Tin-derivative sandwich-type polyoxometalates supported on Nd-doped TiO2 nanoparticles as efficient and reusable catalysts in the oxidation of sulfides and alcohols

New nanocomposites, including different loading levels of sandwich-type polyoxometalates [(HOSn^IVOH)₃(XW₉O₃₄)₂]^n? (X = As (1), P (2) n = 12 and Si (3) n = 14) on Nd-doped TiO₂ nanoparticles were prepared by a simple impregnation method. The nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, Fourier transform infrared (FTIR), and energy-dispersive X-ray spectroscopy. Compounds 1–3 were successfully loaded on Nd-doped crystallized anatase-phase TiO₂ nanoparticles of 20–25 nm. Catalytic activities of nanocomposites were examined by carrying out the oxidation of sulfides and alcohols with H₂O₂. Simple synthesis method, reusability, and low amounts of the heterogeneous catalysts with a slight excess of H₂O₂ and mild reaction conditions make these oxidation reactions an environmentally benign chemical process.     

Thermal decomposition of metal nitrates

The paper presents a study regarding the preparation of 40 %M^IIFe₂O₄/60 %SiO₂ nanocomposites (M = Ni, Zn, Cu) by thermal decomposition of metal nitrates—poly(vinyl alcohol)–tetraethyl orthosilicate gels. Thermal analysis and FT-IR spectroscopy have evidenced that a redox reaction takes place between PVA and NO ₃ ^? ions in the pores of the formed hybrid gels. The result of this redox reaction is the formation of carboxylate-type coordination compounds that have the role of a precursor of the ferrite nanoparticles. By thermal decomposition of these precursors inside the silica matrix, the corresponding MFe₂O₄/SiO₂ nanocomposites are obtained starting with 600 °C, as resulting from XRD analysis. Elemental maps of the corresponding involved elements M (Ni, Zn, Cu), Fe, and Si have confirmed the homogenous distribution of the ferrite nanoparticles within the silica matrix. TEM images have shown that the nanocomposites were obtained as fine nanoparticles, with diameter up to 20 nm. All nanocomposites 40 %M^IIFe₂O₄/60 %SiO₂ obtained at 1000 °C presented magnetic properties characteristic to this type of nanocomposite.     

Facile synthesis of multiwalled carbon nanotube–V2O5 nanocomposites as cathode materials for Li-ion batteries

Multiwalled carbon nanotube (MWCNT)–vanadium pentoxide (V₂O₅) nanocomposites have been fabricated using a facile and environmental friendly hydrothermal method without any pretreatment, surfactants, or chelate agents added. The as-annealed nanocomposites are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), and the results indicate that V₂O₅ nanoparticles grew on MWCNTs. As a cathode material for lithium batteries, it exhibits superior electrochemical performance compare to the pure V₂O₅ powders. A high specific discharge capacity of 253 mA h g^?1 can be obtained for the 15 % MWCNT–V₂O₅ nanocomposite electrodes, which retains 209 mA h g^?1 after 50 cycles. However, the pure V₂O₅ powder electrodes only possess a specific discharge capacity of 157 mA h g^?1 with a capacity retention of 127 mA h g^?1 after 50 cycles. Moreover, the MWCNT–V₂O₅ nanocomposite electrodes show an excellent rate capability with a specific discharge capacity of 180 mA h g^?1 at the current rate of 4 C. The enhanced electrochemical performance of the nanocomposites is attributed to the formation of conductive networks by MWCNTs, and large surface areas of V₂O₅ nanoparticles grew on MWCNTs which stabilizes these nanoparticles against agglomeration.     

Enhanced zinc ion transport in gel polymer electrolyte: effect of nano-sized ZnO dispersion

The effect of the dispersion of zinc oxide (ZnO) nanoparticles in the zinc ion conducting gel polymer electrolyte is studied. Changes in the morphology/structure of the gel polymer electrolyte with the introduction of ZnO particles are distinctly observed using X-ray diffraction and scanning electron microscopy. The nanocomposites offer ionic conductivity values of >10^?3 S cm^?1 with good thermal and electrochemical stabilities. The variation of ionic conductivity with temperature follows the Vogel–Tamman–Fulcher behavior. AC impedance spectroscopy, cyclic voltammetry, and transport number measurements have confirmed Zn²⁺ ion conduction in the gel nanocomposites. An electrochemical stability window from ?2.25 to 2.25 V was obtained from voltammetric studies of nanocomposite films. The cationic (i.e., Zn²⁺ ion) transport number (t ₊) has been found to be significantly enhanced up to a maximum of 0.55 for the dispersion of 10 wt.% ZnO nanoparticles, indicating substantial enhancement in Zn²⁺ ion conductivity. The gel polymer electrolyte nanocomposite films with enhanced Zn²⁺ ion conductivity are useful as separators and electrolytes in Zn rechargeable batteries and other electrochemical applications.     

Electrical and electro-optical parameters of 4ʹ-octyl-4-cyanobiphenyl nematic liquid crystal dispersed with gold and silver nanoparticles

Thermodynamical, dielectric, optical and electro-optical characterisation of pure 8CB and its composites with gold and silver nanoparticles have been studied. Thermodynamical studies suggest a decrease in clearing temperature of the nanocomposite systems as compared to the pure system. Dielectric parameters of pure nematic liquid crystal and nanocomposites in the homeotropic and planar aligned samples have been measured in the frequency range of 1–35 MHz. Ionic conductivity increases significantly in nematic and smectic A_d (SmA_d) phases, whereas dielectric anisotropy is almost unchanged for both the nanocomposites. Threshold voltage for Freederick transition, switching voltage and splay elastic constant have decreased in the case of nanocomposite systems. Relaxation frequency and activation energy of an observed relaxation mode corresponding to molecular rotation about the short axis increase in the SmA_d phases of both the nanocomposites. The optical study suggests that due to dispersion of nanoparticles, the optical band gap has decreased.     

Liquid crystal composites with a high percentage of gold nanoparticles

We have reported in our previous work that doping low concentrations (up to 10% by weight) of gold nanoparticles (GNP) in a polar nematic 4’-hexyl-4-biphenylcarbonitrile (HBPCN) increases the dielectric anisotropy, while the switching voltage and times, and the nematic–isotropic liquid (IL) transition point of the mixtures are not affected by doped nanoparticles. In the current work we extend our study of the behaviour of HBPCN doped with higher than 10% GNP. We show that at certain gold concentrations – 35% and 45% – the nematic–IL phase transition point increases by 15°C in comparison with the pure nematic value. At the same concentrations the dielectric anisotropy increases from its value for the pure nematic by about 2.2 times for 35% and twice for 45%. Also, the threshold voltage increases by 0.2 V for 35% and decreases by 0.15 V for 45%. However, the switching-off times decrease for both concentrations: 7 ms for 35% and 12 ms for 45%. We propose that the described effects of doped GNP on the properties of the nematic are due to the formation of different kinds of aggregations between two components of the mixtures.     

Concurrent synthesis of SnO/SnO<Subscript>2</Subscript> nanocomposites and their enhanced photocatalytic activity

The SnO/SnO₂ nanocomposites were synthesized using semisolvothermal reaction technique. These nanocomposites were prepared using different combination of solvents viz., ethanol, water, and ethylene glycol at 180 °C for 24 h. The synthesized nanocomposites were analyzed with various characterization techniques. Structural analysis indicates the formation of tetragonal phase of SnO₂ for the sample prepared in ethanol, whereas for other solvent combinations, the mixture of SnO and SnO₂ having tetragonal crystal structures were observed. The optical study shows enhanced absorbance in the visible region for all the prepared SnO/SnO₂ nanocomposites. The observed band gap was found to be in the range of 3.0 to 3.25 eV. Microstructural determinations confirm the formation of nanostructures having spherical as well as rod-like morphology. The size of nanoparticles in ethanol-mediated solvent was found to be in the range of 5 to 7 nm. Thermogravimetric analysis indicate the weight gain around 1.3 wt% confirming the conversion of SnO to SnO₂ material. The photocatalytic activity of synthesized nanocomposites was evaluated by following the aqueous methylene blue (MB) degradation. The sample prepared in ethylene glycol-mediated solvent showed highest photoactivity having apparent rate constant (K_app) 0.62 × 10^?2 min^?1.     

Confined crystallization behaviors in polyethylene/silica nanocomposites: Synergetic effects of interfacial interactions and filler network

The confinement effects introduced by nanoparticles have been reported to influence the phase behaviors thus the properties of polymer nanocomposites. In this study, molecular dynamics and crystallization behaviors of polyethylene (PE) composited with three types of silica (SiO₂) nanoparticles, namely unmodified SiO₂, hydrophobically modified SiO₂, SiO₂‐APTES (3‐aminopropyltriethoxysilane) and SiO₂‐PTES (n‐propyltriethoxysilane), were systematically investigated via a combination of DSC, XRD and ¹H solid‐state NMR measurements. The suppressions in crystallization and chain mobilities of PE rank in the order of unmodified SiO₂ < SiO₂‐APTES < SiO₂‐PTES due to the increasing interfacial interactions between PE and SiO₂ nanoparticles. Additionally, independent of polymer–nanoparticle interactions, a silica network forms for all three kinds of nanocomposites when SiO₂ content reaches 83 wt %. The mobilities of polymer chains are severely restricted by such a percolated network structure, leading to a turning point in the crystallization ability of nanocomposites and a new crystallization peak at 45 °C lower than that of pure PE. The synergetic effects of interfacial interactions and filler network on polymer crystallization have been thoroughly studied in this work, which will provide guidance on modifying and designing nanocomposites with controlled properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 498–505     

Co3O4/SiO2 nanocomposites for supercapacitor application

In this study, Co₃O₄/SiO₂ nanocomposites have been successfully synthesized by citrate–gel method by utilizing SiO₂ matrix for Co₃O₄ embedment. Spectroscopy analyses confirm the formation of high crystalline Co₃O₄ nanoparticles; meanwhile, microscopy findings reveal that the Co₃O₄ nanoparticles are embedded in SiO₂ matrix. Electrochemical properties of the Co₃O₄/SiO₂ nanocomposites were carried out using cyclic voltammetry (CV), galvanostatic charge–discharge, and electrochemical impedance spectroscopy (EIS) in 5 M KOH electrolyte. The findings show that the charge storage of Co₃O₄/SiO₂ nanocomposites is mainly due to the reversible redox reaction (pseudocapacitance). The highest specific capacitance of 1,143 F g ^?1 could be achieved at a scan rate of 2.5 mV s^?1 in the potential region between 0 and 0.6 V. Furthermore, high-capacitance retention (>92 %) after 900 continuous charge–discharge tests reveals the excellent stability of the nanocomposites. It is worth noting from the EIS measurements that the nanocomposites have low ESR value of 0.33 Ω. The results manifest that Co₃O₄/SiO₂ nanocomposites are the promising electrode material for supercapacitor application.     

Sucrose assisted hydrothermal synthesis of SnO2/graphene nanocomposites with improved lithium storage properties

SnO₂/graphene nanocomposites are synthesized by a new hydrothermal treatment strategy under the assistance of sucrose. From the images of the scanning electron microscope (SEM) and transmission electron microscope (TEM), it can be observed that SnO₂ nanoparticles with the size of 4~5 nm uniformly distribute on the graphene nanosheets. The result demonstrates that sucrose can effectively prevent graphene nanosheets from restacking during hydrothermal treatment and subsequently treatment. The charging/discharging test result indicates that the SnO₂/graphene nanocomposites exhibit high specific capacity and excellent cycleability. The first reversible specific capacity is 729 mAh.g^?1 at the current density of 50 mA.g^?1, and remains 646 mAh.g^?1 after 30 cycles at the current density of 100 mA.g^?1, 30 cycles at the current density of 200 mA.g^?1, 30 cycles at the current density of 400 mA.g^?1, 30 cycles at the current density of 800 mA.g^?1, and 30 cycles at the current density of 50 mA.g^?1.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.     

Extended conjugated mesogens: synthesis and mesomorphic properties of H-shaped mesogens based on 3,3ʹ,5,5ʹ-tetrasubstituted 2,2ʹ-bithiophene with oligo(1,4-phenyleneethynylene) arms

A new class of extended conjugated mesogens, namely H-shaped mesogens based on 3,3?,5,5?-tetrasubstituted 2,2?-bithiophene with oligo(1,4-phenyleneethynylene) arms, have been synthesised, and the relationships between molecular structures and mesomorphic properties investigated. Tetraalkyl, tetraalkoxy and dialkyldialkoxy derivatives, [R¹C₆H₄CCC₆H₂(C₂H₅)₂CC]₂[R²C₆H₄CCC₆H₂(C₂H₅)₂CC]₂C₈H₂S₂ where R¹ and R² = alkyl and alkoxy chains of different lengths, exhibit nematic phases. The length, number and position of the terminal chains strongly affect the mesomorphic properties. The tetraalkyl derivatives in which R¹ = R² = pentyl to heptyl exhibit enantiotropic mesophases, whereas the derivatives with octyl or nonyl chains exhibit monotropic mesophases. The tetraalkoxy derivatives in which R¹ = R² = pentyloxy to nonyloxy all exhibit enantiotropic nematic phases. The mesophase range increases with increasing alkoxy chain length, except that the octyloxy and nonyloxy derivatives have almost the same temperature range. The dialkyldialkoxy derivatives in which R¹ = alkyl; R² = alkoxy and in which R¹ = alkoxy; R² = alkyl (R¹ and R² = heptyl, nonyl, hexyloxy or nonyloxy) exhibit enantiotropic mesophases. The derivatives in which R¹ = alkoxy have a significantly lower crystal–nematic transition temperature than the corresponding derivatives (R² = alkoxy), although the two types of derivatives have a similar nematic–isotropic transition temperature.     

Director configurations in nematic droplets with tilted surface anchoring

The polymer dispersed nematic liquid crystal (LC) with the tilted surface anchoring has been studied. The droplet orientational structures with two point surface defects – boojums and the surface ring defect – are formed within the films. The director tilt angle α = 40° ± 4° at the droplet interface and LC surface anchoring strength W_s ~ 10^–6 (J m^?2) have been estimated. The bipolar axes within the studied droplets of oblate ellipsoidal form can be randomly oriented are oriented randomly relatively to the ellipsoid axes as opposed to the droplets with homeotropic and tangential anchoring.     

Preparation of NiO/multiwalled carbon nanotube nanocomposite for use as the oxygen cathode catalyst in rechargeable Li–O2 batteries

NiO/multiwalled carbon nanotube (NiO/MWCNT) nanocomposites have been prepared and used for a Li–O₂ battery cathode catalyst. Electrochemical measurements demonstrate that the batteries with NiO/MWCNT catalyst have a discharge capacity of 2,500 mAh g^?1, a charge capacity of 2,100 mAh g^?1, and a rechargeable ability performing better than Ketjenblack (KB) and MWCNTs. KB has the largest discharge capacity (2,700 mAh g^?1) due to the highest surface area and pore volume but the worst charging behavior due to poor mass transport in the small-width pore (2.48 nm). MWCNTs have a much better charging performance owing to a larger pore width (8.93 nm) than carbon black. NiO/MWCNTs have the largest charge capacity because of the facilitated mass transport in the comparatively large pores (7.68 nm) and the increased catalytic ability produced by the NiO nanoparticles. These improvements are also responsible for the best cycle and rate performances of the nanocomposites among the three catalysts.     

Flame atomic absorption spectrometric determination of Cu and Ni in tobacco samples after Preconcentration using ammonium pyrrolidine dithiocarbamate modified magnetic nanoparticles

Fe₃O₄ nanoparticles coated with SiO₂ and modified with ammonium pyrrolidine dithiocarbamate as a new adsorbent for the single-step extraction and preconcentration of trace amounts of copper and nickel from tobacco samples were prepared. The particle sizes of nanoparticles were characterised by transmission electron microscope. Several parameters affecting the analytical performance, such as the amount of ammonium pyrrolidine dithiocarbamate, amount of magnetic nanoparticles, pH, contact time, coexisting ions, desorption solution and reuse times of magnetic solid-phase extraction, were discussed and optimised. The analytes desorbed from magnetic nanoparticles were determined by flame atomic absorption spectrometry. Under the optimum conditions, the analytical linear ranges were 0.02–15 mg/L for Cu and 0.02–20 mg/L for Ni (R² > 0.9992). The relative standard deviations (RSDs, n = 5) of 1.8% and 2.1% were obtained for Cu and Ni, respectively. The method detection limits were 0.0028 μg/g for Cu and 0.0037 μg/g for Ni. The proposed method was successfully applied to tobacco sample analysis and got excellent recoveries in the range of 89.6–102.3% and RSDs (n = 5) of 1.2–2.5%. This method is much faster and more effective than traditional methods, and it is promising for the analysis of heavy metals.     

Photodegradation of 2-nitrophenol catalyzed by CoO, CoS and CoO/CoS nanoparticles

The nanoparticles of CoO, CoS and CoO/CoS composite are synthesized using precipitation method. The X-ray diffraction, UV–Vis absorption spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy and FT-IR spectroscopy are used to characterize the prepared nanoparticles. The EDX analysis shows the formation of CoO_0.67S_0.33 composite. The XRD pattern indicates the hexagonal structure for nanocomposite. The formation of Co–O and Co–S bonds is confirmed by FT-IR spectra. The band-gap energies of 2.97, 3.06 and 2.91 eV are obtained from UV–Vis spectra of CoO, CoS and CoO/CoS nanoparticles, respectively. The results of photodegradation of 2-nitrophenol show that the photoreactivity order of nanocatalysts is CoO/CoS > CoO > CoS. The pseudo first-order kinetic rate constants of 6.4 × 10^?3, 4.3 × 10^?3 and 12.2 × 10^?3 min^?1 are obtained for CoO, CoS and CoO/CoS nanoparticles, respectively, at photodegradation reaction conditions of pH 10, 30 mg/L of 2-NP and 1.3 g/L of the catalyst. The proposed nanocomposite shows an acceptable reusability and stability against photocorrosion in four-cycle photodegradation experiments.     

Effects of inorganic nanofillers on the thermal degradation and UV-absorbance properties of polyvinyl acetate

The effects of calcium carbonate (CaCO₃) and calcium sulfate (CaSO₄) nanoparticles on the thermal and UV-absorbing properties of polyvinyl acetate (PVAc) were analyzed in this study. Nanoparticles of CaCO₃ and CaSO₄ were synthesized by in situ deposition technique. The size and shape of nanoparticles were recognized by X-ray diffraction and scanning electron microscope (SEM) analyses which confirmed that the particle was having a diameter of 25–33 nm. In this technique, the surface modification of nanoparticles was done by non-ionic polymeric surfactant. PVAc/CaCO₃ and PVAc/CaSO₄ nanocomposites film samples with an average thickness of 30 µm and in the mass ratio of nanoparticles (0–4% (w/w)) were prepared by solution mixing technique. Chemical, structural, and elemental characterizations of nanocomposites were done by, fourier transform infrared, SEM, and energy dispersive X-ray spectroscopy analyses, respectively. Thermal properties of pure polymer and nanocomposites were characterized through differential scanning calorimetric, thermogravimetric, and differential thermogravimetry techniques. The glass transition temperature of nanocomposites increases with increase in content of nanoparticles. It may be due to the interaction between inorganic and organic components. The thermogravimetric analysis results indicate that the thermal degradation temperatures of nanocomposites were enhanced upon the addition of nanosized inorganic fillers. The thermal results show that PVAc/CaSO₄ nanocomposites were more thermally stable than PVAc/CaCO₃ nanocomposites. The addition of nanoparticles affects degradation mechanism and consequently improves thermal stability of PVAc. The reduction of polymer chain mobility and the tendency of nanoparticles to eliminate free radicals were the principal effects responsible for these enhancements. The ultraviolet–visible (UV–Vis) absorbance spectra of PVAc and its nanocomposites films show that the intensity of absorbance increases with increasing filling content, suggesting that nanocomposites films have greater UV-shielding property.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Synthesis and Characterization of the Superparamagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag Nanocomposites

The study of superparamagnetic Fe₃O₄/Ag nanocomposites have received great research attention due to their wide range of potential applications in biomedicine. In this report, an easy microemulsion reaction was employed to synthesis Fe₃O₄/Ag nanocomposites with self-aggregated branch like nanostructures. The Fe₃O₄ nanoparticles were initially prepared and subsequently AgNO₃ was reduced as Ag by chemical reduction method. The results showed that the average size of the Fe₃O₄/Ag nanocomposites were in the range of 10 ± 2 nm. These nanoparticles were self-aggregated as a branch like nanostructure. The optical properties of Fe₃O₄ nanoparticles were modified with surface plasmon resonance of Ag nanoparticles. The observed saturation magnetization of superparamagnetic Fe₃O₄/Ag nanocomposites were 40 emu/g.