization, and an oxidation of the dimer to Rh^III species. When [oxidant]<[(1)] the latter step is not observed and the reaction of [RhCl(COD)] with 1-hexene is favoured, particularly when an excess of phosphine (even at high oxidant concentration) is present. Most rate constants of the individual steps were evaluated.     

Synthesis of new C60 based phosphines

Two series of new phosphine derivatives based on C₆₀ protected by borane have been synthesized and characterized. These phosphines were used for two preliminary complexation trials with [RhCl(COD)]₂ and [Re(S₃CPh)₂(S₂CPh)] to afford, respectively, the corresponding complexes [RhCl(COD)(PRPh₂)] and [Re(S₂CPh)₃(PRPh₂)].     

Chelates formed by a constrained bis(diphenylphosphino)xylene; the crystal structures of [FeCl2(anphos)] and [RhCl(CO)(anphos-monoxide)]

The indan derived diphosphine, cis-1,3-(diphenylphosphino)indan (anphos) is synthesised by the addition of Ph₂P(BH₃)Li to cis-1,3-dibromoindan followed by deprotection with diethylamine. Anphos readily forms the bicyclic chelates [RhCl(CO)(anphos)], [PtCl₂(anphos)], [PtCl(Me)(anphos)] and [FeCl₂(anphos)]. The crystal structures of [FeCl₂(anphos)] and the monoxide complex, [RhCl(CO)(anphosO)] have been determined. Reaction of the diphosphine with [Rh(acac)(CO)₂] under moderate hydroformylation conditions catalysed the formation of 1-heptanal and branched aldehydes from 1-hexene in a ratio of 1.5:1.     

Complexes dinucleaires pontes des metaux d8: VII. Reactions d'addition oxydante d'halogenures d'alkyle et d'acycle aux complexes μ-halogenes du rhodium(i) [RhX(CO)(PR3)]2. Structure cristalline de [RhCl(CO)(PMe2Ph)(Me)(Br)]2

The halogen bridged binuclear complexes of rhodium(I) [RhCl(CO)(PR₃)]₂ undergo oxidative addition with methyl halides to yield the complexes [RhCl(CO)(PR₃)(Me)(X)]₂ (X = Cl, Br). The crystal and molecular structures of [RhCl(CO)(PMe₂Ph)(Me)(Br)]₂ have been determined from a single crystal by use of X-ray crystallographic methods. The space group is Pca2₁ or Pacm with a 19.501(5), b 10.381(4), c 13.641(5) e? Z = 4. Parameters of 30 nonhydrogen atoms in the space group Pca2₁ were refined by the full-matrix least squares technique to a conventional R factor of 0.073. In a binuclear unit, each rhodium atom is in an octahedral environment being bonded to a carbonyl group, a methyl group and a tertiary phosphine ligand and three halogen atoms for which, due to a disorder phenomenon, the diffusion factors have been determined as the average between those of chlorine and bromine atoms. In solution the cis-migration of the methyl groups occurs, leading to the acetyl complexes. In the case of CH₃I, it is shown that an equilibrium is present in solution: [RhCl(CO)(PR₃(Me)(I)]₂ ? [RhCl(COMe)(PR₃)(I)(solvant)]₂] Carbonylation reactions shift this equilibrium to give the complexes [RhCl(CO)(COMe)(PR₃(I)]₂. Such complexes are readily prepared by direct oxidative addition of acyl halides to the compounds [RhCl(CO)(PR₃)]₂.     

Rhodium(I) and Silver(I) Complexes of 4, 5‐Dicyano‐1, 3‐dimesityl‐ and 4, 5‐Dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene

The new N‐heterocyclic carbene (NHC) precursors 4, ‐dicyano‐1, ‐dimesityl‐ ( 9 ) and 4, 5‐dicyano‐1, 3‐dineopentyl‐2‐(pentafluorophenyl)imidazoline ( 14 ) were synthesized. The structure of 9 could be determined by X‐ray crystallography. With the 2‐pentafluorophenyl‐substituted imidazolines 9 and 14 , the [AgCl(NHC)], [RhCl(COD)(NHC)], and [RhCl(CO)₂(NHC)] complexes [NHC = 4, 5‐dicyano‐1, 3‐dimesitylimidazol‐2‐ylidene ( 3 ) and 4, 5‐dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene ( 4 )] were obtained. Crystal structures of [AgCl( 3 )] ( 15 ), [RhCl(COD)( 3 )] ( 17 ), [RhCl(COD)( 4 )] ( 18 ), and [RhCl(CO)₂( 3 )] ( 19 ) were solved and with the crystal data of 19 , the percent buried volume ( %V_bur) of 31.8(±0.1) % was determined for NHC 3 . Infrared spectra of the imidazolines 9 and 14 and of the complexes 15 – 20 were recorded and the CO stretching frequencies of complexes 19 and 20 were used to determine the Tolman electronic parameters of the newly obtained NHCs 3 (TEP: 2060 cm^–1) and 4 (TEP: 2061 cm^–1), thus proving that 1, 3‐substitution of maleonitrile‐NHCs does not have a significant effect for the high π‐acceptor strength of these carbenes.     

Bidentate amine N-oxides and phosphine oxides as ligands in rhodium(I) chemistry

Cationic rhodium(I) complexes of the general formula [Rh(COD)L₂]ClO₄ (L₂ = bipyO₂, phenO, dpeO₂ and dpmO₂) are prepared from the solvated species [Rh(COD)(Me₂CO)_x]⁺ and the appropriate ligand. Complexes of the type [Rh_n(COD)_n](ClO₄)_n (CNPyO = 4-cyano and 2-cyanopyridine N-oxide) are obtained similarly. Reaction of [RhCl(COD)]₂ with the potassium salt of 2-picolinic acid N-oxide leads to the neutral complex Rh(COOPyO)(COD). The mononuclear rhodium diolefinic compounds react with carbon monoxide to give complexes of the type [Rh(CO)₂L₂]ClO₄ and Rh(COOPyO)(CO)₂, which on treatment with triphenylphosphine yield monocarbonyl derivatives.The catalytic activities of the diolefin complexes and related derivatives in hydrogen-transfer catalytic reactions have been studied.     

Markovnikov hydroformylation catalyzed by ROPAC in the presence of phosphine and phosphine oxide ligands

Rhodium-catalyzed hydroformylation of 1-octene in the presence of different phosphine and phosphine oxide ligands has been investigated. The molecular structure of new phosphine ligand, fluorenylidine methyl phenyl diphenylphosphine, was determined by single-crystal X-ray crystallography. Parameters such as different ligands, molar ratio of ligand to rhodium complex, ratio of olefin to rhodium complex, pressure of CO : H₂ mixture, and time of the reaction were studied. The linear aldehyde was the main product when the phosphine ligands were used as auxiliary ligands while the selectivity was changed to the branched products when the related phosphine oxide ligands were used. Under optimized reaction conditions, in the presence of [Rh(acac)(CO)(Ph₃P)]-di(1-naphthyl)phenyl phosphine oxide, conversion of 1-octene reached 97% with 87% selectivity of branched aldehyde.     

New Pentacoordinated Rhodium Species as Unexpected Products during the In Situ Generation of Dimeric Diphosphine‐Rhodium Neutral Catalysts

Dimeric rhodium complexes of the type [Rh(PP)(μ₂‐Cl)]₂ (PP=diphosphine) are often used as precatalysts and are generated “in situ” from the corresponding diolefin complexes by exchange of the diene with the desired diphosphine. Herein, we report that the “in situ” procedure also leads to unexpected monomeric pentacoordinated neutral complexes of the type [RhCl(PP)(diolefin)], for the first time herein characterized by NMR spectroscopy and X‐ray crystallography for the ligands 1,4‐bis(diphenylphosphino)propane (DPPP), 1,4‐bis(diphenylphosphino)butane (DPPB), and 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (BINAP). The pentacoordinated complexes are in equilibrium with the dimeric target compound [Rh(PP)(μ₂‐Cl)]₂. The equilibrium is influenced by the rhodium‐diolefin precursor, the solvent and the temperature. Based on the results of NMR and UV/Vis spectroscopic analysis (kinetics) it could be shown that the pentacoordinated complex [RhCl(PP)(diolefin)] may arise both from the “in situ”‐generated neutral complex [Rh(PP)(μ₂‐Cl)] by reaction with the free diolefin and, more surprisingly, directly from [Rh(diolefin)(μ₂‐Cl)]₂ and the diphosphine.     

Synthesis and catalytic properties of N -functionalised carbene complexes of rhodium(I)

Reaction of [RhCl(COD)]₂, with 1,3-dialkylimidazolinylidene (1) or 1,3-dialkylbenzimidazolinylidene (2) resulted in the formation of rhodium(I) 1,3-dialkylimidazolin-2-ylidene (3a-c) and 1,3-dialkylbenzimidazolin-2-ylidene (4a,b) complexes. Triethylsilane reacts with acetophenone derivatives in the presence of catalytic amounts of RhCl(COD)(1,3-dialkylimidazolin-2-ylidene) or RhCl(COD)(1,3-dialkylbenzimidazolin-2-ylidene) to give the corresponding silylethers in good yield (57–98%).     

Intramolecular alkyl phosphine dehydrogenation in cationic rhodium complexes of tris(cyclopentylphosphine)

[Rh(nbd)(PCyp(3))(2)][BAr(F) (4)] (1) [nbd = norbornadiene, Ar(F) = C(6)H(3)(CF(3))(2), PCyp(3) = tris(cyclopentylphosphine)] spontaneously undergoes dehydrogenation of each PCyp(3) ligand in CH(2)Cl(2) solution to form an equilibrium mixture of cis-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 a) and trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 b), which have hybrid phosphine-alkene ligands. In this reaction nbd acts as a sequential acceptor of hydrogen to eventually give norbornane. Complex 2 b is distorted in the solid-state away from square planar. DFT calculations have been used to rationalise this distortion. Addition of H(2) to 2 a/b hydrogenates the phosphine-alkene ligand and forms the bisdihydrogen/dihydride complex [Rh(PCyp(3))(2)(H)(2)(eta(2)-H(2))(2)][BAr(F) (4)] (5) which has been identified spectroscopically. Addition of the hydrogen acceptor tert-butylethene (tbe) to 5 eventually regenerates 2 a/b, passing through an intermediate which has undergone dehydrogenation of only one PCyp(3) ligand, which can be trapped by addition of MeCN to form trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(PCyp(3))(NCMe)][BAr(F) (4)] (6). Dehydrogenation of a PCyp(3) ligand also occurs on addition of Na[BAr(F) (4)] to [RhCl(nbd)(PCyp(3))] in presence of arene (benzene, fluorobenzene) to give [Rh(eta(6)-C(6)H(5)X){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (7: X = F, 8: X = H). The related complex [Rh(nbd){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] 9 is also reported. Rapid ( approximately 5 minutes) acceptorless dehydrogenation occurs on treatment of [RhCl(dppe)(PCyp(3))] with Na[BAr(F) (4)] to give [Rh(dppe){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (10), which reacts with H(2) to afford the dihydride/dihydrogen complex [Rh(dppe)(PCyp(3))(H)(2)(eta(2)-H(2))][BAr(F) (4)] (11). Competition experiments using the new mixed alkyl phosphine ligand PCy(2)(Cyp) show that [RhCl(nbd){PCy(2)(Cyp)}] undergoes dehydrogenation exclusively at the cyclopentyl group to give [Rh(eta(6)-C(6)H(5)X){PCy(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (17: X = F, 18: X = H). The underlying reasons behind this preference have been probed using DFT calculations. All the complexes have been characterised by multinuclear NMR spectroscopy, and for 2 a/b, 4, 6, 7, 8, 9 and 17 also by single crystal X-ray diffraction.     

Synthesis of Ir Catalysts Featuring Amide-functionalized NHC Ligands and Survey of their Activity on Formic Acid Dehydrogenation

2 a and 2 b , [Ir(CI)(COD)(NHC)] (COD=1,5-cyclooctadiene), have been prepared via transmetallation from NHC−Ag complexes. [Rh(CI)(COD)(NHC)] ( 4 ) was prepared analogously. [Ir({κ-C,N-(NHC-acetamide−1H)}(COD)] ( 3 c ) has been synthesized via transmetallation from the deprotonated NHC−Ag complex. [IrCp*({κ-C,N-(NHC-acetamide−1H)}] ( 5 ) (Cp*=pentamethylcyclopentadienyl), has been obtained analogously. [Ir(CI)(CO)₂(NHC)] ( 6 ) and [Ir({κ-C,N-(NHC-acetamide−1H)}(CO)₂] ( 7 ) have been prepared by carbonylation of 2 b and 3 c , respectively. The catalytic activity of these complexes has been evaluated in the dehydrogenation of formic acid, under solventless conditions, in the presence of water as a cosolvent, and in a 5 : 2 HCOOH/Et₃N mixture, with the best TOF values being obtained in the case of the latter. Stoichiometric experiments suggest COD hydrogenation as the preactivation step.     

[2-(6,6-Dimethylbicyclo[3.3.1]hept-2-enyl)ethyl]-diphenylphosphine and phosphine oxide. Coordination properties and application in catalysis

[2-(6,6-Dimethylbicyclo[3.1.1]hept-2-enyl)ethyl]diphenylphosphine and the corresponding phosphine oxide, that hold promise as ligands in metal complex catalysis, were synthesized on the basis of (1R)-(-)-nopol. A Pd(II) bisphosphine complex is obtained on the basis of the synthesized phosphine. When the system [PdCl₂(COD)]-[2-(6,6-dimethylbicyclo[3.1.1]hept-2-enyl)ethyl]diphenylphosphine oxide is used as catalyst in the reaction of cyclohexa-1,3-diene with trichlorosilane, asymmetric induction occurs.     

Hydroformylation of 1-Hexene Catalyzed by [Rh(COD)(2-Picoline)2]PF6 Immobilized on Poly(4-Vinylpyridine) Under Water Gas Shift Reaction Conditions

Reported here is the influence of the reaction conditions variation (1-hexene/rhodium content (S/C) = 16 - 105, temperature (T) = 70 - 110 °C and carbon monoxide pressure (P(CO)) = 0.6 - 1.8 atm) on the catalytic hydroformylation of 1-hexene to aldehydes (heptanal and 2-methyl-hexanal) by the rhodium(I) complex, [Rh(COD)(2-picoline)₂]PF₆ (COD = 1,5-cyclooctadiene)immobilized on poly(4-vinylpyridine) in contact with 10 mL of 80% aqueous 2-ethoxyethanol, under water gas shift reaction condition. This revised version was published online in June 2006 with corrections to the Cover Date.     

Rhodium phosphine complexes immobilized on silica as active catalysts for 1-hexene hydroformylation and arene hydrogenation

In immobilizing the rhodium complexes [Rh(acac)(CO)(P)] (1) and [Rh(acac)(P)₂] (2) (P = Ph₂PCH₂CH₂Si(OMe)₃) onto SiO₂, acetylacetone is found to be released through protonation of the acac ligand by the acidic silica-OH groups. The resulting complexes [Rh(O-{SiO₂}(HO-{SiO₂})(CO)(P-{SiO₂})] (1a) and [Rh(O-{SiO₂})(HO-{SiO₂})(P-{SiO₂})₂] (2a) were successfully tested with respect to their catalytic action on 1-hexene hydroformylation as well as benzene and toluene hydrogenation. The reaction outcome, viz. the formation of aldehydes versus isomerization, depends strongly on the presence and concentration of a phosphine co-catalyst. Thus, while 1a gave only a 17% yield of aldehyde in the absence of phosphines, the yield is increased to 54% in the presence of phosphinated silica P-{SiO₂} or even 94% if PPh₃ is added to the solution. Without extra added phosphine, both 1a and 2a effect mainly the isomerization of 1-hexene to 2-hexene. Pre-catalyst 1a catalyzes also the hydrogenation of benzene at 10.5 atm H₂ and 90 °C to give cyclohexane with a TOF of 608 h⁻¹.     

Luminescent mononuclear and dinuclear cycloplatinated (II) complexes comprising azide and phosphine ancillary ligands

A new series of cycloplatinated (II) complexes with general formulas of [Pt (bhq)(N₃)(P)] [bhq = deprotonated 7,8‐benzo[h]quinoline, P = triphenyl phosphine (PPh₃) and methyldiphenyl phosphine], [Pt (bhq)(P^P)]N₃ [P^P = 1,1‐bis (diphenylphosphino)methane (dppm) and 1,2‐bis (diphenylphosphino)ethane] and [Pt₂(bhq)₂(μ‐P^P)(N₃)₂] [P^P = dppm and 1,2‐bis (diphenylphosphino)acetylene] is reported in this investigation. A combination of azide (N₃^?) and phosphine (monodentate and bidentate) was used as ancillary ligands to study their influences on the chromophoric cyclometalated ligand. All complexes were characterized by nuclear magnetic resonance spectroscopy. To confirm the presence of the N₃^? ligand directly connected to the platinum center, complex [Pt (bhq)(N₃)(PPh₃)] was further characterized by single‐crystal X‐ray crystallography. The photophysical properties of the new products were studied by UV–Vis spectroscopy in CH₂Cl₂ and photoluminescence spectroscopy in solid state (298 or 77 K) and in solution (77 K). Using density functional theory calculations, it was proved that, in addition to intraligand charge‐transfer (ILCT) and metal‐to‐ligand charge‐transfer (MLCT) transitions, the L′LCT (L′ = N₃, L = C^N) electronic transition has a remarkable contribution in low energy bands of the absorption spectra (for complexes [Pt (bhq)(N₃)(P)] and [Pt₂(bhq)₂(μ‐P^P)(N₃)₂]). It is indicative of the determining role of the N₃^? ligand in electronic transitions of these complexes, specifically in the low energy region. In this regard, the photoluminescence studies indicated that the emissions in such complexes originate from a mixed ³ILCT/³MLCT (intramolecular) and also from aggregations (intermolecular).     

New rhodium(III) and ruthenium(II) water-soluble complexes with 3,5-diaza-1-methyl-1-azonia-7-phosphatricyclo[3.3.1.1(3,7)]decane

The new water-soluble phosphine complexes of rhodium(III), [RhI(4)(mtpa)(2)]I (1), and ruthenium(II), [RuI(4)(mtpa)(2)].2H(2)O (2) and [RuI(2)(mtpa)(3)(H(2)O)]I(3).2H(2)O (3) (mtpa = 3,5-diaza-1-methyl-1-azonia-7-phosphatricyclo[3.3.1.1(3,7)]decane cation), have been prepared in the reactions of RhCl(3).3H(2)O and RuCl(3).3H(2)O in water in the presence of phosphine and potassium iodide. Properties and reactivity of the complexes have been investigated using (1)H and (31)P NMR and IR spectroscopies. The complexes have also been structurally characterized by single crystal X-ray diffraction studies. The compounds [RhI(4)(mtpa)(2)]I and [RuI(4)(mtpa)(2)].2H(2)O are zwitterionic octahedral complexes. The compounds were tested as catalysts for two-phase hydroformylation of 1-hexene and hydrogenation of cinnamaldehyde. Complex 1 is a selective catalyst for reduction of the C=C bond while complexes 2 and 3 selectively hydrogenate the C=O bond.     

Stereoselective synthesis of cationic heterobidentate C(NHC)/SR rhodium(I) complexes using stereodirecting N,N-dialkylamino groups

The synthesis of two different types of chiral C/S ligands based upon N-(N,N-dialkylamino)-substituted N-heterocyclic carbenes and thioether functionalities, along with their neutral [RhCl(CNH)(COD)] and cationic [Rh(I)(NHC/S)(COD)]⁺ complexes, has been accomplished. (S)-2-[(Phenylthio)methyl]pyrrolidine, carrying the thioether moiety, and (2S,5S)-2,5-diphenylpyrrolidine, combined with a thioether functionalized side chain, were studied as potential stereodirecting groups. Only the latter provided high selectivity in the formation of the neutral complex, leading to a single atropoisomer (de >98%) of the newly formed, configurationally stable C(NHC)–Rh bond. The synthesis of the corresponding cationic [Rh(I)(NHC/S)(COD)]⁺ complexes, however, resulted in the formation of single (R_a,S_S) and (S_a,S_S) diastereomers, respectively, of the four possible complexes in each case [combinations of the (R_a/S_a) C(NHC)–Rh axis and the (S_s/R_s) stereogenic S center formed upon coordination]. For the proline derivative, the resolution of the mixture of (R_a/S_a)-[RhCl(CNH)(COD)] neutral complexes proceeds via dynamic kinetic resolution through coordinatively unsaturated Rh(I) intermediates formed after halide abstraction. The absolute configurations of both types of cationic complexes were unequivocally assigned on the basis of X-ray diffraction analysis.     

Oxidative addition of different electrophiles with rhodium(I) carbonyl complexes of unsymmetrical phosphine–phosphine monoselenide ligands

Dimeric chlorobridge complex [Rh(CO)₂Cl]₂ reacts with two equivalents of a series of unsymmetrical phosphine–phosphine monoselenide ligands, Ph₂P(CH₂)_nP(Se)Ph₂ {n = 1( a ), 2( b ), 3( c ), 4( d )}to form chelate complex [Rh(CO)Cl(P∩Se)] ( 1a ) {P∩Se = η²‐(P,Se) coordinated} and non‐chelate complexes [Rh(CO)₂Cl(P～Se)] ( 1b–d ) {P～Se = η¹‐(P) coordinated}. The complexes 1 undergo oxidative addition reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to produce Rh(III) complexes of the type [Rh(COR)ClX(P∩Se)] {where R = ? C₂H₅ ( 2a ), X = I; R = ? CH₂C₆H₅ ( 3a ), X = Cl}, [Rh(CO)ClI₂(P∩Se)] ( 4a ), [Rh(CO)(COCH₃)ClI(P～Se)] ( 5b–d ), [Rh(CO)(COH₅)ClI‐(P～Se)] ( 6b–d ), [Rh(CO)(COCH₂C₆H₅)Cl₂(P～Se)] ( 7b–d ) and [Rh(CO)ClI₂(P～Se)] ( 8b–d ). The kinetic study of the oxidative addition (OA) reactions of the complexes 1 with CH₃I and C₂H₅I reveals a single stage kinetics. The rate of OA of the complexes varies with the length of the ligand backbone and follows the order 1a > 1b > 1c > 1d . The CH₃I reacts with the different complexes at a rate 10–100 times faster than the C₂H₅I. The catalytic activity of complexes 1b–d for carbonylation of methanol is evaluated and a higher turnover number (TON) is obtained compared with that of the well‐known commercial species [Rh(CO)₂I₂]^?. Copyright © 2006 John Wiley & Sons, Ltd.     

Triphenylphosphine-Functionalized Core-Cross-Linked Micelles and Nanogels with a Polycationic Outer Shell: Synthesis and Application in Rhodium-Catalyzed Biphasic Hydrogenations

Unimolecular amphiphilic nanoreactors with a poly(4-vinyl-N-methylpyridinium iodide) (P4VPMe⁺I⁻) polycationic outer shell and two different architectures (core-cross-linked micelles, CCM, and nanogels, NG), with narrow size distributions around 130–150 nm in diameter, were synthesized by RAFT polymerization from an R₀-4VPMe⁺I⁻₁₄₀-b-S₅₀-SC(S)SPr macroRAFT agent by either chain extension with a long (300 monomer units) hydrophobic polystyrene-based block followed by cross-linking with diethylene glycol dimethacrylate (DEGDMA) for the CCM particles, or by simultaneous chain extension and cross-linking for the NG particles. A core-anchored triphenylphosphine (TPP) ligand functionality was introduced by using 4-diphenylphosphinostyrene (DPPS) as a comonomer (5–20 % mol mol⁻¹) in the chain extension (for CCM) or chain extension/cross-linking (for NG) step. The products were directly obtained as stable colloidal dispersions in water (latexes). After loading with [RhCl(COD)]₂ to yield [RhCl(COD)(TPP@CCM)] or [RhCl(COD)(TPP@NG)], respectively, the polymers were used as polymeric nanoreactors in Rh-catalyzed aqueous biphasic hydrogenation of the model substrates styrene and 1-octene, either neat (for styrene) or in an organic solvent (toluene or 1-nonanol). All hydrogenations were rapid (TOF up to 300 h⁻¹) at 25 °C and 20 bar of H₂ pressure, the biphasic mixture rapidly decanted at the end of the reaction (<2 min), the Rh loss was negligible (<0.1 ppm in the recovered organic phase), and the catalyst phase could be recycled 10 times without significant loss of catalytic activity.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.