Excellent Capacitive Performance of a Three‐Dimensional Hierarchical Porous Graphene/Carbon Composite with a Superhigh Surface Area

Three‐dimensional hierarchical porous graphene/carbon composite was successfully synthesized from a solution of graphene oxide and a phenolic resin by using a facile and efficient method. The morphology, structure, and surface property of the composite were investigated intensively by a variety of means such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption, Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR). It is found that graphene serves as a scaffold to form a hierarchical pore texture in the composite, resulting in its superhigh surface area of 2034 m²g^?1, thin macropore wall, and high conductivity (152 S m^?1). As evidenced by electrochemical measurements in both EMImBF₄ ionic liquid and KOH electrolyte, the composite exhibits ideal capacitive behavior, high capacitance, and excellent rate performance due to its unique structure. In EMImBF₄, the composite has a high energy density of up to 50.1 Wh kg^?1 and also possesses quite stable cycling stability at 100 °C, suggesting its promising application in high‐temperature supercapacitors. In KOH electrolyte, the specific capacitance of this composite can reach up to an unprecedented value of 186.5 F g^?1, even at a very high current density of 50 A g^?1, suggesting its prosperous application in high‐power applications.     

Synthesis of Phosphorus‐Doped Graphene and its Wide Potential Window in Aqueous Supercapacitors

Phosphorus‐doped (P‐doped) graphene with the P doping level of 1.30 at % was synthesized by annealing the mixture of graphene and phosphoric acid. The presence of P was confirmed by elemental mapping and X‐ray photoelectron spectroscopy, while the morphology of P‐doped graphene was revealed by using scanning electron microscopy and transmission electron microscopy. To investigate the effect of P doping, the electrochemical properties of P‐doped graphene were tested as a supercapacitor electrode in an aqueous electrolyte of 1 M H₂SO₄. The results showed that doping of P in graphene exhibited significant improvement in terms of specific capacitance and cycling stability, compared with undoped graphene electrode. More interestingly, the P‐doped graphene electrode can survive at a wide voltage window of 1.7 V with only 3 % performance degradation after 5000 cycles at a current density of 5 A g^?1, providing a high energy density of 11.64 Wh kg^?1 and a high power density of 831 W kg^?1.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Synthesis of Hierarchically Porous Sandwich‐Like Carbon Materials for High‐Performance Supercapacitors

For the first time, hierarchically porous carbon materials with a sandwich‐like structure are synthesized through a facile and efficient tri‐template approach. The hierarchically porous microstructures consist of abundant macropores and numerous micropores embedded into the crosslinked mesoporous walls. As a result, the obtained carbon material with a unique sandwich‐like structure has a relatively high specific surface (1235 m² g^?1), large pore volume (1.30 cm³ g^?1), and appropriate pore size distribution. These merits lead to a comparably high specific capacitance of 274.8 F g^?1 at 0.2 A g^?1 and satisfying rate performance (87.7 % retention from 1 to 20 A g^?1). More importantly, the symmetric supercapacitor with two identical as‐prepared carbon samples shows a superior energy density of 18.47 Wh kg^?1 at a power density of 179.9 W kg^?1. The asymmetric supercapacitor based on as‐obtained carbon sample and its composite with manganese dioxide (MnO₂) can reach up to an energy density of 25.93 Wh kg^?1 at a power density of 199.9 W kg^?1. Therefore, these unique carbon material open a promising prospect for future development and utilization in the field of energy storage.     

Porous Nitrogen‐doped Reduced Graphene Oxide Gels as Efficient Supercapacitor Electrodes and Oxygen Reduction Reaction Electrocatalysts

Heteroatom‐doped carbon materials have been widely used in energy storage and conversion such as supercapacitors and electrocatalysts. In this work, L‐asparagine (Asn), an amino acid derivative, has been used as a doping agent to prepare nitrogen‐ doped reduced graphene oxide gels (N‐GAs). The 3D interconnected structure gives rise to the superior electrochemical properties for supercapacitor and electrocatalytic oxygen reduction reaction (ORR). The N‐GA‐4 (the mass ratio of Asn to graphene oxide (GO) is 4 : 1 by hydrothermal method) electrode shows the capacitance of 291.6 F·g^–1 at 0.5 A·g^–1. Meanwhile, the assembled symmetric supercapacitor achieves a maximum energy density of 23.8 Wh· kg^–1 when the power density is 451.2 W·kg^–1, and demonstrates an ultralong cycling life that the retention of capacitance is 99.3% after 80000 cycles. What's more, the annealed aerogel N‐GA‐4‐900 exhibits an onset potential (E_onset) of 0.95 V, half wave potential (E_1/2) of 0.84 V (vs. RHE) and the oxygen reduction current density of 5.5 mA·cm^–2 at 0.1 V with nearly four‐electron transfer, which are superior to commercial Pt/C. This work offers a new insight into the synthesis and applications of N‐GAs materials towards high performance in supercapacitors and ORR.     

KOH‐Activated Porous Carbons Derived from Chestnut Shell with Superior Capacitive Performance

Porous carbons (PC) were prepared from a waste biomass named chestnut shell via a two‐step method involving carbonization and KOH activation. The morphology, pore structure and surface chemical properties were investigated by scanning electron microscopy (SEM), N₂ sorption, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The carbons have been evaluated as the electrode materials for supercapacitors by a two‐electrode system in 6 mol/L KOH electrolyte. Benefiting from the porous texture, high surface area and high oxygen content, the PCs derived from chestnut shell have exhibited high specific capacitance of 198.2 (PC‐1), 217.2 (PC‐2) and 238.2 F·g^?1 (PC‐3) at a current density of 0.1 A·g^?1, good rate capability of 55.7%, 56.6% and 54.9% in a range of 0.1–20 A·g^?1 and high energy density of 5.6, 6.1 and 6.7 Wh·kg^?1, respectively. This is believed to be due to electric double layer capacitance induced by the abundant micropores and extra pseudo‐capacitance generated by oxygen‐containing groups. At a power density of 9000 Wh·kg^?1, the energy density is 3.1, 3.5 and 3.7 Wh·kg^?1 for PC‐1, PC‐2 and PC‐3, respectively, demonstrating the potential of the carbons derived from chestnut shells in energy storage devices.     

Three‐Dimensional Nitrogen‐Doped Hierarchical Porous Carbon as an Electrode for High‐Performance Supercapacitors

A facile and sustainable procedure for the synthesis of nitrogen‐doped hierarchical porous carbons with a three‐dimensional interconnected framework (NHPC‐3D) was developed. The strategy, based on a colloidal crystal‐templating method, utilizes nitrogenous dopamine as the precursor due to its unique properties, including self‐polymerization under mild alkaline conditions, coating onto various surfaces, a high carbonization yield, and well‐preserved nitrogen doping after heat treatment. The obtained NHPC‐3D possesses a high surface area of 1056 m² g^?1, a large pore volume of 2.56 cm³ g^?1, and a high nitrogen content of 8.2 wt %. The NHPC‐3D is implemented as the electrode material of a supercapacitor and exhibits a specific capacitance as high as 252 F g^?1 at a current density of 2 A g^?1. The device also shows a high capacitance retention of 75.7 % at a higher current density of 20 A g^?1 in aqueous electrolyte due to a sufficient surface area for charge accommodation, reversible pseudocapacitance, and minimized ion‐transport resistance, as a result of the advantageous interconnected hierarchical porous texture. These results showcase NHPC‐3D as a promising candidate for electrode materials in supercapacitors.     

Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Germanium Quantum Dots Embedded in N‐Doping Graphene Matrix with Sponge‐Like Architecture for Enhanced Performance in Lithium‐Ion Batteries

Germanium quantum dots embedded in a nitrogen‐doped graphene matrix with a sponge‐like architecture (Ge/GN sponge) are prepared through a simple and scalable synthetic method, involving freeze drying to obtain the Ge(OH)₄/graphene oxide (GO) precursor and subsequent heat reduction treatment. Upon application as an anode for the lithium‐ion battery (LIB), the Ge/GN sponge exhibits a high discharge capacity compared with previously reported N‐doped graphene. The electrode with the as‐synthesized Ge/GN sponge can deliver a capacity of 1258 mAh g^?1 even after 50 charge/discharge cycles. This improved electrochemical performance can be attributed to the pore memory effect and highly conductive N‐doping GN matrix from the unique sponge‐like structure.     

Highly Concentrated Electrolyte towards Enhanced Energy Density and Cycling Life of Dual‐Ion Battery

Dual‐ion batteries (DIBs) have attracted much attention owing to their low cost, high voltage, and environmental friendliness. As the source of active ions during the charging/discharging process, the electrolyte plays a critical role in the performance of DIBs, including capacity, energy density, and cycling life. However, most used electrolyte systems based on the LiPF₆ salt demonstrate unsatisfactory performance in DIBs. We have successfully developed a 7.5 mol kg^?1 lithium bis(fluorosulfonyl)imide (LiFSI) in a carbonate electrolyte system. Compared with diluted electrolytes, this highly concentrated electrolyte exhibits several advantages: 1) enhanced intercalation capacity and cycling stability of the graphite cathode, 2) optimized structural stability of the Al anode, and 3) significantly increased battery energy density. A proof‐of‐concept DIB based on this concentrated electrolyte exhibits a discharge capacity of 94.0 mAh g^?1 at 200 mA g^?1 and 96.8 % capacity retention after 500 cycles. By counting both the electrode materials and electrolyte, the energy density of this DIB reaches up to ≈180 Wh kg^?1, which is among the best performances of DIBs reported to date.     

CuO nanoparticles supported on three‐dimensional nitrogen‐doped graphene as a promising catalyst for thermal decomposition of ammonium perchlorate

In the present work, CuO nanoparticles grown on three‐dimensional nitrogen‐doped graphene‐based frameworks (CuO@3D‐(N)GFs) were synthesized using a two‐step method. After the synthesis of three‐dimensional nitrogen‐doped graphene, CuO nanoparticles were deposited on it, by adding cupric acetate followed by thermal treatment. Different analysis methods were used to characterize the products. The as‐prepared nanocomposite was used as a promising catalyst for thermal decomposition of ammonium perchlorate (AP) as one of the most common oxidizer in composite propellants. Differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA) techniques were used to investigate the thermal decomposition of ammonium perchlorate. According to the DSC/TGA, high temperature decomposition of AP decreased to 111 °C in the presence of 4% CuO@3D‐(N)GFs and the total heat release (ΔH) from decomposition of AP increased to 1893 J g^?1 which is much more than 590 J g^?1 for pure AP.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Superior Lithium‐Ion Storage Properties of Si‐Based Composite Powders with Unique Si@Carbon@Void@Graphene Configuration

Composite powders of the configuration Si@carbon@void@graphene were prepared by a one‐step spray pyrolysis process, by adding polyvinylpyrrolidone (PVP) to a precursor solution containing graphene oxide (GO) sheets and silicon nanoparticles (NPs). Morphological analysis indicates that the individual Si NPs are coated with amorphous carbon and encapsulated in a micrometer‐sized graphene ball structure that offers a large amount of buffer space. The addition of PVP improves the stability of the colloidal spray solution containing the GO sheets and the Si NPs. Consequently, the prepared Si@C@void@graphene composite powders have a relatively more uniform morphology than the Si@void@graphene composite powders prepared from the spray solution without PVP. The first charge and discharge capacities of the Si@C@void@graphene electrode measured at 0.1 A g^?1 are as high as 3102 and 2215 mA h g^?1, respectively. With an increase in the current rate from 0.5 to 11 A g^?1, 46 % of the original capacity (i.e., 2134 mA h g^?1) is maintained. After 500 cycles at a high rate of 7 A g^?1, the Si@C@void@graphene electrode shows 84 % capacity retention and 99.8 % of the average Coulombic efficiency. The superior cycling and rate capabilities of the prepared Si@C@void@graphene electrode could be attributed to the uniform carbon coating of the Si NPs and the graphene ball structure, which facilitates efficient diffusion of Li ions and prevents the penetration of electrolyte into graphene ball during cycling.     

A Porous Network of Bismuth Used as the Anode Material for High‐Energy‐Density Potassium‐Ion Batteries

Potassium‐ion batteries (KIBs) are plagued by a lack of materials for reversible accommodation of the large‐sized K⁺ ion. Herein we present, the Bi anode in combination with the dimethoxyethane‐(DME) based electrolyte to deliver a remarkable capacity of ca. 400 mAh g^?1 and long cycle stability with three distinct two‐phase reactions of Bi? KBi₂?K₃Bi₂?K₃Bi. These are ascribed to the gradually developed three‐dimensional (3D) porous networks of Bi, which realizes fast kinetics and tolerance of its volume change during potassiation and depotassiation. The porosity is linked to the unprecedented movement of the surface Bi atoms interacting with DME molecules, as suggested by DFT calculations. A full KIB of Bi//DME‐based electrolyte//Prussian blue of K_0.72Fe[Fe(CN)₆] is demonstrated to present large energy density of 108.1 Wh kg^?1 with average discharge voltage of 2.8 V and capacity retention of 86.5 % after 350 cycles.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Rechargeable Room‐Temperature Na–CO2 Batteries

Developing rechargeable Na–CO₂ batteries is significant for energy conversion and utilization of CO₂. However, the reported batteries in pure CO₂ atmosphere are non‐rechargeable with limited discharge capacity of 200 mAh g^?1. Herein, we realized the rechargeability of a Na–CO₂ battery, with the proposed and demonstrated reversible reaction of 3 CO₂+4 Na?2 Na₂CO₃+C. The battery consists of a Na anode, an ether‐based electrolyte, and a designed cathode with electrolyte‐treated multi‐wall carbon nanotubes, and shows reversible capacity of 60000 mAh g^?1 at 1 A g^?1 (≈1000 Wh kg^?1) and runs for 200 cycles with controlled capacity of 2000 mAh g^?1 at charge voltage <3.7 V. The porous structure, high electro‐conductivity, and good wettability of electrolyte to cathode lead to reduced electrochemical polarization of the battery and further result in high performance. Our work provides an alternative approach towards clean recycling and utilization of CO₂.     

A New Anode for Lithium‐Ion Batteries Based on Single‐Walled Carbon Nanotubes and Graphene: Improved Performance through a Binary Network Design

Carbon nanomaterials, especially graphene and carbon nanotubes, are considered to be favorable alternatives to graphite‐based anodes in lithium‐ion batteries, owing to their high specific surface area, electrical conductivity, and excellent mechanical flexibility. However, the limited number of storage sites for lithium ions within the sp²‐carbon hexahedrons leads to the low storage capacity. Thus, rational structure design is essential for the preparation of high‐performance carbon‐based anode materials. Herein, we employed flexible single‐walled carbon nanotubes (SWCNTs) with ultrahigh electrical conductivity as a wrapper for 3D graphene foam (GF) by using a facile dip‐coating process to form a binary network structure. This structure, which offered high electrical conductivity, enlarged the electrode/electrolyte contact area, shortened the electron‐/ion‐transport pathways, and allowed for efficient utilization of the active material, which led to improved electrochemical performance. When used as an anode in lithium‐ion batteries, the SWCNT‐GF electrode delivered a specific capacity of 953 mA h g^?1 at a current density of 0.1 A g^?1 and a high reversible capacity of 606 mA h g^?1 after 1000 cycles, with a capacity retention of 90 % over 1000 cycles at 1 A g^?1 and 189 mA h g^?1 after 2200 cycles at 5 A g^?1.     

In Situ Growth of MnO2 Nanosheets on N‐Doped Carbon Nanotubes Derived from Polypyrrole Tubes for Supercapacitors

Nitrogen‐doped porous carbon nanotubes@MnO₂ (N‐CNTs@MnO₂) nanocomposites are prepared through the in situ growth of MnO₂ nanosheets on N‐CNTs derived from polypyrrole nanotubes (PNTs). Benefiting from the synergistic effects between N‐CNTs (high conductivity and N doping level) and MnO₂ nanosheets (high theoretical capacity), the as‐prepared N‐CNTs@MnO₂‐800 nanocomposites show a specific capacitance of 219 F g^?1 at a current density of 1.0 A g^?1, which is higher than that of pure MnO₂ nanosheets (128 F g^?1) and PNTs (42 F g^?1) in 0.5 m Na₂SO₄ solution. Meanwhile, the capacitance retention of 86.8 % (after 1000 cycles at 10 A g^?1) indicates an excellent electrochemical performance of N‐CNTs@MnO₂ prepared in this work.     

Preparation of a NiAl‐Oxide@Polypyrrole Composite for High‐Performance Supercapacitors

A core‐shell NiAlO@polypyrrole composite (NiAlO@PPy) with a 3D “sand rose”‐like morphology was prepared via a facile in situ oxidative polymerization of pyrrole monomer, where the role of PPy coating thickness was investigated for high‐performance supercapacitors. Microstructure analyses indicated that the PPy was successfully coated onto the NiAlO surface to form a core‐shell structure. The NiAlO@PPy exhibited a better electrochemical performance than pure NiAlO, and the moderate thickness of the PPy shell layer was beneficial for expediting the electron transfer in the redox reaction. It was found that the NiAlO@PPy₅ prepared at 5.0 mL L^?1 addition amount of pyrrole monomer demonstrated the best electrochemical performance with a high specific capacitance of 883.2 F g^?1 at a current density of 1 A g^?1 and excellent capacitance retention of 91.82 % of its initial capacitance after 1000 cycles at 3 A g^?1. The outstanding electrochemical performance of NiAlO@PPy₅ were due to the synergistic effect of NiAlO and PPy, where the uniform network‐like PPy shell with the optimal thickness made electrolyte ions more easily accessible for faradic reactions. This work provided a simple approach for designing organic–inorganic core‐shell materials as high‐performance electrode materials for electrochemical supercapacitors.